Lifting

FRIMEDA TRANSPORT ANCHOR SYSTEM
CONCRETE
The FRIMEDA Transport Anchor

System is a safe, easily handled
system, with the added benefit that it
can readily be established visually
whether the system is operational.
As with all lifting systems, the safe use
of our system depends on a thorough
knowledge of how to select and use
the individual system com-ponents.
This dimensioning aid and operating
manual supplies all the necessary data
and information, arranged in order of
use during the construction process. If
used properly, our system will always
guarantee that precast concrete units
can be handled in a safe and simple
manner.
Software support
To facilitate your choice of anchor and
anchor dimensions, we supply the
dimensioning program "TPA-WIN"
free of charge. Please visit our website
www.halfen-deha.com to download
our software. Once the desired anchor
type, the dimensions of the unit and
the handling conditions (lifting beam,
angled pull, etc.) have been entered,
the program determines the appropriate anchor and the additional
reinforcement. Scale drawings and
parts lists can be printed out.
Technical advice
The staff of our technical offices and
our specialists in the field will be glad
to advise you on how to deal with
problematic applications. Consult the
back page of this catalogue for the
addresses.
Some important advantages of the

FRIMEDA Transport Anchor System
- Numerous anchor types
- Manual ring clutches as well as
ring clutches with pneumatic or
manual remote-control release
- Simple, safe and quick engaging and
releasing of the ring clutches
- No mismatching
- Loads allowed in any direction
- System proved of many years
The HALFEN-DEHA Quality

Management System is certified for the locations
in Germany and
Switzerland according
to DIN EN ISO 9001
(Certificate No. QS-281 HH)

Index
Page
Description of the system
Description of the system, load groups system
System components
6-7
Anchor types
8-9
Dimensioning
10
Multiple slings
11-12
Dimensioning examples
Page
Anchors
13
Basic principles for the anchor selection tables
14-18
Spread anchor TPA-FS
19-21
Two hole anchor TPA-FZ
22-25
Erection anchor TPA-FA and Unilateral erection anchor TPA-FE
26-27
Flat foot anchor TPA-FF
28
Plate anchor TPA-FP
29
Garage anchor TPA-FG
30-31
Double ended column anchor TPA-FD
32
Sandwich panel anchor TPA-FX
33
Universal anchor TPA-FU 1,25
Page
Anchor installation
34
General Instructions
35-37
Recess formers
38-39
Holding plates
39
Holding bolts
40
Recess fillers TPA-V1 and cover plate TPA-V2 for anchor recess
Page
Ring clutches
41
Installation
42
TPA-R1
43
TPA-R2 and TPA-R3
44-45
TPA-F1
46-47
TPA-F2
48
Application
49
Checking lifting equipment
Page
Service
50
Order form
51
Addresses


FRIMEDA's Transport Anchor System
consists of a steel anchor placed in
concrete and a lifting hook (ring
clutch).
The precast concrete element is raised
and transported by means of a ring
clutch which locks into the cast-in
anchor. The design of the ring clutches
and anchors permits a pulling load
from any direction. The ring clutches
can be released either by hand
directly at the clutch head, or by
remote control.
Fig. I
System type
designation F
Anchor type
S = Spread anchor
Z = Two hole anchor
P = Plate anchor
A = Erection anchor
E = Unilateral erection anchor
G = Garage anchor
F = Flat foot anchor
D = Double ended column anchor
X = Sandwich panel anchor
U = Universal anchor
Anchor length
length = 13 cm
Note
The values for load groups and load
ranges are given in metric tons [t].
1 t is equivalent to 10 kN.
Fig. 2
The ring clutch can move in any
direction
The load groups system

The FRIMEDA Transport Anchor
System components are classified by
load groups. Each load group corresponds to the load limit of a ring
clutch to which anchors with various
rated loads are allocated. The allocation of rated loads to load groups and
ring clutches is shown in the adjacent
table. Anchors and ring clutches cannot be mismatched, that is to say that
a ring clutch cannot be assembled
with an anchor of a different load
Load group system

Load group
ring clutch
[t]
Load range
anchor
[t]
0,7
2,5
1,4
2,0
2,5
3,0
5,0
4,0
5,0
10,0
7,5
10,0
12,5
14,0
26,0
17,0
22,0
26,0
Load range [t]
Manufacturers
sign FR

System components
The anchors are manufactured from

special-grade steel strip St 52/3. The
foot of the anchor varies, and is described individually below. The hole in
the anchor head is designed to receive
the appropriate ring clutch.
The anchors
TPA-FS
TPA-FZ
TPA-FA
TPA-FX
TPA-FD
TPA-FP
The ring clutch is inserted into the

recess of the cast-in anchor and the
locking bolt is closed by hand. The
ring clutch is thus secured to the
anchor in a matter of seconds. The
ring clutch can now be subjected to
loads in any direction: turning, rotating and tilting can all be carried out
The ring clutches
TPA-R1
TPA-FE
TPA-R2
TPA-R3
TPA-F1
Each anchor bears clearly visible stamped markings with the name of the
manufacturer FRIMEDA, the description of the system (F), the anchor type
(S), the anchor length (13) and the
load range in tons (2.0) (Fig. I)
TPA-FF
TPA-FG
There is no prefered direction of pull

(Fig. 2). To disengage, the locking bolt
is simply opened to free the ring
clutch. If the access is more difficult
(see German safety code " Unfallverhtungsvorschriften" (UVV)) ring
clutches with pneumatic or manual
remote-control release can be used
(TPA-F1, TPA-F2).
TPA-F2

Anchor types
Load ranges 0,7 t to 22,0 t
Spread anchor TPA-FS
The spread anchor is very versatile. It

provides an efficient anchorage in
both thin panels and slabs. For special
applications additional reinforcement
can be combined with the spread
anchor by utilising the extra hole.
Two hole anchorr TPA-FZ
The head of the two hole anchor is

identical to the head of the spread
anchor. The anchorage in concrete is
achieved by means of a reinforcement
tail. Longer anchors with additional
holes can be produced on request.
Main applications:
Columns, Beams, Trusses, Wall units,
Double T-slabs
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 14 - 18
Main applications:
Prestressed concrete trusses, Thinwalled elements, Low strength
concrete (e.g. lightweight concrete)
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 19 - 21
er
er
Erection anchor TPA-FA / Unilateral

erection anchor TPA-FE (fig.)
Load ranges 1,4 t to 22 t

The special shaped anchor head
means that that the pitching/turning
loads are taken by the anchor and not
to the concrete. This helps to prevent
spalling of the concrete. The anchors
are notched to assist with the placement of additional reinforcement
required in the pitching/turning
operation.
Double ended column anchor TPA-FD
Load ranges 2,5 t to 22.0 t

This anchor is identical to the head of
the two hole anchor. It was specially
developed for the erecting of columns
or similar construction elements.
Special lengths can be made to order.
Main applications:
Thin-walled concrete elements, being
lifted from a horizontal to a perpendicular position.
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 22 - 25
Applications:
Columns
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 30 - 31

Anchor types
Flat foot anchor TPA-FF

This anchor is an alternative to the
plate anchor TPA-FP. The main use is
in elements with a concrete strength
at lifting in excess of 20N/mm.
Main applications:
Ceiling slabs with surface-embedded
anchors, Tubes
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 26 - 27
Plate anchor TPA-FP

This anchor mainly is used for slabs.
Additional reinforcement is essential.
Main applications:
Very thin ceiling slabs with surfaceembedded anchors
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 28
Garage anchor TPA-FG
Load range 4,0 t

This special anchor is used for heavy
precast concrete garages. It corresponds to the plate anchor TPA-FP.
Main applications:
Precast concrete garages, embedding
in floor or ceiling slab
Parameters:
Component thickness
Concrete grade
Tables p. 29
Sandwich panel anchor TPA-FX

This anchor is specially designed for
use with precast sandwich panels. Its
suspension point is close to the gravity axis thus allowing the element to
be transported and erected in an
upright position.
Universal anchor TPA-FU 1,25
Load range 1,25 t only

(Out off load range system)
This anchor combines the opportunuties of Spread-, Two hole- and
Erection anchor with a very small
recess in the precast element.
Main applications:
Sandwich panels
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 32
Main applications:
see TPA-FS, TPA-FZ and TPA-FA
Parameters:
Component thickness
Concrete grade
Reinforcement
Tables p. 33

Dimensioning
Safety rules
Deadweight
Dynamic forces
A lift system consists of a cast-in

anchor and a ring clutch which is
attached temporarily. Both parts must
be strong, durable and from the same
supplier.
The German main association of the
industrial employers liability
insurance (Hauptverband der gewerblichen Berufsgenossenschaften)
published "Safety rules for transport
anchors and transport-anchor systems
for precast concrete elements"
("Sicherheitsregeln fr Transportanker
und -systeme von Betonfertigteilen")
which represents the general standard
rules for precast in Germany.
The mass (G) of a precast reinforced

concrete unit can be determined using
When a precast unit is moved by lifting gear, dynamic forces which

depend considerably on the type of
lifting gear used are generated. These
are taken into account in dimensioning, through the lifting load coefficient f. Lifting load coefficients to
DIN15018 are summarised in the
following table.
These safety rules require the following safety against rupture:

Breaking of the steel compon.: g = 3
Breaking of concrete:
g = 2,5
Breaking of cable wires:
g=4
To guarantee a safe application of the

FRIMEDA Transport Anchor System,
this manual has to be at hand when
using the system.
Load capacity
The load capacity of the anchor
depends on:
- The strength of the concrete at
the time of lifting/transporting
- The embedded depth of the anchor
- The edge distance and spacings of
the anchors
- The load direction
- The arrangement of reinforcements
The force acting on the anchor is
determined according to the following
load assumptions:
a density of g =25 kN/m.
G = Total weight of the precast unit

Adhesion to mould
Adhesion forces between the mould
and the concrete vary according to
the type of mould used. The following
may be taken as a guide:
Oiled steel mould
q = 1 kN/m
Varnished timber mould q = 2 kN/m
Rough timber mould
q = 3 kN/m
The value (Ha) of adhesion to the
mould is thus calculated by the following equation:
Ha = q x A
Higher adhesion to the mould is to be

expected for double T-slabs and coffered units. For ease of calculation, a
multiple of the mass is used:
Double T-slabs
Coffered units
Ha = 2 x G
Ha = 4 x G
Adhesion to the mould should be

minimised before lifting out of the
mould by removing as many parts of
the mould as possible.
Lifting
class
Lifting load coefficient f

at lifting speed VH
H3
up to 90 m/min over 90 m/min

1,1 + 0,0022 VH
1,3
1,6
1,2 + 0,0044 VH
1,9
1,3 + 0,0066 VH
H4
1,4 + 0,0088
H1
H2
VH
Lifting load coefficients of f = 1,1 to

1.3 are to be expected for cranes with
precision lifting, such as those used in
manufacturing plants and on construction sites. The application of a
lifting load coefficient for lifting out of
the mould at the manufacturing plant
is unnecessary if a suitably cautious
approach is adopted.
Care must be taken when transporting
suspended precast units over uneven
terrain. In the interests of safety, a
lifting load coefficient of f > 2 should
be used.
Total load
The total load of the precast unit for
dimensioning the anchor is determined as follows:
1. During lifting:
V 1 = G + Ha
2. During transporting:
A is the area of contact between
the mould and the unit before lifting.
1
2,2
V =Gxf
2

