Wellhead Equipment Acc. To Api Spec. 6a PDF

WELLHEAD
EQUIPMENT
ACC. TO API SPEC. 6A
SC UPETROM -1MAI SA
1ST December 1918 Square No. 1
Ploiesti, Prahova County, Romania
Phone: +40 244 501 501
+40 244 501 502
Fax: +40 244 501 503
www.upetrom1mai.com
[email protected]
WELLHEAD EQUIPMENT
The UPETROM - 1 MAI S.A. trading company

is the most important oilfield equipment
manufacturer in Romania.
The products manufactured in Ploiesti are greatly
appreciated due to their specifications, appearance
and work performance by lots of specialists
both in the country and more than 30 countries
importing them. The fact that these products
are really appreciated by all their customers
is proved by the keeping of the existing markets
and finding of new others through out the world.
The wellhead equipment manufactured
by UPETROM - 1 MAI S.A. is in accordance with
API Spec. 6A requirements.
Products according to other standards can be also
manufactured on the basis of the customers request.
The UPETROM - 1 MAI S.A. company possesses
the API 6A license and the ISO 9001 one afferent
to this type of equipment.
Manufacturing this equipment and the procedures
of their testing and check meet the requirements
imposed by the international standards.
The wellhead equipment manufactured by UPETROM
can perform and meet the following:
performance specification levels 1 and 2;
performance requirement levels 1 and 2;
material classes: AA, BB, CC, DD, EE;
temperature classes: K, L, P, R, S, T, U.
This catalog describes the common wellhead
equipment manufactured by UPETROM - 1 MAI S.A.
CASING HEAD HOUSING FOR BREDA-TYPE SLIPS AND SEAL

The casing head housing is attached
to the anchoring casing by thread
or welding; there are two design
variants of the casing head housing:
with thread
welded
The casing head housing is provided with threaded or flanged side outlets. In case of
the welded flanges, there is a 1/2" LP test thread.
If requested, the casing head housing is delivered with a landing base for a better stability
of the equipment. The landing base may be used for all casing head housing sizes.
www.upetrom1mai.com
D
C
D
C
Landing base
B
A
CASING HEAD HOUSING SIZES

B
(in)
C
(in)
D
(in)
15.3/4"
8.1/4"
7"
8.29/32"
2.3/8"TBG
15.3/4"
8.1/4"
7.5/6"
8.29/32"
2.3/8"TBG
16.9/16"
9.7/8"
8.3/16"
10.29/32"
9.5/8"
2.3/8"TBG
16.9/16"
9.7/8"
9.3/16"
10.29/32"
10.3/4"
2.3/8"TBG
16.9/16"
9.7/8"
9.15/16"
10.29/32"
10.3/4"
2.3/8"TBG
17.11/16"
9.7/8"
10"
13.3/8"
13.5/8"
11.3/4"
2.3/8"TBG
17.11/16"
9.7/8"
10.15/16"
13.3/8"
13.5/8"
12.3/4"
2.3/8"TBG
17.11/16"
9.7/8"
12"
13.3/8"
13.5/8"
13.3/8"
2.3/8"TBG
17.11/16"
9.7/8"
12.1/2"
13.3/8"
10
16.3/4"
13.3/8"
2.3/8"TBG
18.7/8"
11 "
12.1/2"
16.17/32"
11
16.3/4"
13.3/4"
2.3/8"TBG
18.7/8"
11"
12.15/16"
16.17/32"
12
16.3/4"
14.3/4"
2.3/8"TBG
18.7/8"
11"
13.15/16"
16.17/32"
13
16.3/4"
16"
2.3/8"TBG
18.7/8"
11"
15.1/8"
16.17/32"
14
21.1/4"
18.5/8"
2.3/8"TBG
19.11/16"
11.13/16"
17.5/8 "
20.15/32"
15
21.1/4"
20"
2.3/8"TBG
19.11/16"
11.13/16"
18.15/16"
20.15/32
16
9"
7.5/8"
2.3/8"TBG
17
9"
8.5/8"
18
11"
8.5/8"
2.3/8"TBG
19
11"
9.5/8"
2.3/8"TECN
20
11"
9.5/8"
1/2"LP
21
11"
10.3/4"
22
13.5/8"
10.3/4"
23
13.5/8"
24
25
IT.
UPPER
FLANGE
ANCHORED
CASING
SIDE
OUTLETS
9"
7.5/8"
2.3/8"TBG
9"
8.5/8"
11"
8.5/8"
11"
11"
13.5/8"
7
8
A
(in)
2,000 psi
3,000 psi
15.3/4"
8.1/4"
7"
8.29/32"
15.3/4"
8.1/4"
7.15/16"
8.29/32"
16.9/16"
9.7/8"
8.3/16"
10.29/32"
16.1/2"
10.1/2"
9"
11"
16.1/2"
10.1/2"
9"
11"
2.3/8"TBG
16.1/2"
10.1/2"
9"
11"
2.3/8"TBG
17.11/16"
9.7/8"
10"
13.3/8"
11.3/4"
2.3/8"TBG
17.11/16"
9.7/8"
10.15/16"
13.3/8"
13.5/8"
12.3/4"
2.3/8"TECN
19.11/16"
12.15/16"
12.7/8"
13.11/16"
13.5/8"
12.3/4"
2"LP
19.11/16"
12.15/16"
12.7/8"
13.11/16"
WELLHEAD EQUIPMENT
IT.
UPPER
FLANGE
ANCHORED
CASING
SIDE
OUTLETS
A
(in)
B
(in)
C
(in)
D
(in)
26
13.5/8"
12.3/4"
2.1/16"
22"
12.15/16"
12.7/8"
13.11/16"
27
13.5/8"
13.3/8"
2.3/8"TBG
17.11/16"
9.7/8"
12.1/2"
13.3/8"
28
16.3/4"
13.3/4"
2.3/8"TBG
18.7/8"
11"
12.15/16"
16.17/32"
29
16.3/4"
14.3/4"
2.3/8"TBG
18.7/8"
11"
13.15/16"
16.17/32"
30
16.3/4"
16"
2.3/8"TBG
18.7/8"
11"
15.1/8"
16.17/32"
31
16.3/4"
16.3/4"
2.3/8"TECN
22"
15.3/4"
15.3/4"
16.15/16"
32
20.3/4"
18.5/8"
2.3/8"TBG
19.11/16"
11.13/16"
17.5/8"
20.15/32"
33
20.3/4"
20"
2"LP
19.11/16"
12.15/16"
16.1/8"
19.7/8
5,000 psi
34
11"
8.5/8"
2.3/8"TBG
17.11/16"
9.7/8"
8.3/16"
10.29/32"
35
11"
9.5/8"
2.3/8"TBG
17.11/16"
9.7/8"
9.3/16"
10.29/32"
36
11"
10.3/4"
2.3/8"TBG
17.11/16"
9.7/8"
9.15/16"
10.29/32"
37
13.5/8"
11.3/4"
2.3/8"TECN
19.11/16"
12.15/16"
12.7/8"
13.11/16"
38
13.5/8"
12.3/4"
2"LP
19.11/16"
12.15/16"
12.7/8"
13.11/16"
39
13.5/8"
13.3/8"
2.3/8"TBG
17.11/16"
9.7/8"
12.1/2"
13.3/8"
40
16.3/4"
16"
2.3/8"TBG
19.11/16"
11.13/16"
15.1/8"
16.17/32
CASING HEAD HOUSING ASSEMBLY

WITH SLIPS AND BREDA-TYPE SEAL
Breda-type
primary seal
Breda-type
Slip assembly
Casing head
housing
Anchored
casing
www.upetrom1mai.com
BREDA-TYPE SEALS
A
The casing head housing use primary seals located over the BREDA - type slip
for sealing the suspended casing. The BREDA-type seals may be used up to
a pressure of 10000 psi (included).
BREDA-TYPE PRIMARY SEAL SIZES

IT.
PRIMARY SEAL SIZE

(in)
SEALED CASING SIZE

(in)
A
(in)
5.1/2"
5.1/2"
5.1/2"
9"
5.1/2"
5.1/2"
5.1/2"
11"
5.3/4"
5.3/4"
5.3/4"
11"
6.5/8"
6.5/8"
6.5/8"
11"
7"
7"
7"
11"
8.5/8"
8.5/8"
8.5/8"
13.5/8"
9.5/8"
9.5/8"
9.5/8"
13.5/8"
12.3/4"
12.3/4"
12.3/4"
16.7/8"
13.3/8"
13.3/8"
13.3/8"
19.7/8
BREDA-TYPE SLIP
ASSEMBLY
The BREDA-type slip
assembly is used for
suspending the production
casing up to a pressure of
10000 psi (included).
OD
B
(in)
BREDA-TYPE SLIP SIZES

IT.
FLANGE SIZE
(in)
CASING SIZE
(in)
OD
(in)
9"
4.1/2"
8.9/16"
9"
5"
8.9/16"
9"
5.1/2"
8.9/16"
9"
5.3/4"
8.9/16"
9"
6"
8.9/16"
11"
4.1/2"
10.5/16"
11"
5"
10.5/16"
11"
5.1/2"
10.5/16"
11"
5.3/4"
10.5/16"
10
11"
6"
10.5/16"
11
11"
6.5/8"
10.5/16"
12
11"
7"
10.5/16"
13
13.5/8"
7"
13.3/16"
14
13.5/8"
7.5/8"
13.3/16"
15
13.5/8"
8.5/8"
13.3/16"
16
13.5/8"
9.5/8"
13.3/16"
WELLHEAD EQUIPMENT
BREDA-TYPE SLIP SIZE

