Mining Truck

T 282 C
Gross Vehicle Weight (GVW): 600 t / 661 ton
Payload Class:
363 t / 400 ton
Empty Vehicle Weight (EVW): 237 t / 261 ton

Preliminary

NTB_T282C_S1.indd 1

26.03.2010 11:26:13 Uhr

T 282 C

Gross Vehicle Weight (GVW):

600 t / 661 ton

Payload Class:

363 t / 400 ton

Empty Vehicle Weight (EVW):

237 t / 261 ton

T 282 C

T282C_BT_US C_S1-5.indd 2

17.03.2010 12:13:25 Uhr

Productivity

Low Operating Cost

The Liebherr T 282 C mining truck combines a high horsepower diesel engine with an efficient AC drive system to
maximize productivity and minimize fuel consumption.

Hauling more for less is Liebherrs trademark to achieve

maximum profitability. Liebherr allows for higher output
at a lower operating cost by offering durable, yet lighter
equipment.

Reliability
The T 282 C is engineered to be strong, durable, and lightweight. This mining truck enables reduced cycle times
and offers the highest payload to empty vehicle weight
(EVW) ratio in its class.

Customer Support

Safety

Liebherr provides customers with a complete range of

services that deliver the lowest cost of ownership. The
company implements the right combination of scheduled,
preventative, and planned maintenance to allow customers to achieve availability goals.

Liebherr promotes a safe, healthy, and incident-free work

environment for both product and personnel.

Vertical Integration
Liebherr is synonymous with quality products. The new T 282 C
mining truck offers optimum reliability and availability.
This 400-ton truck utilizes the most current technologies in components and software to minimize the overall cost of ownership.

T 282 C

T282C_BT_US C_S1-5.indd 3

17.03.2010 12:13:27 Uhr

The T 282 C is a Liebherr integrated truck. The company

incorporates proprietary components in strategic areas,
specifically developed to serve the needs of the mining
industry. The vertical integration philosophy advances
supply chain coordination and facilitates the allocation of
resources according to customers needs.

IGBT Control Cabinet

The IGBT technology offers numerous
advantages for high power applications. It optimizes the performance
and efficiency of the truck, while
reducing noise level.

Front Wheels
Designed to work in conjunction with the front
suspensions, the front wheels offer superior
maneuverability and reduced tire wear.

Frame

Front Suspensions
The T 282 C features Double A-Frame front suspensions. This concept provides longer vertical wheel travel
and less strut travel, resulting in shorter suspension struts.
The Double A-Frame design contributes to the reduction
of operating costs by increasing tire life. The suspension
design eliminates side loading on the struts allowing immediate and accurate payload monitoring.

Welded steel structure with cast components in

strategic areas:
Designed according to international Institute of
Welding (IIW) fatigue guidelines
Hollow box rails with fully welded internal stiffe
Critical welds ultrasonically inspected based o
American Welding Society (AWS) D1.1
Lightweight design supports low empty
vehicle weight

T 282 C

T282C_BT_US C_S4_5.indd 4

24.03.2010 12:04:21 Uhr

Vertical Integration

Rear suspension
The quality of design attenuates loading impact
and improves ride with a 20% longer stroke and
33% reduction in internal pressure.

Axle box
Optimized vents offer great cooling capabilities. The orientation of the drag link
pins extends component life by preventing
debris accumulation.

Wheel motors

mponents in

al Institute of

nternal stiffeners
ted based on
D1.1
mpty

The AC induction motors

were specifically designed
for mining applications to
provide the highest truck
reliability.

Planetary Gear Sets

The planetary gear sets have been
utilized on Liebherr trucks since 2004.
This proven system has performed in a
variety of applications. Its efficient design
maximizes the energy transmitted into
torque and reduces mechanical losses
inside the gearbox.

T 282 C

T282C_BT_US C_S4_5.indd 5

24.03.2010 12:05:17 Uhr

Litronic Wheel Motors and Planetary Gears

The Liebherr wheel motors deliver up to
4.474 kW or 6,000 hp. Reduced drops in pressure across the motors enhance their cooling
capabilities for operation at higher altitudes or
at higher ambient temperatures. Multiple gear
ratios are available to optimize performance
for specific mining applications.

