Network Access

Solutions Guide
Dial-Up and Dedicated Access
Dedicated Access
Interface Converters
Network Termination & Extension Units
xDSL Modems & Concentrators

Dial-Up Remote Access Servers

Enterprise Solutions
Service Provider Solutions

Our network termination units and

fiber extension products can be deployed in a
wide range of applications on a variety of media, at data
rates from 64 kbps to 2.048 Mbps.

Think of Patton when you need serial (RS-232,

V.24, V.35, RS-530, X.21, and RS-449),
HSSI, and Ethernet interface converters,
and G.703 baluns. Weve been in the
Datacom connectivity business since 1984.

a c c e s s . p a t t o n . c o m

Patton has a complete line of high-speed xDSL modems

with 10Base-T Ethernet, T1/E1, G.703/G.704, voice,
and serial (X.21, V.35, EIA-530, and V.24)
interfaces.

Our dial-up remote access servers

terminate up to 120 analog (V.90,
V.34+, K56Flex) and digital (ISDN)
modem calls from T1/E1 or PRI lines.
Plus, theyre available in scalable packaging
and your choice of Ultra Red, Black Ice, and

Cool White colors.

DEDICATED NETWORK ACCESS

P1

Delivering flexible leased-line services

Interface Converters
Network Termination Units
Network Extension Products
xDSL Modems and Concentrators

P1
P3
P7
P9

DIAL-UP REMOTE ACCESS

P15

Your dial-up on-ramp to the Internet

Enterprise Solutions
Service Provider Solutions
RAS Product Overviews

P15
P17
P19

ORDERING INFORMATION
Remote Access P25
T1/E1/Fiber P25
xDSL Modems P26
Interface Converters P27

P25

P1

dEDICATED NETWORK aCCESS

300 m

Interface Conversion (see P2)

ISDN/PSTN/GSM

1.6 km
ATM/FR/WWW

Network Termination (see P3)

xDSL Network Extension (see P7)

20 km
DDN

50 km

Network Services

Fiber Extension (see P7)

Network Access Technologies for Termination and Extension

Connecting networks using leased-line technologies

Connecting
Digital Networks

using leased-line technologies

Whether you own the circuit, lease it
from the incumbent, or just terminate it,
the NetLink series of transmission
products deliver the right services with
maximum performance.
These products can be deployed in a
wide range of applications on a variety
of media, at data rates from 64 kbps, to
n x 56/64 kbps, to 1.544/2.048 Mbps
(T1/E1) rates. NetLink products have
the interfaces you need and comply with
the necessary standards for safe
deployment worldwide.

Selecting Your Network Access Solution

High-speed access delivers the right connectivity to support the latest Intranet
applications and interconnect those new remote offices. Our NetLink Interface
Converters, T1, E1, xDSL and fiber transmission equipment make all this possible. With
NetLink products, service providers can use transmission equipment to interconnect
corporate offices by deploying:

Interface converters that present serial or Ethernet interfaces to access devices

(see P2).

G.703
Baluns

Network termination units (and CSU/DSUs) that deliver T1/E1 and n x 56/64
kbps services (see P3).

xDSL/Fiber extension devices. xDSL devices increase the networks reach up to

Coax

20 km (12 miles). Fiber devices extend networks up to 50 km (31 miles) (see P7).

Twisted Pair

INTERFACE cONVERTERS
Ethernet Converters
10Base-T Ethernet

X.21

10Base-T Ethernet

V.35

10Base-T Ethernet

EIA-530

10Base-T Ethernet

RS-232

P2

T1/E1, Serial, and Ethernet

Our NetLink devices provide bi-directional interface
conversion to standard serial (V.35, X.21/V.11, V.24,
RS-232, and EIA-530) or Ethernet interfaces.
In corporate enterprise or service provider networks,
many devices use a wide variety of interfaces, which is
why users will always need interface converters.
PATTONs converters connect to just about any combination
of T1/E1, Ethernet, HSSI, and serial interfaces. Our
converters provide standard electrical interfaces, connector
type, and DTE/DCE orientation you require. Select a
PATTON interface converter to solve your interface
compatibility issues.

T1/E1 Converters
Model 2701
T1/E1

X.21

T1/E1

V.35

T1/E1

EIA-530

T1/E1

Ethernet

HSSI Converters
Model 2041

MUX

Serial Converters

V.35

HSSI

X.21

HSSI

RS-422/EIA-530

HSSI

Serial Converters Selection Guide

RS-232 (V.24) DCE

RS-232
(V.24) DTE
Cable

V.35 DTE

RS-449/V.36 DTE

X.21 DTE

RS-530 DTE

2020

2022

2021

2014 2020

2020

2014 2014N

V.35 DCE

2020

Cable

RS-449/V.36 DCE

2022

2015

X.21 DCE

2021

RS-530 DCE

2022

2015

2016 2066

Cable

Cable

2014 2020

2014

Cable

Cable

Model 2020

Model 2066

Model 2021

Model 2014N

Cable

Model 2022

P3

NETWORK tERMINATION UNITS

56/64 to T1/E1 Leased-Line Network Termination
Model 2701

A typical point-to-point leased-line network consists of multiple dedicated connections from branch offices to the
central site. For maximum flexibility and efficiency, portions of the bandwidth available to the central site
(2 Mbps, as shown in the diagram below) can be allocated to each branch office according to the traffic needs
of that office.
Whether the requirement is for 64 kbps or 2 Mbps, corporate customers connecting to a digital data network
can use our Network Termination Units (NTUs) at their branch offices and central site to terminate the network
connection and deliver a serial or Ethernet interface to the customers equipment.
Our family of NTUs can be used in multi-point (switched) leased-line applications (see diagram at right) as well
as point-to-point applications.

DDS/T1 &
G.703/E1

Digital Data Network

Network Termination

Providing last-mile, leased-line

services has never been easier.

384 kbps

512 kbps
768 kbps

2 Mbps

512 kbps

NTUs are installed at the customers

premise to terminate standard
network services and to present
DTE interfaces to user devices.
Pattons NTUs support 56/64 kbps
DDS and T1/FT1 network technologies
used in the United States and Canada.
They also support the G.703/G.704
(E1/FE1) used by the global market.
The NTUs also support flexible
network terminations, including:
10BaseT Ethernet, analog voice,
and G3 fax.

Model 2500 56/64 DDS CSU/DSU

Model 2710 T1/FT1 CSU/DSU

Model 2073 64K/G.703 NTU

Terminates a standard 56/64 kbps DDS network

Terminates a standard T1 network interface

Terminates Co-directional 64k/G.703

Provides twisted-pair100-ohm RJ-48C connections

Supports n x 56/64 kbps networks

Provides twisted-pair 120-ohm RJ-48C connections

Transmits up to 1.6 km/1.0 mile

Serial V.35 port supports speeds up to 1.544 Mbps

Transmits up to 1.6 km/1.0 mile

Provides both V.24 and V.35 interfaces

Transmits up to 1.0 mile

Uses two pair of copper wires

Supports Switched-56 and all-rate DDS

Supports VT100 management

Offers user-selectable interface for DTE devices

INTEGRATED FUNCTIONALITY

P4

Network Termination Units

These devices terminate the transmission interface and convert the signals to serial or Ethernet data. The models include:

56/64 kbps DDS CSU/DSU

64 kbps/G.703 NTU

Model 2450Standalone with fixed serial interfaces

Model 2500Standalone with both V.35 and RS-232 interfaces

Model 2070Micropackage with V.24, V.35 and X.21 interfaces

Model 2073Standalone with modular QuikConnect interfaces

T1/Fractional T1 (Channelized) CSU/DSU

E1/G.703 & G.704 (Channelized E1) NTU

Model 2710Micropackage with V.35 interface and management

Model 2711Micropackage with DIP-switch management

Model 2701Standalone with serial and Ethernet interfaces.