FLANGE SIZE
(in)
CASING SIZE
(in)
OD
(in)
17
13.5/8"
10.3/4"
13.3/16"
18
16.3/4"
9.5/8"
16.1/8"
19
16.3/4"
10.3/4"
16.1/8"
20
16.3/4"
11.3/4"
16.1/8"
21
16.3/4"
12.3/4"
16.1/8"
22
20.3/4" and 21.1/4"
12.3/4"
19.11/16"
23
20.3/4" and 21.1/4"
13.3/8"
19.11/16"
24
20.3/4" and 21.1/4"
13.3/4"
19.11/16"
25
20.3/4" and 21.1/4"
14.3/4"
19.11/16"
26
20.3/4" and 21.1/4"
16"
19.11/16"
IT.
CASING HEAD HOUSING ASSEMBLY

WITH SLIPS AND C22-TYPE SEAL
C22-type
slip
assembly
Casing
head
housing
Anchored
casing
www.upetrom1mai.com
CASING HEAD HOUSING FOR C22-TYPE SLIP

AND SEAL ASSEMBLY
The casing head housing may be provided with threaded or flanged side
outlets. In case of the welded flanges, there is a 1/2" LP test thread, too.
The casing head housing is sometimes

delivered with a landing base for a better
stability of the equipment.
The C22-type slip assembly is used for a large range of production casing.
Landing base
B
A
CASING HEAD HOUSING SIZES

IT.
TOP FLANGE
SIZE
(in)
ANCHORED
CASING SIZE
(in)
SIDE
OUTLETS
11"
5.3/4"
11"
11"
A
(in)
B
(in)
C
(in)
19.3/4"
9.1/4"
9.1/2"
8"
2"LP
17.1/8"
8.1/4"
10.7/8"
8"
2"LP
17"
9.1/4"
10.7/8"
3,000 psi
11"
8"
2"LP
16"
9.5/16"
13.1/2"
11"
8"
2"LP
17"
9.1/4"
10.7/8"
11"
8"
2"LP
17.5/16"
9.1/4"
13.1/2"
17.1/8"
11.11/16"
11"
17.1/8
11.11/16
11
11"
9.5/8"
11
10.3/4"
2"LP
5,000 psi
13.5/8"
8"
2"LP
17.1/2"
10.11/16"
13.1/2"
10
13.5/8"
8"
2"LP
17.3/4"
10.5/16"
13.1/2"
11
11"
8"
2.1/16" x 5000
18.3/4"
11.3/4"
10.7/8"
12
11"
8"
2.1/16" x 5000
21"
11.3/4"
10.7/8
Data to be put down in the inquiry:

casing head housing type;
rated size and pressure;
side outlet type and size
(if they are different from the standard);
suspended casing size;
anchored casing size and connection type;

with / without landing base
(as requested);
temperature and service conditions;
PSL and PR.
WELLHEAD EQUIPMENT
C22-TYPE SLIP
ASSEMBLY
The C22-type slip assembly includes

both the production casing sustaining
slips and seal.
OD
Sustaining and sealing the casing

are simultaneously ensured.
C22-TYPE SLIP SIZES
CASING HEAD
SPOOL ASSEMBLY
WITH SLIPS &
BREDA-TYPE SEAL
IT.
CASING HEAD
HOUSING SIZE
(in)
CASING SIZE
(in)
OD
(in)
11"
4.1/2"
10.7/8"
11"
5.1/2"
10.7/8"
10.7/8"
11"
7"
13.5/8"
8.5/8"
13.3/8"
13.5/8"
9.5/8"
13.3/8
Breda-type
Primary seal
Breda-type
Slip assembly
Casing head
spool
Guide
Breda-type
Secondary seal
www.upetrom1mai.com
CASING HEAD SPOOL FOR BREDA-TYPE SLIPS & SEAL

D
C
The casing head spool is set over the casing head housing and consists of a slip
assembly and primary and secondary seals for sustaining and sealing the production
casing. The side outlets may be flanged or threaded, as requested.

spool or crossover spool type;
size and rated pressure of the top flange,
bottom flange
and side flanges as well as size and rated;
pressure of the spool and crossover spool,
if they differ from the values
given by the standards;
slip assembly type and size;

secondary seal size
and type;
primary seal size and type;
temperature and service
conditions;
PSL and PR levels.
CASING HEAD SPOOL SIZES

IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in x psi)
A
(in)
B
(in)
C
(in)
D
(in)
20.1/2"
9.7/8"
7.15/16"
9"
2,000 psi
1
11" x 2,000
9" x 2,000
2.1/16" x 2,000
1,9"TBG
11" x 2,000
11" x 2,000
2.1/16" x 2,000
1,9"TBG
21.1/4"
10.5/8"
8.7/8"
11"
13.5/8" x 2,000
9" x 2,000
2.1/16" x 2,000
1,9"TBG
20.1/2"
9.7/8"
7.5/16"
9"
13.5/8" x 2,000
11" x 2,000
2.1/16" x 2,000
1,9"TBG
21.1/4"
10.5/8"
9.5/8"
11"
13.5/8" x 2,000
13.5/8" x 2,000
2.1/16" x 2,000
1,9"TBG
23.5/8"
11.13/16"
10.15/16"
13.11/16"
16.3/4" x 2,000
11" x 2,000
2.1/16" x 2,000
1,9"TBG
23.5/8"
10.5/8"
9.5/8"
11"
16.3/4" x 2,000
13.5/8" x 2,000
2.1/16" x 2,000
1,9"TBG
24.7/16"
11.13/16"
12.1/2"
13.11/16"
21.1/4" x 2,000
16.3/4" x 2,000
2.1/16" x 2,000
1,9"TBG
26"
14.3/16
15.1/8"
16.3/4
3,000 psi
9
11" x 2,000
9" x 3,000
2.1/16" x 3,000
1,9"TBG
20.1/2"
9.7/8"
7.15/16"
9"
10
11" x 2,000
11" x 3,000
21.1/4"
10.5/8"
8.7/8"
11"
11
11" x 3,000
9" x 3,000
2.1/16" x 3,000
1,9"TBG
20.1/2"
9.7/8"
7.15/16"
9"
WELLHEAD EQUIPMENT
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in x psi)
A
(in)
B
(in)
C
(in)
D
(in)
12
11" x 3,000
11" x 3,000
2.1/16" x 3,000
1,9"TBG
21.1/4"
10.5/8"
8.7/8"
11"
13
13.5/8" x 2,000
9" x 3,000
2.1/16" x 3,000
1,9"TBG
20.1/2"
9.7/8"
7.15/16"
9"
14
13.5/8" x 2,000
11" x 3,000
2.1/16" x 3,000
1,9"TBG
21.1/4"
10.5/8"
9.5/8"
11"
15
13.5/8" x 2,000
13.5/8" x 3,000
2.1/16" x3,000
1,9"TBG
23.5/8"
11.13/16"
10.15/16"
13.11/16"
16
13.5/8" x 3,000
9" x 3,000
2.1/16" x 3,000
1,9"TBG
20.1/2
9.7/8"
7.15/16
17
13.5/8" x 3,000
11" x 3,000
2.1/16" x 3,000
1,9"TBG
21.1/4"
10.5/8"
9.5/8"
11"
18
13.5/8" x 3,000
13.5/8" x 3,000
2.1/16" x 3,000
1,9"TBG
23.5/8"
11.13/16"
10.15/16"
13.11/16"
19
16.3/4" x 2,000
11" x 3,000
2.1/16" x 3,000
1,9"TBG
23.5/8"
10.5/8"
9.5/8"
11"
20
16.3/4" x 2,000
13.5/8" x 3,000
2.1/16" x 3,000
1,9"TBG
24.7/16"
11.13/16"
12.1/2"
13.11/16"
21
16.3/4" x 3,000
11" x 3,000
2.1/16" x 3,000
1,9"TBG
23.5/8"
10.5/8"
9.5/8"
11"
22
16.3/4" x 3,000
13.5/8" x 3,000
2.1/16" x 3,000
1,9"TBG
24.7/16"
11.13/16"
12.1/2"
13.11/16"
23
21.1/4" x 2,000
13.5/8" x 3,000
2.1/16" x 3,000
1,9"TBG
25.5/8"
11.13/16"
12.1/2"
13.11/16"
24
21.1/4" x 2,000
16.3/4" x 3,000
2.1/16" x 3,000
1,9"TBG
26"
14.3/16"
14.15/16"
16.3/4"
25
20.3/4" x 3,000
13.5/8" x 3,000
25.5/8"
11.13/16
12.1/2"
13.11/16
24.7/16"
12.5/8"
8.7/8"
11"
5,000 psi
26
11" x 3,000
11" x 5,000
2.1/16" x 5,000
1,9"TBG
27
11" x 5,000
11" x 5,000
2.1/16" x 5,000
1,9"TBG
26.3/4"
12.5/8"
8.7/8"
11"
28
13.5/8" x 3,000
11" x 5,000
2.1/16" x 5,000
1,9"TBG
24.7/16"
13.5/16"
9.5/16"
11"
29
13.5/8" x 5,000
11" x 5,000
2.1/16" x 5,000
1,9"TBG
26.3/4"
12.5/8"
8.7/8"
11"
30
13.5/8" x 5,000
13.5/8" x 5,000
2.1/16" x 5,000
1,9"TBG
24.5/8"
11.13/16"
10.15/16"
13.11/16"
31
16.3/4" x 3,000
11" x 5,000
2.1/16" x 5,000
1,9"TBG
24.13/16"
13"
9.5/8"
11"
32
16.3/4" x 3,000
13.5/8" x 5,000
2.1/16" x 5,000
1,9"TBG
24.7/16"
11.11/16"
12.1/2"
13.11/16"
33
20.3/4" x 3,000
13.5/8" x 5,000
2.1/16" x 5,000
1,9"TBG
24.7/16
11.11/16"
12.1/2"
13.11/16
www.upetrom1mai.com
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in x psi)
A
(in)
B
(in)
C
(in)
D
(in)
10,000 psi
34
11" x 5,000
11" x 10,000
2.1/16" x 10,000
1,9"TBG
26"
13.3/8"
8.7/8"
11"
35
11" x 10,000
11" x 10,000
2.1/16" x 10,000
1,9"TBG
27.3/16"
13.3/8"
8.7/8"
11"
36
13.5/8" x 10,000
9" x 10,000
2.1/16" x 10,000
1,9"TBG
26"
11.13/16"
7.5/8"
9"
37
13.5/8" x 5,000
11" x 10,000
2.1/16" x 10,000
1,9"TBG
26"
13.3/8"
9.3/8"
11"
38
13.5/8" x 10,000
11" x 10,000
2.1/16" x 10,000
1,9"TBG
27.3/16"
13.3/8"
8.7/8"
11"
39
13.5/8" x 5,000
13.5/8" x 10,000
2.1/16" x 10,000
1,9"TBG
26"
14.3/16"
10.1/16"
13.11/16"
40
13.5/8" x 10,000
13.5/8" x 10,000
2.1/16" x 10,000
1,9"TBG
19.11/16"
13.3/4"
9.1/5"
11"
41
16.3/4" x 5,000
13.5/8" x 10,000
2.1/16" x 10,000
1,9"TBG
27"
14.13/16
10.15/16
13.11/16
CASING HEAD SPOOL WITH C22-TYPE SLIP ASSEMBLY