Dimensioning
Asymmetrical anchor arrangement
Transport without spreader beam
Note:
If the arrangement of the anchors is

asymmetrical in relation to the centre
of gravity, the load of the individual
anchors must be calculated using the
rod method.
If no spreader beam is used, the cable

angle depends on the length of the
suspending cable. The resulting horizontal component increases the tensile force on the anchor by a further
factor:
To avoid tilting of the unit during

transport, the load should be suspended from the spreader beam
such that its centre of gravity S is
directly below the crane hook.
Unequal anchor loads when the suspension points are not symmetrical in
relation to the centre of gravity:
z = 1/ cos
Vtot
V tot
Spreader beam
b
Fa
If no spreader beam is used during

transport, the anchors must be embedded symmetrically to the load.
Fb
S = centre of
gravity
d =2x b
The load will always balance under

the crane hook. If the anchors are in
an asymmetrical arrangement, the
load of each anchor is calculated as
follows:
F a = V tot x
F b = V tot x
b
a+b
Cable angle b
Cable angle factor z
1,00
7,5
1,01
15,0
1,04
22,5
1,08
30,0
1,16
37,5
1,26
45,0
1,41
52,5
1,64
60,0
2,00
a
a+b
For a symmetrical arrangement, the
tensile force on the anchor is:
F = z x Vtot / n
n = number of load-bearing anchors
(see also section "Multiple slings",
page 10)

Multiple slings
For a beam with more than two suspension points and for a panel with
more than three, it is impossible to
work out the load per anchor precisely, even if the anchors are
arranged symmetrically to the load
centre. As a result of unavoidable
tolerances in the suspension system
and in the position of the anchors, it
can never be determined whether
the load on each anchor is equal.
The use of tolerance-compensating

suspension systems (e.g. articulated
lifting beam combinations, multiple
slings with compensating rig, etc.)
permits exact load distribution, but
should only be used by experienced
specialists, moreover bearing in
mind that such a system must be
used both in plant and on site. In
case of doubt, only two anchors
should be assumed to be load-
bearing (see the german safety code

UVV 18.4 VBG 9a).
The use of two anchors is recommended for trusses and upright
slabs, and four anchors installed
symmetrically to the load centre is
recommended for horizontal slabs.
In both instances, it can be assumed
that two anchors will be bearing
equal loads.
For an arrangement of four independent cable runs or continous diagonal

cable runs, only two anchors can be
assumed to be load-bearing.
A perfect static weight distribution

can be obtained by the use of a
spreader beam and two pairs of
anchors set out symmetrically.
Examples:
The use of three anchors ensures that
the static load ist shared evenly.
Vtot
Number of loadbearing anchors:
n=3
b
F
Vtot
Vtot
F d
120
F
Number of
load-bearing
anchors: n = 2
The system with compensating rig

makes it possible to distribute the
load evenly over 4 anchors.
Number of
load-bearing
anchors: n = 4
A perfect static weight distribution

can be obtained using a crossed
spreader beam, which avoids angle
pull.
Vtot
Vtot
F
F
b
F
F
F
F
Number of
load-bearing
anchors: n = 4
10
G
Number of
load-bearing
anchors: n = 4

Dimensioning example slab unit
Dimensioning situation
For dimensioning the anchor, a

distinction can be made between the
situation in the manufacturing plant
and on the construction sites.
Example slab unit Lifting, transporting in the plant and

on site
Example
Slab unit
G Mass
A Mould area
q Adhesion to mould
f Lifting load coeffic.
z Cable angle factor
w Concrete strength
Oversizing of anchors as a result of

superimposition of all detrimental
factors is avoided.
Manufacturing plant
Lifting
Transport
10 t (~ 100 kN)
On site
10 t (~ 100 kN)
20 m 2
2 kN/m
1,0
1,1
1,4
1,41 ( b = 45)
1,04 ( b= 15)
15 N/mm 2
35 N/mm
With 2 supporting anchors, the angled pull force F per anchor is as follows:
Lifting at the plant:
F = (G + q x A) x f x z/n
F = (100 kN + 2 kN/m2 x 20 m2 ) x 1,0 x 1,04/2 = 72,8 kN
Transport at the plant:
F = G x f x z/n
F = 100 kN x 1,1 x 1,04/2 = 57,2 kN
Transport on the constr. site:
F = G x f x z/n
F = 100 kN x 1,4 x 1,41/2 = 98,7 kN

An anchor in the 10 t load range is just adequate.
If all detrimental factors were superimposed, the result would be
F = (100 kN + 20 m2 x 2 kN/m 2 ) x 1,4 x 1,41/2 = 138 kN

i.g.. an anchor in the load range 14 t would have to be used.
Adhesion to mould
The loads occurring on site are often higher than in the manufacturing plant as a
result of greater cable spread and possibly higher lifting force coefficients. In this
instance, it is beneficial that the concrete's strength is usually likewise higher, and
that the anchor's load capacity in the concrete is thus higher.
In the above example, the result for a TPA-FS (see p. 16) would be as follows:
At the manufacturing plant (w = 15 N/mm, cable angle 15):
Angled pull 15 < 30
=> full permissible load at angled pull, even with
w= 15N/mm
Lifting load
On the construction site (w= 35 N/mm, cable angle 45):

Angled pulll 45 > 30
=> full permissible load at angled pull for concrete
strength of w = 35 N/mm > 23N/mm, with
angled pull reinforcement
11

Dimensioning examples
P-slab
Lifting and transporting at the manufacturing plant:
Concrete strength when lifted: b W 25 N/mm 2
Cable angle: b = 30
Cable angle factor: z = 1,16
Lifting load coefficient (Transporting): f = 1,1
Lifting load coefficient (Lifting): f = 1,0
Loads:
2
Deadweight: G = (0,1 x 3,0 + 2 x 0,3 ) x 8,7 x 25 = 104,4 kN
Adhesion to mould:
Ha = 2 x G
= 208,8 kN
Total load:
= 313,2 kN
Q = Ha + G
Load per anchor during lifting:
F = 1,16 x 1,0 x 313,2 = 90,8 kN
4
10
30
30
Load per anchor during transporting:

F = 1,16 x 1,1 x 104,4 = 33,3 kN
4
Anchor selected:
75
25
TPA-FS 10,0-30
(acc. to table p. 16)
87
15
25
75
Structural reinforcement: no additional reinforcement required
Dimensions in cm
Wall slab
Lifting at the manufacturing plant and transporting on the construction site
Concrete strength when lifting: b W 15 N/mm 2
Adhesion to mould: q = 1 kN/m 2
Lifting load coefficient of the crane: f = 1,1 (lifting at the plant)
f = 1,3 (transporting on the site)
Loads:
Dead weight: G = 0,16 x 7,0 x 2,5 x 25 = 70,0 kN
Adhesion to mould: Ha = 2,5 x 7,0 x 1 = 17,5 kN
Total load:
= 87,5 kN
Q = G + Ha
Load per anchor during lifting:
F = 1,1 x 87,5 x 0,5 = 24,1 kN
1
2
Load per anchor during transporting:
F2 = 1,3 x 70 = 45,5 kN
2
16
Anchor selected:
TPA-FA 5,0-29
(acc. to table p. 24) Fperm,lifting
25 kN > 24,1 kN
Fperm,transporting 50 kN > 45,5 kN
70
25
Additional reinforcement for pull: 16 l = 1500 mm

Erecting reinforcement
12
16 l = 1000 mm
Dimensions in cm

Basic principles for the anchor selection tables
Spread anchors for thin-walled precast units
Spread anchors for large-area precast units
e
z
,5
0
e r
e
r
e r
ez
ez
Link
Minimum thickness of precast units

t=d+k+
e
r
e
r
k
Mesh reinforcement
d = Anchor length
d
k = Cover to anchor head
= Concrete cover acc. to DIN 1045
When the load is towards

the narrow edge (face end),
a reinforcement for angled
pull must be designed and
installed in accordance with
DIN 1045.
Basic principles for the load capacitiy tables
Anchor arrangement for thin-walled units
The values for loads and edge distances shown in the

following tables have been calculated for anchors in accord.
with the current regulations and generally recognised
assumptions ("Betonkalender 92", Part 2, Page 628).
Spread, erection and two hole anchors may only be

installed in thin-walled elements with the flat steel at
right-angles to the slab.
Load direction
Symbol
Incorrect
Correct
Axial pull in direction

of anchor axis
Transverse pull perpendicular
to the anchor surface
Transverse pull parallel
to the anchor surface
Angled pull, transverse component
perpendicular to the anchor surface
Angled pull, transverse component
paralle to the anchor surface
13
SPREAD ANCHOR TPA-FS

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)
Designation
Order No.
0070.01000001
TPA-FS 0,7-11
Additional hole
a
[mm]
b
[mm]
c
[mm]
d
[mm]
30
14
110
TPA-FS 1,4-11
00002
30
14
110
TPA-FS 1,4-16
00003
30
14
160
TPA-FS 2,0-13
00004
30
14
130
TPA-FS 2,0-16
00005
30
14
160
TPA-FS 2,0-21
00006
30
14
210
TPA-FS 2,5-15
00007
30
14
10
150
TPA-FS 2,5-20
00008
30
14
10
200
TPA-FS 2,5-25
00009
30
14
10
250
a
[mm]
b
[mm]
c
[mm]
d
[mm]
Load group 5,0 t (3,0 t - 5,0 t)

Designation
Order No.
TPA-FS 3,0-16
0070.01000010
40
18
10
160
TPA-FS 3,0-20
00011
40
18
10
200
TPA-FS 3,0-28
00012
40
18
10
280
TPA-FS 4,0-18
00013
40
18
12
180
TPA-FS 4,0-24
00014
40
18
12
240
TPA-FS 4,0-32
00015
40
18
12
320
TPA-FS 5,0-18
00016
40
18
15
180
TPA-FS 5,0-24
00017
40
18
15
240
TPA-FS 5,0-40
00018
40
18
15
400
a
[mm]
b
[mm]
c
[mm]
d
[mm]
How to order:
Selected anchor
Load group 10,0 t (7,5 t - 10,0 t)
Type
Load range
Anchor length in cm
Designation
TPA-FS 4,0 - 32
Order No.:
Order No.
0070.01000022
TPA-FS 7,5-26
0070.010-00015
60
26
16
260
TPA-FS 7,5-30
00023
60
26
16
300
TPA-FS 7,5-42
00024
60
26
16
420
TPA-FS 10,0-30
00025
60
26
20
300
TPA-FS 10,0-37
00026
60
26
20
370
TPA-FS 10,0-52
00027
60
26
20
520
a
[mm]
b
[mm]
c
[mm]
d
[mm]
370
Load group 26,0 t (12,5 t - 26,0 t)
Load group
Cover to
anchor head
14
Designation
Cover to anchor head
Order No.
0070.01000028
TPA-FS 14,0-37
[t]
2,5 t
5,0 t
10,0 t
26,0 t
k
[mm]
10
10
15
15
80
35
20
TPA-FS 14,0-46
00029
80
35
20
460
TPA-FS 22,0-50
00030
80
35
26
500
TPA-FS 22,0-62
00031
80
35
26
620
Other anchor lengths are available to order

Subject to alteration

Load capacity, installation dimensions for large-area or thick-walled precast elements
Concrete strength bw 15 N/mm