T 282 C

NTB_T282C_S6_7.indd 6

26.03.2010 11:22:33 Uhr

Productivity
The Liebherr T 282 C mining truck combines a high horsepower diesel engine with
an efficient Litronic AC drive system to maximize productivity and minimize fuel consumption.
Main components:
Diesel engine
Alternator
Litronic control box with integrated rectifier and main blower

Litronic wheel motors and planetary gears

Litronic grid box

Diesel Engine
The standard engine has two available configurations: fuel optimized and emission
optimized (complying with latest emission standards).
The efficient triple injection monitoring system on the standard engine allows CAN
Bus interface for the monitoring of fuel consumption and multiple exhaust gas temperatures.
As a safer wet engine, the diesel engine includes a water-jacketed exhaust manifold and turbo system designed to reduce engine surface temperatures below the
auto-ignition point of diesel and hydraulic fluid.
Other engine options are available up to 3.000 kW or 4,023 hp.

Alternator
The alternator is matched to the fitted engine to provide power output up to 3.000 kW
or 4,023 hp (optional engine configuration).

Litronic Control Box with Integrated Rectifier

and Main Blower
The control box consists of two power stacks per motor providing three-phase AC current to each traction motor. The control box is liquid-cooled. It outperforms air-cooled
circuits in warmer climates and higher altitudes due to its greater cooling capability.
The rectifier is located inside the pressurized control box protected from water and
dust. The main blower is engine speed independent and controlled by a liquid-cooled
frequency converter positioned in the control box. The noise and energy expended
by the blower is limited to what is needed for immediate cooling purposes. The efficiency of the blower reduces fuel consumption and increases reliability.
Litronic Grid Box

Trolley Assist

The horizontal orientation of the AC blower

motor provides better accessibility and
increases airflow.

A trolley assist package is available

upon request. Consult factory for
additional details.

This motor is powered by a liquid-cooled

frequency convertor located inside the
Litronic control box.

T 282 C

NTB_T282C_S6_7.indd 7

26.03.2010 11:22:40 Uhr

Outside
Temperature

~+
~

+25C
~
~ +77F

~ -40C
~
-40F

~
+15C
~ +59F

50C
+122F

Cabin
Temperature

Climate Control
Liebherr automatic climate control provides a
comfortable environment for operators:
Internal cabin temperature of +25 C (77 F)
can be maintained under a maximum ambient temperature of +50 C (131 F)
Internal cabin temperature of +15 C (59 F)
can be maintained under a minimum ambient
temperature of -40 C (-40 F)

T 282 C

T282C_BT_US C_S6-11.indd 8

17.03.2010 12:18:01 Uhr

Reliability
The Liebherr T 282 C is engineered to be strong, durable, and lightweight. This
mining truck enables reduced cycle times and offers the highest payload to empty
vehicle weight (EVW) ratio in its class.

Litronic IGBT Drive System

The IGBT drive system provides a smoother voltage variation which reduces
power losses in heat. The reliability of the drive system is enhanced with the use
of fewer electrical parts. The unique gate sequencing of the grid box allows an
even wear of the grid resistors.

Diagnostics
The T 282 C diagnostics system integrates all vital truck components. Engine,
drive, and truck diagnostics can be accessed via a single USB or Ethernet OPC
port. A data storage system is included and can be used for advanced diagnostics. The stored data is accessible through Wi-Fi or remotely via cellular and Low
Earth Orbit (LEO) satellites.
A 12-inch color touch screen is provided in the cab for the display of critical systems data, fault codes, and startup sequences. The T 282 C diagnostic program
detects the exact cause of each fault for greater maintainability.
The Liebherr T 282 C utilizes CAN open operator gauges instead of digital displays. In the event of individual non-vital gauge replacement, the truck is able to
continue its operation until service is completed.
Additional space and mounting brackets are available to accommodate optional
equipment, such as: dispatch systems, rearview monitor, and two-way radio.

Accessibility

Serviceability and Maintainability

Dual access to axle box via service

and maintenance doors

Individually routed fixed piping

reducing the length and number
of hydraulic hoses

AC grid blower motor accessible

through the deck
Easy access to both sides of engine
and alternator
Centralized service station conveniently located at ground level
Sampling points located at or near
ground level

Single access point for all vital

truck systems via in-dash color
touch screen
Advanced service
diagnostic tool
Lighter components
Multiple tie off points

T 282 C

T282C_BT_US C_S6-11.indd 9

17.03.2010 12:18:09 Uhr

Brake Blending
Brake Blending
Dynamic Braking*
Service Brakes**

64 km/h
40 mph

0,8 km/h
0.5 mph

The Litronic IGBT AC drive system retards the T 282 C to

an almost complete standstill of 0,8 km/h (0.5mph).
The brake blending system automatically applies the
hydraulic dry disc service brakes to bring the truck to a
complete stop.

