Coding Modifiers Table
Coding Modifiers Table
Updated 07/12
The following chart has been developed to assist providers in understanding how the Kansas Medical
Assistance Program (KMAP) handles specific modifiers. It is imperative providers understand the
importance of using these modifiers correctly. Improper coding could result in a delayed, denied or
incorrect payment for the service(s) submitted.
Under the Invalid Combination heading on the chart, modifiers are identified which cannot be billed in
combination with the modifier in the first column. For example, a surgeon cannot bill a code with both
the 62 (co-surgeon) and the 80 (assistant surgeon) modifiers on the same detail line. The surgeon can
only act as a co-surgeon (62) or an assistant surgeon (80) for a specific surgery. Only one modifier, 62 or
80, can be submitted. Invalid modifier-to-modifier combinations and inappropriate billing of multiple
modifiers can result in a denial of the service(s) provided.
Certain processing modifiers have different rates based on a percentage of the base code. Under the
Special Coding Instructions heading on the chart, these modifiers are identified and their rates as a
percentage of the base code are given.
The following files are produced by CMS and provide a basis of payment under Medicare. They are
provided to all health care providers and contractors nationally to assure consistent claims processing
for CMS.
To determine the global period of a surgery, refer to the Physician Fee Schedule Relative Value
Files. View and download a copy of the Physician Fee Schedule Relative Value file from the
CMS website at http://www.cms.hhs.gov/PhysicianFeeSched/PFSRVF/list.asp#TopOfPage.
Complete definitions of the PC/TC, Glob Days and Bilat Surg indicators are available on the
CMS website at http://www.cms.hhs.gov/manuals/downloads/clm104c23.pdf.
View and download a copy of the Medicare Clinical Diagnostic Laboratory Fee Schedule from
the CMS website at http://www.cms.hhs.gov/ClinicalLabFeeSched/02_clinlab.asp#TopOfPage.
View and download a copy of the Medicare Durable Medical Equipment, Prosthetics/Orthotics &
Supplies Fee Schedule from the CMS website at
http://www.cms.gov/DMEPOSFeeSched/LSDMEPOSFEE/list.asp?filterType=none&filterByDI
D=-99&sortByDID=3&sortOrder=descending&intNumPerPage=2000.
View and download a copy of the List of Waived Tests file from the CMS website at
http://www.cms.hhs.gov/CLIA/10_Categorization_of_Tests.asp#TopOfPage.
The KMAP website offers additional information on the use of codes and modifiers.
On the public website, access the following links.
o For provider manuals, https://www.kmap-state-ks.us/Public/providermanuals.asp
o For current coverage and pricing information,
https://www.kmap-state-ks.us/Provider/PRICING/RefCode.asp
On the secure website, log in at https://www.kmap-state-ks.us/provider/security/logon.asp.
o From the Publications tab, click Provider Manuals from the drop-down menu.
o From the main menu, click Pricing and Limitations for current coverage and pricing
information.
CPT codes, descriptors, and other data only are copyright 2012 American Medical Association (or such other date of publication of CPT). All
rights reserved. Applicable FARS/DFARS apply. Information on the American Medical Association is available at http://www.ama-assn.org.
Copyright 1995-2012 American Dental Association. Reproduction or republication strictly prohibited without prior written permission.
Information on the American Dental Association is available at http://www.ada.org/.
Modifier
21
Invalid
Combination
22
23
24
25
26
27
This modifier should not be used on procedures which have a PC/TC indicator
equal to 0, 2, 3, 4, 5, 8, and 9 on the Medicare Physician Fee Schedule Relative
Value file. Any procedure billed to Medicaid that has been assigned one of these
indicators will be denied unless Medicaid has instructed differently through
provider bulletins and/or manuals.
Complete definitions of the PC/TC indicators are available on the CMS website. Once within
the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
Modifier 27 is used to identify multiple outpatient hospital E&M encounters on the same
date. This modifier is not to be used by physician practices. It was created exclusively
for hospital outpatient departments.
