Scribd Logo
Upload

Welcome to Scribd!

  • 533 views

    MCE - 5 Published BS and BS ISO Stds

    Uploaded by

    wholenumber
    This document lists over 60 published British and International Organization for Standardization (ISO) standards related to gears that fall under the responsibility of the British Standards committee MCE/5 Gears. The standards cover topics such as gear geometry, materials, inspection, load capacity calculations, lubrication, and terminology. They provide specifications, test procedures, and recommendations for gears, gear components, and related tools and machinery. The list includes the standard number, title, and latest publication date for each standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MCE - 5 Published BS and BS ISO Stds

    Uploaded by

    wholenumber
    533 views5 pages
    This document lists over 60 published British and International Organization for Standardization (ISO) standards related to gears that fall under the responsibility of the British Standards committee MCE/5 Gears. The standards cover topics such as gear geometry, materials, inspection, load capacity calculations, lubrication, and terminology. They provide specifications, test procedures, and recommendations for gears, gear components, and related tools and machinery. The list includes the standard number, title, and latest publication date for each standard.

    Original Description:

    List of standards associated with gears

    Original Title

    MCE_5 Published BS and BS ISO Stds

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document lists over 60 published British and International Organization for Standardization (ISO) standards related to gears that fall under the responsibility of the British Standards committee MCE/5 Gears. The standards cover topics such as gear geometry, materials, inspection, load capacity calculations, lubrication, and terminology. They provide specifications, test procedures, and recommendations for gears, gear components, and related tools and machinery. The list includes the standard number, title, and latest publication date for each standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    533 views5 pages

    MCE - 5 Published BS and BS ISO Stds

    Uploaded by

    wholenumber
    This document lists over 60 published British and International Organization for Standardization (ISO) standards related to gears that fall under the responsibility of the British Standards committee MCE/5 Gears. The standards cover topics such as gear geometry, materials, inspection, load capacity calculations, lubrication, and terminology. They provide specifications, test procedures, and recommendations for gears, gear components, and related tools and machinery. The list includes the standard number, title, and latest publication date for each standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5
    At a glance
    Powered by AI
    The document lists British and ISO standards related to gears that fall under the responsibility of the MCE/5 Gears committee.

    The standards cover specifications for gear manufacturing tools, geometry, materials, load calculations, inspections, and other topics related to gears.

    The standards cover topics such as specifications for gear manufacturing tools, geometry, materials, load calculations, inspections, and other topics related to gears.

    Published BS and BS ISO Standards coming under the responsibility of BS committee MCE/5 Gears

    Title

    Latest pub.
    date

    BS 2007:1975

    Specification for circular gear shaving cutters, 1 to 8


    metric module, accuracy requirements

    1975.10.31

    BS 2059/1:1957

    Summary sheet: straight sided splines. Bottom fitting.


    1957.08.15
    Shallow

    BS 2059/2:1957

    Summary sheet: straight sided splines. Bottom fitting.


    1957.08.15
    Deep

    BS 2059/3:1957

    Summary sheet: straight sided serrations. Internal and


    1957.08.15
    external

    BS 2059:1953

    Specification for straight-sided splines and serrations

    BS 2062-1:1959

    Specification for gear hobs. Hobs for general purposes,


    1959.12.18
    1 d.p. to 20 d.p. inclusive

    BS 2062-2:1960

    Specification for gear hobs. Hobs for gears for turbine


    1960.12.23
    reduction and similar drives

    BS 2518-1:1954

    Specification for rotary form relieved gear cutters.


    Diametral pitch

    1954.11.09

    BS 2518-2:1977

    Specification for rotary form relieved gear cutters.


