Scribd Logo
Upload

Welcome to Scribd!

  • 772 views

    1 MVA - TRANSFORMER - Technical Sheet Kirloskar

    Uploaded by

    INDRAJIT SAO
    This document provides the guaranteed technical particulars of a 1 MVA, 6.6/0.725 kV core type cast resin dry type transformer according to Indian Standards. It specifies details of the transformer such as its rating, insulation class, cooling type, termination, temperature rise, and tests to be performed. The transformer will be used as an input transformer for a variable frequency drive motor and its technical specifications are in accordance with relevant Indian Standards for such equipment.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    1 MVA - TRANSFORMER - Technical Sheet Kirloskar

    Uploaded by

    INDRAJIT SAO
    772 views10 pages
    This document provides the guaranteed technical particulars of a 1 MVA, 6.6/0.725 kV core type cast resin dry type transformer according to Indian Standards. It specifies details of the transformer such as its rating, insulation class, cooling type, termination, temperature rise, and tests to be performed. The transformer will be used as an input transformer for a variable frequency drive motor and its technical specifications are in accordance with relevant Indian Standards for such equipment.

    Original Description:

    ONE MVA TRANSFORMER TECHNICAL DATA SHEET

    Original Title

    1 MVA_TRANSFORMER_Technical Sheet Kirloskar

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the guaranteed technical particulars of a 1 MVA, 6.6/0.725 kV core type cast resin dry type transformer according to Indian Standards. It specifies details of the transformer such as its rating, insulation class, cooling type, termination, temperature rise, and tests to be performed. The transformer will be used as an input transformer for a variable frequency drive motor and its technical specifications are in accordance with relevant Indian Standards for such equipment.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    772 views10 pages

    1 MVA - TRANSFORMER - Technical Sheet Kirloskar

    Uploaded by

    INDRAJIT SAO
    This document provides the guaranteed technical particulars of a 1 MVA, 6.6/0.725 kV core type cast resin dry type transformer according to Indian Standards. It specifies details of the transformer such as its rating, insulation class, cooling type, termination, temperature rise, and tests to be performed. The transformer will be used as an input transformer for a variable frequency drive motor and its technical specifications are in accordance with relevant Indian Standards for such equipment.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 10

    GUARANTEED TECHNICAL PARTICULARS

    Sl. No. Particulars

    Specification

    1 MVA, 6.6/.725 KV

    VOLTAMP

    IS 2026,
    Part I 1977
    Part II - 1977
    Part III 1981
    Part IV 1977
    IS11171-1985

    Type

    Three phase, core type, cast


    resin dry type

    Application

    Input transformer to VFD for


    Motor

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12

    Duty
    Degree of Protection of Enclosure
    Voltage HV/LV
    Frequency
    No. of phase
    Continuous rating
    Conductor
    Insulation class
    Cooling
    Winding connection
    Vector group
    Neutral grounding

    13

    System earthing

    14

    Percentage impedance

    Indoor, installed in room


    IP 42
    6.6 / 0.725 kV
    50 Hz
    3
    1000/500-500 KVA
    Copper
    Class H or Better
    Air Natural
    Delta / Star
    Dyn11d0
    Effectively earthed
    HV-Unearthed
    LV-Effectively earthed
    6.25%
    HV- Cable end box suitable for
    termination of XLPE aluminium
    cables, with air insulated
    disconnecting chamber

    15

    Termination
    LV- Cable end box suitable for
    termination of XLPE aluminium
    cables, with air insulated
    disconnecting chamber

    16

    Temperature rise over 50C ambient temp


    a) In winding (measured by Resistance method)
    b) Core and other adjacent parts of winding
    c) Core and other parts not adjacent of windings

    90C
    90C
    Within safe limit of core and
    adjacent materials

    Bushing mounted CTs


    17

    CT in LV Neutral bushing for standby E/F protection

    Ratio : 500/5 A
    Class : 10P15

    18

    Tap changer
    a)Range
    b) Total tap positions
    c) Taps above nominal voltage
    d) Taps below nominal voltage
    e) Voltage per step variation
    f) Tap change controls

