Scribd Logo
Upload

Welcome to Scribd!

  • 138 views

    Hilti Hvu With Has Rod Pds - 2011 - r2

    Uploaded by

    gabi_xyz
    This document provides product information for HVU adhesive anchors with HAS-E rods. It summarizes the benefits of the anchors, which include suitability for different concrete strengths and conditions, high loading capacity, and corrosion resistance. It also provides technical data on recommended loads, approvals/certifications, curing times, setting details, and setting instructions for using the anchors in dry or water-saturated concrete with hammer drilling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hilti Hvu With Has Rod Pds - 2011 - r2

    Uploaded by

    gabi_xyz
    138 views3 pages
    This document provides product information for HVU adhesive anchors with HAS-E rods. It summarizes the benefits of the anchors, which include suitability for different concrete strengths and conditions, high loading capacity, and corrosion resistance. It also provides technical data on recommended loads, approvals/certifications, curing times, setting details, and setting instructions for using the anchors in dry or water-saturated concrete with hammer drilling.

    Original Description:

    hilt 122

    Original Title

    Hilti Hvu With Has Rod Pds_2011_r2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides product information for HVU adhesive anchors with HAS-E rods. It summarizes the benefits of the anchors, which include suitability for different concrete strengths and conditions, high loading capacity, and corrosion resistance. It also provides technical data on recommended loads, approvals/certifications, curing times, setting details, and setting instructions for using the anchors in dry or water-saturated concrete with hammer drilling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    138 views3 pages

    Hilti Hvu With Has Rod Pds - 2011 - r2

    Uploaded by

    gabi_xyz
    This document provides product information for HVU adhesive anchors with HAS-E rods. It summarizes the benefits of the anchors, which include suitability for different concrete strengths and conditions, high loading capacity, and corrosion resistance. It also provides technical data on recommended loads, approvals/certifications, curing times, setting details, and setting instructions for using the anchors in dry or water-saturated concrete with hammer drilling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Product Data Sheet

    HVU with HAS-E rod


    adhesive anchor

    HVU with HAS / HAS-E rod adhesive anchor


    Mortar System

    Benefits

    s uitable for non-cracked concrete


    C20/25 to C50/60

    high loading capacity

    s uitable for dry and water


    saturated concrete

    large diameter applications

    high corrosion resistant

    s mall edge distance and anchor


    spacing possible

    Hilti HVU foil capsule

    HAS rods
    HAS-E (Zinc)
    HAS-E-F (Gal)
    HAS-E-R (A4-70)
    HAS-HCR rods

    A4
    316
    Concrete

    Small edge
    distance
    & spacing

    Fire
    resistance

    Corrosion
    resistance

    HCR

    highMo
    High
    corrosion
    resistance

    European
    Technical
    Approval

    CE
    conformity

    Hilti anchor
    design
    software

    Basic loading data (for a single anchor)


    All data in this section applies to

    C
     orrect setting (See setting instruction)

    O
     ne anchor material, as specified in the tables

    N
     o edge distance and spacing influence

    N
     on cracked concrete fc,cyl = 32 MPa

    S
     teel failure

    B
     ase material thickness, as specified in the table

    O
     ne typical embedment depth, as specified in the table

    T
     emperate range I
    (min. base material temperature -40C, max. long term/
    short term base material temperature: +24C/40C)

    Installation temperature range -5C to +40C

    Embedment depth and base material thickness for the basic loading data
    Recommended loads
    Anchor size

    M8

    M10

    M12

    M16

    M20

    M24

    M30

    Typical embedment depth [mm]

    80

    90

    110

    125

    170

    210

    270

    Base material thickness [mm]

    110

    120

    140

    170

    220

    270

    340

    Recommended loads

    Anchor HAS-E (5.8 unless otherwise noted)


    Data according ETA-05/0255, issue 2011-06-23
    Anchor size

    M8

    M10

    M12

    M16

    M20

    M24

    M30*

    Tensile Nrec

    [kN]

    8.1

    12.4

    18.1

    30.7

    53.3

    71.5

    127.4

    Shear Vrec

    [kN]

    4.9

    7.4

    10.9

    20.6

    32.0

    45.7

    120.6

    Note: Contact your Hilti Field engineer for further details

    page 1

    * Grade 8.8

    May 2011

    Product Data Sheet


    HVU with HAS-E rod
    adhesive anchor

    Approvals / certificates
    Description

    Authority / Laboratory

    No. / date of issue

    DIBt, Berlin

    ETA-05/0255 / 2011-06-23

    Fire test report

    IBMB, Braunschweig

    UB-3333/0891-1 / 2004-03-26

    Fire test report ZTV-Tunnel

    IBMB, Braunschweig

    UB 3333/0891-2 / 2003-08-12

    Assessment report (fire)

    warringtonfire

    WF 166402 / 2007-10-26

    European technical approval

    a)

    a) All data given in this section according ETA-05/0255, issue 2011-06-23

    Curing time for general conditions


    Data according ETA-05/0255, issue 2011-06-23
    Temperature of the base material

    Curing time before anchor can be fully loaded tcure

    20 C to 40 C

    20 min

    10 C to 19 C

    30 min

    0 C to 9 C

    1h

    -5 C to - 1 C

    5h

    Setting details
    Data according ETA-05/0255, issue 2011-06-23
    Anchor size

    M8

    M10

    M12

    M16

    M20

    M24

    M30

    Nominal diameter of
    d0
    drill bit
    Effective anchorage
    hef,min
    and drill hole depth
    Diameter of clearance hole
    df
    in the fixture

    [mm]

    10

    12

    14

    18

    24

    28

    35

    [mm]

    80

    90

    110

    125

    170

    210

    270

    [mm]

    12

    14

    18

    22

    26

    33

    Minimum spacing

    smin

    [mm]

    40

    45

    55

    65

    90

    120

    135

    Minimum edge distance

    cmin

    [mm]

    40

    45

    55

    65

    90

    120

    135

    Torque moment a)

    tmax

    [Nm]

    10

    20

    40

    80

    150

    200

    300

    a) T
     his is the maximum recommended torque moment to avoid splitting failure during installation for anchors with minimum
    spacing and/or edge distance.

    page 2

    May 2011

    Product Data Sheet


    HVU with HAS-E rod
    adhesive anchor

    Setting instructions
    Dry and water-saturated concrete, hammer drilling

    For detailed information on installation see instruction for use given with the package of the product.
    For technical data for anchors in diamond drilled holes please contact the Hilti Technical advisory service.

    page 3

    May 2011

    You might also like