Model 2703Standalone with X.21/V.35 and other serial interfaces
Model 2715Micropackage with V.35 interface and management

Model 2701

384 kbps
Model 2701

768 kbps
G.703/G.704
n x 64 kbps to 2 Mbps
512 kbps

MUX

Model 2701

512 kbps
Model 2701

10Base-T

EIA-530

Model 2701 G.703/G.704 NTU

Model 2703 E1/G.703 NTU

Terminates clear-channel G.703 at 2.048 Mbps
Provides dual-BNC 75-ohm coax and twisted-pair

Terminates G.703 and G.704

V.35

Provides dual-BNC 75-ohm coax and twisted-pair

120-ohm RJ-48C connections
Transmits up to 1.6 km/1.0 mile

120-ohm RJ-48C connections

Transmits up to 300 meters/984 feet
Provides standard X.21, V.35, EIA-530 interfaces

X.21

Provides standard 10Base-T Ethernet, X.21, V.35

and EIA-530 interfaces

P5

NETWORK tERMINATION UNITS

Cost per remote
location
Model 2703

E1/G.703 Point-to-Point Networking

$5,000

When PTT/Telcos introduced high-speed leased lines, they did so with 64-kbps
service. This was followed by 2.048-Mbps (G.703) service. PATTONs Model 2070
connects to 64kbps/G.703 networks, while our Model 2703 supports E1/G.703
networks. These NTUs terminate the PTT/Telco leased lines and convert G.703 to
serial (V.35, X.21, V.24, and EIA-530) interfaces.

G.703/G.704
Get more for less with
Network Termination

Adopt a new strategy for connecting

remote offices to the central site.
Deploy our G.703/G.704 NTUs today.

Central
Site
Integration

Channelized E1 (G.703/G.704) Networking

del

Mo
15

27

The Model 2703 terminates an

E1/G.703 2-Mbps network and
connects to V.24/V.35/X.21 serial
devices.

Corporate Network Managers used these NTUs to connect their workstations at

remote sites to servers across point-to-point leased lines at the central site.
This approach has proven successful and is still being used to bring new remote sites
on line. However, point-to-point G.703 leased lines do not take advantage of the
latest PTT/Telco service: Channelized G.703/G.704 point-to-multipoint leased lines.

The Model 2715 supports Channelized

E1 (G.703/G.704) services and DTE
devices with a V.35 serial interface.
The Model 2701 is a full-featured
G.703/G.704 NTU with serial or
Ethernet interfaces.
All our NTUs are standards-based and
have permission to connect to networks
worldwide. They are the right
G.703/G.704 solutionno matter
where you are.

$3,000

Channelized E1 is a lower-cost solution for connecting central and

remote sites using point-to-multipoint leased lines. With
channelized E1, a central site router with one built-in
G.703/G.704 NTU can interface with up to 30 remote
sites, each running at n x 64 kbps speeds.

Thinking about adding new remote sites? First, integrate

a G.703/G.704 NTU into your central site router. Then use the PTT/Telcos
point-to-multipoint network. Finally, install our Model 2715 (V.35) or Model 2701
(X.21, V.35, and EIA-530) at your remote sites. Doing this will save you up to 40%
off the cost of installing new remote sites, and thats a lot of $ in your pocket!

Ethernet and Channelized E1 Networking

Model 2701

$1,000

Now that youve integrated a

G.703/G.704 NTU into your central
site router, think about reducing
equipment costs at new remote sites
by up to 80%!

Deploy a G.703/G.704 NTU with

a built-in Ethernet LAN interface.
The Model 2701 NTU connects to a G.703/G.704 network and terminates IP traffic onto
an Ethernet LAN. Installation is fastjust set the DIP switches. Its easier to manage and
supportno remote routers to program. And its much less expensive.
As your network grows and your telecom budget doesnt, youll need faster, easier, and
less expensive solutions to get your remote sites on line. The Model 2701 G.703/G.704
NTU is an elegant solution that saves you real money!

Central &
Remote Site
Integration

INTEGRATION AND SAVINGS

No Integration

No
tegration

G.703/E1
Point-to-Point
Network

Serial

NTU

NTU
Serial

Central Site Integration

NTU

G.703/G.704

G.703/G.704
E1 & Fractional-E1
Point-to-Multipoint
Network G.703/G.704

NTU
Serial

Model 2701/I NTU

Central & Remote

Site Integration

G.703/G.704
E1 & Fractional-E1
Point-to-Multipoint
Network

Model 2701/I NTU

Model 2701/I NTU

P6

P7

Ti/Ei NETWORK EXTENSION

2 Mbps

T
1
/
E
1

T1/E1 Network Extension

Our mDSL modems achieve

20 km using 0.9mm copper
wires without repeaters

1.6 km

x
D
S
L

F
I
B
E
R

Our fiber modems achieve

50 km using one strand of
1350nm single-mode fiber

20 km

50 km

When your customers are farther away than 1.6 km

(1.0 mile) from the Telco exchange (Central Office),
use our NetLink xDSL and fiber modems to deliver your
high-speed traffic. Our multi-rate DSL modems extend
G.703/G.704 distances to 20 km (12 miles) over copper,
while our single mode fiber modems extend these
distances to 50 km (31 miles).

T1/E1 Network Termination and xDSL/Fiber Network Extension

xDSL Network Extension

T1/E1
Network Extension

Digital T1/E1and
Fractional-T1/E1 Network

Providing last-mile, leased-line

services has never been easier.

PATTONs 2-wire xDSL modems extend G.703 distances up

to 20 km (12 miles) away from the Telco demarcation
point. Our xDSL product line includes:
Model 1092AModular 64k/128 kbps iDSL modem
Model 1094AModular 64k~1.1 Mbps HDSL modem
Model 1095Modular 64k~2.3 Mbps mDSL modem

T1 and E1 NTUs transmit signals up to

1.6 km/1.0 mile. When the customer is
further away, use our xDSL/Fiber
Network Extension products

Model 1088/1089Fixed-interface mDSL/HDSL modems

Fiber

xDSL

The Model 1088 mDSL and

Model 1193 Single-Mode Fiber
modems extend T1/E1 networks to
user devices across 20 km and 50 km,
respectively.
All our termination and extension
devices connect E1/G.703 and
channelized E1/G.704 network
services at n x 64 kbps data rates to
2 Mbps. They provide both 75-ohm
dual coax & 120-ohm twisted-pair
G.703 network connections, and
EIA-530, V.35, X.21, and Ethernet
user interfaces.
Whether you require a single NTU or a
full rack of xDSL/NTU/fiber modems,
PATTONs NetLink products deliver
leased-line services to the last mile.

Fiber Network Extension

PATTONs fiber modems use just one fiber (single or multi-mode) to extend G.703 distances to 50 km (31 miles) away
from the Telco demarcation point. Our product line includes:
Model 1185256 kbps multi-mode fiber modem

Model 11932 Mbps single-mode fiber modem

Model 11862 Mbps multi-mode fiber modem

Fiber modem
Fiber modem
DDN

Fiber

T1/E1

T1/E1

MUX
PABX

Service Providers Network

Fiber Network Extension

XDSL/FIBER

EXTENSION

P8

Service Providers Network

ATM/FR

PSTN/ISDN

DDN

NetLink Rack System

mDSL
modem

Fiber
modem

T1/E1

xDSL

Serial

T1/E1

T1/E1

G.703/G.704
NTU

mDSL modem

Fiber

Fiber modem

Model 1193 Single-Mode Fiber Modem

Model 1088 2.3 Mbps mDSL Modem

Up to 50 km range (31 miles)

Extends G.703 and G.704

Up to 20 km (12 miles) range

Extends G.703 and G.704

Provides both dual-BNC 75-ohm coax and

twisted-pair 120-ohm RJ-45 connections

Uses one pair of copper wires

Provides both dual-BNC 75-ohm coax and Uses one single-mode fiber line (our
Model 1186 modem supports multitwisted-pair 120-ohm RJ-45 connections
mode fiber)
Connects to G.703/G.704 equipment

Connects to G.703/G.704 equipment

T1/E1

Works on 0.4, 0.5, 0.6, 0.8, and 0.9 mm

(26, 24, 22, 20, and 19 AWG) lines

xDSL modem

xDSL modem
xDSL

ATM/FR Switch

Network Termination and Interface Conversion

xDSL Network Extension

DSL TECHNOLOGY OVERVIEW

P9

ISDN/PSTN/GSM

T1/E1

Transmits data up to 1.6 km (1.0 mile) over 4-wires

DDN

xDSL

ATM/FR/WWW

Network Services

Transmits data up to 20 km (12 miles) over 2-wires

Network Access Technologies for Termination and Extension

xDSL transmits data farther than traditional T1/E1 equipment

What is xDSL
Digital subscribe line

the most economical way to deliver

high-speed services over copper
Digital subscriber line is a lower-cost
method of delivering T1/E1, ISDN,
Frame Relay, ATM, and Internet access
services over longer distances using
the existing Telco copper wiring and
Telco-compatible line coding. In recent
years, new types of DSL have been
introduced that deliver higher speeds
over even longer distances. These
various DSL standards are referred to
collectively by the term xDSL.

