Scribd
Upload
173 views4 pages

Transformer Cores, Reluctance and Permeability

The document discusses transformer cores, magnetic reluctance, and permeability. It explains that magnetic flux in a transformer core is proportional to the number of turns in a coil and the current flowing through it. The flux can also be increased by using a core material with low reluctance (high permeability), which offers little resistance to magnetic flux. Electrical and magnetic circuits are compared, with magnetic flux serving the same function as electric current. Different types of transformer cores are illustrated.

Uploaded by

UditBhardwaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views4 pages

Transformer Cores, Reluctance and Permeability

The document discusses transformer cores, magnetic reluctance, and permeability. It explains that magnetic flux in a transformer core is proportional to the number of turns in a coil and the current flowing through it. The flux can also be increased by using a core material with low reluctance (high permeability), which offers little resistance to magnetic flux. Electrical and magnetic circuits are compared, with magnetic flux serving the same function as electric current. Different types of transformer cores are illustrated.

Uploaded by

UditBhardwaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

9/3/2015

TransformerCores,ReluctanceandPermeability

Module11.2

MagneticCircuitsandTransformerCores.
MagneticFluxandAmpereTurns
Thestrengthofthemagneticfield(oramountoffluxmeasuredinWebers)inatransformercoreisdirectlyproportional
tothenumberofTURNSaroundthecoilthatisproducingthemagneticfluxwithinthecore,andtotheamountof
CURRENTflowinginthecoil.Thereforetheamountofflux,(TheGreekletterPhi)isproportionaltotheproductof
N(numberofturns)xI(thecurrentinamperes)orthe'AMPERETURNS'ofthecoil.Increasingeitherthenumberof
turnsorthecurrentinthecoilproducesanincreaseinflux.
NI

Reluctance.
Thereisathirdwaytoincreasetheflux.Thatistoimprovethemagneticpropertiesofthecorebyusingamaterialthat
hasalowReluctance(Rm),thisisthepropertyofamaterialthatisthemagneticequivalentoftheelectricalpropertyof
Resistance.Thelowerthereluctance,theeasieritisformagneticfluxtoflowthroughthecorematerial.
Materialsthatareeasilymagnetisedhavealowreluctanceandahighpermeability,andnonemagneticmaterialshave
a high reluctance and a low permeability. The opposite of Reluctance is Permeability, the magnetic equivalent of
electricalConductance.

Electrical and Magnetic Circuits


compared.
Electrical and magnetic circuits are similar in many
respects. Fig. 11.2.1 compares a simple electrical and
simplemagneticcircuit.
In the electrical circuit an emf produced by a cell or
batterydrivesacurrentaroundthecircuit,whichconsists
ofalengthofwirehavingsomeresistanceR.
Themagneticcircuitalsohasasourceofmagneticpower
intheformofacoil,suppliedwithanACcurrent.Justas
theexternalelectricalsourceiscalledanelectromotive
force, the external magnetic source is called a magneto
motiveforce(mmf),andismeasuredinampereturns.
An emf produces a current (I), which has a strength
measured in amperes in the electrical circuit in the
magnetic circuit, the mmf produces a magnetic flux,
andismeasuredinunitsofwebers(Wb).Theresistance
to the flow of magnetic flux in the core is called
Reluctance(Rm)

Fig11.2.1

Magnetic Flux linking primary and


secondarywindings.
Figure 11.2.2 shows a magnetic circuit made from a
rectangularshapedironlooporcore.Acoil(theprimary)
suppliedwithanACcurrentiswoundaroundonesideof
thecoretoprovideasourceofmmf.Ontheothersideof
thecoreaseparatecoil(thesecondary)iswound,which
supplies a measuring instrument to measure the amount
of current in the coil. The current in this coil will be
proportional to the amount of flux flowing in the core.
This arrangement therefore provides a means of
measuringmagneticflux.
http://www.learnaboutelectronics.org/ac_theory/transformers02.php