0 km/h
0 mph

* Dynamic braking from 63 km/h (40 mph) to 0 km/h (0 mph)

** Service brake blending begins at 0,8 km/h (0.5 mph)

10

T 282 C

T282C_BT_US C_S10,11.indd 10

24.03.2010 12:06:28 Uhr

Safety
Liebherr promotes a safe, healthy, and incident-free work environment for both
product and personnel.

Cabin
The ergonomically designed wide cab offers functionality, visibility, and comfort to
the operator. The cab complies with all operator seat vibration and noise exposure
standards: vibration ISO 2631 and noise ISO 6394.
Visual and audible alarms are activated by open drivers door, when the parking
brake is not applied.
Increased operator protection is achieved with the addition of a safety plate underneath the cab. The cabin design includes an ISO 3471 compliant integrated ROPS.

Braking System
The primary braking of the truck is performed by dynamic electrical retarding. The
system is virtually wear-free, resulting in less replacement parts.
The secondary/emergency braking is performed by hydraulic dry disc brakes. The
hydraulic braking system is split into two separate circuits for front and rear with
independent accumulators for each circuit. The system allows for a 10/10/20 payload policy (*) and complies with ISO 3450 braking standard. A separate pedal for
the service brake is provided for emergency situations.

Liebherr exceeds ISO 3450

by up to 50% (**)

ISO 3450 101.6 m @

9% 1% & 50 kph
(*) Explanation about the 10/10/20 policy can be found on page 21
(**) Service brakes and retarder - actual performance depends on specific
conditions such as ground adhesion and truck speed

Slip-Slide Control

Park Brake

The Litronic IGBT drive system

offers highly advanced slip-slide
control. It utilizes a front wheel
speed sensor that prevents lock
up of rear wheels and allows for a
reliable dry disc brake blending.

The spring applied / pressure released park brake is capable

of holding a 100% loaded truck on a 15% grade.
Speed Control
Speed limits can be set for loaded, unloaded, and dump
body up conditions. These include mine-determined speed
limits, which are independent of operator input. Retard speed
control is available for downhill operation. It allows the use of
operator-set limits to maintain a safe operation.
Anti-Rollback
The anti-rollback function automatically applies the service
brakes in forward or reverse when zero speed is required on
an incline.

T 282 C

T282C_BT_US C_S10,11.indd 11

11

24.03.2010 12:06:38 Uhr

Frame

Castings in high stress areas

12

Cost Effectiveness of Braking Systems

Fail
Pass

Stopping Distance

Liebherr load-management
philosophy increases durability
and minimizes Empty Vehicle
Weight (EVW). Low EVW is
primarily achieved by utilizing
castings only in high stress
areas of the frame, such as the
integrated hoist carriage, cross
member, and dump body pivot.

ISO 3450
Retarder Dry Disc

Wet Disc Only

Retarder & Wet Disc

Low Cost per Tonne

High Cost per Tonne

T 282 C

T282C_BT_US C_12-15.indd 12

17.03.2010 12:47:07 Uhr

Low Operating Cost

Hauling more for less is Liebherrs trademark to achieve maximum profitability.
Liebherr allows for higher output at a lower operating cost by offering durable, yet
lighter equipment.

Less Fuel Consumption

The T 282 C is a fuel efficient truck. Its AC drive system is coupled with an alternator
powered by a high horsepower engine. The drive system provides continuous acceleration and retard without shifting gears.
By incorporating an efficient load management, the T 282 C requires less operating
hours to meet production targets. As a consequence, associated costs are minimized,
such as: fuel, tires, labor, spare parts, lubricants and maintenance.

Low Empty Vehicle Weight (EVW)

The new Litronic AC drive system weighs less than mechanical and old versions of AC
drives, since it requires the use of less heavy components, reducing the EVW.
The T 282 C innovative Stress Flow design requires lighter steel structures and castings, in order to handle the same forces, allowing for a more durable frame.
Cost Effectiveness of Dry vs. Wet Brake Systems

Differential Wheel Torque Control

The T 282 C utilizes dynamic electric retarding as its

primary braking system. Dry disc brakes are available for emergency situations. The air-cooled dry disc
brakes do not require additional oil, pumps, filters, and
cooling circuits to operate. Liebherr braking systems
comply with ISO 3450 standard and offer the lowest
cost per tonne.