Why Use xDSL?

As Telecommunication and Internet Service Providers have been expanding their Internet backbones, many of
them have asked for a high-speed, long-distance modem in standalone and rackmount packaging. At the same time,
corporations expanding their use of the Internet to pursue additional sources of revenue or simply to improve their
customer service are looking for high speed modems that will work with their legacy equipment. For both requirements
the telecommunications industry will use standards-based modems that leverage existing infrastructures to deliver
high-speed, dedicated circuits. Only DSL technology satisfies both business goals and technical requirements.
Digital Subscriber Line (DSL) technology has become the standard by which service providers deliver T1/E1 leased
lines, ISDN PRI access, Frame Relay, Internet Access and low-speed ATM. xDSL technology enables high speed access
through normal, unconditioned copper circuits. PATTONs xDSL modems deliver the most cost-effective solution for
service providers and corporate network managers.

PATTONs xDSL includes iDSL (64/128

kbps), HDSL (n x 64 kbps up to
1.1Mbps), and mDSL (n x 64 kbps up
to 2.3 Mbps).
All our NetLink DSL products use just
two wires (one copper pair) to provide
the highest speeds over the longest
distances in the industry.

DSL technology vs. linespeeds using existing un-conditioned copper circuits

XDSL

NETWORK SOLUTIONS

LAN-to-LAN Connectivity

Remote Office

A Single-Box DSL Solution

Head Office

Accounting Server

Workstation

E-mail Server

P10

Printer

In many environments around the world, end-users and

service providers are installing DSL in point-to-point
campus configurations to extend Intranets, connect off-site
offices or simply to interconnect LANs. Instead of requiring
transmission and networking equipment, our NetLink
mDSL transmission products incorporate the desired
network terminations: (10Base-T Ethernet, analog voice,
and G3 fax) directly into the transmission device.
Now, customers can deploy a single-box solution that
integrates transmission and networking functions.

NetLink Model 1001 Rack

A Variety of Terminations
When building a wide area network of ATM/Frame Relay
switches, T1/E1/Voice switches, or IP backbone routers,
include xDSL modems to provide high speed access circuits.
Deploy our xDSL modems because, at 2.3 Mbps line
speeds they are very fast, and because they come in a
wide array of interfaces.

ATM/FR

ATM/FR and Digital Network Access

mDSL Modem

Our xDSL modems have serial terminations

for FR/ATM/PPP traffic; T1/E1 terminations for
ISDN/DDN/G.703/G.704 traffic; and 10-Mbps Ethernet
terminations for IP/LAN traffic.

2.3 Mbps Over Two Wires

High-Speed
WWW
Access Line

Dedicated Internet Access

64 kbps

Distance up

to 2.3 Mbps

to 20 km

xDSL

xDSL CPE
E-mail Server

DNS Server

ISPs provide dial-up access using remote access servers.

When customers using these 28.8 to 64kbps modems
outgrow their dial-up access connections, their next
logical step is a dedicated access connection using
n x 64kbps speeds. ISPs will want those dial-up customers
to upgrade to their new high-speed dedicated offerings.
Our mDSL modems deliver dedicated access over just two
wires at speeds from 64 kbps to 2.3 Mbps. ISPs will find
that our mDSL modems are the price-performance leader
for delivering high-speed dedicated Internet access.

CONNECT DIGITAL NETWORKS

P11

Mobile User
ISP Router
Branch Offices

2-Wire
Ethernet

DDN

64 kbps to
2.3 Mbps

WWW
Serial/EN
Patton xDSL G.703/G.704
Modem

xDSL standalone modem, QuickConnect

module, and rack card

ISDN

Digital Networks

using leased-line technologies

The NetLink DSL product line supports a
wide range of speeds, user interfaces,
and distances. With easy-to-use
SNMP/HTTP network management and
a host of other standard features, our
DSL modems are the most flexible,
affordable, and reliable in the industry.
PATTON's xDSL modems help keep your
network up-to-date with today's latest
technologies while staying within your
ever-shrinking equipment budgets.

PABX

Selecting Your Access Solution

The NetLink xDSL system consists of modular components that combine to form a low-cost, high density
transmission system. Various symmetric line coding schemes are used to provide high-speed access across
standard copper circuits. NetLink modems are available as standalone units or 19-inch rack cards that
support the following DSL technologies:
iDSLModel 1092/1092A supporting data rates up to 64/128 kbps
HDSLModel 1094A/1089 supporting data rates up to 1.1 Mbps
mDSLModel 1095/1088 supporting data rates up to 2.3 Mbps
All NetLink xDSL standalone models (1095 mDSL, 1094 HDSL, and 1092/1092A iDSL) support
10Base-T Ethernet, T1/E1, G.703/G.704, voice, and serial (X.21, V.35, EIA-530, and V.24) QuikConnect
interfaces.
NetLink xDSL rack cards support 10Base-T Ethernet, G.703, and serial (X.21, V.24, and V.35) interfaces.
The standalone modems and line cards can be powered using 90264VAC supplies or -48VDC (for Telco
environments).

DDM

ATM/FR

PSTN/ISDN

Voice
Customer

Telco Network

Connecting networks using leased-line technologies

Connecting

ATM/FR

NetLink Rack System

Service Providers Network

DSL APPLICATIONS OVERVIEW

Digital Data
Network

P12

iDSL
64k/G.703

V.35 or other
Serial Port

64/128 kbps

64 kbps leased line delivery using iDSL

G.703/G.704
ATM/FR

HDSL

10Base-T

1.1 Mbps

Ethernet

Dedicated ATM/FR network access using HDSL

PSTN/ISDN

Analog Voice

mDSL

FXS/FXO

2.3 Mbps
WWW

Voice/Data interconnection using mDSL

Regional Office

Branch Office
1.1 Mbps
(2W)

mDSL
2.3 Mbps
(2W)
PABX

HDSL

Remote Office
64k/128 kbps
(2W/4W)

iDSL

P13

STANDALONE DSL MODEMS

Fixed or Selectable Interfaces
Maybe you already know exactly which interface youll need for the life of your network installation.
Thats fine, PATTONs low-cost fixed-interface Model 1088 will meet your requirements. But what if you
want to upgrade your modems as your needs change without having to bust your budget? Then you need
our Model 1095 standalone modem with its interchangeable QuikConnect interface modules. Or use a
mixed strategy of installing our modular 1095 standalone/1095 rack card modems at your central site
and low-cost 1088 modems at your remote branch offices. That way you cant lose.

Model 1088

LED Indicators
Enable Visual Monitoring
of DSL Line Status and
Test Modes

NetLink DSL
Standalone and
Rackmount Modems

Managing network connectivity can be a

complex and frustrating chore.
With so many interface types and data
formats to support, youll be relieved to
learn that PATTONs Model 1095 mDSL
standalone/rackmount modems use
interchangeable QuikConnect modules
to support a variety of interfaces
(see diagram). For simpler networking
options (such as providing DSL services
to branch offices) there is our popular
Model 1088 series of fixed-interface
modems that support V.35, X.21,
G.703/G.704, and 10Base-T Ethernet.

Test Mode Switches

Initiate Local and Remote
Loopback Tests from the
Front Panel
Model 1095

Control Port
Allows Configuration and
Management via VT100
(RS-232) Interface
2.3 Mbps DSL Port
Supports data rates from
64 kbps to 2.3 Mbps over
just two wires.

G.703/G.704
Module

Integrated Power Supply

An autosensing 90260 VAC
or -48 VDC power supply is standard.
Just plug it in and get connected.

