Product Brochure

Network Master Series

MT9090A
Mainframe

MU909014A1/B/B1/C/C6
MU909015A6/B/B1/C/C6
OTDR ModuleTM

1310 nm/1490 nm/1550 nm for Installation,

1625 nm & 1650 nm for Maintenance,
1310 nm/1550 nm plus 1625 nm or 1650 nm

Field Optical Testing Redefined!

MT9090A with MU909014/15 Overview
There are many handheld OTDRs on the market that appear to be a good value until they are put into action and the user quickly finds out
that they lack the performance needed to install and maintain todays networks.
The new MU909014/15 OTDR Module series for the MT9090A Network Master platform from Anritsu finally addresses this need
by providing all of the features and performance required for installation and maintenance of optical fibers in a compact, modular test
set. The MT9090A represents an unmatched level of value and ease of use, while not compromising performance. Data sampling of 2
centimeters, dead zones of 0.8-meter and dynamic range up to 38 dB ensure accurate and complete fiber evaluation of any network
type premise to access, metro to coreincluding PON-based FTTx networks featuring up to a 1 64 split.
The MT9090A with MU909014/15 module represents a new era in optical fiber testing!

Key Features
Tri-wavelength OTDR for both installation and maintenance
(1310 nm/1550 nm plus filtered 1650 nm or 1625 nm)
Built-in PON Power Meter, Loss Test Set and Light Source functions
High-end OTDR performance in a pocket-size package with unique battery operation
Fiber Visualizer mode simplifies operation, no OTDR knowledge needed
Complete PON testing through splitters up to 1 64
Bluetooth, Wi-Fi and Ethernet connectivity*
*: These features use an USB Ethernet converter, USB Wi-Fi dongle, or USB Bluetooth dongle.

Mainframe

OTDR Module

The Bluetooth wordmark and logos are owned by the Bluetooth SIG, Inc. and any use of Such marks by Anritsu is under license.

MU909014/15
OTDR ModuleTM
1310 nm/1490 nm/1550 nm for Installation,
1625 nm & 1650 nm for Maintenance,
1310 nm/1550 nm plus 1625 nm or 1650 nm
2

Product Brochure l

MU909014/15

Network Master and OTDR Module are a trademark of

Anritsu Corporation.

A Truly Revolutionary OTDR!

Introducing the first handheld OTDR that does not compromise performance the new OTDR from Anritsu. With performance that rivals
traditional OTDRs that are four times the size and more than double the price, the Network Master MT9090A OTDR has created a new
class of test instruments. It features 2 cm resolution for accurate mapping of events, dead zones of 0.8-meter (2.6-feet) and a dynamic
range of up to 38 dB enough to test over 150 km (90+ miles). The MT9090A OTDR also takes portability to a new level by being the first
handheld OTDR that truly fits in the palm of your hand.

Complete Testing Tool - Premise to Core

0.8-m Dead Zone for Short Fiber Analysis

With a dynamic range of up to 38 dB, the OTDR evolves far

beyond the premise/access applications that other handheld OTDRs
service. Metro links can be tested with lower pulsewidths which
provides greater detail and better resolution while long haul fibers up
to 175 km (108 miles) can also be completely evaluated.

With 0.8-meter dead zones, the MT9090A is perfect for evaluating

central office, FTTx and intra building cables.

FTTx and PON Ready

With splitter-based fiber-to-the-x (FTTx) deployments becoming
more popular, the need for test equipment to thoroughly test and
maintain them has risen. The OTDR series features the ability to
test up to a 1 64 split completely from end-to-end and with high
resolution.

Fast Real Time Sweeping

The MT9090A OTDR features real-time updates as quickly as 0.25
seconds. This is useful for connector and splice optimizations as
well as verifications of parameter selection.

Portable
The MT9090A OTDR takes portability to a whole new level. With
dimensions of just 19 cm 9.6 cm 4.8 cm (7.5 3.8 1.9)
and a weight of only 700 g (1.54 lbs.), the OTDR is the smallest
and lightest OTDR on the market. With its lightweight design and
user friendly dimensions, the MT9090A is perfect for the outside
plant environment and can easily be managed with one hand. The
standard soft case with shoulder strap further increases portability
when traveling from the truck to the testing site.

Bluetooth, Wi-Fi and Ethernet Connectivity

The Bluetooth feature enables you to share files between the OTDR
series and a PC. The Wi-Fi and Ethernet features enable you to
share files as well as use the remote GUI feature. You can connect
the OTDR and PC, and control the OTDR series from a browser.
Bluetooth:
- Share file folder

Easy Operation and Analysis

Fiber Visualizer (FV) is a new fault location function designed to
simplify the entire testing process. Fiber Visualizer automatically
selects the testing parameters to ensure the correct setup and
provides a simple, graphical summary of the fiber under test within
seconds. A comprehensive PDF report can then be customized and
generated, completing the testing process.