For hospital outpatient reporting purposes, utilization of hospital resources related to
separate and distinct E&M encounters performed in multiple outpatient hospital settings on
the same date can be reported by adding modifier 27 to each appropriate level outpatient
and/or emergency department E&M code(s).
This modifier cannot be used for physician reporting of multiple E&M services performed
by the same physician on the same date. This modifier is valid for the following CPT code
ranges: 99201 99239, 99241 99255, 99281 99299.
Modifier
32
Invalid
Combination
47
50
51
This modifier should not be used on procedures which have a Bilat Surg indicator
equal to 0, 2, 3 and 9 on the Medicare Physician Fee Schedule Relative Value file.
Any procedure billed to Medicaid that has been assigned one of these indicators
will be denied unless Medicaid has instructed differently through provider
bulletins and/or manuals.
This modifier should only be used on procedures which have a Bilat Surg indicator
equal to 1 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid that has been assigned this indicator will continue to
be processed as normal.
Complete definitions of the Bilat Surg indicators are available on the CMS website. Once
within the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
When a procedure is identified as one that can have modifier 50 added to the base code when
performed bilaterally, bill the procedure code as a single line item on the claim form with
modifier 50 and units of service equal to one. For example, a bilateral tympanostomy must
be billed indicating code 69436 50 as one unit.
When a code states unilateral or bilateral in the description, do not add modifier 50. In
this instance, the base code is billed only once on the claim and the number of units is one.
For example, code 58900 is equal to one unit.
Physicians who perform facet joint injections on both the right and left sides of one level of
the spine must use modifier 50 with the appropriate CPT codes when submitting claims.
Physicians who perform facet joint injections on multiple levels on the same side of the spine
must use the CPT add-on codes to represent these additional levels injected, instead of
using modifier 50. Facet Joint Injection CPT codes are 64470, 64472 (add-on code), 64475,
64476 (add-on code).
Modifier 50 is a processing modifier, and the rate is 150% of the base code.
KMAP uses the Medicare Physician Fee Schedule Relative Value file to determine which
procedures are appropriately billed with modifier 51.
KMAP uses the Mult Proc indicator field on the file as a basis to determine proper usage of
modifier 51. The following determinations have been made based on the individual
indicators.
This modifier should not be used on procedures which have a Mult Proc indicator
equal to 0 and 9 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid that has been assigned one of these indicators will be
denied unless Medicaid has instructed differently through bulletins and/or
provider manuals.
This modifier should only be used on procedures which have a Mult Proc indicator
equal to 1, 2, 3 and 4 on the Medicare Physician Fee Schedule Relative Value file.
Any procedure billed to Medicaid that has been assigned any of these indicators
will continue to be processed as normal.
Complete definitions of the Mult Proc indicators are available on the CMS website. Once
within the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
This modifier cannot be submitted with designated add-on codes (refer to the CPT
codebook for a list of add-on codes). Also, any code with a Glob Surg indicator equal to ZZZ
on the Medicare Physician Fee Schedule Relative Value file is considered an add-on code.
Modifier
52
Invalid
Combination
53
54
55
This modifier cannot be used on procedures unless the Glob Days field is equal to
010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid with modifier 54 and global surgery days other than
010 and 090 will be denied unless Medicaid has instructed differently through
provider bulletins and/or manuals.
This modifier can only be used on procedures which have a Glob Days field equal
to 010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid and assigned global surgery days equal to 010 or 090
will process as normal.
Complete definitions of the Glob Days indicators are available on the CMS website. Once
within the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
When one physician performs the postoperative management and another physician
performs the surgical procedure, the postoperative component can be identified by adding
modifier 55 to the code. Physicians who perform the surgery and furnish all of the usual
pre- and post-operative work bill for the global package by entering the appropriate CPT
code for the surgical procedure only; therefore, modifiers 54 and 55 cannot be combined on
a single detail line item. KMAP uses the Medicare Physician Fee Schedule Relative Value
file to determine which procedures are appropriately billed with modifier 55. KMAP uses the
Glob Days field on the file as a basis to determine proper usage of modifier 55. The
following determinations have been made based on the individual indicators.