Optional QuikConnect Modules

Support any of nine standard serial, G.703, or Ethernet interfaces

V.24/RS-232

64k/G.703

Key Selling Points Base Features

Why Use Pattons mDSL Modems ?

Patton
mDSL
Maximum Linespeed 2.3 Mbps

Other
HDSL

BaseBand
Modems

1.1 Mbps

128 kbps

2/4

Wide range of Linespeeds

YES

NO

NO

Selectable DTE interfaces

YES

NO

NO

No. of Wires

20 km

7 km

7 km

SNMP/HTTP Web Mgmt

Maximum Distance

YES

NO

NO

DSL/E1/BBM in one rack

YES

NO

NO

V.35

X.21

EIA-530

4-port Ethernet Hub

Ethernet Bridge

Data, Voice & Fax

RACKMOUNT DSL PRODUCTS

Distance Table Model 1095/1088 mDSL Standalone and Rack Card Modem
NO NOISE
Line
Rate
kbps
144
272
400
528
784
1040
1552
2064

DTE Rates
kbps
64,128
192,256
320,384
448,512
576-768
832-1024
1088-1536
1600-2048
2112-2304

26g (0.4mm)
feet miles km
21400 4.0 6.6
20300 3.8 6.2
18600 3.5 5.7
17400 3.3 5.4
15800 3.0 4.9
15500 2.9 4.8
13600 2.6 4.2
12200 2.3 3.8
11500 2.2 3.5

24g (0.5mm)
feet miles km
30700 5.8 9.4
30600 5.8 9.4
29100 5.5 9.0
26100 4.9 8.0
22600 4.3 7.0
22100 4.2 6.8
19200 3.6 5.9
17200 3.3 5.3
15800 3.0 4.9

22g (0.6mm)
feet miles km
42980 8.1 13.2
42840 8.1 13.2
40740 7.7 12.5
36540 6.9 11.2
29380 5.6 9.0
28730 5.4 8.8
24960 4.7 7.7
22360 4.2 6.9
20540 3.9 6.3

20g (0.8mm)
feet miles km
55260 10.4 17.0
55080 10.4 16.9
52380 9.9 16.1
46980 8.9 14.5
38420 7.3 11.6
37570 7.1 11.6
32640 6.2 10.0
29240 5.5 9.0
26860 5.1 8.3

19g (0.9mm)
feet miles km
64470 12.2 19.8
61200 11.6 18.8
55290 10.5 17.0
49590 9.4 15.3
42940 8.1 13.2
41990 7.9 12.9
34560 6.5 10.6
30960 5.9 9.5
28440 5.4 8.8

DSL Modem Module

I/O Modules
Serial/G.703/Ethernet

Distance table for NetLink mDSL modems

HOME
Ethernet
Frame Relay
ICMP
IP
Products
SNMP
System
TCP
UDP
About
1001MC

1001MC Administration

V.24 (RS-232)
or EIA-530
(DB-25F)

64k/G.703
120-ohm
(RJ-45F)

V.35
(M/34F)

10 Base-T
(RJ-45F)

X.21
(DB-15F)

G.703/G.704
120-ohm (RJ-45F)
75-ohm (Dual-BNC)

Status of Rack 192.168.1.1

Total Configurable Slots Used:

14

Power Supply Status:

Active

% CPU Idle:

90

Total DRAM Detected

8388608

Running Since Last Boot:

4:8:49.24 hours

Immediate Actions
Record Current Configuration
Hard Reset
Set Factory Default Configuration

SNMP/HTTP network management display

NetLink Model 1001 chassis configured with 16 front modems and rear I/O modules

P14

P15

ENTERPRISE SOLUTIONS

E-mail
WWW
File Backup
0

Low

Client
Server

33.6k

Medium

Still Using Modems?

Branch
Office

Tele
Commuting

Basic
Network
Access

Intranet

56k

High

128k

Dial-Up Access Speeds/Applications

Some offices continue to use dial-up modems, terminal

servers, and external routers to address their remote
access requirements. Our RAS includes integrated routing
and digital signal processing to answer up to 120
digital ISDN or analog V.90 modem calls in a 1U high
chassis. This integrated solution saves on equipment
costs, installation, technical support, maintenance, and
day-to-day network management.

Enterprise

RAS

Remote Access Services

The new corporate office is quickly being

defined as any place where work gets
done. Legislative mandates, highway
traffic and employee retention issues are
speeding the growth of telecommuting.
As more companies respond to this
trend, reliable remote access equipment
becomes a necessity.
PATTONs newest remote access servers
have no moving parts and use
convection cooling for maximum
reliability. Our remote access servers
provide dial-up access to company
e-mail, to the corporate Intranet, and
to other resources needed by
telecommuters and remote users.
PATTONs family of RAS products
deliver the right solution for small,
medium, and large offices.

q UOTES
...Patton's web interface makes setting up the
boxes a breeze. Everything is point-and-click
and menu driven.
-Larry Sanford, CEO, Sanford Industries

Central Site LAN

Why Corporations Deploy PATTONs RAS

1 Saves On Office Costs

Maintaining common work areas for flex-time staff

saves money. Employers spend an average of $10,000
per employee providing basic office space, insurance
and other infrastructure. Remote staff costs less.

2 Helps Retain Employees

Most corporations spend 30% of an employees salary
to recruit the employee. Offering even a little relief to
sitting in traffic and providing your employees with
more-flexible work hours pleases your work force and
promotes employee retention.

Extends Geographic Reach

Offering network access and telecommuting programs
makes your company more competitive and attractive.
Now employees and business partners can access the
intranet from anywhwhere

Environmentally Responsible
Fewer employees jamming the roads at rush hour
means less pollution.

It Just Makes Sense

The number of telecommuters continues to grow as
businesses realize that telecommuting is fiscally sound,
good for employees and environmentally responsible.

TELECOMMUTING/DIAL ACCESS

P16

Remote Access
On the road, users want to get online quickly, send their
reports, and get their e-mail. The NetLink RAS offers fast
V.90/ISDN/Mobile connections. By providing a built-in
modem pool, users wont get busy signals either, because
the next available modem will answer.

1/PRI
or
1/PRI

The NetLink RAS includes built-in analog and digital

modems, support for new services like the Wire Access
Protocol (WAP) and support for well-known services like
V.42bps compression. If the goal is to get users on the
network quickly, we offer the fastest turnaround time.
PSTN

ISDN

Telecommuting Access

Telecommuter

SOHO
Router

Rather than fight traffic, telecommuters do their work

from home each day. They require client-server Intranet
Access and the greater bandwidth this application demands.
The NetLink RAS provides for this through integrated
ISDN support and by combining services that use
standards-based Multichassis and MultiLink. With
MultiLink, the bandwidth available from two or more calls
is combined to provide the dial-up user a blazingly-fast
connection. Its just like being at the officewithout the
stress of road rage!

SOHO Router

Branch Office Access

Branch Office

In some offices, where direct contact with customers or

other employees is a must, telecommuting may not be the
answer, but a satellite office is. In that case, corporate
network managers can outfit a small office with a remote
access server so users can access their e-mail, check
status reports on the Intranet and upload projects to their
colleagues at headquarters.
Just install a PATTON NetLink RAS at the site and your
satellite office is ready for business!

RAS FOR SERVICE PROVIDERS

P17

Dial-Up: Your Foundation

RAS systems are the foundation of the Internet Service Providers (ISP) business because they ensure that customers can
dial up when a dedicated connection is either unavailable or unaffordable.
Every telecommuter, mobile user, and consumer wanting to temporarily access the Internet or an Intranet does so
through a dial-up connection between an analog modem or ISDN terminal adapter and a remote access server.

Basic Access & Advanced Services

Dial-Up

Business
Solutions

Remote Access Server

Managed
Communications

Service Providers are expanding

their dial-up access systems as more
users connect to the WWW for
entertainment, education, and
e-commerce. Dial-up is also the
method used to terminate virtual
private networks (VPNs) for
Corporate Intranet access.
Our family of remote access servers
connect these dial-up users to your
network using high-density,
fully- redundant, cost-effective
systems.