Secondary seal of BREDA or PP type. In case of the PP-type secondary seal use,
a cone valve shall be also utilized.
C22-type
slip assembly
Casing head
spool
Guide
Breda-type
Secondary seal
WELLHEAD EQUIPMENT
CASING HEAD SPOOL FOR C22-TYPE SLIP

AND SEAL ASSEMBLY
CASING HEAD SPOOL SIZES
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
11" x 3,000
7.1/16" x 3,000
2.1/16"
22.1/2"
11.7/8"
7"
7.1 /8"
11" x 3,000
7.1/16" x 3,000
2.1/16"
20.7/8"
10.1/8"
7"
7.1/8"
11" x 3,000
11" x 3,000
2.1/16"
23.13/16"
13.1/4"
10"
10.7/8"
11" x 3,000
11" x 3,000
2.1/16"
23.13/16"
11"
10"
10.7/8"
13.5/8" x 3,000
11" x 3,000
2.1/16"
23.15/16"
11.15/16"
9.15/16"
10.7/8"
13.5/8 x 3,000
11" x 3,000
2.1/16"
21.1/8"
10.1/2"
9.15/16"
10.7/8"
11" x 3,000
7.1/16" x 5,000
2.1/16"
22.1/4"
11.7/8"
6.5/16"
7.1/8"
11" x 3,000
7.1/16" x 5,000
2.1/16"
22.5/16"
11.11/16"
7"
7.1/8"
11" x 3,000
11" x 5,000
2.1/16"
23.7/8"
13.5/16"
10"
10.7/8"
10
11" x 5,000
7.1/16" x 5,000
2.1/16"
24.7/16"
11.1/8"
7"
7.1/8"
11
11" x 5,000
7.1/16" x 5,000
2.1/16"
24.1/2"
12.11/16"
7"
7.1/8"
12
11" x 5,000
11" x 5,000
2.1/16"
24.5/16"
12.1/8"
10"
10.7/8"
13
11" x 5,000
11" x 5,000
2.1/16"
24.5/16"
14"
10"
10.7/8
D
C
spool or crossover spool type;
slip assembly type and size;
bottom flange and side flanges as well as size
and rated pressure of the spool and crossover
spool, if they differ from the values
secondary seal size and type;
primary seal size and type;
PSL and PR levels.
www.upetrom1mai.com
BREDA-TYPE
SECONDARY
SEALS
OD
BREDA-TYPE SECONDARY SEAL SIZES

IT.
FLANGE SIZE
(in)
CASING SIZE
(in)
OD
(in)
9"
4.1/2"
7.1/16"
9"
5"
7.7/8"
9"
5.1/2"
7.1/4"
9"
5.3/4"
7.7/8"
9"
6.5/8"
9"
11"
4.1/2"
9.1/16"
11"
5"
9.1/16"
11"
5.1/2"
9.1/16"
11"
5.3/4"
9.1/16"
10
11"
6"
9.1/16"
11
11"
6.5/8"
8.1/2, 9.1/16"
12
11"
7"
9.1/16"
13
11"
7.5/8"
9.1/16"
14
13.5/8"
6.5/8"
11"
11"
15
13.5/8"
7"
16
13.5/8"
7.5/8"
11"
17
13.5/8"
8.5/8"
11.1/4"
18
13.5/8"
9.5/8"
11.1/8"
19
16.3/4"
8.5/8"
13.5/8"
20
16.3/4"
9.5/8"
13.5/8"
21
16.3/4"
10.3/4"
13.5/8"
22
16.3/4"
11.3/4"
13.5/8"
23
16.3/4"
12.3/4"
14.15/16"
24
20.3/4", 21.1/4"
12.3/4"
17.7/6"
25
20.3/4", 21.1/4"
13.3/8"
17.7/6"
26
20.3/4", 21.1/4"
13.3/4"
17.7/6"
27
20.3/4", 21.1/4"
14.3/4"
17.7/6"
28
20.3/4", 21.1/4"
16"
17.7/6"
29
20.3/4", 21.1/4"
20"
15.13/16
WELLHEAD EQUIPMENT
PP-TYPE DUAL
SECONDARY SEALS
PP-TYPE
SECONDARY SEALS
PP-TYPE DUAL SECONDARY SEAL SIZES
PP-TYPE SECONDARY SEAL SIZES

IT.
FLANGE SIZE
(in)
CASING SIZE
(in)
OD
(in)
IT.
CASING SIZE
(in)
ID
(in)
9"
4.1/2"
7.1/16"
3.1/2"
3.1/16"
9"
5"
9"
4.1/2"
4"
9"
5.1/2"
9"
5"
4.15/32"
9"
5.3/4"
9"
5.1/2"
5.1/2"
9"
6"
9"
5.3/4"
5.1/2"
11"
4.1/2"
9.1/16"
6"
5.5/16"
11"
5"
9.1/16"
6.5/8"
5.15/16"
11"
5.1/2"
8.1/2"
7"
6.7/16"
11"
5.3/4"
8.1/2"
7.5/8"
6.15/16"
10
11"
6"
11"
10
8.5/8"
7.15/16"
11
11"
6.5/8"
11"
11
9.5/8"
9.1/2"
12
11"
7"
11"
12
10.3/4"
9.15/16"
13
13.5/8"
7"
13.11/16"
13
11.3/4"
10.7/8"
14
13.5/8"
7.5/8"
13.11/16"
14
12.3/4"
11.15/16"
15
13.5/8"
8.5/8"
13.11/16"
15
13.3/8"
12.1/2
16
13.5/8"
9.5/8"
13.11/16"
17
16.3/4"
9.5/8"
16.3/4"
18
16.3/4"
10.3/4"
16.3/4
19
16.3/4"
11.3/4"
16.3/4"
20
20.3/4", 21.1/4"
12.3/4"
20.9/32"
21
20.3/4", 21.1/4"
13.3/8"
20.9/32"
22
20.3/4", 21.1/4"
13.3/4"
20.9/32
www.upetrom1mai.com
T1-MODEL TUBING HEAD

Our personnel uses T1-tubing heads as the most utilized
in case of small pressure values of 2000 psi, 3000 psi and 5000 psi.
T1-TYPE TUBING SPOOL,

CROSSOVER SPOOL
Bonnet
D
C
Tubing hanger
B
Tubing head spool
A
Guide
Breda-type
secondary seal
TUBING SPOOL SIZES

IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
2,000 psi
1
9" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
17.3/4"
8.1/4"
6"
6.15/16"
9" x 2,000
7.1/16" x 2,000
3.1/8"
18.1/8"
8.1/16"
6"
6.15/16"
11" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
20.1/16"
8.1/4"
6"
6.15/16"
11" x 2,000
7.1/16" x 2,000
3.1/8"
21.1/4"
8.11/16"
6"
6.15/16"
13.5/8" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
3.1/8
21.1/4"
8.11/16
6.15/16
WELLHEAD EQUIPMENT
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
3,000 psi
6
9" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
19.1/4"
9"
7"
9" x 2,000
7.1/16" x 3,000
3.1/8"
22.1/16"
9.7/8"
7"
9" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
19.1/4"
9"
7"
9" x 3,000
7.1/16" x 3,000
3.1/8"
22.1/16"
9.7/8"
7"
10
11" x 2,000
7.1/16" x 3,000
2.1/16"
17.3/4"
7.7/8"
7"
22.1/16"
9.7/8"
7"
11
11" x 2,000
7.1/16" x 3,000
2.9/16"
3.1/8"
12
11" x 3,000
7.1/16" x 3,000
2.1/16"
19.11/16
13
11" x 3,000
7.1/16" x 3,000
2.9/16"
3.1/8"
22.1/16"
9.7/8"
6"
7"
14
13.5/8" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8"
22.13/16"
9.7/8"
6"
6.15/16"
15
11" x 3,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16"
26"
12.5/8"
7.5/8"
8.7/8"
16
13.5/8" x 3,000
9" x 3,000
2.1/16"
2.9/16"
3.1/8"
4.1/16
26.3/8"
12.5/8"
7.5/8
8.7/8
17
11" x 3,000
7.1/16" x 5,000
2.1/16"
20"
9.1/2"
6"
7"
18
11" x 3,000
7.1/16" x 5,000
2.9/16"
3.1/8"
26.3/4"
12.3/16"
6"
6.15/16"
19
11" x 5,000
7.1/16" x 5,000
2.1/16"
21.7/8"
10"
6"
7"
20
11" x 5,000
7.1/16" x 5,000
2.9/16"
21.7/8"
10.7/8"
6"
7"
21
11" x 5,000
7.1/16" x 5,000
3.1/8"
26.3/4"
12.3/16"
6"
7"
30.5/16"
14.9/16"
7.5/8"
8.7/8"
30.5/16
14.9/16
7.5/8
8.7/8
5,000 psi
22
11" x 3,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16"
23
11" x 5,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16

adapter pressure and size;
bottom flange and side flanges as well
as size and rated pressure of the spool and
crossover spool, if they differ from the values
tubing spool or crossover

spool type;
tubing hanger type and size;
PSL and PR levels.
www.upetrom1mai.com
T1-TYPE TUBING HANGER