When traveling through a curve, the drive system will

automatically adjust the torque of the rear traction
motors in order to maximize traction and minimize
tire wear during low speed handling.

T 282 C

NTB_T282C_BT_US C_S13.indd 13

13

17.03.2010 13:19:54 Uhr

On-Site Support
Liebherr provides on-site service support,
as well as training for customers maintenance groups. Training classes can be
customized to suit specific needs.

14

T 282 C

T282C_BT_US C_12-15.indd 14

17.03.2010 12:47:35 Uhr

Customer Support
Liebherr provides customers with a complete range of services that deliver the lowest
cost of ownership. The company implements the right combination of scheduled,
preventative, and planned maintenance to allow customers to achieve availability goals.

Tech. Pu
blic
a
t
ion
s

bly
m

Op
er

ng
ni

s
istic
Log

As
se

ort
upp
S
s
rt
Pa

Pla
n

ion
t
a

ng
ni

Cmpt
. Re
bu
ild

pgrade Product S
up
ct U
u
po
od
rt
r
P

ng
asti
rec
Fo

Tra
i

Trainin
g
D
ep
t.

Product Support
Liebherr product support provides the vital interface between the customer and Liebherr.
There are different levels of product support available:

Assembly
Maintenance Advice
Troubleshooting Assistance
Technical Expertise

Product support personnel work with customers from the assembly of a truck throughout its operating life. Liebherr understands the importance of proper service and support, and will be there for the life of the equipment.

Technical Publications

On-Line Support

The technical publications department

offers online and printed manuals.
Online options available upon request.

A LinkOne user-friendly, accurate,

and complete electronic parts catalog gives customers access to the
original configuration of the truck.
This publication viewing system
makes information available to
assist customers with finding the
right part, the first time, every time.

T 282 C

T282C_BT_US C_S15.indd 15

15

17.03.2010 13:24:17 Uhr

Performance Indicators
Liebherr provides key performance indicators (KPIs)
to communicate truck fleet performance
The KPIs are customized to site requirements

16

T 282 C

T282C_BT_US C_16-19.indd 16

17.03.2010 12:49:33 Uhr

Customer Support
Operator and Field Service Technician Training
The training program consists of a three-level competency-based blended training.
Level 1 - General web-based technical skills training
Level 2 - Product-specific web-based technical training
Level 3 - Product-specific hands-on troubleshooting technical training
Advantages of Liebherrs technical training strategy:

Customer focused 24/7 access to technical training (just-in-time training)

Minimizes employee time off the job
Maximizes effectiveness of classroom training time
Reduces customers overall training costs
Provides customers with mechanism for recording and tracking employee training

Parts Support and Logistics

The proactive forecasting for global fleet requirements optimizes inventories and
logistics to ensure prompt response to any parts requirements:
Continuous two-year forecasting
24/7 on-call service
Inventory planning and management
Global and real-time inventory data tracking system

Component Rebuild Program

Condition-based monitoring maximizes major component life while avoiding
unplanned failures. Rebuilds are conducted by certified repair shops using best practices, ensuring that the life and reliability of rebuilt components match new component performance expectations.

Product Upgrade Programs

The operating life of the Liebherr T 282 C can be extended and optimized by upgrading any of its systems or components as advances in technology, innovations in
design, and improvements in manufacturing techniques occur.

Forecasting Tool
Continually updates the estimated life of a major
component based on algorithm analyses of hours
at the time of replacement
Provides accurate forecasted life to ensure that a
major components spare is available when needed
Inventory planning takes in consideration the spare
parts needed for scheduled maintenance and component rebuild projects

T 282 C

T282C_BT_US C_16-19.indd 17

17

17.03.2010 12:49:36 Uhr

 Technical Data

Engine

Model __________________________
Gross horsepower @ 1,800 rpm ____
No. of cylinders __________________
Displacement ____________________
Wet weight ______________________
Crankcase _ _____________________
Cooling system __________________

MTU DD 20V4000 Tier II

2.800 kW (3,755 hp)
20
95,4 L (5,822 in)
12.020 kg (26,500 lbs)
335 L (88 gal)
758 L (200 gal)