    Metric module

    1977.04.29

    Glossary for gears. Notation

    1976.11.30

    Number

    BS 2519-2:1976 (ISO
    701:1976)

    1953.12.31

    BS 2697:1976

    Specification for rack type gear cutters, metric module 1976.07.30

    BS 3170:1972

    Specification for flexible couplings for power


    transmission

    BS 4235-1:1972

    Specification for metric keys and keyways. Parallel and


    1972.02.22
    taper keys

    1972.03.30

    BS 4235-2:1977 (ISO
    3912-1977)

    Specification for metric keys and keyways. Woodruff


    keys and keyways

    1977.10.31

    BS 436-5:1997 (ISO
    1328-2:1997)

    Spur and helical gears. Definitions and allowable


    values of deviations relevant to radial composite
    deviations and runout information

    1997.10.15

    12 June 2014

    Published BS and BS ISO Standards coming under the responsibility of BS committee MCE/5 Gears

    BS 4506:1970

    Specification for shaft ends

    1970.01.19

    BS 4582-1:1970

    Specification for fine pitch gears (metric module).


    Involute spur and helical gears

    1970.03.27

    BS 4582-2:1978

    Specification for fine pitch gears (metric module).


    Hobs and cutters

    1978.10.31

    BS 4823:1972

    Guide to the selection of fitment bores for cylindrical


    shaft ends

    1972.07.31

    BS 5186:1975

    Specification for shaft centre heights

    1975.02.28

    BS 5246:1976

    Specification for pinion type cutters for spur gears - 1


    to 8 metric module

    1976.02.27

    Specification for straight-sided splines for cylindrical


    BS 5686:1986 (ISO 14shafts: metric nominal dimensions, tolerances and
    1982)
    gauging requirements
    BS 6168:1987

    Specification for non-metallic spur gears

    BS 6186-1:Addendum
    No. 1:1993 (ISO
    Specification for straight cylindrical involute splines:
    4156:1981/Amendment metric module, side fit. Inspection
    1:1992)
    BS 6613:1985 (ISO
    4863-1984)

    1986.08.29

    1987.03.31

    1993.03.15

    Methods for specifying characteristics of resilient shaft


    1985.07.31
    couplings

    BS 6710:1987

    Specification for dimensions of chain wheel tooth


    forming tools

    1987.02.27

    BS 721-1:1963

    Specification for worm gearing. Imperial units

    1963.04.25

    BS 721-2:1983

    Specification for worm gearing. Metric units

    1983.09.30

    BS 7676-2:1993 (ISO
    8579-2:1993)

    Acceptance code for gears. Determination of


    mechanical vibrations of gear units during acceptance 1993.08.15
    testing

    BS 7848:1996 (ISO
    10825:1995)

    Gears. Wear and damage to gear teeth. Terminology

    1996.02.15

    BS 7862:1996 (ISO
    14104:1995)

    Gears. Surface temper etch inspection after grinding

    1996.06.15

    12 June 2014

    Published BS and BS ISO Standards coming under the responsibility of BS committee MCE/5 Gears

    BS 978-1:1968

    Specification for fine pitch gears. Involute spur and


    helical gears

    1968.01.31

    BS 978-2:1952

    Specification for fine pitch gears. Cycloidal type gears

    1952.01.24

    Gears for instruments and clockwork mechanisms.


    Cycloidal type gears. Double circular arc type gears

    1959.05.15

    BS 978-3:1952

    Specification for fine pitch gears. Bevel gears

    1952.01.24

    BS EN ISO 13691:2002

    Petroleum and natural gas industries. High-speed


    special-purpose gear units

    2003.03.24

    BS ISO 1122-1:1998

    Vocabulary of gear terms. Definitions related to


    geometry

    2010.10.31

    BS ISO 14635-1:2000

    Gears. FZG test procedures. FZG test method A/8, 3/90


    2000.08.15
    for relative scruffing load-carrying capacity of oils

    BS ISO 14635-3:2005

    Gears. FZG test procedures. FZG test method A/2, 8/50


    for relative scuffing load-carrying capacity and wear
    2006.01.17
    characteristics of semifluid gear greases

    BS ISO 21771:2007

    Gears. Cylindrical involute gears and gear pairs.


    Concepts and geometry

    2007.09.28

    BS ISO 23509:2006

    Bevel and hypoid gear geometry

    2006.10.31

    BS ISO 2490:2007

    Solid (monobloc) gear hobs with tenon drive or axial


    keyway, 0,5 to 40 module. Nominal dimensions

    2007.12.31

    BS ISO 4156-1:2005

    Straight cylindrical involute splines. Metric module,


    side fit. Generalities

    2006.01.20

    BS ISO 4156-2:2005

    Straight cylindrical involute splines. Metric module,


    side fit. Dimensions

    2006.01.19

    BS ISO 4156-3:2005

    Straight cylindrical involute splines. Metric module,


    side fit. Inspection

    2006.01.23

    BS ISO 4468:2009

    Gear hobs. Accuracy requirements

    2010.01.31

    BS ISO 53:1998

    Cylindrical gears for general and heavy engineering.