1/4

9/3/2015

TransformerCores,ReluctanceandPermeability

Fig11.2.2

http://www.learnaboutelectronics.org/ac_theory/transformers02.php

2/4

9/3/2015

TransformerCores,ReluctanceandPermeability

Fig 11.2.3 Flux is proportional to


currentandnumberofturns.
Figure 11.2.3 shows that by changing the number of
turns on the primary coil, or the current through it, a
different amount of current will flow in the secondary
coilshowingthattheflux()isproportionaltoboththe
currentandthenumberofturns.
NI

Fig11.2.3

Fig 11.2.4 Flux is also affected by


thedimensionsofthecore.
Figure11.2.4showsthatifthemmfiskeptconstant,but
thedimensionsofthecorearealteredbychangingeither
thelengthofthefluxpathoritscrosssectionalarea,the
amountoffluxflowingaroundthecorewillalsochange.

Fig11.2.4
Thereforethemeasuredflux()inthecore(andthereforethesecondarycurrent)isproportionaltothecrosssectional
areaofthecore,andinverselyproportionaltothelengthofthefluxpath:

Where:
Aisthecrosssectionalareaofthecoreand
Listhemeanlengthofthefluxpatharoundthecore.
ThemagneticcircuitalsohassomeReluctanceRm(atypeofresistancetoflux)

ReluctanceismeasuredinAmperesperWeber(A/Wb).

http://www.learnaboutelectronics.org/ac_theory/transformers02.php

3/4

9/3/2015

TransformerCores,ReluctanceandPermeability

Permeability.
Electrical resistance also depends not only on the dimensions of the conductor but also on the material of the
conductor and its resistivity. Likewise, in magnetic circuits reluctance depends not only on the length and cross
sectionalarea,butalsoonthePermeability()ofthematerial.
The higher the value for the more flux will flow and the more flux that flows, the lower must be the value of
reluctanceRm
Therefore:

SoReluctanceincreaseswiththelengthofthemagneticpath(l)anddecreasesaseitherthecrosssectionalarea(A)of
thecoreorthePermeability()ofthematerialisincreased.

RelativeandAbsolutePermeability
Permeabilityisoftenexpressedas:
=0 r
Itisnormaltofindacorematerialdescribedbyitsrelativepermeability(r),i.e.byhowmanytimestheabsolute
permeability()ofthematerialisgreaterthantheabsolutepermeabilityoffreespace(0 ).Theabsolutepermeability
offreespace0 hasavalueof4px10 7 H/m=1.256637061x10 6 H/mwhereHisinhenrysandmisinmetres.
Quoting the absolute permeability of materials used in cores would involve similarly awkward numbers. If a more
convenientfigure,therelativepermeabilityoffreespace(orair),whichwillbe1isused,theabsolutepermeabilityofa
material()willbeitsrelativepermeability(r)multipliedbytheabsolutepermeabilityoffreespace(0 ).
Thereforeisasimpleratiothatdoesnothaveanyunits,e.g.iftheofamaterialisgivenas1000,itspermeabilityis
onethousandtimesgreaterthantheabsolutepermeabilityoffreespace(orair).
The permeability of iron can be many hundreds, so having a magnetic circuit path of iron rather than air greatly
increasestheflux,whichiswhyironisacommonchoiceofmaterialforinductorandtransformercores.

Fig.11.2.5.CommonTypesofTransformerCores.
Fig11.2.5illustratessomecommonlyusedtypesofcore.
The Shell Core is an improvement of the Core type its
magnetic circuit encloses the windings more fully.
Noticethecentrelimbhastwicethecrosssectionalarea
of the outer limbs, allowing for double the flux within
theprimaryandsecondarywindings.
TheToroidalcoregivesanevenmoreefficientcoupling,
and radiates less electromagnetic energy outside the
transformer.
The magnetic circuit of the two part Pot Core, used for
smaller high frequency transformers and inductors,
totallyenclosesthewindings.

Fig11.2.5

http://www.learnaboutelectronics.org/ac_theory/transformers02.php

4/4

You might also like