This modifier cannot be used on procedures unless the Glob Days field is equal to
010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid with modifier 55 and global surgery days other than
010 and 090 will be denied unless Medicaid has instructed differently through
provider bulletins and/or manuals.
This modifier can only be used on procedures which have a Glob Days field equal
to 010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid that has been assigned global surgery days equal to
010 or 090 will process as normal.
Complete definitions of the Glob Days indicators are available on the CMS website. Once
within the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
Modifier
56
Invalid
Combination
57
58
59
76
62
This modifier cannot be used on procedures unless the Glob Days field is equal to
010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid with modifier 56 and global surgery days other than
010 and 090 will be denied unless Medicaid has instructed differently through
provider bulletins and/or manuals.
This modifier can only be used on procedures which have a Glob Days field equal
to 010 or 090 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid that has been assigned global surgery days equal to
010 or 090 will process as normal.
Complete definitions of the Glob Days indicators are available on the CMS website. Once
within the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
Modifier 57 indicates an E&M service resulted in the initial decision to perform surgery
either the day before a major surgery (90-day global period) or the day of a major surgery
(90-day global period). Modifier 57 can only be used on E&M codes.
KMAP denies services billed with modifier 57 on codes other than E&M codes.
It may be necessary to indicate the performance of a procedure or service during the
postoperative period was (a) planned or anticipated (staged); (b) more extensive than the
original procedure; or (c) for therapy following a surgical procedure. Complications from
surgery which do not require a return trip to the operating room are considered part of the
global surgery package from the original surgery and are not payable separately. Modifier 58
is not appropriate in this situation.
Note: For treatment of a problem that requires a return to the operating or procedure
room (e.g., unanticipated clinical condition), see modifier 78.
Modifier 58 cannot be appended to ambulatory surgical center (ASC) facility fee claims.
Modifier 58 cannot be appended to a procedure with XXX in the Glob Days field on the
Medicare Physician Fee Schedule Relative Value File. Complete definitions of the Glob
Days indicators are available on the CMS website. Once within the document, perform a
word search for MPFSDB Record Layouts and look for the particular year in question (such
as 2008, 2009).
Modifier 59 can be used for a different session, different procedure or surgery, different site
or organ system, separate incision or excision, separate lesion, or separate injury.
The following example illustrates the appropriate usage of this modifier: A patient with a leg
wound comes in for a culture of the site of the wound. The lab tech obtains independent
specimens per the order, one from the proximal wound site and one from the distal wound
site. This is coded as follows: 87071 (for the proximal site) and 87071 59 (for the distal site).
Modifier 59 is appropriately appended to the second code to identify it was a different site
from the first specimen. Modifier 59 cannot be used on E&M service codes or on code
77427. KMAP denies E&M codes and code 77427 when billed with modifier 59.
Documentation must be submitted with the claim which supports that a different session or
patient encounter, different procedure or surgery, different site or organ system, separate
incision or excision, separate lesion, or separate injury (or area of injury in extensive
injuries) not ordinarily encountered or performed on the same day by the same physician.
When two surgeons work together as primary surgeons performing distinct part(s) of a
procedure, each surgeon must report his or her distinct operative work by adding modifier 62
to the procedure code and any associated add-on codes for that procedure as long as both
surgeons continue to work together as primary surgeons. Each surgeon should report the
co-surgery once using the same procedure code. If additional procedure(s) including add-on
procedure(s) are performed during the same surgical session, separate code(s) can also be
reported with modifier 62 added.