    Standard basic rack tooth profile

    1998.10.15

    BS ISO 54:1996

    Cylindrical gears for general engineering and for heavy


    1997.04.15
    engineering. Modules

    BS 978-2:Addendum
    No. 1:1959

    12 June 2014

    Published BS and BS ISO Standards coming under the responsibility of BS committee MCE/5 Gears

    BS ISO 6336-1:2006

    Calculation of load capacity of spur and helical gears.


    Basic principles, introduction and general influence
    factors

    2008.09.30

    BS ISO 6336-2:2006

    Calculation of load capacity of spur and helical gears.


    Calculation of surface durability (pitting)

    2008.09.30

    BS ISO 6336-3:2006

    Calculation of load capacity of spur and helical gears.


    Calculation of tooth bending strength

    2008.09.30

    BS ISO 6336-5:2003

    Calculation of load capacity of spur and helical gears.


    Strength and quality of materials

    2003.07.04

    BS ISO 6336-6:2006

    Calculation of load capacity of spur and helical gears.


    Calculation of service life under variable load

    2007.09.28

    BS ISO 701:1998

    International gear notation. Symbols for geometrical


    data

    1999.10.15

    BS ISO 8579-1:2002

    Acceptance code for gear units. Test code for airborne


    2002.08.30
    sound

    BS ISO 9083:2001

    Calculation of load capacity of spur and helical gears.


    Application to marine gears

    2001.09.21

    BS ISO 9085:2002

    Calculation of load capacity of spur and helical gears.


    Application for industrial gears

    2002.03.25

    BS ISO TR 100641:1992

    Code of inspection practice. Inspection of


    corresponding flanks of gear teeth

    2006.11.30

    BS ISO TR 100642:1996

    Code of inspection practice. Inspection related to


    radial composite deviations, runout, tooth thickness
    and backlash

    2006.12.29

    BS ISO TR 100643:1996

    Code of inspection practice. Recommendations


    relative to gear blanks, shaft centre distance and
    parallelism of axes

    2006.11.30

    Cylindrical gears. Calculation of service life under


    BS ISO TR 10495:1997 variable load. Conditions for cylindrical gears in
    accordance with ISO 6336

    1998.05.15

    BS ISO TR 10828:1997 Worm gears. Geometry of worm profiles

    1998.05.15

    BS ISO/TR 100644:1998

    12 June 2014

    Code of inspection practice. Recommendations


    relative to surface texture and tooth contact pattern

    2006.11.30

    Published BS and BS ISO Standards coming under the responsibility of BS committee MCE/5 Gears

    checking
    BS ISO/TR 139891:2000

    Calculation of scuffing load capacity of cylindrical,


    bevel and hypoid gears. Flash temperature method

    BS ISO/TR 139892:2000

    Calculation of scuffing load capacity of cylindrical,


    2001.05.15
    bevel and hypoid gears. Integral temperature method

    BS ISO/TR 141791:2001

    Gears. Thermal capacity. Rating gear drives with


    thermal equilibrium at 95$0DC sump temperature

    2001.09.25

    BS ISO/TR 141792:2001

    Gears. Thermal capacity. Thermal load carrying


    capacity

    2001.09.21

    PD 6457:1970
    PD ISO/TR 100645:2005

    2001.05.15

    Guide to the application of addendum modification to


    1970.11.17
    involute spur and helical gears
    Code of inspection practice. Recommendations
    relative to evaluation of gear measuring instruments

    2006.11.30

    PD ISO/TR 14521:2010 Gears. Calculation of load capacity of wormgears

    2011.02.28

    PD ISO/TR 18792:2008 Lubrication of industrial gear drives

    2009.02.28

    harrya Thursday, 2014/06/12

    12 June 2014

    You might also like