(THREADED END CONNECTION WITH FIXING NUT)
AND T1-TYPE BONNET
This hanger is used for a pressure value

up to 5000 psi and attached to the tubing
spool by means of the special nut.
OD
HANGER SIZES
IT.
FLANGE SIZE
(in)
HANGER THREAD
(in)
OD
(in)
7.1/16"
2.3/8"TBG
7"
7.1/16"
2.3/8"UPTBG
7"
7.1/16"
2.7/8"TBG
7"
7.1/16"
2.7/8"UPTBG
7"
7.1/16"
3.1/2"TBG
7"
7.1/16"
3.1/2"UPTBG
7"
9"
3.1/2"TBG
8.3/4"
9"
3.1/2"UPTBG
8.3/4
IT.
BOTTOM FLANGE SIZE

(in x psi)
TOP FLANGE SIZE

(in x psi)
ID
(in)
7.1/16" x 2,000
2.1/16" x 2,000
2.1/16"
7.1/16" x 2,000
2.9/16" x 2,000
2.9/16"
7.1/16" x 2,000
3.1/8" x 2,000
3.1/8"
7.1/16" x 3,000
2.1/16" x 3,000
2.1/16"
7.1/16" x 3,000
2.9/16" x 3,000
2.9/16"
7.1/16" x 3,000
3.1/8" x 3,000
3.1/8"
7.1/16" x 5,000
2.1/16" x 5,000
2.1/16"
7.1/16" x 5,000
2.9/16 x 5,000
2.9/16"
BONNET SIZES
7.1/16" x 5,000
3.1/8" x 5,000
3.1/8"
10
9 x 2,000
3.1/8" x 2,000
3.1/8"
11
9 x 2,000
4.1/16" x 2,000
4.1/16"
12
9" x 3,000
3.1/8" x 3,000
3.1/8"
13
9" x 3,000
4.1/16" x 3,000
4.1/16"
14
9" x 5,000
3.1/8" x 5,000
3.1/8"
15
9" x 5,000
4.1/16" x 5,000
4.1/16
The bonnet belongs to the tubing head

and it is located over the tubing spool.
It may be either simple or inner-thread
provided.
WELLHEAD EQUIPMENT

Bonnet
Hanger
Lock down
screw
Lock down
screw
Tubing
spool
Guide
Breda-type
secondary
seal
T2-TYPE TUBING SPOOL, CROSSOVER SPOOL

The tubing spool is provided with flanged or threaded side outlets.
A BREDA or PP type seal may be used as a secondary one.

tubing spool or crossover spool type;
size and rated pressure of the top flange, bottom flange and side flanges
as well as size and rated pressure of the spool and crossover spool,
if they differ from the values given by the standards;
bonnet pressure and size;
PSL and PR levels.
www.upetrom1mai.com
TUBING SPOOL SIZES

IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
2,000 psi
1
9" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
17.3/4"
8.1/4"
6.3/8
9" x 2,000
7.1/16" x 2,000
3.1/8"
18.1/8"
8.11/16"
6.3/8
11" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
20.1/16"
8.1/4"
6.3/8
11" x 2,000
7.1/16" x 2,000
3.1/8"
21.1/4"
8.11/16"
6.3/8
13.5/8" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
3.1/8
21.1/4"
8.11/16
6.3/8
11" x 2,000
9" x 2,000
2.9/16"
3.1/8"
4.1/16
22.1/16"
10.5/8"
7.13/16"
8.29/32"
13.5/8" x 2,000
9" x 2,000
2.9/16"
3.1/8"
4.1/16
22.1/16"
10.5/8"
7.13/16"
8.29/32"
3,000 psi
8
9" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
9" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
10
11" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
11
11" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
12
13.5/8" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.13/16"
9.7/8"
6.3/8"
7"
13
13.5/8" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.13/16"
9.7/8"
6.3/8"
7"
14
11" x 2,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26"
12.5/8"
6.3/8"
7"
15
11" x 3,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26"
12.5/8"
7.13/16"
8.29/32"
16
13.5/8" x 3,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26.3/8"
12.5/8"
7.13/16"
8.29/32"
WELLHEAD EQUIPMENT
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
17
13.5/8" x 3,000
11" x 3,000
2.1/16"
2.9/16"
3.1/8
24.3/8"
11.13/16
9.15/16
10.29/32
5,000 psi
18
9" x 3,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
25.3/16"
12.3/16"
6.3/8"
7"
19
9" x 5,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
25.3/16"
12.3/16"
6.3/8"
7"
20
11" x 3,000
7.1/16" x 5,000
2.1/16"
23.5/8"
10.5/8"
6.3/8"
7"
21
11" x 3,000
7.1/16" x 5,000
2.9/16"
3.1/8"
26.3/4"
12.3/16"
6.3/8"
7"
22
11" x 5,000
7.1/16" x 5,000
2.1/16"
21.7/8"
10"
6.3/8"
7"
26.3/4"
12.3/16"
6.3/8"
7"
23
11" x 5,000
7.1/16" x 5,000
2.9/16"
3.1/8"
24
13.5/8" x 3,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
24.13/16"
12.3/16"
6.3/8"
7"
25
11" x 3,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16
30.5/16"
14.9/16"
7.13/16"
8.29/32"
26
11" x 5,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16
30.5/16"
14.9/16"
7.13/16"
8.29/32"
27
13.5/8" x 3,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16
30.5/16
14.9/16
7.13/16
8.29/32
10,000 psi
28
9" x 5,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
29
9" x 10,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
30
11" x 5,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
31
11" x 10,000
7.1/16" x 10,000
2.1/16"
25.3/16"
12.3/16"
6.1/8"
7"
32
11" x 10,000
7.1/16" x 10,000
2.9/16"
26.3/8"
12.3/16"
6.1/8"
7"
33
11" x 5,000
9" x 10,000
2.1/16"
2.9/16"
3.1/16"
28.3/4"
13.3/4"
7.5/8"
8.29/32"
34
11" x 10,000
9" x 10,000
2.1/16"
2.9/16"
3.1/16"
28.3/4"
13.3/4"
7.5/8"
8.29/32
www.upetrom1mai.com
T2-TYPE TUBING HANGER
T2-TYPE BONNET
These tubing hangers may be equipped

with threads for the backpressure valves.
The bonnet ensures a size reduction between the top flange of the spool
and the flange of the master valve. The bonnet includes a seat for the
above-mentioned hangers and a ball valve to control the pressure values
between the bonnet and the spool.
BONNET SIZES
OD
TUBING HANGER SIZES

IT.
FLANGE
SIZE
(in)
HANGER
THREAD
(in)
OD
(in.)
7.1/16"
2.3/8"TBG
7"
7.1/16"
2.3/8"UPTBG
7"
7.1/16"
2.7/8"TBG
7"
7.1/16"
2.7/8"UPTBG
7"
7.1/16"
3.1/2"TBG
7"
7.1/16"
3.1/2"UPTBG
7"
9"
3.1/2"TBG
8.7/8"
9"
3.1/2"UPTBG
8.7/8
Other design types of hangers

may be utilized depending
on the customer's requirements.
This type of hanger provides sealing
into the bonnet (Breda-type sealing)
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
ID
(in)
A
(in)
7.1/16" x 2,000
2.1/16" x 2,000
2.1/16"
6.7/8"
7.1/16" x 2,000
2.9/16" x 2,000
2.9/16"
6.7/8"
7.1/16" x 2,000
3.1/8" x 2,000
3.1/8"
5.11/16"
7.1/16" x 3,000
2.1/16" x 3,000
2.1/16"
6.7/8"
7.1/16" x 3,000
2.9/16" x 3,000
2.9/16"
6.7/8"
7.1/16" x 3,000
3.1/8" x 3,000
3.1/8"
6.7/8"
7.1/16" x 3,000
2.1/16" x 5,000
2.1/16"
5.1/8"
7.1/16" x 3,000
2.9/16" x 5,000
2.9/16"
5.1/8"
7.1/16" x 3,000
3.1/8" x 5,000
3.1/8"
5.1/8"
10
7.1/16" x 5,000
2.1/16" x 5,000
2.1/16"
6.7/8"
11
7.1/16" x 5,000
2.9/16" x 5,000
2.9/16"
6.7/8"
12
7.1/16" x 5,000
3.1/8" x 5,000
3.1/8"
6.7/8"
13
7.1/16" x 5,000
2.1/16" x 10,000
2.1/16"
5.1/8"
14
7.1/16" x 5,000
2.9/16" x 10,000
2.9/16"
5.1/8"
15
7.1/16" x 5,000
3.1/16" x 10,000
3.1/16"
5.1/8"
16
7.1/16" x 10,000
2.1/16" x 10,000
2.1/16"
6.7/8"
17
7.1/16" x 10,000
2.9/16" x 10,000
2.9/16"
7"
18
7.1/16" x 10,000
3.1/16" x 10,000
3.1/16"
7"
19
9" x 2,000
3.1/8" x 2,000
3.1/8"
8.11/16"
20
9" x 2,000
4.1/16" x 2,000
4.1/16"
8.11/16"
21
9" x 3,000
3.1/8" x 3,000
3.1/8"
8.11/16"
22
9" x 3,000
4.1/16" x 3,000
4.1/16"
8.11/16"
7.1/16"
23
9" x 3,000
3.1/8" x 5,000
3.1/8"
24
9" x 3,000
4.1/16" x 5,000
4.1/16"
7.1/16"
25
9" x 5,000
3.1/8" x 5,000
3.1/8"
8.11/16"
26
9" x 5,000
4.1/16" x 5,000
4.1/16"
8.11/16"
27
9" x 5,000
3.1/16" x 10,000
3.1/16"
7.1/16"
28
9" x 5,000
4.1/16" x 10,000
4.1/16"
7.1/16"
29
9" x 10,000
3.1/16" x 10,000
3.1/16"
8.11/16"
30
9" x 10,000
4.1/16" x 10,000
4.1/16"
8.11/16
ID
WELLHEAD EQUIPMENT