Modifier
62
Invalid
Combination
26, 66, 80, 81, 82,
AS, TC
63
66
73
74
76
59, 77
Modifier
77
Invalid
Combination
76
78
79
80
81
82
90
Modifier
90
91
92
99
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AD
AE
AF
AG
AH
AI
AJ
Invalid
Combination
76, 77
Modifier
AJ
AK
AM
AP
AQ
AR
AS
AT
AV
AX
AY
AZ
BA
BL
BO
BP
BR
BU
Invalid
Combination
Modifier
CA
CB
CC
CD
CE
CF
CG
CR
CS
DA
DH
DN
E1
E2
E3
E4
EA
EB
EC
ED
EE
Invalid
Combination
The test was ordered by a doctor providing care to patients in the dialysis facility.
The test is not included in the dialysis facility's composite rate payment.
This modifier is not to be used by the provider community. It is an internal modifier
identifying when the carrier changes the procedure code submitted.
These modifiers were developed for Medicare purposes. Medicare uses these modifiers as
pricing modifiers to identify the different payment situations for ESRD Automated
Multi-Channel Chemistry (AMCC) services. The ESRD clinical diagnostic laboratory tests
identified with modifier CD, CE, or CF cannot be billed as organ or disease panels.
However, KMAP has determined it would be appropriate for modifiers CD, CE, and CF to
be used only on the following codes:
82040, 82247, 82248, 82310, 82330, 82374, 82435, 82465, 82550, 82565, 82947, 82977,
83615, 84075, 84100, 84132, 84155, 84295, 84450, 84460, 84478, 84520, 84550
If these modifiers are billed to Medicaid on codes other than the ones listed previously, the
service will be denied.
This modifier can be submitted with all HCPCS and CPT codes.
HCPCS modifier CR is used by Medicare to track and facilitate claims processing for
disaster victims. This modifier can only be submitted with services that are related to a
disaster or catastrophe, such as Hurricane Katrina in 2005.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
This modifier is used on claims for ambulance services.
Modifiers which are used on claims for ambulance services are created by combining two
alpha characters. Each alpha character, with the exception of X, represents an origin (source)
code or a destination code. The pair of alpha codes creates one modifier. The first position
alpha code equals origin; the second position alpha code equals destination.
Origin and destination codes are the following: D, E, G, H, I, J, N, P, R, S and X.
These modifiers are anatomic-specific modifiers. These modifiers are for surgical and
diagnostic services. These modifiers are not for E&M services.
When eyelid procedures are coded, instead of modifier RT or LT, the procedure code must
be appended with modifiers E1 through E4 to indicate upper and lower eyelid.
For example: Same Claim Detail Line Item 1: 67916 E1; Detail Line Item 2: 67916 E3
CMS uses these modifiers to gather information to determine the prevalence and severity of
anemia associated with cancer therapy, the clinical and hematologic responses to the
institution of antianemia therapy, and the outcomes associated with various doses of
antianemia therapy.
If these modifiers are used, they are only valid when submitted with the following HCPCS
codes on non-ESRD claims for ESAs:
J0881, J0882, J0885, J0886 and Q4081
CMS uses this modifier for national claims monitoring for ESAs administered to ESRD
patients receiving dialysis in a renal dialysis facility.
Submit this modifier when the following criteria are met:
The patient's hematocrit level has exceeded 39.0% (or hemoglobin level has
exceeded 13.0g/dl) for three or more consecutive billing cycles immediately prior
to and including the current billing cycle.
Modifier
EH
EJ
EM
EP
ET
EY
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
Invalid
Combination
10
Modifier
FC
Invalid
Combination
FP
G1
G2
G3
G4
G5
G6
G7
G8
G9
GA
GB
GC
GD
GE
GF
GG
GH
QS
This modifier can only be submitted with the following CPT codes: 00940, 01964, 01965,
01966, 59840, 59841, 59850, 59851, 59852, 59855, 59856, 59857, 59866, S0190, S0191,
S0199, and S2260.
KMAP will deny the service if this modifier is billed with any code other than those listed
previously. For further information, refer to the Professional Provider Manual.
Modifier G8 should only be used with the following anesthesia codes: 00100, 00160, 00300,
00400, 00532, and 00920. KMAP will deny the service if this modifier is billed with any
code other than those listed previously.
Submit this modifier only with anesthesia services (such as codes 00100 01999).
