Scribd
Upload
520 views5 pages

Machines Physics CXC

A machine is a device that converts one form of energy into another using mechanical advantage to allow smaller forces to overcome larger loads. Mechanical advantage is calculated as the load divided by the effort and velocity ratio is the distance moved by the effort divided by the distance moved by the load. Efficiency is the useful work done divided by the total work done. Common simple machines include levers, pulleys, inclined planes, and wheels and axles, each of which uses the mechanical interaction of effort and load to multiply force or distance.

Uploaded by

demetri lanez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
520 views5 pages

Machines Physics CXC

A machine is a device that converts one form of energy into another using mechanical advantage to allow smaller forces to overcome larger loads. Mechanical advantage is calculated as the load divided by the effort and velocity ratio is the distance moved by the effort divided by the distance moved by the load. Efficiency is the useful work done divided by the total work done. Common simple machines include levers, pulleys, inclined planes, and wheels and axles, each of which uses the mechanical interaction of effort and load to multiply force or distance.

Uploaded by

demetri lanez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

MACHINES

A machine is a device which converts energy from one form to another. A force can be applied at one
point and it can be used to overcome a force at another point.
The force being applied is called the EFFORT (E) and the force being applied is called the LOAD (L).
A machine in which the effort is needed is less than the load is called a force multiplier.
A machine in which the distance moved by the load is much greater than the distance moved by the effort
is called a distance multiplier.

EFFICIENCY, MECHANICAL ADVANTAGE (MA) & VELOCITY RATIO (VR)


(A)

Mechanical Advantage (MA) by using the following formula

LOAD

MA =

(B)

LOAD
EFFORT

MA

EFFORT

Velocity Ratio (VR) is calculated by using

VR = distance moved by the effort


distance moved by the load
(C)

Efficiency is calculated by the following formulae:

Efficiency =

useful work done 100%


total work done

Efficiency = useful work done 100%


Total work done
Efficiency = useful work done 100%
Total work done
Efficiency = useful work done 100%
Total work done
NB: Ideally the efficiency is 100%, but all machines have an efficiency less than 100%
because energy is loss to friction and heat.

LEVERS
A lever is a simple machine which uses a pivot or a fulcrum to transfer the work done by the effort to a
load. There are three types of levers.
1st ORDER LEVERS

2nd ORDER LEVERS

3rd ORDER LEVERS

PULLEYS
A pulley is a machine which is used to change the direction of a force and gain a mechanical advantage
greater than one.

A Single Fixed Pulley

A single fixed pulley is one with a fixed support which does not move. The pulley itself turns on its axis
as freely as possible for maximum efficiency.
The diagram shows that this pulley is used to change the direction of the effort (E) from a downward pull
to an upward lift. The tension in the string applies the upward force to the load (L).
It is easier to pull down on a rope than lift a load upwards.
The velocity ratio (VR) of the single fixed pulley is one (1), since the load raise the same distance the
effort moves.
The mechanical advantage (MA) is one (1) for the ideal single fixed pulley.
In reality the MA is less than one (1) because a small amount of work is wasted against friction on the
pulleys bearings and lifting the weight of the load.

Block and Tackle Pulley System


A block and tackle pulley system is a machine which has a single rope which passes around the pulleys
that are in two blocks. We can find the MA of a block and tackle pulley system by counting the number of
ropes that support the lower block.
The velocity ratio can be calculated by using:
VR = distance moved by effort
distance moved by load

Examples of Block and Tackle Pulley Systems

VR = 2

VR = 3

VR = 4

VR =5

Inclined Planes
An inclined plane is one of the simplest and most uses machines. It is a slope or a ramp which allows the
load to be raised more gradually by using a smaller effort than if the load was lifted vertically.
For example if you want to load a truck, you will find it easier to slide the cargo up a ramp than lifting it
up to the truck, since less effort is needed.

From the diagram we can determine the velocity ration (VR) and the mechanical advantage (MA)

MA = weight of the object


force needed to pull it up the incline plane

NB. The longer and more gradual the slope, the easier it is to move the object and the greater the VR will
be.

Wheel and Axle


The wheel and axle can be viewed as two pulleys of different diameters fixed to the same axle the effort
rope is placed around the larger pulley and the load rope is placed on the smaller pulley in the opposite
direction. When the effort rope is pulled the load rises. When the wheel turns once; the effort rope moves
through a distance equal to the circumference and the load moves through the circumference of the
smaller pulley.

You might also like