This type of tubing hanger is used for
pressure values ranging between 2000
psi and 10,000 psi, being specially
utilized for 10,000 psi. The tubing hanger
is attached to the bonnet.
The tubing head includes the tubing
sealing element. The tubing sealing
element is located into the spool and
fixed by means of the lock screws.
Sealing the bonnet and hanger is made
by compression which is in its turn got
by the hanger weight. The tubing sealing
element seals the annular space
between the tubing and tubing spool and
permits the tubing to be temporarily
suspended. The secondary seal may be
BREDA or PP-type.
T3-TYPE TUBING SPOOL,

CROSSOVER SPOOL
The tubing spool is provided with flanged
or threaded side outlets.
A BREDA or PP-type seal may be used
as a secondary one.
tubing spool or crossover spool type;
bottom flange and side flanges as well
as size and rated pressure of the spool and
crossover spool, if they differ from the values
bonnet pressure and size;
PSL and PR levels.
www.upetrom1mai.com
TUBING SPOOL SIZES

IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
2.1/16"
2.9/16"
A
(in)
B
(in)
C
(in)
D
(in)
17.3/4"
8.1/4"
6.3/8
2,000 psi
1
9" x 2,000
7.1/16" x 2,000
9" x 2,000
7.1/16" x 2,000
3.1/8"
18.1/8"
8.11/16"
6.3/8
2.1/16"
2.9/16"
20.1/16"
8.1/4"
6.3/8
11" x 2,000
7.1/16" x 2,000
11" x 2,000
7.1/16" x 2,000
3.1/8"
21.1/4"
8.11/16"
6.3/8
21.1/4"
8.11/16
6.3/8
13.5/8" x 2,000
7.1/16" x 2,000
2.1/16"
2.9/16"
3.1/8
11" x 2,000
9" x 2,000
2.9/16"
3.1/8"
4.1/16
22.1/16"
10.5/8"
7.13/16"
8.29/32"
13.5/8" x 2,000
9" x 2,000
2.9/16"
3.1/8"
4.1/16
22.1/16"
10.5/8"
7.13/16"
8.29/32"
3,000 psi
8
9" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
9" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
10
11" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
11
11" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.1/16"
9.7/8"
6.3/8"
7"
12
13.5/8" x 2,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.13/16"
9.7/8"
6.3/8"
7"
13
13.5/8" x 3,000
7.1/16" x 3,000
2.1/16"
2.9/16"
3.1/8
22.13/16"
9.7/8"
6.3/8"
7"
14
11" x 2,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26"
12.5/8"
6.3/8"
7"
15
11" x 3,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26"
12.5/8"
7.13/16"
8.29/32"
16
13.5/8" x 3,000
9" x 3,000
2.9/16"
3.1/8"
4.1/16
26.3/8"
12.5/8"
7.13/16"
8.29/32"
WELLHEAD EQUIPMENT
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
SIDE OUTLETS
(in)
A
(in)
B
(in)
C
(in)
D
(in)
17
13.5/8" x 3,000
11" x 3,000
2.1/16"
2.9/16"
3.1/8
24.3/8"
11.13/16
9.15/16
10.29/32
5,000 psi
18
9" x 3,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
25.3/16"
12.3/16"
6.3/8"
7"
19
9" x 5,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
25.3/16"
12.3/16"
6.3/8"
7"
20
11" x 3,000
7.1/16" x 5,000
2.1/16"
23.5/8"
10.5/8"
6.3/8"
7"
21
11" x 3,000
7.1/16" x 5,000
2.9/16"
3.1/8"
26.3/4"
12.3/16"
6.3/8"
7"
22
11" x 5,000
7.1/16" x 5,000
2.1/16"
21.7/8"
10"
6.3/8"
7"
26.3/4"
12.3/16"
6.3/8"
7"
23
11" x 5,000
7.1/16" x 5,000
2.9/16"
3.1/8"
24
13.5/8" x 3,000
7.1/16" x 5,000
2.1/16"
2.9/16"
3.1/8"
24.13/16"
12.3/16"
6.3/8"
7"
25
11" x 3,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16 "
30.5/16"
14.9/16"
7.13/16"
8.29/32"
26
11" x 5,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16
30.5/16"
14.9/16"
7.13/16"
8.29/32"
27
13.5/8" x 3,000
9" x 5,000
2.9/16"
3.1/8"
4.1/16
30.5/16
14.9/16
7.13/16
8.29/32
10,000 psi
28
9" x 5,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
29
9" x 10,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
30
11" x 5,000
7.1/16" x 10,000
2.1/16"
2.9/16"
25.3/16"
12.3/16"
6.1/8"
7"
31
11" x 10,000
7.1/16" x 10,000
2.1/16"
25.3/16"
12.3/16"
6.1/8"
7"
32
11" x 10,000
7.1/16" x 10,000
2.9/16"
26.3/8"
12.3/16"
6.1/8"
7"
33
11" x 5,000
9" x 10,000
2.1/16"
2.9/16"
3.1/16"
28.3/4"
13.3/4"
7.5/8"
8.29/32"
34
11" x 10,000
9" x 10,000
2.1/16"
2.9/16"
3.1/16"
28.3/4"
13.3/4"
7.5/8"
8.29/32
www.upetrom1mai.com
T3-TYPE TUBING
SEALING ELEMENT
T3-TYPE BONNET
In this case, the tubing hanger is completely included into the bonnet.
ID
TUBING SEALING ELEMENT SIZES

IT.
FLANGE SIZE
(in)
TUBING SIZE
(in)
7.1/16"
2.3/8"
7.1/16"
2.7/8"
7.1/16"
3.1/2"
9"
3.1/2"
T3-TYPE HANGER
HANGER SIZES
BONNET SIZES
IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP FLANGE SIZE

(in x psi)
ID
(in)
7.1/16" x 2,000
2.1/16" x 2,000
2.1/16"
7.1/16" x 2,000
2.9/16" x 2,000
2.9/16"
7.1/16" x 2,000
3.1/8" x 2,000
3.1/8"
7.1/16" x 3,000
2.1/16" x 3,000
2.1/16"
7.1/16" x 3,000
2.9/16" x 3,000
2.9/16"
7.1/16" x 3,000
3.1/8" x 3,000
3.1/8"
7.1/16" x 5,000
2.1/16" x 5,000
2.1/16"
7.1/16" x 5,000
2.9/16" x 5,000
2.9/16"
7.1/16" x 5,000
3.1/8" x 5,000
3.1/8"
10
7.1/16" x 10,000
2.1/16" x 10,000
2.1/16"
IT.
FLANGE SIZE
(in)
TUBING SIZE
(in)
11
7.1/16" x 10,000
2.9/16" x 10,000
2.9/16"
12
7.1/16" x 10,000
3.1/8" x 10,000
3.1/8"
7.1/16"
2.3/8"TBG
13
9" x 2,000
3.1/8" x 2,000
3.1/8"
7.1/16"
2.3/8"UPTBG
14
9" x 2,000
4.1/16" x 2,000
4.1/16"
7.1/16"
2.7/8"TBG
15
9" x 3,000
3.1/8" x 3,000
3.1/8"
4.1/16" x 3,000
4.1/16"
7.1/16"
2.7/8"UPTBG
16
9" x 3,000
7.1/16"
3.1/2"TBG
17
9" x 5,000
3.1/8" x 5,000
3.1/8"
7.1/16"
3.1/2"UPTBG
18
9" x 5,000
4.1/16" x 5,000
4.1/16"
9"
3.1/2"TBG
19
9" x 10,000
3.1/16" x 10,000
3.1/16"
9"
3.1/2"UPTBG
20
9" x 10,000
4.1/16" x 10,000
4.1/16
WELLHEAD EQUIPMENT
BACKPRESSURE VALVE
The backpressure valve is a single-way check valve which circulates the fluids
outside the tubing into its inside, the blowout being avoided. The backpressure valve
is mounted in the tubing hanger by means of a special thread permitting the valve
to hold high pressure values without reducing the minimum inner diameter of the
hanger significantly. If required, a test plug may be used as follows: the said plug is
installed in the backpressure valve fixture to close the tubing both ways for testing
the Christmas tree.
BACKPRESSURE VALVE SIZES

IT.