Load
group
Designation
Required reinforcement: minimum standard reinforcement

Anchor
length
Permitted load
Minimum distances from edge

er
for b W
15 N/mm
5,0
10,0
26,0
[mm]
[t]
[mm]
[mm]
[mm]
[mm]
110
0,7
35
35
35
280
TPA-FS 1,4 - 11
110
1,4
70
50
40
380
TPA-FS 2,0 - 13
130
2,0
90
60
50
455
TPA-FS 2,0 - 16
160
2,0
70
50
40
665
TPA-FS 2,5 - 15
150
2,5
100
75
60
525
TPA-FS 2,5 - 20
200
2,5
75
55
45
700
TPA-FS 3,0 - 16
160
3,0
110
80
60
560
TPA-FS 3,0 - 20
200
3,0
85
60
50
700
TPA-FS 4,0 - 18
180
4,0
150
100
80
630
TPA-FS 4,0 - 24
240
4,0
100
75
60
840
TPA-FS 5,0 - 18
180
5,0
190
140
110
630
TPA-FS 5,0 - 24
240
5,0
150
100
80
840
TPA-FS 7,5 - 26
260
7,5
220
170
125
910
TPA-FS 7,5 - 30
300
7,5
190
140
110
1050
TPA-FS 10,0 - 30
300
10,0
275
200
175
1050
TPA-FS 10,0 - 37
370
10,0
220
160
125
1295
TPA-FS 14,0 - 37
370
14,0
400
280
225
1295
TPA-FS 14,0 - 46
460
14,0
300
220
175
1610
TPA-FS 22,0 - 50
500
22,0
450
340
300
1750
TPA-FS 22,0 - 62
620
22,0
400
280
225
2170
e
r
e
r
Minimum thickness of precast unit

d = Anchor length
= Concrete cover in acc.
to DIN 1045
t=d+k+
ez
e z
er
for b W
35 N/mm
TPA-FS 0,7 - 11
[t]
2,5
er
for b W
25 N/mm
Minimum spacing
between centres
ez
0,5
Anchor orientation only

as illustrated.
link dia. 8
Mesh
reinforcement
131 mm/m, crosswise
When the load is towards

the narrow edge (face end),
a reinforcement for angled
pull must be designed and
installed in acc. to DIN 1045.
e
z
e
r
er
ez
er
15

Load capacity, Installation dimensions for thin-walled precast elements
Without angled pull

reinforcement
With angled pull reimnforcement
100% Fperm
100% Fperm
F
80%
F
80%
F 30 30
F 30 30
80%
1 Angled pull at 30 < b 60 without angled pull

reinforcement only permissible when:
bW 15 N/mm + 3-fold min. thickness of unit
bW 25 N/mm + 2,5-fold min. thickness of unit
d
(Minimum thickness of unit: e = 2 er)
er er
ez /2
ez /2
2 Where concrete strength bW 23 N/mm Fperm

can be taken as 100%.
Position the angled pull reinforcem.

as closely to the recess former as possible
3 Angle of b > 60 due to cable spread are

impermissible!
Observe the reinforcement data on page I7.
Concrete strength bW 15 N/mm
Load
group
Designation
[t]
2,5
5,0
26,0
16
Anchor
length
d
[mm]
Spacing between Min. thickness of precast unit (2 er)

where bW
anchor centres
15 N/mm 25 N/mm 35 N/mm
ez
[mm]
[mm]
[mm]
[mm]
100 % Fperm
Pull
(b 30)
[t]
80 % Fperm
Angle pull
(b > 30)
[t]
TPA-FS
TPS-FS
TPA-FS
TPA-FS
0,7 - 11
1,4 - 11
1,4 - 16
2,0 - 13
110
330
70
60
50
0,7
0,6
110
330
90
70
70
1,4
1,1
160
480
80
60
60
1,4
1,1
130
390
110
90
90
2,0
1,6
TPA-FS
TPA-FS
TPA-FS
TPA-FS
TPA-FS
TPA-FS
TPA-FS
2,0 - 16
2,0 - 21
2,5 - 15
2,5 - 20
2,5 - 25
3,0 - 16
3,0 - 20
160
480
100
80
80
2,0
1,6
210
630
90
70
70
2,0
1,6
150
450
120
80
80
2,5
2,0
200
600
110
80
70
2,5
2,0
250
750
100
80
70
2,5
2,0
160
480
120
100
100
3,0
2,4
200
600
110
90
90
3,0
2,4
TPA-FS 3,0 - 28
TPA-FS 4,0 - 18
TPA-FS 4,0 - 24
TPA-FS 4,0 - 32
TPA-FS 5,0 - 18
TPA-FS 5,0 - 24
TPA-FS 5,0 - 40
TPA-FS 7,5 - 26
TPA-FS 7,5 - 30
TPA-FS 7,5 - 42
TPA-FS 10,0 - 30
280
840
100
80
80
3,0
2,4
180
540
140
120
100
4,0
3,2
240
720
130
110
100
4,0
3,2
320
960
120
100
100
4,0
3,2
180
540
180
140
140
5,0
4,0
240
720
160
120
120
5,0
4,0
400
1200
140
100
100
5,0
4,0
220
660
180
140
100
5,3
4,2
260
780
160
130
100
5,3
4,2
340
1020
140
100
100
5,3
4,2
300
900
280
200
160
10,0
8,0
370
1110
240
160
160
10,0
8,0
520
1560
200
140
120
10,0
8,0
370
1110
300
250
200
14,0
11,2
TPA-FS 10,0 - 37
TPA-FS 10,0 - 52
TPA-FS 14,0 - 37
TPA-FS 14,0 - 46
TPA-FS 22,0 - 50
TPA-FS 22,0 - 62
460
1380
240
200
160
14,0
11,2
500
1500
400
300
250
22,0
17,6
620
1860
300
250
250
22,0
17,6

Reinforcement at anchor zone for thin-walled precast elements
Reinforced zone
3-fold anchor length d
b
Edge reinforcement
sh
Me
L1
en
em
rc
nfo
rei
Length of slot-in link
Always insert angled pull link

oppos. the direction of the load.
Slot-in link, (positioned as closely to anchor as possible)
Angled pull reinforcement
LQ = overall length
(approx. 2 x length of leg)
Concrete strength b W 15 N/mm

Pull ( b 30)
Load
group
Load
range
[t]
[t]
2,5
0,7
1,4
2,0
2,5
3,0
4,0
5,0
7,5
10,0
14,0
22,0
5,0
10,0
26,0
Mesh reinf.*
both sides
crosswise
[mm/m]
Slot-in link *
Angled pull ( b > 30)
n dia. ... x L1
[mm]
Edge
Mesh reinf.*
reinforcem.* both sides
crosswise
[mm/m]
[mm]
131
constructive
constructive
131
2 dia. 6 x 400
constructive
131
2 dia. 6 x 500
131
Slot-in links *
Edge
reinforcem.*
Angle pull
reinforcement *
n dia. ... x L Q
[mm]
n dia. ... x L 1
[mm]
[mm]
131
4 dia. 6 x 300
dia. 8
dia. 6 x 450
131
4 dia. 6 x 400
dia. 8
dia. 6 x 900
constructive
131
4 dia. 6 x 500
dia. 8
dia. 8 x 950
2 dia. 8 x 600
constructive
131
4 dia. 8 x 600
dia. 10
dia. 8 x 1200
131
2 dia. 8 x 700
constructive
131
4 dia. 8 x 700
dia. 10
dia. 10 x 1150
131
2 dia. 8 x 800
constructive
131
4 dia. 8 x 800
dia. 12
dia. 10 x 1500
131
2 dia. 10 x 800
constructive
131
4 dia. 10 x 800
dia. 12
dia. 12 x 1550
188
4 dia. 10 x 800
dia. 10
188
4 dia. 10 x 800
dia. 12
dia. 14 x 2000
188
6 dia. 10 x 1000
dia. 12
188
6 dia. 10 x 1000
dia. 14
dia. 16 x 2300
257
6 dia. 10 x 1000
dia. 14
257
8 dia. 10 x 1000
dia. 14
dia. 20 x 2600
257
8 dia. 10 x 1200
dia. 14
257
8 dia. 10 x 1200
dia. 16
dia. 28 x 3450
No angled pull reinforcement is needed :

- for concrete strength of b W 15 N/mm2 + 3-fold minimum thickness of units
- for concrete strength of b W 25 N/mm2 + 2,5-fold minimum thickness of units
* Yield strength 500 N/mm

Tensile strength 550 N/mm
17

Load capacity, installation dimensions for erecting and turning
Concrete strength b W
Load
group
15 N/mm
Designation
5,0
10,0
26,0
Permitted
load
Erecting and
turning reinforcement
Minimum distances from edge

and between centres
2
for bW 15 N/mm
dia.
[mm]
Transport
[t]
[t]
Erecting
ez
[mm]
0,7 - 11
1,4 - 16
2,0 - 21
2,5 - 25
3,0 - 28
100
700
600
0,70
0,56
0,35
100
700
10
700
1,40
1,12
0,70
100
800
10
750
2,00
1,60
1,00
100
875
12
800
2,50
2,00
1,25
150
950
12
850
3,00
2,40
1,50
TPA-FS 4,0 - 32
TPA-FS 5,0 - 40
TPA-FS 7,5 - 42
TPA-FS 10,0 - 52
TPA-FS 14,0 - 46
TPA-FS 22,0 - 62
150
1050
14
950
4,00
3,20
2,00
150
1435
16
1000
5,00
4,00
2,50
250
1470
20
1200
7,50
6,00
3,75
300
1820
20
1500
10,00
8,00
5,00
525
1800
25
1800
14,00
11,20
7,00
710
2200
28
1800
22,00
17,60
11,00
TPA-FS
TPA-FS
TPA-FS
TPA-FS
TPA-FS
Lw 1
[mm]
Transport
er
[mm]
[t]
2,5
Required reinforcement: minimum standard reinforcement
[t]
Anchor orientation
must be as illustrated
er
er
The horizontal legs of the erecting

and turning reinforcement are located
directly within the outermost position
of the reinforced area.
0,5 e
z
0,5 e
z spa
c
ing t
Lw
o th
e ne
xt an
chor
h = depends on the
component thickness
90
Reinforcement steel: Yield strength 500 N/mm,
tensile strength 550 N/mm
1
Lw = Length before bending
Bending radius acc. to DIN 1045
18
dia.
TWO HOLE ANCHOR TPA-FZ

Anchor dimensions
Load group 2,5 t (1,4 t - 2,5 t)
Designation
Order No.
a
[mm]
b
[mm]
c
[mm]
d
[mm]
TPA-FZ 1,4-9
0070.02000002
30
14
90
TPA-FZ 2,0-9
00003
30
14
90
TPA-FZ 2,5-9
00004
30
14
10
90
a
[mm]
b
[mm]
c
[mm]
d
[mm]
120
Load group 5,0 t (3,0 t - 5,0 t)

Designation
Order No.
0070.02000005
TPA-FZ 3,0-12
40
18
10
TPA-FZ 4,0-12
00006
40
18
12
120
TPA-FZ 5,0-12
00007
40
18
15
120
a
[mm]
b
[mm]
c
[mm]
d
[mm]
60
26
16
160
60
29
20
165
a
[mm]
b
[mm]
c
[mm]
d
[mm]
240
Load group 10,0 t (7,5 t - 10,0 t)

Order No.
TPA-FZ 7,5-16
0070.02000009
TPA-FZ 10-17
00010
Load group 26,0 t (12,5 t - 26,0 t)
How to order:
Designation
Selected anchor
Order No.
0070.02000011
TPA-FZ 14,0-24
Type
Load range
Anchor length in cm
TPA-FZ 7,5 - 16
80
35
20
TPA-FZ 22,0-30
00013
80
35
26
300
TPA-FZ 26,0-30
00012
120
65
30
300

Order No.: 0070.020-00009
Load group
Cover to
anchor head
Designation
[t]
2,5 t
5,0 t
10,0 t
26,0 t
k
[mm]
10
10
15
15
19

Load capacity, installation dimensions
Without angled pull

reinforcement
b
100% Fperm
With angled pull reinforcement

b
100% Fperm
80%
Fperm
F
80%
Fperm
F 30 30
F 30 30
80% 2
F Fperm
1 Angled pull at 30 < b 60 without angled pull

reinforcement only permissible when:
bW 25 N/mm + 2,5-fold min. thickness of unit
d
(Minimum thickness of unit: e = 2 er)
er er
ez /2
ez /2
2 Where concrete strength bW 23 N/mm, Fperm

can be taken as 100%.
Position the angled pull reinforcem.