Wi-Fi and Ethernet:

- Share file folder
- Remote GUI

Modular Design
The MT9090A features a modular design allowing modules to be
easily changed in the field. Users can interchange different OTDR
modules or perform other optical network testing such as optical
channel analysis with the available CWDM channel analyzer module
or 10/100/1000 MB Ethernet testing on optical or electrical links.
Operation is quite similar between modules so the user is immediately
familiar with operation.

4.3-inch Wide Screen Display for Easy Viewing

The high resolution, full color, 4.3-inch wide screen display is the
perfect format for viewing OTDR results. It also provides excellent
readability both indoors and outdoors.

Integrated Launch Fiber

To further simplify testing, the MU909014/15 series is the only
handheld OTDR that features an integrated launch cable. A ten
meter (30 feet) fiber is built-in so initial fiber connections can be
verified without the need for additional patchcords or launch fibers.

Product Brochure l

MU909014/15

Reliable. Capable.
When buying products, you tend to choose ones that are innovative and from established companies.
When you need to install and maintain optical networks, this should also apply. With over 50 years of
combined OTDR design, Anritsu, which now includes NetTest, delivers the features that matter.
Having been in the test and measurement business for a long time, we understand the importance of
performance, portability, reliability, easy operation and of course price.

Event Table with User Defined Thresholds

PASS/FAIL thresholds for key acceptance criteria such as splice
loss, reflectance and total span loss can be set in the MT9090A
allowing technicians to easily assess a fibers condition. Failing
values are clearly highlighted in the event table alerting technicians
of potential problems.

This new function inspects the state of the connector end using
video. It can automatically inspect the end of the optical connector
for defects and scratches (The automatic pass/fail determination is
made in accordance with the IEC61300-3-35 standard.)
You can also create a PDF report on the OTDR series.

Unique Battery Operation

Since AC power is not always available where you need it,
especially at fiber pedestals, the MT9090A typically provides 8 hours
of testing on a single charge. This coupled with an optional car
cigarette lighter cord guarantees the MT9090A is ready when you
are. OTDR supports widely available NiMH and Alkaline batteries
for truly unique battery operation.

Quick Startup
The MT9090A is ready for measurement in under 15 seconds so
productive work can start immediately.

Video Inspection Probe Support

When equipped with the optional connector video inspection probe
(G0306A), the OTDR becomes a powerful tool for evaluating
connector cleanliness and quality. The G0306A can reduce issues
by verifying the condition and cleanliness of connector end faces
during the installation phase.
The G0306A has added a Pass/Fail analysis function to the
conventional VIP.

Screen Capture Function

Screen shots are sometimes useful for adding to reports so the
MT9090A features the ability to save screen shots as Bitmap images.

Functions for FTTx

One OTDR module supports FTTx installation and maintenance
(PON Power Meter, Loss Test Set, Light Source) in addition to
OTDR functions. (See page 6 for details.)

Small on price, Not on features!

1

4
5
8

1)
1 4 .3-inch high resolution, indoor/
outdoor color display
2)
 edicated function keys for
2 D
performing tasks
3)
 tart key for true one-button
3 S
testing
4)
 rrow keys for zooming, cursor
4 A
movement and menu navigation

Product Brochure l

MU909014/15

5)
5 Set to select/accept
6)
6 Menu key for easy access to
set-ups and mass storage

7 Visible laser diode1

7)
8)
8 OTDR or power meter port2
9)
 ual USB ports for quick and
9 D
easy data transfer

Top View

1: There are installation restrictions, depending on the model.

See the Ordering Information for details.

2: The number of ports is different, depending on the model.

See the Ordering Information for details.

Installation and Maintenance Simplified

Since the MT9090A is designed for technicians of any level, its hardware and user interface are optimized for simplicity. A customizable
testing sequence and Full Auto mode automates testing and guides novice users. Specialized maintenance wavelengths are also available
to eliminate equipment damage and transmission interruptions.

Installation Simplified

Maintenance Simplified

The MU909014/15 OTDR Module series provides easy and accurate

verification of fiber installations at 1310 nm, 1490 nm and 1550 nm
to ensure your network is ready for any transmission type. The user
simply connects the fiber, selects Full Auto and presses Start - all
settings are automatically selected to ensure accurate and constant
results for any skill level. Upon completion, all key fiber characteristics
are displayed within seconds. Experienced users can also fine tune all
testing parameters and make manual measurements.

Being able to test active fibers is a key requirement for network

maintenance since multiple users often share portions of the
network and taking them all out of service is not an option. To
address this need, special modules are available in the MT9090A
OTDR series. 1650 nm is recommended by the ITU-T L.41 for
active maintenance since it features 100 nm of isolation from the
nearest 1550 nm transmission wavelength. The 1650 nm OTDR also
features an integrated filter to block transmissions from damaging
the OTDR. 1625 nm is also available and can be used for in-service
testing or as an extra test to verify installation for stresses such as
macrobends.

Step 1 Connect fiber and Power on

Step 2 Select Full Auto and Press Start
All testing parameters are automatically selected.