KMAP will deny services billed with modifier G9 on codes other than the anesthesia series
of codes.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
Modifier GC must be used by the physician for teaching physician services. A teaching
physician service billed using this modifier is certifying that he or she has been present
during the key portion of the service and was immediately available during the other parts of
the service.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
Submit this modifier with services performed by a resident in a teaching facility without the
presence of a teaching physician.
This modifier is informational and can only be submitted with procedure codes included in
the primary care exception:
HCPCS code: G0344
CPT codes: 99201 99203, 99211 99213, 93005 and 93041
For services rendered in a critical access hospital (CAH) by a nurse practitioner (NP),
clinical nurse specialist (CNS), certified registered nurse (CRN) or physician assistant (PA),
use this modifier.
Modifier GG is used when a diagnostic and a screening mammogram are performed on the
same day for the same patient. Modifier GG is added to the diagnostic mammography code
only. Both the diagnostic and screening codes must be billed on the same claim form. Submit
modifier GG with the diagnostic mammography code. CMS uses this modifier for tracking
and data collection purposes.
This modifier can be submitted with the following codes:
CPT codes: 76082, 76090, 76091, 77051, 77055 and 77056
HCPCS codes: G0204, G0206, and G0236
KMAP will deny the service if this modifier is billed with any code other than those listed
previously.
When a screening mammogram indicates a potential problem, the interpreting radiologist
can order additional films during the same visit on the same day without an additional order
from the treating physician. The radiologist must report to the treating physician the
condition of the patient. These additional films, with the report to the treating physician,
convert a screening mammogram to a diagnostic mammogram. The procedure code is
reported with modifier GH to indicate the radiologist converted the screening mammogram
to a diagnostic mammogram.
11
Modifier
GH
GJ
GK
GL
GM
GN
GO
GP
GQ
GR
GS
Invalid
Combination
12
Modifier
GT
GU
GV
GW
GX
GY
GZ
H9
HA
HB
HC
HD
HE
HF
HG
HH
HI
HJ
Invalid
Combination
13
Modifier
HK
HL
HM
HN
HO
HP
HQ
HR
HS
HT
HU
HV
HW
HX
HY
HZ
J1
J2
J3
J4
JA
JB
JC
JD
JW
K0
K1
K2
K3
K4
KA
KB
Invalid
Combination
At this time, there are no special coding instructions applicable to Medicaid claims billing
for these modifiers.
These modifiers are informational only and can be submitted with all injection codes.
Modifiers JC and JD can be used with codes Q4100 through Q4114.
Use this modifier when submitting a claim for drugs that were discarded,
not administered. Submit the used and unused portions of the drug on a single detail line.
Prosthetic claims for knees, feet and ankles should be submitted with modifiers K0 through
K4, indicating the expected patient functional level.
This modifier can be submitted with codes L5000 L5999.
KMAP will deny the service if this modifier is billed with any code other than those listed
previously.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for these modifiers.
14
Modifier
KC
Invalid
Combination
KD
KE
KF
KG
KH
KI
KJ
KK
KL
KM
KN
KO
KP
KQ
KR
KS
KX
KT
KU
KV
KW
KX
KS
KY
KZ
LC
LD
KMAP uses the Medicare Durable Medical Equipment, Prosthetics/Orthotics & Supplies Fee
Schedule to determine which procedures can be billed with modifiers KL, KM, and KN.
Applicable procedure codes appear on the file with modifier KL, KM, or KN (such as
A4233 KL, L8040 KM, L8047 KN). Any procedure not listed with modifier KL, KM, or KN
will be denied by KMAP.
Use modifier KO when a single drug is dispensed in a unit dose container. Modifier KO
should not be used with the concentrated form codes or HCPCS code J7621.