as closely to the recess former as possible
3 Angle of b > 60 due to cable spread are impermissible!
Observe the reinforcement data on page 2I.
Concrete strength b W
Load
group
Designation
[t]
2,5
5,0
10,0
26,0
20
15 N/mm
Anchor
length
d
[mm]
Spacing between
anchor centres
ez
[mm]
Minimum thickness
of precast unit
(2 x e r )
[mm]
100% Fperm
Pull
( b 30)
[t]
80% Fperm
Angled pull
( b > 30)
[t]
TPA-FZ 1,4 - 9
TPA-FZ 2,0 - 9
TPA-FZ 2,5 - 9
90
500
80
1,4
1,1
90
600
90
2,0
1,6
90
600
100
2,5
2,0
TPA-FZ 3,0 - 12
TPA-FZ 4,0 - 12
TPA-FZ 5,0 - 12
TPA-FZ 7,5 - 16
TPA-FZ 10,0 - 17
TPA-FZ 14,0 - 24
120
650
100
3,0
2,4
120
700
110
4,0
3,2
120
750
120
5,0
4,0
160
1200
130
7,5
6,0
165
1200
140
10,0
8,0
240
1500
160
14,0
11,2
TPA-FZ 22,0 - 30
TPA-FZ 26,0 - 30
300
1500
180
22,0
17,6
300
1500
200
26,0
20,8

Reinforcement in anchor zone
Reinforced zone for meshes

3-fold anchor length
Edge reinforcement
~ LZ/2
re
L1
sh
Me
~ 0,7 x LZ/2
en
em
orc
inf
Length of slot-in link
Additional reinforcement tail for pull
30
LZ
Slot-in link, positioned as closely to anchor as possible

Additional reinforcement tail for pull
Angled pull reinforcement

as close as possible to recess former
(see also page I7 for position)
L Q = overall length
(approx. 2 x length of leg)
Concrete strength b W 15 N/mm 2

Angled pull ( b > 30)
Pull ( b 30)
Load Mesh reinf.*
range both sides
crosswise
[mm/m]
[t]
1,4
2,0
2,5
3,0
4,0
5,0
7,5
10,0
14,0
22,0
26,0
Slot-in links *
n dia. ... x L1
[mm]
Edge
reinf.*
[mm]
Edge
Add. reinf.
Mesh reinf.* Slot-in links *
for pull *
both sides
reinforcem.*
n dia. ... x L1
n dia. ... x LZ
crosswise
[mm]
[mm]
[mm/m]
[mm]
131
131
2 dia. 6 x 400 constructive 1 dia. 10 x 650
131
131
131

131
131
131
2 dia. 10 x 800
dia. 10
1 dia. 20 x 1750
4 dia. 10 x 800
dia. 12
1 dia. 25 x 1850
131
131
131
4 dia. 10 x 1000
dia. 14
1 dia. 28 x 2350
4 dia. 12 x 1200
dia. 14
1 dia. 28 x 3000
6 dia. 12 x 1200
dia. 14
2 dia. 28 x 3050

Add. reinf.
for pull *
n dia. ... x LZ
[mm]
Angled pull
reinforcem.*
dia. ... x LQ
[mm]
131
131
4 dia. 6 x 400
dia. 8
1 dia. 10 x 650
dia. 6 x 900
4 dia. 6 x 500
dia. 8
1 dia. 12 x 800
dia. 8 x 950
131
131
131
4 dia. 8 x 600
dia. 10
1 dia. 12 x 1000
dia. 8 x 1200
4 dia. 8 x 700
dia. 10
1 dia. 14 x 1000
dia. 10 x 1150
4 dia. 8 x 800
dia. 12
1 dia. 16 x 1200
dia. 10 x 1500
131
131
131
4 dia. 10 x 800
dia. 12
1 dia. 16 x 1500
dia. 12 x 1550
4 dia. 10 x 800
dia. 12
1 dia. 20 x 1750
dia. 14 x 2000
6 dia. 10 x 1000
dia. 14
1 dia. 25 x 1850
dia. 16 x 2300
131
131
131
8 dia. 10 x 1000
dia. 14
1 dia. 28 x 2350
dia. 20 x 2600
8 dia. 10 x 1200
dia. 16
1 dia. 28 x 3000
dia. 25 x 3000
8 dia. 12 x 1200
dia. 16
2 dia. 28 x 3050
dia. 28 x 3450
* Yield strength: 500 N/mm, tensile strength: 550 N/mm

1
No angled pull reinforcement is needed:

- for concrete strength of b W 25 N/mm2 + 2,5-fold minimum thickness of units
For other concrete strengths, the length L Z of the

additional reinforcement tail for pull may be reduced
in relation to the permissible bond stress
(bW = 25 N/mm2 : x 0,8; bW = 35 N/mm2 : x 0,65).
Please consult us if the concrete strength is lower or if
lightweight concrete is used
21
ERECTION ANCHOR TPA-FA

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)

Designation
Order No.
0070.030TPA-FA 1,4-20
00001
TPA-FA 2,5-23
00002
a
[mm]
c
[mm]
d
[mm]
g
[mm]
55
200
45
55
10
230
45
a
[mm]
c
[mm]
d
[mm]
g
[mm]
70
12
270
70
70
15
290
70
a
[mm]
c
[mm]
d
[mm]
g
[mm]
95
15
320
90
95
20
390
90
a
[mm]
c
[mm]
d
[mm]
g
[mm]
90
Load group 5,0 t (3,0 t - 5,0 t)

Designation
Order No.
0070.03000003
TPA-FA 4,0-27
TPA-FA 5,0-29
00004
Load group 10,0 t (7,5 t - 10,0 t)

Designation
Order No.
0070.03000005
TPA-FA 7,5-32
00006
TPA-FA 10,0-39
How to order:
Selected anchor
Load group 26,0 t (12,5 t - 26,0 t)
Type
Load range
Anchor length in cm
Designation
Order No.
0070.03000007
TPA-FA 12,5-50
TPA-FA 4,0 - 27
148
20
500
TPA-FA 17,0-50
00008
148
25
500
90
TPA-FA 22,0-50
00009
148
30
500
90
Order No.: 0070.030-00003

Load group
Cover to
anchor head
22
k1
[t]
2,5 t
5,0 t
10,0 t
26,0 t
k
[mm]
10
10
15
15
k1
[mm]
UNILATERAL ERECTION ANCHOR TPA-FE

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)

Designation
Order No.
0070.040TPA-FE 1,4-20
00001
TPA-FE 2,5-23
a
[mm]
c
[mm]
d
[mm]
g
[mm]
40
200
42,5
40
10
230
42,5
a
[mm]
c
[mm]
d
[mm]
g
[mm]
55
12
270
50,5
55
15
290
50,5
a
[mm]
c
[mm]
d
[mm]
g
[mm]
80
15
320
78
80
20
390
78
a
[mm]
c
[mm]
d
[mm]
g
[mm]
88,5
00002
Load group 5,0 t (3,0 t - 5,0 t)

Designation
Order No.
0070.04000003
TPA-FE 4,0-27
TPA-FE 5,0-29
00004
Load group 10,0 t (7,5 t - 10,0 t)

Designation
Order No.
0070.04000005
TPA-FE 7,5-32
00006
TPA-FE 10,0-39
How to order:
Load group 26,0 t (12,5 t - 26,0 t)
Selected anchor
Designation
Type
Load range
Anchor length in cm
Order No.
0070.04000007
TPA-FE 12,5-50
TPA-FE 5,0 - 29
115
20
500
TPA-FE 17,0-50
00008
115
25
500
88,5
TPA-FE 22,0-50
00009
115
30
500
88,5
Order No.: 0070.040-00004

k
Load group
Cover to
anchor head
k1
[t]
2,5 t
5,0 t
10,0 t
26,0 t
k
[mm]
10
10
15
15
k1
[mm]
23
ERECTION ANCHOR TPA-FA AND UNILATERAL ERECTION ANCHOR TPA-FE

Load capacity, installation dimensions
Transport
b
Erection
100% Fperm
100% Fperm
F
80%
Fperm
15
50%
Fperm
F 30 30
ez /2
Where concrete strength bw 23

Fperm can be taken as 100%.
Angle of b > 60 due to cable spread are

not allowed!
Insert the erection reinforcement in the

anchor notches
50%
F Fperm
F
*)
15
*)
N/mm2
d
*) only Type TPA-FA

allows erection on
both sides
er er
Observe the reinforcement data on page I5.
Concrete strength bw 15 N/mm2

Load
group
[t]
[t]
2,5
1,4
2,5
4,0
5,0
7,5
10,0
5,0
10,0
26,0
24
Load
range
12,5
17,0
22,0
Anchor
length
Spacing between
anchor centres
d
[mm]
ez
[mm]
200
230
Minimum thickness
of precast element
(2 x e r )
Transport
Pull
( b 30)
100% Fperm
[t]
Transport
Angled pull
( b > 30)
80% Fperm
[t]
Erection
TPA-FE
[mm]
TPA-FA
[mm]
700
90
100
1,4
1,1
800
120
120
2,5
2,0
1,3
270
950
140
150
4,0
3,2
2,0
2,5
50% Fperm
[t]
0,7
290
1000
140
160
1200
160
175
5,0
7,5
4,0
320
6,0
3,8
390
1500
200
200
10,0
8,0
5,0
500
1500
240
240
14,0
11,2
7,0
500
1500
300
300
17,0
13,6
8,5
500
1500
360
360
22,0
17,6
11,0
ERECTION ANCHOR TPA-FA AND UNILATERAL ERECTION ANCHOR TPA-FE

Anchor orientation must be as illustrated

er
er
e z spacing to the next anchor
0,5 e z
Lw
dia.
h = depends on the
thickness of the unit
90
The horizontal legs of the erecting

and turning reinforcement are located
directly within the outermost position
of the reinforced area.

Load group
[t]
2,5
5,0
10,0
26,0
Load range
[t]
Lw = Length before bending

Reinforcement steel *
2
Erecting reinforcement *
dia. ... x LW
[mm]
1,4
2,5
4,0
5,0
7,5
10,0
dia. 10 x 700
12,5
17,0
22,0
dia. 25 x 1500
dia. 12 x 800
dia. 14 x 950
dia. 16 x 1000
dia. 20 x 1200
dia. 20 x 1500
Erecting reinforcement on both sides also acts as angled pull

reinforcement. No additional angled pull reinforcement is
required.
Without additional reinforcement for pull:
Meshes, slot-in links and edge reinforcement as for TPA-FS.
With additional reinforcement for pull:
Meshes, slot-in links and edge reinforcement as for TPA-FZ.
dia. 25 x 1800
dia. 28 x 1800
For other concrete strength, the length LW of the erecting reinforcement may be reduced in relation to the permissible composite
2
2
stresses (b W = 25 N/mm : x 0,8; b W= 35 N/mm : x 0,65).
25
FLAT FOOT ANCHOR TPA-FF

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)
Load groups 2,5 t - 5,0 t
a
c
FF 7
Designation
Order No.
TPA-FF 0,7-6
0070.07000001
TPA-FF 1,4-6
00002
TPA-FF 2,0-7
TPA-FF 2,5-7
a
[mm]
c
[mm]
e
[mm]
30
30
65
70
65
00003
70
30
70
00004
80
30
10
75
94
a
[mm]
c
[mm]
d
[mm]
e
[mm]
2,5 FR
d
[mm]
Load group 5,0 t (3,0 t - 5,0 t)
Designation
Order No.
TPA-FF 3,0-9
0070.07000005
40
10
90
100
TPA-FF 4,0-11
00006
40
12
110
100
TPA-FF 5,0-12
00007
40
15
125
105
c
[mm]
d
[mm]
e
[mm]
Load groups 10,0 t - 26,0 t
Load group 10,0 t (7,5 t - 10,0 t)

Designation
0070.070-
a
[mm]
7,5-17
00009
60
16
170
120
TPA-FF 10,0-20
00010
60
20
200
120
TPA-FF
a
c
Order No.
FF 22
12,5 FR
Load group 26,0 t (12,5 t - 26,0 t)