Model __________________________
Gross horsepower @ 1,900 rpm ____
No. of cylinders __________________
Displacement ____________________
Wet weight ______________________
Crankcase _ _____________________
Cooling system __________________

MTU 20V2000 Tier II

3.000kW (4,023hp)
20
95,4 L (5,822 in)
12.020 kg (26,500 lbs)
335 L (88 gal)
758 L (200 gal)

Model __________________________
Gross horsepower @ 1,900 rpm ____
No. of cylinders __________________
Displacement ____________________
Wet weight ______________________
Crankcase _ _____________________
Cooling system __________________
Fan clutch _______________________
Air cleaners _ ____________________

Cummins QSK 78
2.610 kW (3,500 hp)
18
78 L (4,735 in)
11.300 kg (24,912 lbs)
295 L (78 gal)
721 L (191 gal)
Rockford variable speed, temperature controlled
Two units with 2 elements per unit with
restriction indicators in the cab
Mesabi
Electric
Radiator, engine and alternator, mounted
on roll out sub frame
6 x 12 Volt, (3 series of 2), 1,200 CCA each
at -18 C (0 F), 1,475 CCA at 0 C (32 F)

Radiator _ _______________________
Starter __________________________
Roll out power module ____________
Batteries ________________________

Electric Drive System

Manufacturer ____________________
Alternator _______________________
Traction motors __________________
Gear ratio _______________________
Max speed ______________________
Cooling fan ______________________

Liebherr - Litronic AC Drive System (IGBT)

AC brushless, direct drive
Litronic AC Induction Motors (2)
Standard 43.7 to 1 - haul profile
dependant
Optional 37.33 to 1 - haul profile
dependant
Standard 54 km/h / 34 mph
Optional 64 km/h / 40 mph
Electric cooling meter with twin impeller
radial fan (75 kW / 100 hp)

Tires

Rims _ __________________________
Tires ____________________________

Electric dynamic retarding with continuous rating, fan forced air over stainless
steel resistor grids with a dry disc secondary braking system.
Electric dynamic retard _ ____________ Max: 4.480 kW (6,030 hp)
Extended speed range ______________ Full retarding down to 0,8 km/h (0.5 mph).
Automatic brake blending with service
brakes down to zero
Cruise control _ ____________________ Operator adjustable and will auto retard
truck on downhill grade
Two speed over speed ______________ Automatic speed settings for empty
and loaded truck adjustable for site
requirements
Slip slide traction control ____________ Computer controlled, propel and retard,
forward and reverse, fully independent left
and right
Service brakes front ________________ Single disc, wheel speed, five calipers per
wheel
Service brakes rear _________________ Dual discs per side, one caliper per disc,
armature speed
Hydraulic accumulators _____________ 2 x 7,6 L (2 x 2 gal), separate accumulator
for front and rear axle
Park brakes _ ______________________ Spring applied, pressure released, one
caliper per each rear disc
Filtration __________________________ Cleanliness level ISO 18/16/13

Rear suspension _________________

Suspension struts ________________

18

Dump System

Two double stage, double acting hoist cylinders with inter stage and end
cushioning in both directions. Electronic joystick with full modulating control in
both extend and retract. Float function for the dump body.
Dump angle _____________________ 49 (45 with optional kick-out switch)
Cycle times _____________________ < 50 seconds
Remote dump ___________________ Quick disconnects for external power
dumping (buddy dump) accessible from
ground level
Filtration ________________________ High pressure filtration and return line
filtration. Cleanliness level ISO 18/16/13

41" x 63" bolt on rims

Michelin 56/80 R63 or Bridgestone 59/80 R63

Suspensions

Front suspension _________________

Steering

Ackermann center point lever system. Full hydraulic power steering with accumulator safety backup. Fully separate from dump hydraulic system. Two double
acting hydraulic cylinders.
Hydraulic accumulator _______________
170 L (45 gal) SAE J53
Filtration ___________________________
Cleanliness level ISO 18/16/13
Turning radius (SAE) Tire centerline* __
17,2 m (56 5)
Vehicle clearance Radius _____________
18,45m (60 6)
* This is a theoretical calculation and depends on the ground surface,
the strut length and tie rod length.