    OCTC
    5%
    5
    2
    2
    2.50%
    Manual

    19

    Impulse test withstand voltage

    As per IS 2026, Part III 1981

    power frequency voltage withstand


    a) primary
    b) Secondary

    Induced over voltage withstand


    a) primary
    b) Secondary

    Full wave lighting impulse withstand voltage


    a) primary
    b) Secondary

    a) 60 KVp b) N/A

    Short circuit withstand capacity at Terminal


    a) For 1 sec
    b) For 3 sec
    c) For 5 sec

    40 ka for 3 Seconds

    20
    21
    22

    Short circuit level on HV side


    Short circuit level on LV side
    Auxiliary supply voltage

    40 kA for 3 Seconds
    50 kA for 3 Sec
    240 AC

    23

    Parallel operation

    24
    25
    26
    27

    Overload capacity
    Magnetizing current
    Paint
    Paint shade

    28

    Current Density

    2.5 A/mm2 Max

    29

    Mandatory Spares

    Bidder to Include

    30

    Special tools & tackles & commissioning


    spares

    Bidder to Include

    31

    Current rating - Primary/Secondary (amp)

    32

    Separate Neutral Bushing terminal for earthing

    a) 20 KV b) 3 KV
    Shall withstand double voltage &
    double frequency for 60 Secs.

    Suitable for parallel operation


    with transformers of similar
    ratings
    As per IS 6600 1972
    0.3% of rated current
    Epoxy
    Shade 632 as per IS 5

    87.48 Amps. At HV side &


    398.17 in LV1 & 398.17 in
    LV
    2
    Required

    33

    Neutral terminal to be brought down to accessible


    level

    34

    Regulation at full load and at 75degC


    a) At UPF
    b) At 0.8 PF

    35

    Loss & Efficiency

    36

    No load loss
    a) At 100% voltage
    b) At 110%voltage

    37

    Excitation loss at flux density 1.7 Wb/Sqm

    38

    Load loss at 75 degC


    a) At full load
    b) At half load

    39

    Efficiency at 75degC for UPF at


    a) full load
    b) 3/4 th load
    c) 1/2 load

    a) 98.853 b) 99.012 c) 99.098

    40

    Efficiency at 75degC for 0.8lag PF at


    a) full load
    b) 3/4th load
    c) 1/2 load

    a) 98.571 b) 98.767 c) 98.875

    41
    42
    43
    44
    45
    46

    Max efficiency
    Load at which max. efficiency occurs

    99.099
    48%

    47

    Winding Conductor material

    48
    49
    50
    51
    52
    53
    54

    Insulating Material
    Between Turns
    Between Core & winding
    Between Winding
    Of core laminations

    Material & Type


    Core material /grade
    Flux density at rated voltage & at normal tap
    Flux density at 110% rated voltage at normal tap

    Bushing
    Make

    55

    Bushing Type / Voltage rating / rated current


    a) primary
    b) Secondary

    56

    Bushing insulation level (KV) :


    a) Impulse withstand HV/LV bushing
    b) Dry withstand HV/LV bushing
    c) wet withsatnd HV/LV bushing
    d) Flashover withstand HV/LV bushings

    57

    Total creepage distance of HV/LV bushings

    Required
    a) 1.131 b) 4.555

    a) 2.2 KW ( Sub IS Tol ) b) 3.3


    KW ( Approx )
    1.0 watt/kg
    a) 9.4 KW ( Sub to IS Tol ) b) 2.35
    KW ( Sub to IS Tol

    CRGO Silicon Steel


    1.7 Tesla
    Bidder to specify
    Electrolytic Annealed Copper
    conductor
    Fiber Glass
    Expoxy + Air
    Expoxy + Air
    Carlite
    Bidder to Specify
    a) 12 KV, 250 Amps, b) 1KV,
    1000 Amps.

    IEC standard ( 1.5 x Full wave)

    25 mm/KV

    58
    59
    60

    Arcing Horn gap

    Bidder to specify

    Current Transformer
    CT make for REF/Earth fault protection

    Bidder to specify

    61

    CT type/Qty/Ratio/Burden/Accuracy

    62

    Fitting & accessories(Transformer protection relay)

    63

    Power Cable Box Included with


    a) weather protection
    b) Door lock Switch
    c) Space heater & illumination lamp
    d) Space terminals in case of control terminals
    e)
    Glands
    Marshalling
    / Control box Included with

    64

    65

    a) weather protection
    b) Door lock Switch
    c) Space heater & illumination lamp
    d) Space terminals in case of control terminals
    e) Glands
    weight & dimensions

    i)

    Weight of
    a) Core
    b) Winding
    c) Overall Weight

    iii)

    Minimum clear height required to lift core & Winding

    44

    Tests to be performed

    to be decided during detail engg.


