Upgraded Technology and Application in Die Casting
Upgraded Technology and Application in Die Casting
Upgraded Technology and Application in Die Casting
Die Casting
S.P.SHARMA, R.P.SHARMA
CREATIVE INFOCOM PVT LTD., A-12, Sector 49, Noida-201 301(UP)
www.creativecadcam.net, www.creativecadcam.com; www.indiamart.com/creativetools/
Introduction
Today in competitive world, it is difficult to run with the speed of the market, without
implementation of the new technologies in Industrial world. The whole world is coming
closer due to the regular advancement in technology. It is not a matter today that one
item is being made in western part of the world and other part in eastern part, but they
are so similar that they appear as if both parts are made under one roof. Thanks to the
technology, which has removed the differences in east and west. New technologies
are being changed and upgraded very fast, so we must be aware of this latest
technology in terms of its application and profitable use.
CAD/CAM/CAE for tool engineering is now become an essential part to keep pace
with growing technology and demand for low cost, quality, precision & faster delivery.
The followings are the few latest methods, which are being used today in die making
industry:
1. Scanning of product to be die cast.
2. CAD/CAM (Computer added design and manufacturing)
3. CAPP (computer added process planning)
4. CAI (computer added inspection)
5. 2D drawing To 3D modeling
6. 3D model to 2D drawing
7. Black-box designing (conceptual base designing)
8. Analysis & Simulation (stress, Strain, thermal analysis etc.)
9. Analysis for Gate, runner, ejector pins and cooling line etc.
10. NC data generation
11. Rapid prototyping
12. Concurrent engineering
1
Create a pattern for copy milling mechanical stylus follows the surface
contours and translates into shape directly on the die steel or electrode.
Rough milling with the help of marking & templates keeping 5~10 mm
excess machining allowance using conventional machines.
Final Milling with the help of indexing table, rotary table and other traditional
accessories.
E.D.M. using conventional electrodes for individual feature, shape and sharp
corner.
Polishing - manual operation to improve the surface finish of the die at final
stage.
Above conventional method needs skilled manpower with lot of time for hit and trial to
develop the dies. It is impossible to achieve following with conventional method due
to the limited process capabilities:
Faster development
Acceptance
CAD/CAM methodology means associated 3D modeling system to handle all the tool
design, manufacturing and analysis related activities with ease of use.
3.
In case of dies, 3D model of core, cavity and other die parts are further processed for
step-to-step working. All the features are divided in various steps to make easy
working for the operator on CNC/ conventional machines. Operators need not to
bother for many operations and their sequences. He has to perform only the operation
no. allotted to him. This way the inspection at each stage is easier, also operator will
not have a feeling of complicated machining. Complicated machining can be easily
achieved by using CNC and conventional machines, so CAPP is an important aspect
from cost, quality and time point of view of a die.
4.
Computer added inspection (CAI) could be done with the help of scanned point cloud
data. It can be used for Comparison between CAD model and scanned model of the
product, produced by a die, can be done by superimposing to illustrate the warpage,
shrinkage and dimensional behavior. This method can be used for inspection and data
storage for large dies where manual work can also be registered as CAD data for
future.
5.
2D drawing To 3D modeling
6.
3D model to 2D drawing
For normal shop floor working 2D drawing plays an important role. Creation of 2D
drawing out of 3D model is very easy with any no. of sections required to clarify the
details of the product. Software is capable enough to give any desired dimensions with
linear and geometrical tolerances.
6
7.
CAD/CAM technology is very important tool for creating the new shape and design of
the product. Aesthetics of the product can be visualised from all aspects, which saves
lot of development time of a product. Earlier, finalisation of new shape was very
laborious job. Wooden patterns were being manufactured by pattern maker, which
takes lot of time. Latest black-box designing (styling) method is described as below:
8.
Simulation is a computational algorithm, which has been developed to reduce the time
involved for the designing. Finite element analysis has been carried out for calculation
of different working conditions to optimise the material and design at the initial stage.
9.
9a.
9b.
9c.
10.
COOLING CALCULATION
NC data generation
CNC milling of core, cavity and other die parts to the final size can be done with help
of carbide cutters available in various shapes and sizes. Some time CNC machining is
required to be done on assembly of core / cavity, sliders, core inserts etc. to get better
matching. CAD/CAM software can Generate associated machining data for any CNC
machine. NC data should be made for core and cavities block of H13 / H11 material as
per following setup:
Roughing program - keeping 0.5 ~1.0 millimeter material
Semi finish program keeping 0.2 ~0.3 millimeter material
Local area program (semi finish) - keeping 0.2 ~0.3 millimeter material
Finishing program - keeping 0.02 ~0.05 millimeter material for polishing if required
We must take care of sharp corners and keep provision for electrodes. Electrode can
be used in a single stage or multi stage as per requirement.
Die components with regular shapes can be made by conventional method, up to final
shape and size and can be fitted directly to the die.
9
11.
Rapid prototyping
Rapid prototyping is a very strong tool in product development. CAD model can be
directly transferred in to a physical model in plastic, paper and copper etc.. this
physical model can be used as a part of the mechanism and various tests can be
performed to check the efficiency of the mechanism. In case some changes are
required to be done, CAD model is modified and cycle is repeated till the desired
efficiency is achieved. This is the cheapest method for any new development.
12.
Concurrent engineering
Assembly
2D drawing
CAM
CAI
NC data
3D model
Styling
CAPP
Analysis
RPT
Tool design
10
11
Conclusion
Conventional tool design practice is to make general assembly detail drawing of
tooling, which is very laborious process prone to errors. Just one error out of hundreds
of dimensions can create lot of problem and cause delay in manufacturing, so it should
be 100% correct which is possible only with the help of bi-directional associated 3D
modeling software.
This associated 3D modeling software automatically constructs following:
Associated 2D detail drawing of part
References
1. DIECASTING PRODUCT DESIGN, DIE CASTING EDUCATIONAL PROGRAMME, THE
DIECASTING SOCIETY OF INDIA, NEW DELHI.
2. S.Sekar, system manager, graphics information systems, advanced technologies for design and
manufacture by psg collage of technology, Coimbatore.
3. NEW TECHNOLOGY for die casting zinc;INTERNATIONAL LEAD ZINC RESEARCH
ORGANIZATION INC. NEW YORK, USA. DISTRIBUTED BY THE DIE CASTING SOCIETY OF
INDIA.
4. Jharna Majumdar, scientist, centre for artificial intelligence and robotics, banglore, advanced
technologies for design and manufacture by psg collage of technology, coimbatore.
5. Forging and Casting, 8th edition, vol.5, American Society for Metals.
6. UMESH R KULKARNI, DIE DRESSING FOR GRAVITY & PRESSRE DIE CASTING,
REFRESHER COURSE ON PRESSURE DIE CASTING DIES, ORGANIZED BY THE DIE
CASTING SOCIETY OF INDIA.
7. 96 India users conference proceedings of sdrc (eds)
8. 2001 India users conference proceedings of sdrc (eds)
===============================
12