Designation
0070.070-
a
[mm]
c
[mm]
d
[mm]
e
[mm]
TPA-FF 12,5-22
00011
80
16
220
200
TPA-FF 17,0-27
00012
80
20
270
200
TPA-FF 22,0-31
00013
80
26
310
200
Order No.
How to order
Selected anchor:
Type
Load range
Anchor length in cm
TPA-FF 4,0 - 11
Order No.: 0070.070-00006
[t]
Load group
Cover to
k
Anchor head [mm]
26
2,5 t
5,0 t
10,0 t
26,0 t
10
10
15
15

FLAT FOOT ANCHOR TPA-FF

Minimum thickness of precast element
d = Anchor length
= Concrete cover in acc. DIN 1045
t=d+k+
12,5 FR
FF 22
z
L
dia.
Where loads are acting towards the edge of the element,

insert angled pull reinforcement as for spread or two hole
anchors.
Position the additional

reinforcement bars as close to anchor as possible.
Required reinforcement: additional reinforcement acc. to table

Load Load
group range
[t]
[t]
2,5
0,7
1,4
2,0
2,5
5,0
10,0
26,0
3,0
4,0
5,0
7,5
10,0
12,5
17,0
26,0
Designation
Anchor Minimum Minimum distance

Additional
length thickness between centres reinforcement *
of element
and from edge
t
[mm]
er
[mm]
ez
[mm]
65
80
140
280
65
80
140
280
70
90
150
300
d
[mm]
TPA-FF
TPA-FF
TPA-FF
TPA-FF
TPA-FF
TPA-FF
TPA-FF
0,7 - 6
1,4 - 6
2,0 - 7
2,5 - 7
3,0 - 9
4,0 - 11
5,0 - 12
TPA-FF 7,5 - 17
TPA-FF 10,0 - 20
TPA-FF 12,5 - 22
TPA-FF 17,0 - 27
TPA-FF 22,0 - 31
Perm. loads
Axial angled and transversal pull
at concrete strength bw when lifted:
L
[mm]
15 N/mm 2
[t]
200
0,7
0,7
250
1,4
1,4
1,4
300
1,8
2,0
2,0
dia.
[mm]
25 N/mm
[t]
30 N/mm
[t]
0,7
75
100
160
320
300
2,0
2,5
2,5
90
120
190
380
10
400
2,8
3,0
3,0
110
140
230
460
12
450
3,7
4,0
4,0
125
160
260
520
12
500
4,4
5,0
5,0
170
215
340
680
14
600
5,46
7,0
200
245
400
800
14
600
7,55
10,0
10,0
220
265
440
880
16
750
8,85
12,5
12,5
270
315
540
1080
16
900
12,03
17,0
17,0
310
355
620
1240
20
1100
14,80
22,0
22,0
7,5
27
PLATE ANCHOR TPA-FP

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)

Designation
Order No.
TPA-FP 1,4-5
0070.05000001
TPA-FP 2,5-8
00002
a
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
30
55
80
30
10
80
80
a
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
40
15
120
100
10
a
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
60
20
160
140
12
Load group 5,0 t (3,0 t - 5,0 t)

Designation
Order No.
0070.05000003
TPA-FP 5,0-12
k
Load group 10,0 t (7,5 t - 10,0 t)

Load group
[t]
Cover to
k
Anchor head [mm]
2,5 t
5,0 t
10,0 t
10
10
15
Designation
Order No.
TPA-FP 10-16
0070.05000004
Other load ranges and dimensions on request

Load capacity, installation dimensions, additional reinforcement for thin slabs and pipes
Load Load
group range
Designation
[t]
[t]
2,5
1,4
2,5
TPA-FP 1,4 - 5
TPA-FP 2,5 - 8
5,0
10,0
TPA-FP 5,0 - 12
TPA-FP 10,0 - 16
5,0
10,0
Required reinforcement: add. reinforcement as per table

Anchor
length
Minimum spaces between Additional reinforcement *

centres and from edge
d
[mm]
er
[mm]
ez
[mm]
[mm]
L
[mm]
Permissible load for
at strength when lifted

b W 15 N/mm 2 b W 25 N/mm 2
[t]
[t]
55
115
230
200
1,12
1,4
80
165
330
10
300
2,0
2,5
120
240
480
12
450
4,0
5,0
160
330
660
16
600
8,0
10,0
Minimum thickness of element
t=d+k+
d = Anchor length
28
e
e
z
dia.
GARAGE ANCHOR TPA-FG

Anchor dimensions
This anchor is designed for special applications, such as thin

floors of prefabricated garages. The plate anchor with
erection anchor head permits high angled pull for handling
units in areas with a very restricted access height. In the
case of axial and angled pull at < 45 (spread of cable
<90), the permissible loads as per the table must be
reduced by 50 %. The concrete strength must be at least
W 25 N/mm2.
k1

Load group [t]
Cover to
k
anchor head
[mm]
k1
5,0
Load group 5,0 t

Designation
Order No.
10
TPA-FG 4,0-7
0070.06000001
a
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
60
16
67
150
Load capacity, installation dimensions, additional reinforcement for prefabricated garages

Load
group
Load
range
[t]
[t]
5,0
4,0
Designation
TPA-FG 4,0 - 7
Required reinforcement: add. reinforcement as per table

Anchor
length
Minimum spacing between

centres and from edge
Additional reinforcement *
d
[mm]
er
[mm]
ez
[mm]
dia.
[mm]
67
240
480
12
Permissible load
L
[mm]
(for b > 45)

[t]
450
4,0
b = cable angle,
when b < 45 see hints above
Minimum thickness of element

Anchor orientation only
as illustrated
t=d+k+
d = Anchor length
t
dia.
e
r
e
z
e
r
29
DOUBLE ENDED COLUMN ANCHOR TPA-FD

Anchor dimensions
Load group 2,5 t (0,7 t - 2,5 t)

Designation
Order No. Column width

a
[mm]
[mm]
0070.080TPA-FD 2,5-23 00001

TPA-FD 2,5-28 00002
TPA-FD 2,5-33
00003
[mm]
[mm]
250
30
10
228
300
30
10
278
350
30
10
328
a
[mm]
c
[mm]
d
[mm]
Load group 5,0 t (3,0 t - 5,0 t)

Designation

[mm]
0070.080TPA-FD 5,0-23
250
00004
40
15
226
TPA-FD 5,0-28
00005
300
40
15
276
TPA-FD 5,0-33
00006
350
40
15
326
TPA-FD 5,0-38
00007
400
40
15
376
TPA-FD 5,0-43
00008
450
40
15
426
TPA-FD 5,0-48
00009
500
40
15
476
Load group 10,0 t (7,5 t - 10,0 t)

Designation

[mm]
0070.08000010
300
TPA-FD 7,5-26
00011
350
TPA-FD 7,5-31
00012
400
TPA-FD 7,5-36
How to order:
Selected anchor:
[mm]
[mm]
[mm]
60
16
262
60
16
312
60
16
362
TPA-FD 7,5-41
00013
450
60
16
412
TPA-FD 7,5-46
00014
500
60
16
462
TPA-FD 10,0-26
00015
300
60
20
262
TPA-FD 10,0-31
00016
350
60
20
312
TPA-FD 5,0 - 38
TPA-FD 10,0-36
00017
400
60
20
362
Order No.: 0070.080-00007
TPA-FD 10,0-41
00018
450
60
20
412
TPA-FD 10,0-46
00019
500
60
20
462
a
[mm]
c
[mm]
d
[mm]
400
80
16
362
450
80
16
412
Type
Load range
Anchor length in cm
Load group 26,0 t (12,5 t - 22,0 t)

Designation

[mm]
0070.08000020
TPA-FD 12,5-36
00021
TPA-FD 12,5-41
Load group
[t]
2,5 t
5,0 t
10,0 t
26,0 t
Cover to
anchor head
k
[mm]
10
10
15
15
30
TPA-FD 12,5-46
00022
500
80
16
462
TPA-FD 17,0-36
00023
400
80
20
362
TPA-FD 17,0-41
00024
450
80
20
412
TPA-FD 17,0-46
00025
500
80
20
462
TPA-FD 22,0-41
00026
450
80
26
412
TPA-FD 22,0-46
00027
500
80
26
462
TPA-FD 22,0-56
00028
600
80
26
562
Other anchor lengths on request

DOUBLE ENDED COLUMN ANCHOR TPA-FD

Load capacity, reinforcement
Concrete strength: b W 15 N/mm

Reinforcement: Additional reinforcement as per table
Reinforcement
Load
group
The anchor is capped with the appropriate recess former at

both ends. The assembly of anchor and recess formers is
then pushed between the reinforcement bars and fastened
to the mould at both ends. The additional reinforcement
bars are then pushed through the holes of the anchor and
wired into place.
The diameter of the reinforcement tails is the same as for
the two hole anchor.
Designation
5,0
10,0
2 x dia z ...L
26,0
Permissible
column weight
for b W
2
25 N/mm
[t]
[mm]
[mm]
for b W
15 N/mm 2
[t]
TPA - FD 2,5 - 23
12
750
4,0
5,0
TPA - FD
TPA - FD
TPA - FD
TPA - FD
TPA - FD
TPA - FD
TPA - FD
12
750
4,0
5,0
12
750
4,0
5,0
16
1000
8,0
10,0
16
1000
8,0
10,0
16
1000
8,0
10,0
16
1000
8,0
10,0
16
1000
8,0
10,0
TPA - FD 5,0 - 48
TPA - FD 7,5 - 27
TPA - FD 7,5 - 32
TPA - FD 7,5 - 36
TPA - FD 7,5 - 41
TPA - FD 7,5 - 46
TPA - FD 10,0 - 26
16
1000
8,0
10,0
20
1200
12,0
15,0
20
1200
12,0
15,0
20
1200
12,0
15,0
20
1200
12,0
15,0
20
1200
12,0
15,0
25
1500
16,0
20,0
TPA - FD 10,0 - 31
TPA - FD 10,0 - 36
TPA - FD 10,0 - 41
TPA - FD 10,0 - 46
TPA - FD 12,5 - 36
TPA - FD 12,5 - 41
TPA - FD 12,5 - 46
25
1500
16,0
20,0
25
1500
16,0
20,0
25
1500
16,0
20,0
25
1500
16,0
20,0
25
1500
20,0
25,0
25
1500
20,0
25,0
25
1500
20,0
25,0
TPA - FD 17,0 - 36
TPA - FD 17,0 - 41
TPA - FD 17,0 - 46
TPA - FD 22,0 - 41
TPA - FD 22,0 - 46
TPA - FD 22,0 - 56
28
1600
27,2
34,0
28
1600
27,2
34,0
28
1600
27,2
34,0
28
2000
35,2
44,0
28
2000
35,2
44,0
28
2000
35,2
44,0
[t]
2,5
Reinforcement
2,5 - 28
2,5 - 33
5,0 - 23
5,0 - 28
5,0 - 33
5,0 - 38
5,0 - 43
dia.z
Base of column
Erecting
Column
width-
Observe load on edges

Top of
column
Installed position TPA-FD

Lifting
er
Note:
the larger the dimension er, the greater the load on the
anchor when erecting, but the lower the load on the edge
at the base of the column.
31
SANDWICH PANEL ANCHOR TPA-FX