Use modifiers KP and KQ when two or more drugs are combined and dispensed to a patient
in the same unit dose container. Add modifier KP to one of the unit dose form codes and
modifier KQ to all other unit dose codes. The use of modifiers KP and KQ should result in a
combination yielding the lower cost to the beneficiary. Modifiers KP and KQ are not used
with the concentrated form codes or HCPCS code J7621.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
The local policy E2004-040 (Coverage of Diabetic Supplies) established the invalid
modifier-to-modifier combination of KS and KX. Modifier KX must be used if the
beneficiary is insulin treated (insulin dependent diabetic). Modifier KS must be used if the
beneficiary is not insulin treated (noninsulin dependent diabetic). Modifiers KX and KS
cannot be billed together on a single detail line. If no modifier is included, the claim will
deny. For further billing/coding instructions, refer to the Home Health Agency Provider
Manual and Durable Medical Equipment Provider Manual.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
The local policy E2004-040 (Coverage of Diabetic Supplies) established the invalid
modifier-to-modifier combination of KS and KX. Modifier KX must be used if the
beneficiary is insulin treated (insulin dependent diabetic). Modifier KS must be used if the
beneficiary is not insulin treated (noninsulin dependent diabetic).
Modifiers KX and KS cannot be billed together on a single detail line.
If no modifier is included, the claim will deny.
For further billing/coding instructions, refer to the Home Health Agency Provider Manual
and Durable Medical Equipment Provider Manual.
If a service is billed with modifier KY, it will be denied.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
Under certain circumstances, a physician may need to indicate a procedure or service was
distinct or independent from other services performed on the same day. HCPCS modifier LC
is used to identify situations when it is appropriate to submit these specific CPT codes for
separate reimbursement.
This modifier can be submitted with the following CPT codes: 92980 92982, 92984,
92978 92982, 92995 92996, 93556 and 93971.
This modifier can be submitted with the following CPT codes: 92973, 92978,
92980 92982, 92984, 92995 92996 and 93571 93573.
15
Modifier
LL
LO
LR
LS
LT
M2
MS
NB
NR
NU
PA
PB
PC
PI
P1
P2
P3
P4
P5
P6
PL
PS
Invalid
Combination
50
16
Modifier
PT
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
QC
QD
QE
QF
QG
QH
QJ
QK
QL
QM
QN
QP
QS
QT
QW
QW
Invalid
Combination
17
Modifier
Invalid
Combination
QX
QY
QZ
RA
RB
RC
RD
RE
RP
RR
RT
SA
SB
SC
SD
SF
SG
SH
SJ
SK
SL
SL
SM
50
18
Modifier
SN
SQ
SS
ST
SU
SV
SW
Invalid
Combination
Submit modifier SW with the following codes when provided by a certified diabetes
educator.
Medical Nutrition Therapy (MNT): CPT codes 97802 97804, HCPCS codes
G0270 G0271
Use Modifier SY only with the following codes for immunization, when appropriate: 90371,
90375, 90376, 90385, 90465, 90466, 90467, 90468, 90471, 90472, 90473, 90474, 90585,
90586, 90632, 90633, 90645, 90647, 90648, 90655, 90656, 90657, 90658, 90660, 90663,
90669, 90675, 90691, 90700, 90702, 90703, 90704, 90705, 90706, 90707, 90713, 90714,
90715, 90716, 90717, 90718, 90721, 90732, 90733, 90735, 90740, 90743, 90744, 90746,
90747, G0008, G0009, G0010, G9141, and G9142.
KMAP will deny the service if this modifier is billed with any code other than those listed
previously.
Modifiers T1 through T9 are appropriate for surgical and diagnostic services.
These modifiers are not appropriate for E&M services.
SY
T1
T2
T3
T4
T5
T6
T7
T8
T9
TA
TC
TD
TD
This modifier must not be used on procedures which have a PC/TC indicator equal
to 0, 2, 3, 4, 5, 6, 8, and 9 on the Medicare Physician Fee Schedule Relative Value
file. Any procedure billed to Medicaid which has been assigned one of these
indicators will be denied unless Medicaid has instructed differently through
provider bulletins and/or manuals.