    Bidder to Include as per
    specification

    Bidder to specify

    Bidder to specify

    Core & Winding- 3010 Kgs. Over


    all weight :- 3850 Kgs.
    Bidder to Include mm
    Bidder to Include

    i)

    Type tests
    a) heat run test
    b) Impulse test
    c) Vacum test

    ii)

    Routine Tests

    All routine test as PER IS 2026


    shall be conducted at our unit.

    45
    46
    47
    a
    b
    c

    GA Drawing
    QAP

    Bidder to Include
    Bidder to Include

    Approximate Overall dimension (in mm)


    Overall Length
    Overall breadth
    Overall Height

    2550 mm ( Approx )
    2550 mm ( Approx )
    2375 mm ( Approx )

    48

    Approximate Weight of Heaviest package (KG)

    3850 Kgs ( Approx )

    49

    Approximate transport dimensions of largest


    package LxBxH (mm)

    ( 2550x2550x2375 ) mm Approx

    Required
    Not Required
    Required
    (for one transformer of identical
    rating)

    50
    51
    52
    53

    Fitting & Accessories as per specification


    Reference standard

    Schedule of components & Accessories indicating


    ratings,types,makes etc.
    Compliance with Technical Specification and
    Technical Procurement Specification

    YES
    IS 2026/11171
    Bidder to Include
    Bidder to Include

    KIRLOSKAR
    IS 2026,
    Part I 1977
    Part II - 1977
    Part III 1981
    Part IV 1977
    IS11171-1985
    Three phase, core type, cast
    resin dry type
    Input transformer to VFD
    for Motor
    Indoor, installed in room
    IP 23
    6.6 / 0.725 kV
    50 Hz
    3
    1000/500-500 KVA
    Copper
    Class H or Better
    Air Natural
    Delta / Star
    Dyn11d0
    Effectively earthed
    HV-Unearthed
    LV-Effectively earthed
    6.25%
    HV- Cable end box suitable
    for termination of XLPE
    aluminium cables, with air
    insulated disconnecting
    chamber
    LV- Cable end box suitable
    for termination of XLPE
    aluminium cables, with air
    insulated disconnecting
    chamber

    90C
    90C
    Within safe limit of core and
    adjacent materials

    Ratio : 500/5 A
    Class : 10P15
    OCTC
    5%
    5
    2
    2
    2.50%
    Manual
    As per IS 2026, Part III
    1981
    a) 20 KV b) 3 KV
    Shall withstand double
    voltage & double frequency
    for 60 Secs.
    a) 60 KVp b) N/A

    40 ka for 3 Seconds
    40 kA for 3 Seconds
    50 kA for 3 Sec
    240 AC
    Suitable for parallel
    operation with transformers
    of similar ratings
    As per IS 6600 1972
    0.3% of rated current
    Epoxy
    Shade 632 as per IS 5
    2.5 A/mm2 Max
    Bidder to Include
    Bidder to Include
    87.48 Amps. At HV side &
    398.17 in LV1 & 398.17 in
    LV 2
    Required

    Required
    a) 1.120 b) 3.794

    a) 2 KW ( Sub IS Tol ) b) 2.2


    KW ( Approx )
    1.0 watt/kg
    a) 10 KW ( Sub to IS Tol ) b)
    2.4 KW ( Sub to IS Tol

    a) 98.814 b) 98.994 c)
    98.108

    a) 98.522 b) 98.745 c)
    98.888
    99.114
    45%
    CRGO Silicon Steel
    1.65 Tesla
    Bidder to specify
    Electrolytic Annealed
    Copper conductor
    Fiber Glass
    CASTING MATERIAL
    CASTING MATERIAL
    Carlite
    Bidder to Specify
    a) 12 KV, 250 Amps, b)
    1KV, 1000 Amps.

    IEC standard ( 1.5 x Full


    wave)
    25 mm/KV

    Bidder to specify
    Bidder to specify
    to be decided during detail
    engg.
    Bidder to Include as per
    specification

    Bidder to specify

    Bidder to specify

    Core & Winding- 3200 Kgs.


    Over all weight :- 4200 Kgs.
    Bidder to Include mm

    ok noted

    ok noted
    Bidder to Include
    Bidder to Include
    2400 mm ( Approx )
    2775 mm ( Approx )
    2525 mm ( Approx )
    4200 Kgs ( Approx )
    ( 2400x2775x2525 ) mm Approx

    ok noted
    IS 2026/11171
    Bidder to Include
    Bidder to Include

    You might also like