Managed
Internet Presence
Managed
Access Service
Basic
Access

K56Flex

V.34+

Dial-Up
Access

Number of Users & Areas Covered

Use High-Density Dial-Up Access

Dial-Up RAS systems have come a long way since the days of 1200 bps modems, terminal servers and bulletin boards.
The NetLink RAS uses the latest in digital signal processor (DSP) technology to terminate analog (V.90, K56Flex,
V.34+, etc.) and digital (ISDN BRI) modem calls. This architecture provides the highest density and ensures the
highest connection speeds at the lowest possible costs. With technology advances driving the continued reduction in
price-per-port, ISPs and Corporate customers alike will benefit from expanding their dial-up access with our NetLink
RAS systems.

V.90
PSTN/ISDN

Dedicated
Access

RAS
T1/E1/PRI

Our RAS supports over 20

signaling methods and
switch types, and 24120
analog or digital modems

FR/PPP

Internet

Our RAS integrates a standard

CSU/DSU, 10/100 Ethernet
ports, and Frame Relay with
PPP/HDLC protocol support

ISDN
SOHO Router

Dial-Up Users

Remote Access Server

Intranet / WWW

INTEGRATED DIAL-UP

P18

This is where access services are added.

For example, these can be remote
access servers for terminating dialup modems or DSL modems for
leased-line connections.

Access

Access Network

Remote Access Servers

T1/E1/PRI Dial-In Trunks from the Telco

DNS, RADIUS, E-mail, WWW/FTP, & News

Distribution

Distribution Network
This is where your access services connect
to your backbone network. Ethernet
defines the ISPs network and glues
everything together.

T1/E1/PRI Dial-In Trunks from the Telco

Ethernet Switch

Local Servers

This is the backbone connection to the

Wide-Area-Network. As the Internet
is a network-of-networks, this
connection is to another ISP.

Core

Core Network

FR/PPP/HDLC Uplink

An Overview of Dial-Up...

Router
Modem

...And Our RAS Product Family

The RAS connects to the local phone company through a T1/E1 or PRI line
and to your local Ethernet switch. When users call to get on-line, the RAS
is the box that will answer the call with a modem. After a dial-in user
connects, the RAS will take IP packets and send them off to the Internet.
Here is how a remote access server works:

The PATTON family of Remote Access Servers provide a standard feature

set for Internet and Intranet Access. Our RAS products fit a variety of
user environments:

A user dials the ISPs access phone number using their

An established ISP expanding into a new location would need the

Modem/Terminal Adapter and Windows Dial-Up Networking.

The call is answered by the RAS with a modem.

Once the modems connect, a PPP session begins between the user
and the RAS.

Through PPP, the RAS obtains the username and password. This is the
same username and password that was typed in by the user before
dialing the ISP.

The RAS queries a RADIUS server and asks to authenticate the user.
Assuming the user is valid, the RAS will automatically issue an IP
address to the user and finish setting up the connection. The user
is now connected and can access any of the ISPs local servers
(E-mail, News, etc.) or any Internet-connected Server.

A start-up ISP will prefer the lower-cost 24/30 port Model 2800
and grow one T1/E1 at a time.
Model 2960 to answer 48/60 calls.

A PTT/Telco building high-density POPs would use our Model 3120

to answer 96/120 dial-up connections and deliver DSL/T1/E1
dedicated connections too.
PATTONs family of RAS products support more calls, come equipped
with more uplink ports, and provide greater reliability in a smaller
package than any of our competitors.

P19

2800 PRODUCT OVERVIEW

DSP Digital Modem

PSTN
PSTN Signaling
Access Server

Authentication
Routing

WAN Forwarding
Internet

NetLink RAS

Use 3rd Generation RAS

The NetLink Model 2800 Remote Access Server can answer a maximum of 30 dial-in modem calls from V.90, K56Flex,
ISDN, V.34+ and legacy modemsall through its built-in T1/E1/PRI ports. Once the user is authenticated, the IP data
is processed by a RISC CPU that is connected to an Ethernet LAN or a Frame Relay/PPP WAN port. Our unique
architecture ensures that the NetLink RAS can scale to meet the demanding requirements of any application including:
Call Centers, Web advertising, ISP access, and traditional Corporate remote access. The NetLink RAS serves many
applications, including: ISP Dial-Up, Corporate Intranet Access, and Hotel Dedicated Internet Access (see diagram at
bottom right).
1.
Answers V.90, ISDN, K56Flex
and V.34 Modem calls
V.90 Modem

Legacy solutions using analog-todigital conversion result in lower

connection speeds. These legacy
devices also require separate analog
modems and ISDN terminal adapters.
The NetLink RAS significant
advantage is its use of digital signal
processors (DSPs) as dynamic
communications processors.
The 24/30 DSPs terminate both
analog and ISDN connections within
the same hardware and using the
same T1/PR1 or E1/PRI trunk.
This solution provides the fastest
connections and allows linear
growthone T1/E1 port at a time.

4.
Routed to the Internet
or Corporate Network

Individual analog ar digital calls

Technical Summary

PSTN/ISDN

K56Flex Modem

V.34+ Modem

Some of the channels

on the T1/E1/PRI can
be used by the RAS for
Internet Access

ISDN T/A
Dial-Up
T1/E1/PRI

2.
From a T1/E1
or PRI Line

WWW

Each color represents

one call on a
T1/E1/PRI

Each call is handled

by one DSP on the
2800 RAS

3.
With Web Browser
Configuration and
Management, plus
Authentication

q UOTES
" Just wanted to let you know I'm pleased
with the 2800. Connections are very sound
and it seems to be less aggressive than the
PM3 in negotiating speeds which results in
more solid connects. The detail information in
the web administration is superior to the
Lucent unit as well..."

Ethernet LAN
IP Packets Routed
to LAN

-Michael Colucci, CoyoteNet

RADIUS Server

DNS Server

Web Server

FR/PPP
Uplink

PC

RAS APPLICATION OVERVIEW

ISP Dial Access

Patton Home Page

The NetLink Remote Access Server can be managed by

a variety of local and remote methods, simultaneously.
Each RAS has a built-in SNMP agent, an embedded HTTP
web server, and a TELNET management interface.

HOME
Import/Export
Authentication
Dial In
Dial Out
Drop and Insert
DSP
Ethernet
Filter IP
Frame Relay
ICMP
Interface
IP
MFR Version 2
RIP Version 2
SNMP
System
System Log
T1/E1 Link
TCP
UDP

All forms of management are available through the Internet,

any dial-up port, the RS-232 console port, or the Ethernet
port. Operators can configure, control, monitor, or receive
status from any interface.

About
License

AUTHENTICATION
Configuration

P20

Remote Access Server

Validation:

static Then Radius(4)

Host Address:

192.168.200.1

Secondary Host Address:

192.168.201.1

Hopst Port:

1812

Timeout:

Retries:

Secret:

frankencelery

NAS Identifier:

Bigdog-1

Accounting Address:

192.168.201.1

Secondary Accounting

192.168.202.1

Accounting Port:

1819

Accounting Enable:

Enable Accounting(1)

RADIUS Packet Format:

fullRfcPacket(0)

Submit

To edit specific static users go back and click on the username.

Hotel Application for RAS

Model 2800 RAS

PABX Extension #111

Internet

T1/E1/PRI
PABX Extension #222

PABX

PABX Extension #888

Our Model 2800 RAS answers
up to 30 dial-up calls and
routes local IP traffic

PABX Extension #333

High-Speed
Access Line

Executive Rooms & Business Center

Here's how it works...

A. Guest connects laptop to room phone line
B. Guest dials local PBX extension (#888) for RAS
C. The guest's laptop is locally connected to the Internet
without having to dial an outside line
D. The hotel satisfies its customers and the Internet Service
Provider gets high margin traffic

2800 Remote Access Server Configuration in an Internet-Ready Hotel

2960 PRODUCT OVERVIEW

96.0

Reporting the Performance

72.0

Performance reporting is built into every NetLink RAS.

With our integrated HTTP Web Server software, the operator
can check on user traffic, examine the statistics, upload new
software, or simply change the RADIUS servers IP Address
from anywhere in the worldusing the Internet.