rated size;
temperature and sevice;
PSL and PR levels.
TUBING SIZE
(in)
BACKPRESSURE
VALVE SIZE
(in)
OUTER MAX.
DIAMETER
(in)
INNER MIN.
DIAMETER OF
THE THREADS
(in)
VERTICAL MIN.
DIAMETER OF THE
CHRISTMAS TREE
(in)
1.9"
1.9"
1.605"
1.525"
1.5/8"
2.063"
2.063"
1.770"
1.690"
1.13/16"
2.1/16"
2.3/8"
2.3/8"
2.020"
1.940"
2.7/8"
2.7/8"
2.485"
2.405"
2.9/16"
3.1/2"
3.1/2"
2.870"
2.790"
3.1/8" or 3.1/16"
4"
4"
3.530"
3.450"
4.1/16"
4.1/2"
4.1/2"
3.980"
3.900
4.1/16
VALVE REMOVAL PLUG SIZES

WORKING PRESSURE
(psi)
2,000 psi
3,000 psi
5,000 psi
10,000 psi
CHRISTMAS TREE CAP
THREAD SIZE
(in)
1.13/16"
1.66"TBG
2.1/16"
1.9TBG
2.9/16"
2.3/8"TBG
3.1/8", 3.1/16"
2.7/8"TBG
4.1/16"
3.1/2"TBG
CHRISTMAS TREE CAP SIZES

IT.
SIZE AND RATED PRESSURE

(in x psi)
THREAD
(in)
MIN. HOLE
(in)

size and rated pressure;
PSL and PR levels.
SIDE OUTLET
(in)
2.1/16" x 2,000
2.3/8"UPTBG
2.1/16"
2.9/16" x 2,000
2.7/8"UPTBG
2.9/16"
3.1/8" x 2,000
3.1/2"UPTBG
3.1/8"
2.9/16" x 3,000
2.7/8"UPTBG
2.9/16"
3.1/8" x 3,000
3.1/2"UPTBG
3.1/8"
2.1/16" x 5,000
2.3/8"UPTBG
2.1/16"
2.9/16" x 5,000
2.7/8"UPTBG
2.9/16"
3.1/8" x 5,000
3.1/2"UPTBG
3.1/8"
4.1/16" x 5,000
4.1/2"UPTBG
4.1/16"
10
2.1/16" x 10,000
2.3/8"UPTBG
2.1/16"
2.9/16"
11
2.9/16" x 10,000
2.7/8"UPTBG
12
3.1/16" x 10,000
3.1/2"UPTBG
3.1/16"
13
4.1/16" x 10,000
4.1/2"UPTBG
4.1/16
www.upetrom1mai.com
TEES AND CROSSES

B
D1
D1
D2
tee or cross type;

size and rated pressure;
PSL and PR levels.
D2
SIZES OF TEES AND CROSSES

WORKING
PRESSURE
(psi)
VERTICAL
HOLE
(in)
SIDE HOLE
(in)
A
(in)
B
(in)
WORKING
PRESSURE
(psi)
VERTICAL
HOLE
(in)
SIDE HOLE
(in)
A
(in)
B
(in)
2,000 psi
2.1/16"
2.1/16"
3.1/2"
3.1/2"
5,000 psi
3.1/8"
2.9/16"
5.1/2"
5.1/2"
2,000 psi
2.9/16"
2.1/16"
3.1/2"
4"
5,000 psi
3.1/8"
3.1/8"
5.1/2"
5.1/2"
2,000 psi
2.9/16"
2.9/16"
4.1/2"
4.1/2"
5,000 psi
4.1/16"
2.1/16"
4.1/2"
6.1/2"
2,000 psi
3.1/8"
2.1/16"
3.1/2"
4.1/2"
5,000 psi
4.1/16"
2.9/16"
5"
6.1/2"
2,000 psi
3.1/8"
2.9/16"
4.1/2"
4.1/2"
5,000 psi
4.1/16"
3.1/8"
5.1/2"
6.1/2"
2,000 psi
3.1/8"
3.1/8"
4.1/2"
4.1/2"
5,000 psi
4.1/16"
4.1/16"
6.1/2"
6.1/2"
4.3/8"
2,000 psi
4.1/16"
2.1/16"
4.1/2"
5.1/2"
10,000 psi
1.13/16"
1.13/16"
4.3/8"
2,000 psi
4.1/16"
2.9/16"
4.1/2"
5.1/2"
10,000 psi
2.1/16"
1.13/16"
4.3/8"
4.3/8"
2,000 psi
4.1/16"
3.1/8"
4.1/2"
5.1/2"
10,000 psi
2.1/16"
2.1/16"
4.3/8"
4.3/8
2,000 psi
4.1/16"
4.1/16"
5.1/2"
5.1/2"
10,000 psi
2.9/16"
1.13/16"
4.1/2"
5.1/8"
3,000 psi
3.1/8"
2.1/16"
4.1/2"
5"
10,000 psi
2.9/16"
2.1/16"
4.1/2"
5.1/8"
3,000 psi
3.1/8"
2.9/16"
5"
5"
10,000 psi
2.9/16"
2.9/16"
5.1/8"
5.1/8"
3,000 psi
3.1/8"
3.1/8"
5"
5"
10,000 psi
3.1/16"
1.13/16"
4.1/2"
5.7/8"
3,000 psi
4.1/16"
2.1/16"
4.1/2"
6.1/8"
10,000 psi
3.1/16"
2.1/16"
4.1/2"
5.7/8"
3,000 psi
4.1/16"
2.9/16"
5"
6.1/8"
10,000 psi
3.1/16"
2.9/16"
5.1/8"
5.7/8"
3,000 psi
4.1/16"
3.1/8"
5"
6.1/8"
10,000 psi
3.1/16"
3.1/16"
5.7/8"
5.7/8"
3,000 psi
4.1/16"
4.1/16"
6.1/8"
6.1/8"
10,000 psi
4.1/16"
1.13/16"
4.1/2"
6.7/8"
5,000 psi
2.1/16"
2.1/16"
4.1/2"
4.1/2"
10,000 psi
4.1/16"
2.1/16"
4.1/2"
6.7/8"
5,000 psi
2.9/16"
2.1/16"
4.1/2"
5"
10,000 psi
4.1/16"
2.9/16"
5.1/8"
6.7/8"
5,000 psi
2.9/16"
2.9/16"
5"
5"
10,000 psi
4.1/16"
3.1/16"
5.7/8"
6.7/8"
5,000 psi
3.1/8"
2.1/16"
4.1/2"
5.1/2"
10,000 psi
4.1/16"
4.1/16"
6.7/8"
6.7/8
WELLHEAD EQUIPMENT
ADAPTER FLANGES AND

PACKOFF FLANGES
The packoff flange is a studded flange

linking two spools.
The packoff flange may have the same
size and pressure of the top and bottom
flanges or it may be an adapter flange
passing from one value of size and
pressure to another one.
The packoff flange may include
a BREDA or PP-type secondary seal.

size and rated pressure of the bottom flange
and top flange;
PSL and PR levels.
ADAPTER FLANGE SIZES SIZES

IT.
BOTTOM
FLANGE SIZE
(in x psi)
TOP
FLANGE SIZE
(in x psi)
CASING SIZE
(in)
A
(in)
9" x 2,000
11" x 2,000
5.1/2"
21.1/4" x 2,000
16.3/4" x 2,000
7.1/8"
9" x 2,000
9" x 3,000
5.1/2"
11" x 2,000
9" x 3,000
5.5/8"
9" x 3,000
11" x 3,000
6"
11" x 3,000
11" x 3,000
5.1/2", 7", 7.5/8"
6.1/8"
13.5/8" x 3,000
13.5/8" x 3,000
8.5/8", 9.5/8"
6.13/16"
13.5/8" x 3,000
11" x 5,000
7", 7.5/8",
9.5/8", 10.3/4 "
8.1/8"
3.1/8" x 5,000
4.1/16" x 5,000
4.1/16"
10
9" x 5,000
11" x 5,000
8.3/4"
11
11" x 5,000
11" x 5,000
5.1/2", 7", 7.5/8"
9.5/16"
12
3.1/8" x 5,000
3.1/16" x 10,000
4.1/2"
10.11/16"
13
9" x 5,000
13.5/8" x 10,000
14
11" x 5,000
11" x 10,000
5.1/2", 7", 7.5/8"
10.1/4"
15
11" x 5,000
13.5/8" x 10,000
11.1/4"
16
13.5/8" x 3,000
13.5/8" x 10,000
10"
17
13.5/8" x 5,000
11" x 10,000
10"
4"
18
3.1/16" x 10,000
2.1/16" x 10,000
19
9" x 10,000
11" x 10,000
10.1/2"
20
11" x 10,000
11" x 10,000
5.1/2", 7", 7.5/8"
11.1/8
FLAGES, STUDS AND NUTS, RING GASKETS
LP THREADED
FLANGE
WELD NECK
FLANGE
STUDS AND
NUTS
THREADED
FLANGE
www.upetrom1mai.com
BLIND
FLANGE
R-TYPE
RING
BX-TYPE
RING
RX-TYPE
RING
SIZES OF FLANGES, STUDS, NUTS, RING GASKETS

THREADED FLANGE
IT.
FLANGE
SIZE
(in)
HEIGHT
(in)
THREAD TYPE
WELD
NECK
FLANGE
HEIGHT
(in)
STUDS x HEIGHT
STUD
NO.
API
METRIC
SYSTEM
(mm)
STUD
ARRANGEM.
DIAMETER
(in)
RING
GASKET
TYPE 6B - WORKING PRESSURE 2,000 psi - TESTING PRESSURE 4,000 psi