Load capacity, Anchor dimensions, Edge distances, Reinforcement
2 x er
FH** FV
Additional reinforcement 1 **
(not supplied by HALFEN)
h1
dia.1**
90
dia.1
Reinforcing steel *
L w =Length before bending
h 1 Acc. to thickness of element,
but at least as per table below
** Only required if FH exists,
e.g. when positive production
Additional reinforcement 2
(not supplied by HALFEN)
dia. 2
How to order:
Selected anchor:
Type
Load range
Anchor length in cm
Version
TPA-FX 5,0 - 30 - fv
Order No.:
0070.090-00007
Reinforcing steel *
The specially designed sloping head of

the sandwich panel anchor type
TPA-FX can be inserted close to the
gravity axis in large precast concrete
sandwich-panels. The panel hangs
nearly upright during transportation
and installation. The head shape is
compatible with the FRIMEDA range
of TPA accessories.
30
l2
dia.2
Bending radius
acc. to DIN 1045
Concrete strength b W 15 N/mm2

Load group Permissible load [t]
FV
FH
[t]
2,5
2,5
0,8
5,0
5,0
1,8
10,0
7,5
2,6
10,0
10,0
3,5
26,0
17,0
5,0
Load group
Designation
5,0
10,0
10,0
26,0
TPA-FX 5,0-30
TPA-FX 7,5-35
TPA-FX 10,0-35
TPA-FX 17,0-40
[mm]
[mm]
[mm]
[mm]
n dia. ...x L1
[mm]
250
10
10
100
2 dia. 8 x
600
60
300
16
18
120
2 dia. 8 x
800
00003
00008
80
350
16
26
130
2 dia. 10 x 800
00004
00009
80
350
20
26
140
4 dia. 10 x 800
00005
00010
100
400
20
35
180
4 dia. 12 x 1200
Additional reinforcement 1 * 1
Lw
h1
[mm]
[mm]
[mm]
TPA-FX 2,5-25
TPA-FX 5,0-30
TPA-FX 7,5-35
10
600
14
700
16
800
TPA-FX 10,0-35
TPA-FX 17,0-40
20
20
Additional reinforcement 2 *
Cut length
dia.2
l2
[mm]
Recommended
recess former
[mm]
60
14
800
TPA-A1 2,5
80
16
1200
TPA-A1 5,0
100
120
25
1400
TPA-A1 10,0
900
25
1800
TPA-A1 10,0
1100
140
28
2500
TPA-A1 26,0
For adequate sufficient corrosion protection, we recommend the hot-galvanised version.
32
2 x e r Slot-in links for pull*
00007

1
b2
00002
dia. 1
[t]
2,5
Finish:
a
black
hot-dip-galv. (fv)
Order No.
Order No.
[mm]
0070.0900070.09000006
00001
40
TPA-FX 2,5-25
Designation
All dimensions in mm
UNIVERSAL ANCHOR TPA-FU 1,25 - 12

Load capacity, anchor and installation dimensions, reinforcement
Erection and transport anchors have to be adapted to meet
the specific requirements of handling very thin precast
concrete units (e.g. balcony parapet panels). The FRIMEDA
universal anchor TPA-FU 1.25-12 has been designed for this
specific application, and is ideal for lifting, turning and
transporting units in the above situation.
Load Designation
group
[t]
1,25
1
Extra-small recess former TPA-A7,

specially for TPA-FU (see page 37)
TPA-FU 1,25 - 12
Order
No.
Minimum Permissible load at

spaces btw. concrete strength
centres and
b W 15 N/mm2
from the
edge
1
Erect.
and
turn.
0070.
100-
er
ez
[mm] [mm]
00001
30
[t]
[t]
[t]
240 1,25
1,0
0,65
1,25 t at er = 60 mm and ez = 480 mm
Recommended reinforcement
An additional reinforcement tail as in
the drawing on the left is essential for
distributing the loads in very thin
panels or on ones with only a singlelayer reinforcement.
For turning and erecting, a turning
reinforcement as shown below must
be incorporated.
dia. 8, cut length 700 mm
Matching ring clutch

TPA-R2 for TPA-FU
(see page 43)
0,5
ez
e
z
spac
ing t
o the
next
anch
or
Reinforcement steel *, dia. 8, cut length 600 mm

h = depending on thickness of element
33
ANCHOR INSTALLATION
General Instructions
The anchors must be installed carefully in the interests of

efficient functioning and optimum safety.
The recess former A1 can easily be removed from the set

concrete unit if it is greased before concreting.
Use the available installation aids for all applications.
We recommend that the recess former should not be

nailed to the formwork if at all avoidable!
Floating installation
Mounting on the formwork (wood/steel)
Application for columns, beams, trusses, TT-slabs

Installation aid:
Holding plate H2
Open up recess former A1 2

insert anchor 1 , press
holding plate H2 3 into
recess former and press into
the wet concrete.
Mounting on the formwork (wood)
Installation aid:
Holding plate H1
Nail or screw the holding
plate H1 4 onto the formwork. Press on the recess
former A1 2 with inserted
anchor 1 .
4
34
Installation aid:
Holding bold S1 or S2
Drill through the formwork,

push through the holding bolt
S1 or S2 5 , screw into the
recess former A1 2 with
inserted anchor 1 , draw up
against formwork and tighten
with wing nut.
Mounting on the formwork (steel)
Installation aid:
Magnetic holding plate HM
Magnetic holding plate 6

grips the formwork. Press the
recess former A1 2 with
inserted anchor 1 onto pins.
2
RECESS FORMERS
Types TPA-A1, TPA-A2, TPA-A3
Recess former TPA-A1

Material:
Application:
Installation:
Special
attributes:
Plastic
for Spread-, Two hole-, Plate-, Flat foot-,
Columns-, Erection-, Sandwich panelanchor
Holding plate H1, H2, H4, HM;
Holding bold S1 or S2
High durability and good resistance
against formwork release oil.
Load group
2,5 t
Designation
Order No.
TPA-A1 2,5
0072.010-
a [mm]
b [mm]
c [mm]
d [mm]
Colour
5,0 t
10,0 t
26,0 t
TPA-A1 5,0 TPA-A1 10,0 TPA-A1 26,0
00001
00002
00003
00004
43
49
67
112
104
126
188
234
45
59
85
118
M8
M8
M 12
M 16
Orange
Black
Green
Blue

Material:
Application:
Installation:
Load group
Designation
Rubber
for all anchors except erection and garage
anchors
by holding bold or holding plate H3
2,5 t
5,0 t
10,0 t
TPA-A2 2,5 TPA-A2 5,0 TPA-A2 10,0
Order No.
0072.020-
a [mm]
b [mm]
c [mm]
00001
00002
41
51
00003
70
102
126
184
47
59
84

Locking
bracket
Material:
Application:
Installation:
Load group
Designation
Rubber
for garage anchors
by locking bracket
5,0 t
TPA-A3 5,0
Order No.
0072.030-
00001
a [mm]
b [mm]
115
c [mm]
50
54
35
RECESS FORMERS
Types TPA-A4, TPA-A5 and accessories
Recess formers TPA-A4 and TPA-A5

Recess former for permanent fixing to the mould. The head
of the anchor is jacketed in the foam strip TPA-Z01 and
secured in the recess former from outside by means of
wedge TPA-E01. To demould, simply remove the wedge.
TPA-A E01
Plastic recess former TPA-A4 (incl. TPA-A E01)
Load group
Designation
Order No.
2,5 t
5,0 t
TPA-A4 2,5
TPA-A4 5,0
00001
00002
0072.040-
a [mm]
b [mm]
c [mm]
d [mm]
Colour
10,0 t
26,0 t
TPA-A4 10,0 TPA-A4 26,0

00003
00004
112
37
48
70
102
126
184
252
45
59
84
118
M8
M8
M 12
M 16
Orange
Black
Green
Blue
Steel recess former TPA-A5 (incl. TPA-A E01)
TPA-A Z01
(foam)
Load group
Designation
Order No.
2,5 t
5,0 t
TPA-A5 2,5
TPA-A5 5,0
00001
0072.050-
10,0 t
26,0 t
TPA-A5 10,0 TPA-A5 26,0
00002
00003
00004
a [mm]
b [mm]
c [mm]
37
48
70
112
102
126
184
252
45
59
85
118
d [mm]
M8
M8
M 12
M 16
Foam strip TPA-A Z01

for recess formers TPA-A4, TPA-A5
Order No.
Load group
Designation
2,5 t
TPA-A Z01 2,5

TPA-A Z01 5,0
TPA-A Z01 10,0
TPA-A Z01 26,0
00006
Load group
Designation
Order No.
2,5 t
00002
10,0 t
TPA-A E01 2,5

TPA-A E01 5,0
TPA-A E01 10,0
26,0 t
TPA-A E01 26,0
00005
0072.1205,0 t
10,0 t
26,0 t
00007
00008
00009
Spare wedge TPA-A E01

for recess formers TPA-A4, TPA-A5
0072.1205,0 t
36
00003
00004
RECESS FORMERS
Types TPA-A7, TPA-A8 and TPA-A9

Material:
Application:
Installation:
Note:
Load group
Designation
Plastic
Universal anchor TPA-FU
by holding plate H1
only for load group 1,25 t
1,25 t
TPA-A7 1,25
Order No.
0072.070-
a [mm]
b [mm]
c [mm]
00001
25
60
32

Material:
Application:
Installation:
Note:
Load group
Designation
Order No.
0072.080-
Plastic
for anchors of load group 2,5 t
The TPA-A8 former consists of two
sections which are pushed together over
the anchor head and then secured to the
mould by means of a wedge that is
pushed through the two fixing tabs
Not reusable!
2,5 t
TPA-A8 2,5
00001

Material:
Application:
Installation:
Note:
Load group
Designation
Plastic
especially suitable for TPA-FS, TPA-FZ,
TPA- FF and TPA-FD, not suitable for
TPA-FA, TPA-FE and TPA-FX
as TPA-A1
for recesses without protruding concrete
lugs.
2,5 t
TPA-A9 2,5
5,0 t
10,0 t
26,0 t
TPA-A9 5,0 TPA-A9 10,0 TPA-A9 26,0
Order No.
0072.090-
a
b
c
d
00001
00002
00003
[mm]
43
49
67
00004
112
[mm]
104
126
188
234
[mm]
45
59
85
118
[mm]
M8
M8
M 12
M 16
Orange
Black
Green
Blue
Colour
37
ANCHOR INSTALlATION
Holding plates for recess formers
Holding plate TPA-H1

for recess former TPA-A1
The holding plate TPA-H1 consists of a base with two studs
and four holes for nails. The plate can be nailed or welded
on to the formwork. For assembly, the recess former is fitted
on to the studs. The mould can then be easily removed
without taking the plate off.
(Version 1,25 t)
Load
Designation Order No.
group [t]
0073.0101,25
TPA-H1 1,25 00001
2,5
TPA-H1 2,5 00002
TPA-H1 5,0 00003
5,0
10,0
26,0
TPA-H1 10,0
TPA-H1 26,0
[mm]
[mm]
[mm]
[mm]
40
15
70
15
10
10
85
30
00004
125
45
12
00005
175
65
16

for floating installation of recess former TPA-A1
Load
group [t]
0073.020TPA-H2 2,5 00001
2,5
TPA-H2 5,0 00002
5,0
10,0
26,0
TPA-H2 10,0
TPA-H2 26,0
[mm]
[mm]
[mm]
[mm]
70
15
10
85
30
10
00003
125
45
12
00004
175
65
16

Load
group [t]
0073.0302,5
TPA-H3 2,5 00001
5,0
TPA-H3 5,0 00002
10,0
TPA-H3 10,0 00003
[mm]
[mm]
[mm]
[mm]
100
50
120
60
170
80
12

for recessed installation of recess former TPA-A1
Load
group [t]
0073.0402,5
TPA-H4 2,5 00001
5,0
TPA-H4 5,0 00002
10,0
TPA-H4 10,0 00003
[mm]
[mm]
[mm]
[mm]
144
63
16
10
144
63
16
10
200
80
16
12
38
ANCHOR INSTALLATION
Holding plates and holding bolts for recess formers
Magnetic holding plate TPA-HM