48.0
24.0
0.0

10

12

14 16 18 20 22

Model 2960
Remote Access Server

The 48/60 port Model 2960 is the

latest addition to our NetLink RAS
family. Expanding ISPs will be
delighted by its dual-redundant
power supply, redundant DSPs, no
cooling fans, and FR/PPP uplink ports.

10 12 14 16

126.0 k
84.0 k
42.0 k
0.0 k

The Model 2960 supports 48 or 60

digital ISDN or analog (V.90, K56Flex,
V.34+, etc.) modem connections in a
single 1U-high (1.75 in./4.45 cm),
19-inch wide rackmount chassis.
Its standard features include a 10/100
Ethernet port, four T1/E1/PRI ports
with built-in CSU/DSUs, and Frame
Relay or PPP protocol support.
The 2960 is the ideal product for
high-density ISP environments.

168.0 k

Bytes per Second

Active Modem

P21

16 14

12

10

22

20 18 16 14 12 10

PSTN

T1/E1/PRI

Up to 60
Dial Users

Up to 60 Dial Users

FR

FR
R
ATM/F

q UOTES

ATM FR

ATM/
F

"I've had one in production for about 3 weeks

now. Yes, Patton's support is phenomenal...
Kudos guys, and if you want more particulars
from a non-biased type. Drop me a line :)"

FR

Up to 60 Dial Users

FR 2Mbps
FR

Ethernet LAN

-Sean Kearns, Catskill Online

Up to 60 Dial Users

E-mail Server

Internet Server

Web Server

ISP REMOTE EXPANSION

Dial-Up Users

V.90

K56Flex

V.34+

P22

Building a Remote PoP

An established ISP expanding into a new calling area,
wants to lowers its expansion costs and produce revenue
by integrating capabilities into the RAS equipment.
The 2960 RAS integrates analog and digital modems,
IP Routing, four CSU/DSUs and Frame Relay/PPP uplink
support. And with dual-redundant, load-sharing power
supplies, the 2960 RAS will run without interruption
even if a power supply fails. The 2960 is the solution for
a new PoP.

Dual T1/E1/PRI
Access Ports

PSTN/ISDN

The 2960 RAS supports over 20

signaling methods and PSTN/ISDN
switch types and 48/60 analog or
digital modems

ISDN SOHO Router

Model 2960 RAS

Intranet/WWW

Dual FR/PPP
UpLink Ports
10/100 Ethernet

Internet

The model 2960 integrates four

standard CSU/DSUs and a 10/100
Ethernet port with Frame Relay and
PPP/HDLC protocol support

2960 Remote Access Server Configuration in a Remote POP

Why use our Model 2960 RAS?

2960 Competitive Positioning

Integrated T1/E1 uplink ports with Frame Relay and PPP.

A temperature sensor-driven convection cooled system
(no fans) and dual-redundant power supplies.

Base Features

From HTTP management, to dual-redundant power supplies, to

FR/PPP uplink integration, the NetLink Model 2960 provides an
all-in-one package for the expanding ISP. Featuring:

Remote PoP for 48/60 ports.

The Model 2960 requires half the space of existing RAS solutions.
With greater reliability and a smaller package than any of its
competitors, the Model 2960 is the cost leader in the industry.

Key Selling Points

The lowest cost-of-ownership for an ISP or Telco building a

Number of V.90 calls

T1/E1/PRI ports
Backhaul/Uplink ports

Patton
2960

Lucent
MAX 4000

Lucent
PM3

48/60

48/60

48/60

Addl $$$

Built-in HTTP/WEB Mgmt

YES

NO

NO

100Base-T Ethernet ports

YES

NO

NO

Self Cooling

YES

NO

NO

Rack Height

1U

2U

2U

Dual Redundant Power

FREE

Addl $$$

Addl $$$

Tech Support

FREE
FREE

Addl $$$

Addl $$$

Addl $$$

Addl $$$

Software Upgrades

P23

3I20 PRODUCT OVERVIEW

Hot-Swap Dual-Redundant Supplies

StandardSupports two AC, two DC, or a
mix of AC and DC power supply modules

Model 3120

HOME
ALL VALUES
Authentication
Dial In
Dial Out
Drop and Insert
DSP
Ethernet
Frame Relay
ICMP
Interface
IP
MFR Version 2
RIP Version 2
SNMP
System
System Log
T1/E1 Link
TCP
UDP
About 2800

Remote Access Server

The next generation of our popular

RAS family is the 3120a modular
platform with more standard features
and functions than any of the
competition.
The 3120 supports up to 120 digital ISDN
or analog (V.90, K56Flex, V.34+, etc.)
modem connections in a 1U-high
(1.75-in./4.45-cm), 19-inch wide
rackmount chassis.
Standard features include hot-swap
dual-redundant power supplies, dual
10/100-Mbps Ethernet ports, and an
expansion slot. By using the expansion
slot for DSL/T1/E1 access, service
providers can increase their revenue by
providing always-on, dedicated
access ports.

q UOTES
"I've switched to Patton Electronics for RAS boxes.
$1500 less and FREE SUPPORT!"
- Paul Farber, Farber Technology

Patton Electronics Company Model 3120 RAS

Software Revision 3.1 Apr 15 2000 09:10:22
Administration
Status of Model 3120
Active Calls:

108

Park Active Calls:

14

Total Calls:

563

% CPU Idle:

88

DSPs Not Working:

Dual 10/100 Ethernet Ports

Flexible integration options for your highperformance network

Total DRAM Detected: 8388608

Running Since last Boot:

140:36:17.43 hour

Immediate Actions
Configuration

Web-Based SNMP/HTTP management

An embedded HTTP server provides complete configuration and
control using standard web browsers

Quad T1/E1/PRI Ports

Terminate any combination of 120 V.90/ISDN connections,
and expand into remote locations using the 3120 as a
complete PoP solution

PMC Expansion Port

The PCI Mezzanine Card (PMC) provides
network expansion to enable the 3120 to
offer additional revenue opportunities
using the same box

3120 Products Highlights

120 connections in a 1U high chassis

Web-based HTTP and SNMP management

Simultaneous Analog/Digital Modems

Dual 10/100-Mbps Ethernet connections

Redundant fans for cool operation

Quad T1/E1/PRI PSTN connections

Redundant AC or DC power supplies

Up to 128 DSPs & 32 Mbytes of DRAM

Dedicated and Dial-up access in one chassis

FLASH download via LAN or WAN ports

DIAL

AND

DEDICATED RAS
Network Access & WAN UpLink

Dial-Up Modem Users

FR/PPP WAN UpLink

Dial-Up & Dedicated (DSL) Access in one RAS solutions

P24

Mobile

T1/E1/PRI Access
WWW

PSTN

V.90

ISDN

3120 RAS
K56Flex

2-w

ire

DSL

DSL

Con

DSL

Ethernet

V.34+

nec

tion

ISDN SOHO Router

DSL

SOHO Router

Telecommuter
Dedicated Users with xDSL & 10/100 Ethernet Access

Branch Office

Dedicated Users with xDSL Access

The 3120 RAS, now available in colorcollect all three...