1
2.1/16"
2.3/8"TBG or UPTBG
1.75"
3.19"
5/8"-11UNC x 4.15/16"
M16x125
5"
R or Rx23
2.9/16"
2.7/8"TBG or UPTBG
1.94"
3.44"
3/4"-10UNC x 5.1/2"
M20x140
5.88"
R or RX26
3.1/8"
3.1/2"TBG or UPTBG
2.12"
3.56"
3/4"-10UNC x 5.11/16"
M20x145
6.62"
R or RX31
4.1/16"
4.1/2"TBG or UPTBG
2.44"
4.31"
7/8"-9UNC x 6.1/2"
M24x165
8.50"
R or RX37
5.1/8"
5" or 5.1/2"CSG
4"
4.81"
1"-8UNC x 7.1/4"
M27x185
10.50"
R or RX41
7.1/16"
6.5/8" or 7"CSG
4.5"
4.94"
12
1"-8UNC x 7.1/2"
M27x190
11.50"
R or RX45
9"
8.5/8" or 9.5/8"CSG
5"
5.56"
12
1.1/8"-8UN x 8.1/2"
M30x215
13.75"
R or RX49
11"
10.3/4" or 11.3/4"CSG
5.25"
6.31
16
1.1/4"-8UN x 9.1/4"
M33x235
17"
R or RX53
13.5/8"
13.3/8" CSG
3.94"
20
1.1/4"-8UN x 9.11/16"
M33x245
19.25"
R or RX57
10
16.3/4"
16" CSG
4.5"
20
1.1/2"-8UN x 11"
M39x3x280
23.75"
R or RX65
5.38
24
1.5/8"-8UN x 12.1/6
M42x3x310
28.50
R or RX73
11
21.1/4"
20" CSG

12
2.1/16"
2.3/8"TBG or UPTBG
2.56"
4.31"
7/8"-9UNC x 6.1/2"
M24x165
6.5"
R or RX24
13
2.9/16"
2.7/8"TBG or UPTBG
2.81"
4.44"
1"-8UNC x 7"
M27x180
7.5"
R or RX27
14
3.1/8"
3.1/2"TBG or UPTBG
2.44"
4.31"
7/8"-9UNC x 6.11/16"
M24x170
7.5"
R or RX31
15
4.1/16"
4.1/2"TBG or UPTBG
3.50"
4.81"
1.1/8"-8UN x 7.1/2"
M30x190
9.25"
R or RX37
16
5.1/8"
5" or 5.1/2"CSG
4"
5.31"
1.1/4"-8UN x 8.1/4"
M33x210
11"
R or RX41
17
7.1 /16"
6.5/8" or 7"CSG
4.50"
5.81"
12
1.1/8"-8UN x 8.1/2"
M30x215
12.5"
R or RX45
18
9"
8.5/8" or 9.5/8"CSG
5"
6.69"
12
1.3/8"-8UN x 9.11/16"
M36x3x245
15.5"
R or RX49
19
11"
10.3/4" or 11.3/4"CSG
5.25"
7.56
16
1.3/8"-8UN x 10.1/4"
M36x3x260
18.5"
R or RX53
4.94"
20
1.3/8-8UN x 10.7/8
M36x3x275
21
R or RX57
20
13.5/8"
13.3/8" CSG

21
2.1/16"
2.3/8"TBG or UPTBG
2.56"
4.31"
7/8"-9UNC x 6.11/16"
M24x170
6.5"
R or RX24
22
2.9/16"
2.7/8"TBG or U PTBG
2.81"
4.44"
1"-8UNC x 7"
M27x180
7.5"
R or RX27
23
3.1/8"
3.1/2"TBG or UPTBG
3.19"
4.94"
1.1/8-8UN x 7.7/8"
M30x200
8"
R or RX35
24
4.1/16"
4.1/2"TBG or UPTBG
3.88"
5.19"
1.1/4"-8UN x 8.11/16"
M33x220
9.5"
R or RX39
25
5.1/8"
5" or 5.1/2"CSG
4.44"
6.44"
1.1/2"-8UN x 10.5/8"
M39x3x270
11.5"
R or RX44
WELLHEAD EQUIPMENT
SIZES OF FLANGES, STUDS, NUTS, RING GASKETS

THREADED FLANGE
IT.
FLANGE
SIZE
(in)
26
27
STUDS x HEIGHT
WELD
NECK
FLANGE
HEIGHT
(in)
STUD
NO.
METRIC
SYSTEM
(mm)
STUD
ARRANGEM.
DIAMETER
(in)
RING
GASKET
R or RX46
THREAD TYPE
HEIGHT
(in)
7.1/16"
6.5/8" or 7"CSG
5.06"
7.13"
12
1.3/8"-8UN x 11"
M36x3x280
12.5"
9"
8.5/8" or 9.5/8"CSG
6.06"
8.81"
12
1.5/8"-8UN x 12.3/8"
M42x3x315
15.5"
R or RX50
28
11
10.3/4" CSG
6.69
10.44
12
1.7/8"-8UN x 14.5/16
M48x3x365
19
R or RX54
29
1.13/16"
3.84"
3/4"-10UNC x 5.11/16"
M20x145
5.75"
BX151
30
2.1/16"
4"
3/4"-10UNC x 5.7/8"
M20x150
6.25"
BX152
31
2.9/16"
4.52"
7/8"-9UNC x 6.11/16"
M24x170
7.25"
BX153
32
3.1/16"
5.05"
1"-8UNC x 7.1/2"
M27x190
8.5"
BX154
API
33
4.1/16"
5.9"
1.1/8"-8UN x 8.5/8"
M30x220
10.19"
BX155
34
5.1/8"
6.57"
12
1.1/8"-8UN x 9.7/16"
M30x240
11.81"
BX169
35
7.1/16"
8.06"
12
1.1/2"-8UN x 12"
M39x3x305
15.88"
BX156
36
9"
8.82"
16
1.1/2"-8UN x 13.3/4"
M39x3x350
18.75"
BX157
37
11"
9.87"
16
1.3/4"-8UN x 15.3/4"
M45x3x400
22.25"
BX158
38
13.5/8"
11.37"
20
1.7/8"-8UN x 18.1/8"
M48x3x460
26.5"
BX159
39
16.3/4
10
24
1.7/8 "-8UN x 18.1/8
M48x3x460
30.56
BX162
POSITIVE AND ADJUSTABLE CHOKE DEVICES

The choke devices adjust the fluid flow rate by means of some orifices or obturators.
The adjustable choke device is provided with an orifice whose diameter is variable and the fluid flow rate
can thus be controlled permanently.
The most important component is the rod apex which adjusts the fluid flow rate passing through the adjustable choke device with a
positive choke. The rod apex consists of an assembly of conical surfaces and it modifies the fluid passage section surface by its
displacement up and down the positive choke. The adjustable choke device is provided with a graduated bushing on which the diameter
of the fluid passage surface may be read any time.
The most important component of the positive choke device is the positive choke having a passage orifice whose size depends on the
desired flow rate.The positive choke device is delivered with a positive choke set whose diameters are those requested by the customer.
If the customer does not require the positive choke set through the contract, the device will be delivered with a positive
choke of 5 mm diameter.
The materials meet the requirements imposed by the service conditions of the chokes.
The materials afferent to the corrosive service conditions meet the requirements imposed by NACE MR0175.
The technical conditions, materials, checks, tests and marking shall be in accordance with API 6A requirements.
www.upetrom1mai.com
WELLHEAD EQUIPMENT
POSITIVE AND ADJUSTABLE CHOKE DEVICE SIZES

INLET JOINT
IT.
FLANGE
(in x psi)
OUTLET JOINT
SIZES
RING
GASKET
FLANGE
(in x psi)
RING
GASKET
A
(in)
B
(in)
2.1/16" x 3/5,000
R24
2.1/16" x 3/5,000
R24
7.48
9.45
2.1/16" x 10,000
BX152
2.1/16" x 5,000
R24
8.82
11.38
2.1/16" x 10,000
BX152
2.1/16" x 10,000
BX152
8.82
11.38
2.9/16" x 2,000
R26
2.9/16" x 2,000
R26
9.45
12.60
2.9/16" x 3/5,000
R27
2.9/16" x 3/5000
R27
9.45
12.60
2.9/16" x 10,000
BX153
2.9/16 x 5,000
R27
8.82
11.38
2.9/16" x 10,000
BX153
3.1/8" x 5,000
R35
8.82
11.38
3.1/8" x 5,000
R35
3.1/8" x 3,000
R31
8.82
11.38
4.1/16" x 3,000
R37
4.1/16" x 3,000
R37
9.88
11.38
Minimum informative data to be specified in case of demand of choke devices:

choke type;
max. choke orifice;
sizes and rated pressure;
end connection type and sizes;

PSL and PR levels.
PARALLEL EXPANDING GATE VALVE ACC. TO API SPEC. 6A

The parallel expanding gate valves acc. to API Spec. 6A requirements are used by the oil industry for neutral or sour fluids (oil, gases, water
and drilling mud) and the following pressure classes: 2,000 / 3,000 / 5,000 and 10,000 psi (140 / 210 / 350 and 700 bar).
The most important component of the valve is its closing part, namely the gate, which consists of two elements: gate and segment
attached by a spring. During the gate-to-seat sealing, the two inclined faces of the gate and segment slide one another.
Rotating the handwheel helps with transmitting up and down movements to the gate by means of the operating stem.
The seats are pressed into the body: in case of those valves being used under neutral service conditions, a teflon ring pressed into each
seat represents the seat-to-gate sealing element.
In case of sour service conditions, the seat-to-gate sealing is made by a metal-to-metal touch (for example, by hardfacing using stellite 6).
A back- or side-installed "0" ring may be used as an additional seal of the seats.
Guiding the gate is made between two bonnets mounted on the seats. The materials to be utilized are in accordance with the requirements
imposed by the service conditions of the valves.
The materials to be used for corrosive service conditions meet the NACE MR0175 requirements.
The technical conditions, materials, checks, tests and marking shall be in accordance with the API Spec. 6A requirements.
Minimum informative data to be specified in the inquiry:
valve type;

