Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Lenard Lianne Ass

    Uploaded by

    TheoSebastian
    This document defines and describes 10 common tools used for soldering and electronics work. It explains that a desoldering tool, also called a solder sucker, is used to remove solder and comes in plunger or bulb styles. A soldering iron supplies heat to melt solder and join workpieces, and has a heated tip and insulated handle. A soldering stand holds the hot iron safely away from the work area and has a sponge for cleaning. Long nose pliers are used for bending and cutting wire. An electric power tool is driven by a motor to machine materials.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Lenard Lianne Ass

    Uploaded by

    TheoSebastian
    11 views2 pages
    This document defines and describes 10 common tools used for soldering and electronics work. It explains that a desoldering tool, also called a solder sucker, is used to remove solder and comes in plunger or bulb styles. A soldering iron supplies heat to melt solder and join workpieces, and has a heated tip and insulated handle. A soldering stand holds the hot iron safely away from the work area and has a sponge for cleaning. Long nose pliers are used for bending and cutting wire. An electric power tool is driven by a motor to machine materials.

    Original Description:

    Lenard Lianne Ass

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document defines and describes 10 common tools used for soldering and electronics work. It explains that a desoldering tool, also called a solder sucker, is used to remove solder and comes in plunger or bulb styles. A soldering iron supplies heat to melt solder and join workpieces, and has a heated tip and insulated handle. A soldering stand holds the hot iron safely away from the work area and has a sponge for cleaning. Long nose pliers are used for bending and cutting wire. An electric power tool is driven by a motor to machine materials.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    11 views2 pages

    Lenard Lianne Ass

    Uploaded by

    TheoSebastian
    This document defines and describes 10 common tools used for soldering and electronics work. It explains that a desoldering tool, also called a solder sucker, is used to remove solder and comes in plunger or bulb styles. A soldering iron supplies heat to melt solder and join workpieces, and has a heated tip and insulated handle. A soldering stand holds the hot iron safely away from the work area and has a sponge for cleaning. Long nose pliers are used for bending and cutting wire. An electric power tool is driven by a motor to machine materials.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    TLE

    DEFINE:
    1.DESOLDERING TOOL-A typical spring-loaded solder
    sucker. A solder sucker partially dismantled showing the spring.
    A desoldering pump, colloquially known as a solder sucker, is a
    manually-operated device which is used to remove solder from a
    printed circuit board. There are two types: the plunger style and
    bulb style.

    2.SOLDERING TOOL- A soldering iron is a hand tool used

    insoldering. It supplies heat to melt solder so that it can flow into the
    joint between two workpieces. A soldering iron is composed of a
    heated metal tip and an insulated handle.

    3.SOLDERING STAND-A soldering iron stand is used to keep the


    hot soldering iron away from you and the work area. A soldering iron stand i

    made out of metal and comes with a clening sponge to clean the soldering irons
    tip.

    4.LONG NOSE PLIERS- Needle-nose pliers (also known as


    pointy-nose pliers,long-nose pliers, pinch-nose pliers or snipenose pliers) are both cutting and holding pliers used by artisans,
    jewelry designers, electricians, network engineers and other
    tradesmen to bend, re-position and cut wire.

    5.PORTABLE ELECTRIC TOOLa portable power tool that is driven by an electric motor and that is use
    d for the machining of materials. An electric power tool usuallyconsists
    of a housing and an electric motor, the rotor of which is connected to a
    spindle or mandrel by means of a sleeve or a reduction gear.
    A long rotor shaft may sometimes also serve as a spindle. In some ca
    sesfor example, in an electric planethe rotor of an inverted motor
    ,in which the stator is inside the rotor, is used as a cutter shaft. Rotary

    motion is sometimes transmitted from an electric motor to a workingm


    ember by means of a flexible shaft.

    6.PAINT BRUSH-a brush for applying paint, as one used


    in painting houses or one used in painting pictures.
    7.HACK SAW-a saw with a narrow fine-toothed blade set in a
    frame, used especially for cutting metal.
    8.SIDE-CUTTER-Diagonal pliers (or wire cutters or
    diagonal cutting pliers or diagonal cutters) are pliers intended for
    the cutting of wire(they are generally not used to grab or turn
    anything). The planedefined by the cutting edges of the jaws
    intersects the joint rivet at an angle or "on a diagonal", hence the
    name.

    9.WIRE PLIER-Diagonal pliers (or wire cutters or diagonal


    cutting pliers or diagonal cutters) are pliers intended for the cutting
    of wire (they are generally not used to grab or turn anything). The
    plane defined by the cutting edges of the jaws intersects the joint rivet
    at an angle or "on a diagonal", hence the name.

    10.MAGNIFYING-GLASS-a lens that produces an enlarged


    image, typically set in a frame with a handle and used to examine
    small or finely detailed things such as fingerprints, stamps, and fine
    print.

    You might also like