1 Ultra Red version

2 Cool White version

3 Black Ice version

3120Dedicated & Dial Access

Key Selling Points

Base Features

3120 Competitive Positioning

Number of V.90 calls

T1/E1/PRI ports

Patton
3120

Lucent
MAX 6000

Cisco
AS 5300

3COM
TCH 1000

120

96

120

120

Backhaul/Uplink ports

Access Expansion ports

16+

NONE

NONE

NONE

10/100 Ethernet ports

YES

NO

NO

NO

Built-in HTTP/WEB Mgmt

1U

2U

2U

6U

Dual Redundant Power

FREE

Addl $$$

Addl $$$

Addl $$$

Tech Support

FREE

Addl $$$

Addl $$$

Addl $$$

Software Upgrades

FREE

Addl $$$

Addl $$$

Addl $$$

Rack Height

The 3120 RAS is designed to scale with your customers

requirementsfrom dial-up V.90 analog to ISDN 128 kbps to
dedicated xDSL and fractional T1/E1. Its modular expansion
slot can be used for three basic applications:

Dedicated access using integrated xDSL modems

Advanced services like Virtual Private Networking (VPN)
Wide area network uplinks and serial ports, like V.35
And modular expansion means more customers, larger billings for
newer Managed Access Services and an overall faster return
on your RAS equipment investment. The 3120 RAS delivers
a tightly-integrated dial and dedicated access platform that your
future requires.

a c c e s s . p a t t o n . c o m
Ordering Information

Model 2800
Model Number
Number of Connection

Model 2960/ Model 2996

Model 3120

2800

2810

2860

2960/48

2960/60

2996/96

12

24

30

48

60

96

3120/48 3120/60 3120/72 3120/96 3120/120

48

60

72

96

120

Power Supplies

Single AC

Dual Redundant (Fixed) AC

Dual-Redundant (Hot Swap) AC or DC

Ethernet Ports

One 10Base-T/AUI

One 10/100Base-T

Two 10/100Base-T

4 to 20

WAN Ports

2800/UI

Two T1/E1 ports, 12 digital signal processors (DSPs), 90260 VAC supply

3120/48/UI

Quad T1/E1/PRI, 48-port, expandable RAS; dual redundant AC power

2810/UI

Two T1/E1 ports, 24 digital signal processors (DSPs), 90260 VAC supply

3120/60/UI

Quad T1/E1/PRI, 60-port, expandable RAS; dual redundant AC power

2860/UI

Two T1/E1 ports, 30 digital signal processors (DSPs), 90260 VAC supply

3120/72/UI

Quad T1/E1/PRI, 72-port, expandable RAS; dual redundant AC power

2960/48/UI

Dual T1/PRI, 48-port RAS; load-sharing, dual redundant 90260 VAC supplies

3120/96/UI

Quad T1/E1/PRI, 96-port, expandable RAS; dual redundant AC power

2960/60/UI

Dual E1/PRI, 60-port RAS; load-sharing, dual redundant 90260 VAC supplies

3120/120/UI

Quad TI/E1/PRI, 120-port, expandable RAS; dual redundant AC power

2996/96/UI

Quad T1/E1/PRI, 96-port RAS; load-sharing, dual redundant 90260 VAC supplies

Ordering Information
T1/Fractional-T1 CSU/DSU
2710/CM/xx
2711/CM/xx
2710RC/B/B
2710RC/A/I
2710RC/D/V
2710RC/IA

G.703/G.704 Standalone NTU

T1/FT1 Micropackage CSU/DSU with V.35 Interface and Control Port

T1/FT1 Micropackage CSU/DSU with V.35 Interface (DIP-switch only)
T1/FT1 CSU/DSU Rack Card; EIA-530 Interface
T1/FT1 CSU/DSU Rack Card; V.35 Interface
T1/FT1 CSU/DSU Rack Card; X.21 Interface
T1/FT1 CSU/DSU Rack Card; 10Base-T Interface

Fiber Modems (Single and Multi Mode)

1193/FC/UI
1193/SC/UI
1193RC/FC
1193RC/SC
1186/ST/UI
1186/SMA/UI
1186RC/ST
1186RC/SMA

2701/B/xx
2701/C/xx
2701/D/xx
2701/I/xx
2703/xx
2703-X.21/xx
2715/CM/xx

G.703/G.704 Standalone NTU with EIA-530 (DB-25F) interface

G.703/G.704 Standalone NTU with V.35 (M/34F) interface
G.703/G.704 Standalone NTU with X.21 (DB-15F) interface
G.703/G.704 Standalone NTU with 10Base-T (RJ-45F) interface
E1/G.703 Standalone NTU with Universal interface on a UD-26F connector
E1/G.703 Standalone NTU with an X.21 interface on a DB-15F connector
G.703/G.704 Micropackage NTU with V.35 (M/34F) interface

G.703/G.704 Rack Card NTUs

Single-Mode FC; G.703 dual-BNC and RJ-48C Interface

Single-Mode SC; G.703 dual-BNC and RJ-48C Interface
Single-Mode FC rack card; G.703 dual-BNC and RJ-48C Interface
Single-Mode SC rack card; G.703 dual-BNC and RJ-48C Interface
Multi-Mode ST; G.703 dual-BNC and RJ-48C Interface
Multi-Mode SMA; G.703 dual-BNC and RJ-48C Interface
Multi-Mode ST rack card; G.703 dual-BNC and RJ-48C Interface
Multi-Mode SMA rack card; G.703 dual-BNC and RJ-48C Interface

2701RC/A/I
2701RC/B/B
2701RC/D/D
2701RC/D/V
2701RC/IA
2703RC-45
2715RC/x/y

Rack card NTU; RJ-48C line and V.35 (M/34F) interface

Rack card NTU; RJ-48C line and RS530 (DB-25F) interface
Rack card NTU; dual BNC line and X.21 (DB-15F) interface
Rack card NTU; RJ-48C line and X.21 (DB-15F) interface
Rack card NTU; RJ-48C line and Ethernet/10Base-T (RJ-45F) DTE interface
Rack card NTU; RJ-48C line and EIA-530 (DB-25F) DTE interface
Please order Model 2701RC, which is identical to a 2715RC.

*Power supply options (xx): UI = Universal interface 90260 VAC; 48 = -48 VDC

Standalone Modem
with External Supply

Model 2703

Model 1193
Micropackage Modem
with External Supply

Model 2715

NetLink Model 1001 Rack

Rackmount
Modem
(Front Card)

See Next Page for NetLink 1001 Rack System Ordering Information

Standalone Modem
with Internal Supply

Rackmount
Modem
I/O Module
(Rear Card)

a c c e s s . p a t t o n . c o m
Ordering Information
V.35
1088/C

xDSL Modem Base Units with Fixed Interfaces

1088/C/xx*

2.3 Mbps mDSL modem; V.35 (M/34F) interface

1088/D/xx*

2.3 Mbps mDSL modem; X.21 (DB-15F) interface

1088/I/xx*

2.3 Mbps mDSL modem; Ethernet (RJ-45F) interface

1088/K/xx*

2.3 Mbps mDSL modem; G.703/G.704 interface with Dual-BNC and RJ-48C

G.703/G.704
1088/K

X.21
1088/D

10Base-T Ethernet
1088/I

*Power supply options (xx): UI = Universal interface 90260 VAC; 48 = -36 to -72 VDC

Model 1088

xDSL Modem Base Units with Selectable Interfaces (see below)

1095/xx/PS

2.3 Mbps mDSL modem with selectable interface modules

1095/xx/PS

2.3 Mbps mDSL modem with selectable interface modules

1092A/xx/PS

64/128kbps iDSL modem with selectable interface modules

1092A/xx/PS

64/128kbps iDSL modem with selectable interface modules

Model 1095

Use the following key to order the 109x standalone units with QuikConnect interface modules:
1095 / XX / PS / G
Specify G for 2500V gas tube surge protection
Power supply (UI = 90260 VAC, 48 = -36 to -72 VDC)
Interface module (See Below)
Base unit (1092A, 1094A, or 1095)

G.703/G.704

Interface Modules
A

V.24/RS-232 serial interface on a DB-25F connector

EIA-530/RS-422 serial interface; DB-25F connector

V.35 serial interface on a M/34F connector

X.21 serial (DTE/DCE) interface on a DB-15F connector

Co-directional 64K/G.703 interface on an RJ-48C connector

10Base-T Ethernet interface on an RJ-45F connector

I4

Four 10Base-T interfaces each on an RJ-45F connector

JO

Dual FXO interface ports on an RJ-11F and a serial port on a UD26F connector

JS

Dual FXS interface ports on an RJ-11F and a serial port on a UD26F connector

G.703/G.704 interface on dual-BNC & RJ-48C connector

A V.24/RS-232

B EIA-530

I4 Ethernet Hub

Ethernet Bridge

V.35

JO FXO Voice & Data

D X.21

JS FXS Voice & Data

64k/G.703

K G.703/G.704

xDSL Rack Cards and I/O Modules

1095/1088 mDSL Rack Cards and Interface Modules
1095RC/A/B

2.3 Mbps mDSL Modem with V.24 interface on a DB-25F connector

1095RC/A/I

2.3 Mbps mDSL Modem with V.35 interface on a M/34F connector

1095RC/B/B

2.3 Mbps mDSL Modem with EIA-530 interface on a DB-25F connector

1095RC/D/V

2.3 Mbps mDSL Modem with X.21 interface on a DB15F connector

1095RC/C/O

2.3 Mbps mDSL Modem with 64kbps G.703 interface on a RJ-48C

1095RC/IA

2.3 Mbps mDSL Modem with 10Base-T Ethernet interface on a RJ-45F

1095RC/K/K

2.3 Mbps mDSL Modem with G.703/G.704 interface on dual-BNC and RJ-48C

NetLink 1001 Rack System

*When ordering rackcards for Model 1094A standalones, specify the 1094ARC instead of the 1095RC.