Load
group [t]
0073.05000001
TPA-HM 2,5
2,5
00002
TPA-HM 5,0
5,0
[mm]
[mm]
[mm]
[mm]
144
63
16
10
144
63
16
10
Threaded holding bolt TPA-S1

for recess former TPA-A1, TPA-A4, TPA-A5 and Holding plate TPA-H2
The threaded holding bolt TPA-S1 bolt is used for fastening

the recess former. It has a locked wing nut at its upper end.
An identical wing nut is mounted on the thread.
dia.
Order No.
dia.
0073.060-
[mm]
[mm]
TPA-S1- M8
00001
160
M8
TPA-S1- M8
TPA-S1-M12
TPA-S1-M16
00002
160
M8
00003
160
M 12
00004
180
M 16
Load group
[t]
Designation
2,5
5,0
10,0
26,0
Bayonet holding bolt TPA-S2

The bayonet holding bolt TPA-S2 consists of a threaded bolt
with a pressed bayonet end. It is inserted in the bayonet
fitting of the recess former and turned 90 to lock. The
upper (locked) wing nut must then be at right angles to the
longitudinal direction of the recess former. The recess
former is secured to the mould by tightening the second
wing nut.
a
dia.
Load group
[t]
Designation
2,5
TPA-S2- M8
TPA-S2- M8
TPA-S2-M12
TPA-S2-M12
5,0
10,0
26,0
Order No.
dia.
0073.070-
[mm]
[mm]
[mm]
00001
160
11
M8
00001
160
11
M8
00002
180
16
M 12
00002
180
16
M 12
39
ACCESSORIES
Recess filler TPA-V1 / Cover plate TPA-V2 for anchor recess
Recess filler TPA-V1
(Polystyrene)
If precast concrete units are stored

outdoors for any length of time, we
recommend the use of our recess
fillers.
Fitting the recess filler

The recess filler is very easy to install.
It is simply fitted over the anchor and
pressed into the recess.
The polystyrene recess filler is used to

seal off or fill the anchor recess in the
precast concrete. It protects the
anchor against corrosion and prevents
water from collecting in the recess
(this could otherwise result in icing-up
in cold weather).
The recess filler can be used either as
a seal for transport and storage, or as
a permanent seal once assembly and
erection are completed. The recess
filler is supplied in the corresponding
four load groups and suitable for all
recess formers of the load group.
Recess filler TPA-V1
Load group
Designation
[t]
Cover plate TPA-V2
Order No.
0073.080-
2,5 t
TPA-V1 2,5
00001
5,0 t
TPA-V1 5,0
00002
10,0 t
TPA-V1 10,0
00003
26,0 t
TPA-V1 26,0
00004
The reusable plastic cover plate helps

prevent dirt, ice etc. collecting in the
anchor recess. It is easily fitted on the
anchor head and safely kept in the
anchor by means of two clips. It also
can be removed easily.
Cover plate TPA-V2
Load group
[t]
Designation
2,5 t - 5,0 t
TPA-V2 2,5 - 5,0
00001
150
70
TPA-V2 10,0
00002
260
130
10,0 t
Order No.
a [mm]
b [mm]
0073.090-
40

Application
Removing the mould sections
Fitting the ring clutch
Assembly
Before lifting the precast concrete

unit, as many sections of the mould as
possible should be removed in order
to minimise adhesion to the mould.
Inadequate demoulding is the most
common cause of flaking of the
precast concrete unit or of anchor
failure. The forces acting on the lifting
system may be several times the
actual weight of the precast unit.
To transport an element, the appropriate ring clutch for the load group is
inserted over the anchor head in the
concrete recess. The load ranges are
mismatch-proof.
A major advantage of the FRIMEDA

Rapid Lift System is that the slinging
devices (ring clutches) remain
attached to the crane hook, and do
not need to be transported by hand.
The ring clutch can be released
manually by pushing back the locking
bolt once the device is off-load.
Only matching components

will fit together!
Removing the recess formers
A
A
3, 0
Z
-5
,0
-5
,0 t
0
3,
Locking the ring clutch
Erecting slabs without tilting table
The ring clutch is positively locked by

a simple hand-operated movement of
the locking bolt. The resulting
connection is safe, and the ring clutch
is free to move in any direction. The
precast element can now be lifted out
of the mould and transported safely to
its point of storage.
The FRIMEDA Rapid Lift System can be

used to move flat-manufactured precast
units from a horizontal to a vertical
position. The direction of pull is at rightangles to the built-in anchor. To avoid
flaking of the concrete, the erection
anchor TPA-FA should be properly
embedded in the unit. The use of crossbeams when lifting is recommended, in
order to avoid torsional forces.
90
A
Z
-5
,0 t
To demould the recess former, two

rods are inserted in the holes in the
recess former, which is then levered
out by scissors action. This technique
will guarantee a long life time for the
recess former. Attempting to remove
the recess former using the tip of a
carpenter's hammer will destroy it.
0
3,
41
RING CLUTCHES
Ring clutch TPA-R1 with shackle for manual release
The ring clutch consists of a shackle

and a clutch head. The shackle is free
to move in any direction. The clutch
head incorporates a locking bolt
which fastens to the anchor in the
concrete cavity.
Load group [t]

Designation
Order No.
0071.010-
Corresponding
load ranges [t]
a [mm]
b [mm]
c [mm]
Four ring clutches are available, each

one suitable for three or four anchor
load ranges. (See test report for
confirmation of safety.)
d [mm]
e [mm]
26,0 t
2,5 t
5,0 t
10,0 t
TPA-R1 2,5 TPA-R1 5,0 TPA-R1 10,0 TPA-R1 26,0
00001
00002
00003
00004
0,7 - 2,5
3,0 - 5,0
5,3 - 10,0
12,5 - 26,0
265
330
425
605
27
36
50
72
80
100
140
209
70
86
112
160
50
71
90
120
Production date
The marking of the clutch heads is the
same for all types. It subsists of:
-Quality mark "FRIMEDA"
-Factory code,e.g. "81"
-Load capacity,e.g. "3,0-5,0 t" (Load
group)
Additionally, on the reverse side the
position of the locking bolt is signed
"A - Z" ("open - close").
The quality mark (F), the type designation (e.g. R1) and production date
(month/year) are imprinted on the
shackle (Type R1, F1 and F2) alternatively, on the aluminium clips of the
cable wires (Type R2 und R3). Example: "F - R1 - 10/93".
The ring clutches are clearly matched
to the anchors by compatible design
as well as by marking the anchor types
and load groups. Only matching
components will fit together.
Type
FRIMEDA Quality mark
Shackle
FRIMEDA
Quality mark
Clutch head
Locking bolt
Factory code
Load group (e.g. 3,0 - 5,0 t)
Lifting devices have to be checked

regularly according to instructions
on page 49.
Note
The values for load groups and load
ranges are given in metric tons [t].
1 t is equivalent to 10 kN.
42
We explicitly warn against to

combine our products with components of other producers. Function
and safety can only be guaranteed
when using the original FRIMEDA
clutches.
RING CLUTCHES
Ring clutch TPA-R2 / TPA-R3 with wire cables for manual release
Checking:
Ring clutch with wire cable TPA-R2

for load group 1,25/2,5/5,0/10,0 t
Ring clutches with wire cables are

subject to the same controls, i.e.
annual safety inspection by experts, as
all other lifting and handling systems.
Any damaged wire must be withdrawn from use in strict accordance
with the relevant accident prevention
regulations for lifting equipment.
on page 49.
As the clutch head generally has a
much longer life than the pressed
cable loops, HALFEN can fit clutch
heads onto new cables if necessary.
Ring clutch with wire cable TPA-R3

for load group 26,0 t
Do not combine our products with

accessories from other manufacturers. HALFEN will only guarantee
the efficient operation and safety of
its ring clutches if used in conjunction with original cable loops.
Note:
The clutch head and the locking bolt
are the same as for type TPA-R1.
Load group [t]

Designation
0071.020Order No.
Corres. load ranges [t]
a [mm]
b [mm]
c [mm]
d [mm]
1,25 t
TPA - R2 1,25
2,5 t
TPA - R2 2,5
00001
00002
1,25
0,7 - 2,5
60
50
5,0 t
TPA - R2 5,0
26,0 t
TPA - R3 26,0
00004
00005
3,0 - 5,0
5,3 - 10,0
12,5 - 26,0
120
200
240
1570
90
100
140
160
210
195
295
325
480
dia. 8
dia. 14
dia. 18
dia. 22
dia. 32
Other cable loop dimensions on request
00003
10,0 t
TPA - R2 10,0
43
RING CLUTCHES
Ring clutch TPA-F1 with pneumatic remote-control release
Operating principle
Operating sequence
The pneumatically operated remotecontrol release mechanism has been

designed as an alternative to the
manual release for distances of more
than 10 metres.
On the pneumatic version, the locking
bolt is pulled back by compressed air.
A one-way cylinder is installed on the
clutch for this purpose. The compressed air (max. 7 bar) can be
supplied by any suitable source, e.g.
the site compressor or a portable unit.
The hand valve in the feed line to the
ring clutch can be opened by a key
(Totmanns safety handle system). Any
number of branches can be fitted
downstream of it, depending on the
number of ring clutches used.
The ring clutch is inserted in the

concrete recess and closed by actuating the locking bolt. The precast unit
can now be lifted. To disengage the
clutch, for example after installation
of concrete columns, compressed air
is fed via the hand valve to the
cylinder so that the locking bolt is
moved back to open the clutch. There
is no risk of unintentional release, as
the locking bolt remains closed in the
event of failure of the compressed air
supply. The system uses an air cylinder
which will not release the bolt if it is
holding a load greater than 0.2 t. The
hand valve admits the compressed air
supply only if the key is turned in the
direction of the arrow and held in the
open position.
As soon as the key is released, even if

still in the keyhole, the valve is closed
automatically. It is recommended that
the lines to the cylinders be installed
in the crane or crane jib, to ensure
satisfactory operation. If the
compressed air is fed to the precast
unit directly from ground level, the
hoses between the compressor and
remote control may only be
connected up when it is time to
release the clutch; e.g. when the
column is in position.
Ring clutches with remote-control

release have the same markings as
manual ring clutches.

on page 49.
Ring clutch TPA-F1

with pneumatic
remote-control
release
Load group [t]

26,0 t
2,5 t
5,0 t
10,0 t
Designation
TPA-F1 2,5 TPA-F1 5,0 TPA-F1 10,0 TPA-F1 26,0
Order No.
0071.030-
00001
00002
00003
00004
44
RING CLUTCHES
Accessories for TPA-F1
11
12
Single lift
11
12
11
11
11
12
Double lift
11
12
12
11
11
6
1
10
12
No.
Four-point lift
Designation
12
Order No.
0071.070-
Single lift
Accessories needed for:

Double lift
Four-point lift
see page 44
Ring clutch complete
Hand valve
Key
Compressor
Quick-action hose coupling R 1/4"
As No. 5, but for hose on both sides
Thread plug R 1/4"
Coupling R 3/8"
00004
00005
00011
00002
00010
00003
00014
Coupling R 1/4"
4-way distributor
Hose clip
Fabric hose
00015
00001
00012
10
20
00013
As requested
As requested
As requested
3
4
5
6
7
8
9
10
11
12
45
RING CLUTCHES
TPA-F2 mit manual remote control by Bowden cable
Operating princple
The remote-control release disengages
the ring clutch from a safe distance of
up to 10 metres. The release mechanism consists basically of a Bowden
cable connected to the locking bolt of
the ring clutch. At the opposite end,
the release handle is locked in a tube
by means of a safety hook. All TPA-F2
clutch heads in the various load
groups have the same M27 thread,
i.e. the remote-control mechanism fits
any clutch head. The opening and
closing mechanism, comprising the
locking bolt, the shackle with indicator and the slide, are parts of the
complete clutch head.