Braking Systems

Double A-frame with inclined king pin

design pivot and spindle
Three bar linkage comprised of triangular
upper link plus two bottom drag links
Nitrogen over oil with integral damping

Body

Two double stage, double acting hoist cylinders with inter stage and end
cushioning in both directions. Electronic joystick with full modulating control in
both extend and retract.

T 282 C

T282C_BT_US C_16-19.indd 18

17.03.2010 12:49:43 Uhr

 Technical Data

Frame

Weights

Design ____________________________ Closed box structure with multiple torque

tube cross members, internal stiffeners
and integrated front bumper. Steel
castings are used in stress concentration
areas.

Payload ______________________________ 363 t / 400 ton

Welding ___________________________ Frame girders welded inside and out with

ultrasonic inspection aligned with AWS D1.1

Frame capacity ** _____________________ 406 t / 447 ton

Gross Vehicle Weight (GVW)_ ___________ 600 t / 661 ton

Chassis weight * ______________________ 194 t / 214 ton
Body weight __________________________ Custom for each mine site
Weight distribution ____________________ Empty front 46 % / rear 54 %
Loaded front 33 % / rear 67 %
* depends on options fitted
** total weight of body and payload, subject to chassis weight

Operator Cab

Deluxe operator cabin with integrated ROPS and double wall design for
optimum insulation. Fully adjustable air suspension operator seat with double
lumbar support and full size second seat for training requirements. Operator
comfort controls include a tilt and telescoping steering wheel, heater, defroster
and standard AC. Real-time vital truck information is easily displayed to the
operator and also recorded for download.

Sound

Designed to meet ISO, OSHA and MSHA occupational noise criteria for truck
operator weighted sound exposure.

Fluid Capacities

Fuel tank _____________________________ 5.250 L / 1,387 gal

Hydraulic dump circuit
- Tank _ ______________________________ 1.302 L / 344 gal
- System _____________________________ 1.514 L / 400 gal
Hydraulic brake and steering
- Tank _ ______________________________ 924 L / 244 gal
- System _____________________________ 1.060 L / 280 gal
Final drives, each (2) ___________________ 280 L / 74 gal
Front wheels, each (2) _ ________________ 60 L / 16 gal
Grease tank __________________________ 90 kg / 200 lbs

Dimensions

Note: All measurements assuming unloaded using 56/80R63 tires.

T 282 C

T282C_BT_US C_16-19.indd 19

19

17.03.2010 12:50:22 Uhr

 Standard Equipment

Standard Equipment

Access ladders - 45 diagonal stair (drivers side access)

with two side ladders with flexible step
Access lights - 3 x ladder, 1 x superstructure
Accumulators - 1 steering 170 L (45 gal),
2 brakes 7,6 L (2 gal) (split front & rear brake system)
Air cleaner dust ejectors - automatic
Air cleaner indicators
Anti-roll back - in forward and reverse
Axle box - dual entry service access and rear air exhaust
Batteries - 6 x 12 V wired in series / parallel
Battery box lockouts - ground level, battery, propel and starter
Brake warning lights (cab mounted) - forward facing retard and service brake (LED)
Brakes - dynamic braking with automatic hydraulic brake blending and
emergency hydraulic service brakes
Catwalk - right and left side of engine
Centralized service station - ground level, driver side, with fuel gauge
Climate control - combined heater and air conditioner with
multiple air ducts and filtered air
Color - white / grey
Cup holder - 2 x center consol mounted
Display screen - dimmable color touch screen with operator
information and warning
Drive system - water cooled IGBT & grid box control w/ Litronic AC wheel motors
Electric starter
Electrical system - 24 VDC
Emergency stops - in-cab and ground level
Engine fan - larger diameter, low rpm with clutch
Exhaust - side mounted mufflers with insulated exhaust pipes
Fire extinguishers - 2 x hand held extinguishers
Gear assembly - Litronic gears and wheel motors
Gear ratio - 43.7 to 1
Grease system - automatic lubrication system
Grid box - resistor grid control system and variable AC grid box blower motor
Headlights (HID) - 4 x high beam, 4 x low beam
Hydraulic coolers - 1 x hoist system, 2 x final drive gear oil
Hydraulic filters - high pressure and return line brake,
steering and hoist with electronic monitoring
Mirrors - drivers side (flat), offside (convex) and access ladder (convex)

