PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

NORM

EN ISO 14159
Edition: 2008-07-01

Safety of machinery Hygiene requirements


for the design of machinery
(ISO 14159:2002)
Sicherheit von Maschinen Hygieneanforderungen an die Gestaltung
von Maschinen
(ISO 14159:2002)

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

Scurit des machines Prescriptions relatives l'hygine lors de la


conception des machines
(ISO 14159:2002)

Publisher and printing


ON sterreichisches Normungsinstitut
Austrian Standards Institute
Heinestrae 38, 1020 Wien
Copyright ON 2008. All rights reserved!
No part of this publication may be reproduced or
utilized in any form or by any means electronic,
mechanical, photocopying or any other data carries
without prior permission from ON!
E-Mail: [email protected]
Sale and distribution of national and foreign
standards and technical regulations via
ON sterreichisches Normungsinstitut
Austrian Standards Institute
Heinestrae 38, 1020 Wien
E-Mail: [email protected]
Internet: www.on-norm.at/shop
Fax: +43 1 213 00-818
Tel.: +43 1 213 00-805

ICS
Identical (IDT) with
Identical (IDT) with

13.110
ISO 14159:2002-04
EN ISO 14159:2008-04

Supersedes

NORM EN ISO 14159:2004-05

responsible

ON-Committee ON-K 052


Occupational health and safety technology

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

EN ISO 14159

EUROPEAN STANDARD
NORME EUROPENNE
EUROPISCHE NORM

April 2008

ICS 13.110

Supersedes EN ISO 14159:2004

English Version

Safety of machinery - Hygiene requirements for the design of


machinery (ISO 14159:2002)
Scurit des machines - Prescriptions relatives l'hygine
lors de la conception des machines (ISO 14159:2002)

Sicherheit von Maschinen - Hygieneanforderungen an die


Gestaltung von Maschinen (ISO 14159:2002)

This European Standard was approved by CEN on 21 March 2008.


CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION


COMIT EUROPEN DE NORMALISATION
EUROPISCHES KOMITEE FR NORMUNG

Management Centre: rue de Stassart, 36

2008 CEN

All rights of exploitation in any form and by any means reserved


worldwide for CEN national Members.

B-1050 Brussels

Ref. No. EN ISO 14159:2008 E

EN ISO 14159:2008 (E)

Contents

Page

Foreword..............................................................................................................................................................3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 98/37/EC ..............................................................................................4

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2006/42/EC ..........................................................................................5

EN ISO 14159:2008 (E)

Foreword
The text of ISO 14159:2002 has been prepared by Technical Committee ISO/TC 199 Safety of machinery of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 14159:2008 by
Technical Committee CEN/TC 114 Safety of machinery the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14159:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and ZB which are integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

Endorsement notice
The text of ISO 14159:2002 has been approved by CEN as a EN ISO 14159:2008 without any modification.

EN ISO 14159:2008 (E)

Annex ZA
(informative)
Relationship between this European Standard and the Essential Requirements of
EC Directive 98/37/EC

This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive Machinery 98/37/EC, amended by 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1 Correspondence between this European Standard and Directive 98/37/EC
Clause(s)/sub-clause(s) of this EN

Essential Requirements (ERs) of


Directive 98/37/EC, amended by
98/79/EC

All clauses

Annex I, 2.1

Qualifying remarks/Notes
Agri-foodstuffs machinery

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

WARNING Other requirements and other EC Directives may be applicable to the product(s) falling within
the scope of this standard.

EN ISO 14159:2008 (E)

Annex ZB
(informative)
Relationship between this European Standard and the Essential Requirements of
EC Directive 2006/42/EC

This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive Machinery 2006/42/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard given in Table ZB.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
Table ZB.1 Correspondence between this European Standard and Directive 2006/42/EC
Clause(s)/sub-clause(s) of this EN

Essential Requirements (ERs) of


Directive 2006/42/EC

All clauses

Annex I, 2.1

Qualifying remarks/Notes
Foodstuffs machinery etc.

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

WARNING Other requirements and other EC Directives may be applicable to the product(s) falling within
the scope of this standard.

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

INTERNATIONAL
STANDARD

ISO
14159
First edition
2002-04-01

Safety of machinery Hygiene


requirements for the design of machinery

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

Scurit des machines Prescriptions relatives l'hygine lors de la


conception des machines

Reference number
ISO 14159:2002(E)

ISO 2002

ISO 14159:2002(E)

PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.

AS+ Shop 26.09.2015


Zurckziehung: 2008 10 01. Aktuelles Dokument im Austrian Standards Webshop anzeigen

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [email protected]
Web www.iso.ch
Printed in Switzerland

ii

ISO 2002 All rights reserved

You might also like