1001R16P/48V

16-slot rack; one -48VDC power supply & rear power entry module

1001R16P/UI

16-slot rack; one 90260VAC power supply with an IEC-320 connector

1001R14P/R48V

14-slot rack; two -48VDC power supplies operating in a load-sharing,

dual-redundant mode.

1001R14P/RUI

14-slot rack; two 90260VAC power supplies operating in a load-sharing,

dual-redundant mode.

1001R14P/RUI48

14-slot rack; one -48VDC & one 90260VAC power supply operating in a
load-sharing, dual-redundant mode.

1092A iDSL Rack Cards and Interface Modules

V.24

V.35

EIA-530

X.21

64k/G.703

10Base-T
Ethernet

G.703/G.704

1092ARC/A/B

64/128 kbps iDSL Modem with V.24 interface on a DB-25F connector

1092ARC/A/I

64/128 kbps iDSL Modem with V.35 interface on a M/34F connector

1092ARC/B/B

64/128 kbps iDSL Modem with EIA-530 interface on a DB-25F connector

1092ARC/D/V

64/128 kbps iDSL Modem with X.21 interface on a DB15F connector

1092ARC/C/O

64/128 kbps iDSL Modem with 64 kbps G.703 interface on a RJ-48C

1092ARC/IA

64/128 kbps iDSL Modem with 10Base-T Ethernet interface on a RJ-45F

1001MC

SNMP/HTTP management module (requires one slot).

*The Model 1092A rackcard supports Models 1092A, 1092, and 1082 standalone iDSL modems.

1001CC

Control module for daisy-chaining additional racks (requires one slot).

Ordering Information
Serial, HSSI & Ethernet Converters

G.703 Baluns

Serial Converters (Cable)

Baluns convert the G.703 interface from 75 W to 120 W. Our G.703 Balun rack-mount equipment
includes 16 dual BNC or 1.6/5.6 coax female connectors for 75 W connections and 16 Shielded RJ48C
plugs for 120 W connections. The models 460RC and 464RC use dual BNC connectors while the 465RC
and 466RC use dual 1.6/5.6 connectors. The models 464RC and 466RC also feature one 64 pin Telco
connector and 16 RJ-48C plugs for 120 W connections.

RS-530 (DB-25) to V.35 (M/34)

RS-449/422 (DB-37) to V.35 (M/34)
X.21 (DB-15) to V.35 (M/34)
RS-232 (DB-25) to V.35 (M/34)
RS-232 (DB-25) to X.21 (DB-25)
RS-232 (DB-25) to V.36 (DB-37)

2014 xy-xy
2015 xy-xy
2016 xy-xy
2020 xy-xy
2021 xy-xy
2022 xy-xy

Model 2O21

Model 460/465RC

Serial Converters (No Cable)

RS-530 (DB-25) to V.35 (M/34)
RS-232 (DB-25) to V.35 (M/34) (DCE/DTE)

2014N xy-xy
2020N x-x

Model 2O14N

HSSI Interface Converters

G.703 Balun Rack-Mount Modular Panel

2040 xy-My
V.35 (M/34) to HSSI Male (HD-50)
2041 xy-My
X.21 (DB-15) to HSSI Male (HD-50)
2042 xy-My
RS-530 (DB-25) to HSSI Male (HD-50)
x= Gender of the coax connector [male (M) or female (F)]

Modular 16-Port, 19-inch, 2U (8.9cm) Rackmountable balun panel

Modular 16-Port, 19-inch, 2U (8.9cm) Rackmountable balun panel

460RC/16/F
465RC/16/F
Model 2O40

Model 464/466RC

y= DCE (C) or DTE (T) Interface.

2. Then you need

1. If you have

DCE

4. Then you need

Converter

G.703 Balun Rack-Mount Chassis

DTE

High density 16-Port, 19-inch, 1U (4.44cm) Rackmountable balun chassis

High density 16-Port, 19-inch, 1U (4.44cm) Rackmountable balun chassis

464RC
466RC

3. If you have
NTU

DTE
DCE

Model 460F

Model 460MC

specify items 2 and 4

Model 20NN x y - x y

DCE/DTE interface (for item 4)

Male/Female gender (for item 4)
DCE/DTE interface (for item 2)
Male/Female gender (for item 2)

Model 465

Example:
2021MT-FC= RS-232 to X.21 converter with
DB-25 Male, DTE to DB-15 Female DCE

Ethernet Interface Converters

2121/DM-*/UI
2124/AM-*/UI
2130/BM-*/UI
2135/CM-*/UI

G.703 Balun

10Base-T Ethernet to X.21(DB-15M)

10Base-T Ethernet to V.24/RS-232 (DB-25M)
10Base-T Ethernet to EIA-530 (DB-25M)
10Base-T Ethernet to V.35 (M/34M)

* S= 6-inch (15cm) serial port cable, L= 6 ft (2m) serial port cable

460x
(E1) 2 Mbps, 75 W dual coax (BNC) to 120 W UTP (RJ-48C)
462x
(E2) 8 Mbps, 75 W dual coax (BNC) to 120 W UTP (RJ-48C)
463x
(E3) 34 Mbps, 75 W dual coax (BNC) to 120 W UTP (RJ-48C)
465x
(E1) 2 Mbps, 75 W dual 1.5/5.6 coax connectors to 120 W UTP (RJ-48C)
x=gender of the coax connector [male (M) or female (F)]

Model 2135

Serial Converters (Rack Card)

2065RC
2066RC
2065-26M/15X
2065-26M/25X
2065-26M/34X

G.703 Balun 460/465 Options

RS-232 to X.21 (UD-26 adapter cables required)

V.35 to X.21 (UD-26 adapter cables required)
Cable, UD-26 Male to DB-15
Cable, UD-26 Male to DB-25
Cable, UD-26 Male to M-34

MC
Two male (6-inch/15.25cm) coax cable connectors for 75 W connection
TB
Terminal block for 120 W connection
PT
RJ-45 male (6-inch/15.25cm) cable connector for 120 W connection
Example: 460F-PT= Female dual coax to male RJ45 6-inch/15.25 cm pig-tail connector

Model 2O65RC

PATTON
is known for our connectivity product
line and our catalogs which we have continuously
grown since 1984. As the definition of connectivity has expanded
to include Internet and Intranet access, PATTON has expanded its focus to
include T1/E1, xDSL and remote access servers. These network access products
provide solutions for a wide range of service provider and corporate applications as
weve described in this Network Access and Solutions Guide.

Since 1984...

All of our network access and connectivity products are

manufactured at our IS09001 facility in
Gaithersburg, Maryland, USA. For additional
information, please browse our website
(http://access.patton.com), order our new
catalog, or contact us by e-mail at
[email protected]

Patton Electronics Company

Gaithersburg, Maryland, USA
Tel: +1 301 975-1000
Fax: +1 301 869-9293
e-mail: [email protected]

Western Europe Office

United Kingdom
Tel: +44 1707 331 447
eFax: +44 870 133-2038
e-mail: [email protected]

Latin America/Caribbean Office

Gaithersburg, Maryland, USA
Tel: +1 301 975-1000
Fax: +1 301 869-9293
e-mail: [email protected]

Middle East/North Africa Office

Lebanon
Tel: +961 4 712 691
eFax: +1 413 832-9194
e-mail: [email protected]

Asia Pacific Office

Hong Kong
eFax: +1 208 728-1210
e-mail: [email protected]

D
C

a
a

t
t

a
a

c
l

o
o

m
g