20

Mud flaps - front and rear of hydraulic and fuel tanks

Park brake - spring applied pressure release
Payload display - 2 x superstructure mounted
Power outlets - 12 VDC and 115 VAC
Power windows - driver and passenger
Pressurized cab - with fan on
Radiator - L&M (Mesabi) with header tank level gauge
Radio ready - wiring, speakers and DIN fitting
Recovery points - front and rear
Recovery system - auxiliary connectors for brake, steering and hoist buddy system
Reverse alarm
Reverse lights - 2 x axle box, 1 x drivers side superstructure
Rims - bolt on front and rear
Rock ejectors - bar type
ROPS - integrated
Seat belt - 3 point - 2 inch wide
Seats - fully adjustable driver and passenger seats with air suspension
Service access ladders - right and left engine bay ladders with cable steps
Service lights - 2 x engine bay (LED), 2 x axle box
Shut off valves - brake and steering and hoist with electronic monitoring
Sight gauges - brake, steering, hoist and radiator tanks and front wheel hub
Steering wheel - tilting and telescopic with horn
Sun visors - 2 windshield sun visors and 1 drivers door mounted blind
Systems interface - Can Open, Ethernet (OPC), Wi-Fi, USB
Tie off points - multiple personnel tie off points
Truck lights - tail, brake, retarder and indicators (LED)
Windows - tempered and tinted glass
Windshield - laminated and tinted glass
Wipers - two speed electric and intermittent with self park and dual wiper arms

T 282 C

NTB_T282C_S20.indd 20

26.03.2010 11:23:38 Uhr

 Optional Equipment Payload Policy

Optional Equipment

Payload Policy

Access ladder - retractable stair or ladder

Accumulators - MDG 15 certified
Advanced service diagnostic tool
Auxiliary low beams (HID) - 2 x bottom radiator mounted
Battery isolation - double pole with critical system bypass
Centralized service station - off driver side mounted
Cold climate - engine heater
Color - Liebherr yellow/grey
Corning lights (HID) - 2 x forward facing superstructure mounted
Dump body - liners, heated, tailgates, rock deflectors
Fire suppression system
Fog lights (HID) - 4 x bottom radiator mounted
Gear ratio - 37.33 to 1
High altitude / high cooling package
Hoist limit - 45 hoist kick out switch
Protection plates - belly pan, hydraulic tank, steering idler lower grease line
Reverse light (HID) - off drivers side superstructure
Rims - double gutter bolt on
Rise topper lights (HID) - 2 x top radiator mounted
Rock ejectors - chain type
Service access ladders - RH and LH engine bay and hydraulic tank ladders
with folder step
Service lights - 2 x rear engine bay (LED)
Sound attenuation package
Special language decals
Trolley assist
Video cameras and monitors - off side and reverse
Standard and optional equipment subject to change at manufacturers discretion.
Please contact your local representative for further information.

T 282 C

T282C_BT_US C_20-22.indd 21

21

17.03.2010 12:52:46 Uhr

The Liebherr Group of Companies

Wide product range

State-of-the-art technology

The Liebherr Group is one of the largest construction

equipment manufacturers in the world. Liebherrs highvalue products and services enjoy a high reputation in
many other fields, too. The wide range includes domestic appliances, aerospace and transportation systems,
machine tools and maritime cranes.

To provide consistent, top quality products, Liebherr

attaches great importance to each product area, its
components and core technologies. Important modules
and components are developed and manufactured inhouse, for instance the entire drive and control technology for construction equipment and mining trucks.

Exceptional customer benefit

Worldwide and independent

Every product line provides a complete range of models

in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer
a maximum of customer benefits in practical application.

Hans Liebherr founded the Liebherr family company in

1949. Since that time, the enterprise has steadily grown
to a group of more than 100 companies with over
32,000 employees located on all continents. The corporate
headquarters of the Group is Liebherr-International AG
in Bulle, Switzerland. The Liebherr family is the sole owner
of the company.

www.liebherr.us

Printed in Germany by Typodruck BK-RP LME 11003980-DD-03.10

Subject to technical modifications. Illustrations may include optional equipment and accessories.

Liebherr Mining Equipment Co.

4100 Chestnut Avenue, Newport News, VA 23607, USA
www.liebherr.us, E-Mail: [email protected]

Rueckseite
US.indd
1
T282C_BT_US
C_20-22.indd
22

ISO 9001:2000 Certified Firm

16.03.10
14:35
17.03.2010
12:52:49
Uhr