PSL and PR levels
www.upetrom1mai.com
PARALLEL GATE VALVE

ACC. TO API SPEC. 6A REQUIREMENTS
(2,000 / 3,000 / 5,000 psi)
FLANGED-END
CONNECTION VARIANT
PARALLEL GATE VALVE

ACC. TO API SPEC. 6A REQUIREMENTS
(2,000 / 3,000 / 5,000 psi)
THREADED-END
CONNECTION VARIANT
PARALLEL GATE VALVE

REQUIREMENTS
(10,000 psi)
WELLHEAD EQUIPMENT
PARALLEL GATE VALVE ACC. TO API SPEC. 6A REQUIREMENTS (2,000 / 3,000 / 5,000 psi) FLANGED-END CONNECTION VARIANT - VALVE SIZES
RATED DIAMETER
Dn (in)
RATED PRESSURE
(psi)
L
(in)
A
(in)
B
(in)
C
(in)
Mass
(kg)
2.1/16"
2,000
11.62
4.92
18.78
10.00
51
2.1/16"
3/5000
14.62
5.04
18.78
13.00
71
2.9/16"
2,000
13.12
5.83
20.00
15.94
62
2.9/16"
3/5000
16.62
5.98
20.00
15.94
101.5
3.1/8"
2,000
14.12
7.20
23.00
15.94
91
3.1/8"
3,000
17.12
7.28
23.00
15.94
115
3.1/8"
5,000
18.62
7.36
23.00
15.94
137
4.1/16"
2,000
17.12
9.05
26.50
19.69
158
4.1/16"
3,000
20.12
9.05
25.20
19.69
227
4.1/16"
5,000
21.62
9.17
25.20
19.69
237
5.1/8"
2,000
22.10
11.50
31.50
20.00
326
5.1/8"
3,000
24.10
11.50
31.50
24.00
340
5.1/8"
5,000
28.60
11.70
31.50
24.00
464
7.1/16"
2,000
26.10
13.60
31.50
20.00
410
7.1/16"
3,000
28.10
13.60
32.50
24.00
440
7.1/16"
5,000
28.00
531
32.00
13.80
PARALLEL GATE VALVE ACC. TO API SPEC. 6A REQUIREMENTS (2,000 / 3,000 / 5,000 psi) THREADED-END CONNECTION VARIANT - VALVE SIZES
RATED DIAMETER
Dn (in) / THREAD TYPE
RATED PRESSURE
(psi)
L
(in)
A
(in)
B
(in)
C
(in)
Mass
(kg)
2.1/16" LP; UPTBG-8RD
2,000
9.25
4.92
18.78
10.00
41,5
3/5,000
9.63
5.04
18.78
13.00
48
2.9/16" LP
2,000
10.25
5.83
20.00
15.94
49
2.9/16" LP
3/5,000
10.25
5.98
20.00
15.94
71
2,000
11.00
7.20
23.00
15.94
77
3/5,000
11.38
7.36
23.00
15.94
88
2,000
12.60
9.05
25.20
19.69
120
3/5,000
13.00
9.17
25.20
19.69
167
PARALLEL GATE VALVE ACC. TO API SPEC. 6A REQUIREMENTS (10,000 psi) - VALVE SIZES
RATED DIAMETER
Dn (in)
RATED PRESSURE
(psi)
L
(in)
A
(in)
B
(in)
C
(in)
Mass
(kg)
1.13/16"
10,000
18.25
14.50
21.14
18.00
155
2.1/16"
10,000
20.50
14.68
22.25
18.00
185
2.9/16"
10,000
22.25
18.11
25.75
19.69
285
3.1/16"
10,000
24.37
19.88
27.40
24.00
535
www.upetrom1mai.com
GEOTHERMAL GATE
VALVE ACC. TO
API SPEC. 6A
The geothermal gate valves acc.
to API Spec.6A requirements are
used by the oil industry for
neutral or sour fluids (oil, gases,
water and drilling mud),
pressure classes: 2,000 / 3,000
and 5,000 psi (140/210/350 bar),
temperature classes:
X (0 ... 350 F; -18 ... + 180 C)
and Y (0 ... 650 F; -18 ... 345 C)
The most important component
of the valve is its closing part,
namely the gate, which consists
of two elements: gate and
segment attached by a spring.
During the gate-to-seat sealing,
the two inclined faces of the gate
and segment slide one another.
Rotating the handwheel helps
with transmitting up and down
movements to the gate by means
of the operating stem.The seats
are pressed into the body.
The seat-to-gate sealing is made
by a metal-to-metal touch
(for example, by hardfacing
using Stellite 6).
Guiding the gate is made between
two bonnets mounted
on the seats.
The materials to be utilized
are in accordance with
the requirements imposed by the
service conditions of the valves.
The materials to be used for
corrosive service conditions meet
the NACE MR0175 requirements.
The technical conditions,
materials, checks, tests and
marking shall be in accordance
with the API Spec.6A
requirements.
Minimum informative data

to be specified in the inquiry:
valve type;
PSL and PR levels.
GEOTHERMAL GATE VALVE ACC. TO API SPEC. 6A REQUIREMENTS (2,000 / 3,000 / 5,000 psi)
FLANGED-END CONNECTION VARIANT - VALVE SIZES
RATED DIAMETER
Dn (in)
RATED PRESSURE
(psi)
L
(in)
A
(in)
B
(in)
C
(in)
Mass
(kg)
2.1/16"
2,000
11.62"
5.21"
26.18"
20"
71.5
2.1/16"
3/5,000
14.62"
5.04"
26.18"
13"
88.5
3.1/8"
2,000
14.12"
7.46"
30.79"
15.94"
123
3.1/8"
3,000
17.12"
7.65"
30.79"
15.94"
144
3.1/8"
5,000
18.62"
7.65"
30.79"
15.94"
158
4.1/16"
2,000
17.12"
9.43"
33.86"
19.68"
195.5
4.1/16"
3,000
20.12"
9.06"
34.45"
19.68"
200
4.1/16"
5,000
21.62"
9.17"
34.45"
19.68"
211
GEOTHERMAL GATE VALVE ACC. TO API SPEC. 6A REQUIREMENTS (2,000 / 3,000 / 5,000 psi)
THREADED-END CONNECTION VARIANT - VALVE SIZES
RATED DIAMETER
Dn (in)/
THREAD TYPE
RATED PRESSURE
(psi)
L
(in)
A
(in)
B
(in)
C
(in)
Mass
(kg)
2.1/16"
LP; UPTBG-8RD
2,000
9.25"
5.20"
26.18"
10"
61
2.1/16"
LP; UPTBG-8RD
3/5,000
9.63"
5.41"
26.57"
13"
72.5
3.1/8"
LP; UPTBG-8RD
2,000
11.02"
7.20"
30.79"
15.94"
87
3.1/8"
LP; UPTBG-8RD
3/5,000
11.38"
7.36"
30.79"
15.94"
110
The wellhead equipment

manufactured by
UPETROM - 1 MAI S.A.
is in accordance with
API Spec. 6A requirements.

Wellhead Equipment Acc. To Api Spec. 6a PDF

Uploaded by

Copyright:

Available Formats

Wellhead Equipment Acc. To Api Spec. 6a PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wellhead Equipment Acc. To Api Spec. 6a PDF

Uploaded by

Copyright:

Available Formats

WELLHEAD

ACC. TO API SPEC. 6A

The UPETROM - 1 MAI S.A. trading company

CASING HEAD HOUSING FOR BREDA-TYPE SLIPS AND SEAL

CASING HEAD HOUSING SIZES

CASING HEAD HOUSING ASSEMBLY

BREDA-TYPE PRIMARY SEAL SIZES

PRIMARY SEAL SIZE

SEALED CASING SIZE

BREDA-TYPE SLIP SIZES

BREDA-TYPE SLIP SIZE

20.3/4" and 21.1/4"

20.3/4" and 21.1/4"

20.3/4" and 21.1/4"

20.3/4" and 21.1/4"

20.3/4" and 21.1/4"

CASING HEAD HOUSING ASSEMBLY

CASING HEAD HOUSING FOR C22-TYPE SLIP

The casing head housing is sometimes

CASING HEAD HOUSING SIZES

Data to be put down in the inquiry:

anchored casing size and connection type;

The C22-type slip assembly includes

Sustaining and sealing the casing

C22-TYPE SLIP SIZES

CASING HEAD SPOOL FOR BREDA-TYPE SLIPS & SEAL

Data to be put down in the inquiry:

slip assembly type and size;

CASING HEAD SPOOL SIZES

TOP FLANGE SIZE

TOP FLANGE SIZE

TOP FLANGE SIZE

CASING HEAD SPOOL WITH C22-TYPE SLIP ASSEMBLY

CASING HEAD SPOOL FOR C22-TYPE SLIP

TOP FLANGE SIZE

BREDA-TYPE SECONDARY SEAL SIZES

PP-TYPE DUAL SECONDARY SEAL SIZES

PP-TYPE SECONDARY SEAL SIZES

T1-MODEL TUBING HEAD

T1-TYPE TUBING SPOOL,

TUBING SPOOL SIZES

TOP FLANGE SIZE

TOP FLANGE SIZE

Data to be put down in the inquiry:

tubing spool or crossover

T1-TYPE TUBING HANGER

This hanger is used for a pressure value

BOTTOM FLANGE SIZE

TOP FLANGE SIZE

The bonnet belongs to the tubing head

T2-MODEL TUBING HEAD

T2-TYPE TUBING SPOOL, CROSSOVER SPOOL

Data to be put down in the inquiry:

TUBING SPOOL SIZES

TOP FLANGE SIZE

TOP FLANGE SIZE

T2-TYPE TUBING HANGER

These tubing hangers may be equipped

TUBING HANGER SIZES