This modifier must only be used on procedures which have a PT/TC indicator
equal to 1 or 7 on the Medicare Physician Fee Schedule Relative Value file. Any
procedure billed to Medicaid that has been assigned either indicator will continue
to process as normal.
Complete definitions of the PC/TC indicators are available on the CMS website. Once within
the document, perform a word search for MPFSDB Record Layouts and look for the
particular year in question (such as 2008, 2009).
The following local policies established modifier TD as appropriate for use with
code T1000.
19
Modifier
TE
TF
TG
TH
TJ
TK
TL
TM
TN
TP
TR
TS
TT
TU
TV
TW
U1
U2
U3
U4
U5
U6
U7
U8
U9
UA
UB
UC
UD
Invalid
Combination
At this time, there are no special coding instructions applicable to Medicaid claims billing
for these modifiers.
Modifier U4 can be used with code T2046 to indicate a hospice reserve bed day. Reserve bed
days are paid at 67% and are limited to 10 days per confinement. KMAP will deny the
service if this modifier is billed with any code other than T2046.
Modifier U5 can be used on code T1017, when appropriate. KMAP will deny the service if
this modifier is billed with any other code. For further information, refer to the Targeted
Case Management Frail Elderly Provider Manual.
Modifier U6 can be used on codes T1017, S5125, or S5126, when appropriate. KMAP will
deny the service if this modifier is billed with any other codes.
For further information, refer to the HCBS Physical Disability Provider Manual or HCBS
Traumatic Brain Injury Provider Manual.
Modifier U7 can be used on code T1017, when appropriate. KMAP will deny the service if
this modifier is billed with any other code.
For further information, refer to the Money Follows the Person Provider Manual.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
Modifier U9 can be used on codes S5125 or S5126, when appropriate.
KMAP will deny the service if these modifiers are billed with any other codes.
For further information, refer to the HCBS Physical Disability Provider Manual or HCBS
Traumatic Brain Injury Provider Manual.
Modifier UA can be used with code S5125, when appropriate, for Attendant Care Services
for HCBS Frail Elderly beneficiaries in assisted living facilities, residential health care
facilities, and home plus settings and for MFP Frail Elderly beneficiaries in assisted living
settings. KMAP will deny the service if this modifier is billed with any other code.
Modifier UB can be used on codes T1017, S5125, or S5126, when appropriate. KMAP will
deny the service if this modifier is billed with any other codes.
For further information, refer to the Targeted Case Management Traumatic Brain Injury
Provider Manual, HCBS Physical Disability Provider Manual, or HCBS Traumatic Brain
Injury Provider Manual.
Modifier UC can be used on code S5126, when appropriate. KMAP will deny the service if
this modifier is billed with any other code.
Modifier UD can be used on codes S5125 or S5135, when appropriate. KMAP will deny the
service if this modifier is billed with any codes other than S5125 or S5135.
For further information, refer to the HCBS Frail Elderly Provider Manual.
20
Modifier
UE
UF
UG
UH
UJ
UK
UN
UP
UQ
UR
US
V5
V6
V7
V8
V9
VP
Invalid
Combination
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier. (This modifier is to be used only by the NEMT broker. KMAP will deny
the service if this modifier is billed by any other entity.)
Use modifiers UN, UP, UQ, UR, and US with code R0075, when appropriate.
The units field must reflect 1 except in extremely unusual circumstances. The units field
must never be used to report the number of patients served during a single trip. The units
field must reflect the number of services the specific beneficiary received, not the number of
services received by other beneficiaries. KMAP will deny the service if these modifiers are
billed with any code other than R0075.
Note: If only one patient is seen at a particular location, report code R0070 without
a modifier.
At this time, there are no special coding instructions applicable to Medicaid claims billing
for this modifier.
This modifier is informational only and can be submitted with the following service
categories: Medical Care, Surgery, Consultation, Diagnostic Radiology, Anesthesia,
Assistant at Surgery, Other Medical Items or Services, Ambulatory Surgical Center, and
Facility Usage for Surgical Services.
21