on page 49.
Operation of the manual remotecontrol

To disengage the ring clutch, the
handle is disengaged by pressing and
turning. Unintentional release is not
possible. For safety and efficiency
reasons, the locking bolt is closed by
hand. The remote device is designed
such that the locking bolt cannot be
closed at a distance.
Load group [t]
The flexible tube can withstand reasonable tension and compression loads,
so that the precast unit can easily be
handled. The ring clutches of all the
load groups can be used with any of
the manual remote-control releases of
lengths 2.5 m, 5.0 m, 7.5 m and
10.0m.
2,5 t
5,0 t
10,0 t
26,0 t
Designation
Cable length
TPA-F2 2,5
2,5 m
00001
00005
00009
00013
5,0 m
00002
00006
00010
00014
7,5 m
00003
00007
00011
00015
10,0 m
00004
00008
00012
00016
TPA-F2 5,0 TPA-F2 10,0 TPA-F2 26,0

Order No. 0071.040-
Ring clutch TPA-F2

with manual remote control
46
RING CLUTCHES
Component parts for TPA-F2
All clutch heads in the various load

groups have an M27 inner connecting
thread, making it possible to connect
the remote-control mechanism to
cables of different lengths and various
clutch heads. For this reason, and also
to reduce storage space requirements,
the remote-control mechanism
components can also be ordered
separately.
In common with all lifting devices,

remote-control mechanisms must be
checked regularly by an expert (see
Page 49). Worn locking bolts can be
replaced by HALFEN at the works, but
no other type of repair is permitted.
Clutch unit TPA-F2-KUP

Load group
Designation
[t]
2,5
5,0
10,0
26,0
3
TPA-F2-KUP- 2,5
TPA-F2-KUP- 5,0
TPA-F2-KUP-10,0
TPA-F2-KUP-26,0
Pull cable unit TPA-F2-SZE
Order No.
Length
0071.08000001
[m]
00002
5,0
00003
7,5
00004
10,0
2,5
Designation
TPA-F2-SZE- 2,5
TPA-F2-SZE- 5,0
TPS-F2-SZE- 7,5
TPS-F2-SZE-10,0
Order No.
0071.08000005
00006
00007
00008
Release handle and tube TPA-F2-GRI

Load group
Designation
[t]
all
Load groups
Order No.
0071.080-
TPA-F2-GRI
00009
47
RING CLUTCH
Application / Misuse
1. Engaging
2. Lifting
3. Releasing
Insert the ring clutch in the recess in

the concrete and close the locking
bolt or the slide manually, pushing it
to the limit position. Then start the
lifting operation.
The ring clutch can be subjected to

loads in any direction (do not exceed
the load limits of the anchors!).
Angled pull of up to 60 due to the
use of a spreader is permissible.
Manual ring clutch: push back the

bolt by hand. The ring clutch is now
free.
Open
locking bolt
Close
locking bolt
Lift out
Insert
Misuse of the FRIMEDA ring clutch

If the shackle is beneath the clutch
head when subjected to the load, it
may lock in the position illustrated.
The round shackle will then become
bent when the load is raised.
If the shackle is pulled towards the

top surface of the slab when subjected to the load, it may become bent
on the edge of the slab
In the upper position, the shackle may

lock within the clutch housing. A narrow lifting cable angle will cause the
shackle to become bent. The problem
can be overcome by turning the shackle through approx. 45 (lower drawing).
Shackle bends at this

point, damaging the
anchor or slab
rce
Dircetion of fo
No
Permissible
Shackle locks in
this position
Yes
Shackle cannot lock
in this position
48
RING CLUTCHES
Checking lifting devices / spare parts
In common with all lifting devices, the operating safety of ring clutches must be checked at least once a year by an expert for
an operational safety. There is no fixed time period for the withdrawal from use of a FRIMEDA Ring clutch. Any deformation
of a locking bolt means that an overload of at least three times the permitted load has occurred. Worn locking bolts can be
exchanged; no other repairs are permitted. We explicitly warn against the mixing of different companys products. The integrity of the wire ring clutch can only be guaranteed when using the original wire cables or approved replacements installed by
HALFEN. To check FRIMEDA Ring clutches the following criterions have to be observed:
Locking bolt
Clutch head
Wire cables (TPA-R2/R3)
Ring clutches with worn or bent

locking bolts must be taken out of
use. Tolerances on dimensions acc. to
table below.
If the clutch head is deformed or the

mouth opening is enlarged, the ring
clutch has to be withdrawn and can
not be repaired. Tolerances on dimensions as shown in the table below.
Wire cables should be checked for the

following defects:
- Kinking and buckling
- One braid broken
- Slackening of the outermost exposed
layer on free length
- Crushing on free lengths
- Crushing at the eyes contact point
with more than 4 ruptured wires on
braided cables, or more than 10
ruptured wires on cablelaid rope
- Corrosion marks
- Damage or severe wear to the cable
connector or cable-end connector
- High number or ruptured wires
The cable must be taken out of use if
the following numbers of ruptured
wires are found:
Load group
[t]
1,25
2,5
5,0
10,0
26,0
Nominal
dimension d
Minimum
dimension d
[mm]
[mm]
8 +0,4/-0,6
13 +0,7/-0,4
16,5 +0,7/-0,4
23,5 +0,8/-0,4
32 +0,9/-0,5
7
12
Load group
[t]
15,5
1,25
22,5
2,5
31
Nominal
dimension e
Maximum
dimension e
[mm]
[mm]
7 0,12
12 0,5
18 + 0,5/-1,0
22 0,5
34 + 2,0/-1,0
5,0
10,0
26,0
8
13,5
19,5
23,5
37
Replacement locking bolt for ring

clutches TPA-R1, TPA-R2 and TPA-R3
Load group
[t]
1,25
2,5
5,0
10,0
26,0
Designation
00002
00003
00004
00005
Replacement locking bolt for ring

clutches TPA-F1 and TPA-F2
Load group
Designation
[t]
10,0
TPA-F-ERE- 2,5
TPA-F-ERE- 5,0
TPA-F-ERE-10,0
26,0
TPA-F-ERE-26,0
2,5
5,0
No. of visible ruptured wires

over a length of
3d
6d
30d
4
6
16
Braided cable
Order No.
0071.06000001
TPA-R-E1- 1,25
TPA-R-E1- 2,5
TPA-R-E1- 5,0
TPA-R-E1-10,0
TPA-R-E1-26,0
Cable type
Order No.
0071
.06000006
Shackle (TPA-R1)
d = cable diameter
Clutches with visible signs of damage

or excessive wear must be withdrawn
immediately. Tolerances on dimensions acc. to table below.
Load group
Nominal
dimension f
Minimum
dimension f
[t]
[mm]
[mm]
2,5
14
20
26
40
5,0
10,0
26,0
13
19
25
38,5
00007
00008
00009
Checking of the wire cables has to

include for signs of slipping between
the cable and the swaged clamp.
Acids, alkaline fluids and other aggressive media, that can cause corrosion,
must be kept away from the wire
cables. Crane hooks must have a large
radius. Sharp-edged hooks or hooks
with small cross-section, and therefore
small radii, can lead to unacceptable
damage of the of the wire cables. As
the clutch head usually has a longer
service life than the wire loop, clutch
heads with worn wire cables can be
exchanged by HALFEN.
49
Order form for FRIMEDA Ring clutches, anchors and accessories

To be copied for use
Date of order:
Customer:
Halfen GmbH & Co. KG

International Distribution
Liebigstr. 14 D-40764 Langenfeld
Phone: +49 (0) 2173-970-831
Fax:
+49 (0) 2173-970-849
e-Mail: [email protected]
Re: Drawing No.:
Address for delivery:
Account No.:
Desired date of delivery:
Item Quantity
Designation
Order No.
b = bright (standard version)

fv = hot-galvanised
gv = electroplated
(standard for TPA-FU, for all other types on request)
A 4 = Stainless steel A 4 = W 1.4571/ 1.4401 (on request)
50
Version
Remarks
Item price [/Unit]
CONTACT
HALFEN-DEHA Worldwide
HALFEN-DEHA is represented in more than 35 countries worldwide.

Please contact our International Distribution department, if you wish to
receive information about the HALFEN-DEHA foreign representatives:
Halfen GmbH & Co. KG
International Distribution
Liebigstr. 14
D-40764 Langenfeld
GERMANY
Phone:
Fax:
+49 (0) 2173-970-831

+49 (0) 2173-970-849
[email protected]
e-Mail:
Internet: www.halfen-deha.com
INTERNET
www.halfen-deha.com
Products Contacts worldwide Catalogues News Download

Practice About HALFEN-DEHA
NOTES REGARDING THIS CATALOGUE:

Technical and design changes reserved
The information in this publication is based on state-of-the-art technology at the time of publication. We reserve the right to
make technical and design changes at any time. HALFEN-DEHA shall not accept liability for the accuracy of the information in
this publication or for any printing errors.
The HALFEN-DEHA Quality Management System is certified for the locations in Gemany, Switzerland
and Poznan (Poland) according to DIN EN ISO 9001/2000, Certificate No. QS-281 HH.
2004 HALFEN-DEHA Vertriebsgesellschaft mbH,

applies also to copying in extracts
2.000 04/04
TE - 002 - 04/04
HALFEN-DEHA Vertriebsgesellschaft mbH Liebigstrae 14 40764 Langenfeld GERMANY

Telephone: + 49 (0) 2173-970-0 Telefax: + 49 (0) 2173-970-849 www.halfen-deha.com

Lifting

Uploaded by

Copyright:

Available Formats

Lifting

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lifting

Uploaded by

Copyright:

Available Formats

FRIMEDA TRANSPORT ANCHOR SYSTEM

FRIMEDA TRANSPORT ANCHOR SYSTEM

The FRIMEDA Transport Anchor

Some important advantages of the

The HALFEN-DEHA Quality

FRIMEDA TRANSPORT ANCHOR SYSTEM

Description of the system

Description of the system, load groups system

Basic principles for the anchor selection tables

Spread anchor TPA-FS

Two hole anchor TPA-FZ

Erection anchor TPA-FA and Unilateral erection anchor TPA-FE

Flat foot anchor TPA-FF

Plate anchor TPA-FP

Garage anchor TPA-FG

Double ended column anchor TPA-FD

Sandwich panel anchor TPA-FX

Universal anchor TPA-FU 1,25

TPA-R2 and TPA-R3

Checking lifting equipment

FRIMEDA TRANSPORT ANCHOR SYSTEM

Description of the system

The load groups system

Load group system

Load range [t]

FRIMEDA TRANSPORT ANCHOR SYSTEM

The anchors are manufactured from

The ring clutch is inserted into the

The ring clutches

There is no prefered direction of pull

FRIMEDA TRANSPORT ANCHOR SYSTEM

Load ranges 0,7 t to 22,0 t

Spread anchor TPA-FS

The spread anchor is very versatile. It

Load ranges 1,4 t to 26,0 t

Two hole anchorr TPA-FZ

The head of the two hole anchor is

Erection anchor TPA-FA / Unilateral

Load ranges 1,4 t to 22 t

Double ended column anchor TPA-FD

Load ranges 2,5 t to 22.0 t

FRIMEDA TRANSPORT ANCHOR SYSTEM

Flat foot anchor TPA-FF

Load ranges 0,7 t to 22,0 t

Plate anchor TPA-FP

Load ranges 1,4 t to 10,0 t

Garage anchor TPA-FG

Load range 4,0 t

Sandwich panel anchor TPA-FX

Load ranges 2,5 t to 17,0 t

Universal anchor TPA-FU 1,25

Load range 1,25 t only

FRIMEDA TRANSPORT ANCHOR SYSTEM

A lift system consists of a cast-in

The mass (G) of a precast reinforced

When a precast unit is moved by lifting gear, dynamic forces which

These safety rules require the following safety against rupture:

Breaking of cable wires:

To guarantee a safe application of the

a density of g =25 kN/m.