Added Macro Bending analysis function:

The OTDR series finds macro bending points by comparing data

from two traces: one 1310 nm and the other 1550 nm.

1310 nm

: The screen items depend on the selected module.

1550 nm

Step 3 Read Results

Test results including all splices and connectors, as well as total
fiber length and loss are shown in an easy to read table.

Network Documentation Simplified

Simple Data Storage
With internal data storage plus support for external USB memory
devices, the MT9090A is more than capable. Add to this auto file
saving and naming for easy, error-free documenting of your network.

Common OTDR Data Format

The MT9090A supports the universal Telcordia SR-4731 format
making it compatible with not only legacy Anritsu and NetTest
products, but with many other vendors data.

Step 4 View Trace

Free and Simple Software Upgrades

View trace if desired to see the complete fiber trace and make any
manual measurements.

Firmware upgrades are easily performed via USB and available from
the Anritsu website for registered users or through Anritsu customer
support.

Product Brochure l

MU909014/15

All-in-one FTTx Installation and Maintenance Functions

There are three types of OTDR module: single wavelength (1625 nm or
1650 nm) for the FTTx maintenance market including Metro networks, dual
wavelength (1310 nm/1550 nm) for the installation market, and triple wavelength
for both these markets.
These all-in-one OTDR modules support every function required at fiber
installation and maintenance, as well as OTDR functions. The PON Power
Meter and Power Meter are ideal for loss measurements required for quality
measurements and basic fault tests.

PON Power Meter (1490 nm/1550 nm)

Loss Test Set

Generally, PON communications use three wavelengths: 1310 nm,

1490 nm, and 1550 nm. Data (1490 nm) and video (1550 nm) signals
are sent to subscribers through one optical fiber but a generalpurpose optical power meter cannot separate the two wavelengths,
making it difficult to locate faults using optical level measurements.
The PON Power Meter can identify and measure the two 1490 nm
and 1550 nm signals to support PASS/FAIL evaluations based on a
set threshold and reference value. Additionally, power measurements
and OTDR tests are quick and easy without changing the optical fiber
because the PON Power Meter port is shared with the OTDR function.

Combining the OTDR module light source with the Power Meter
supports use as a Loss Test Set.
The loss at both 1310 nm and 1550 nm can be measured with one
OTDR by looping-back the optical fiber. And both modulation (270 Hz,
1 kHz, 2 kHz) and CW signals are supported. Just setting the threshold
and reference value makes PASS/FAIL evaluation easy.

DCFL Function

Light Source/Power Meter

The OTDR module can be used as a light source to identify an
optical fiber and measure the loss by connecting an optical fiber
identifier and optical power meter at the other end of the fiber.
Since all wavelengths are shared by one OTDR port, the fiber
identification, loss, and OTDR measurements can all be performed
as a single task without changing the fiber connection. Both
modulation (270 Hz, 1 kHz, 2 kHz) and CW signals are supported.
The simple power meter function is ideal for checking optical levels
to confirm a fault occurrence using total received power. Setting a
threshold and reference value makes PASS/FAIL evaluation easy
too. In addition, power measurements and OTDR tests are quick
and easy without changing the optical fiber, because the Power
Meter port is shared with the OTDR.

The Drop Cable Fault Locate (DCFL) mode is a useful function to

investigate faults occurring in a drop cable. It consists of the Power
Meter function and OTDR function, so you are not required to switch
measuring instruments or applications.

*: DCFL mode depend on the selected module

Visible Laser Diode

The optional visible red LD light source makes it easy to spot faults
in splices and connectors and well as to manage fibers.

: The PON Power Meter, Light Source, Power Meter, Loss Test Set, and Visible
Laser Diode functions have different menus, depending on the selected
module. See the Ordering Information for details.
: The Visible Laser Diode is operated from the OTDR and Power Meter menus.
: The screen items depend on the selected module.

Product Brochure l

MU909014/15

Specifications
MT9090A Mainframe
190 (W) 96 (H) 48 (D) mm (7.5 3.8 1.9) (including Mainframe and Module)
<700 g (1.54 lbs.) (including Mainframe, Module and Standard battery)
4.3-inch TFT Color LCD (480 272 pixels, Transmissive)
USB 1.1, Type A 1 (memory), Type B 1 (USB mass storage)

Dimensions and Mass

Display
Interface

OTDR Module Common (MU909014C/C6, MU909015C/C6, MU909014A1/B/B1 and MU909015B/B1, MU909015A6)

Fiber Type
Optical Connector
Distance Range
Pulse Width
Linearity
Return Loss Measurement Accuracy1
Distance Measurement Accuracy
Data Storage
IOR Setting
Units

Other Functions

Language
Power Supply
Fiber Event Analysis
Loss Measurement Modes
OTDR Trace Format
Battery
EMC

10 m/125 m SMF (ITU-T G.652)

FC/SC/DIN adapter are changeable
0.5, 1, 2.5, 5, 10, 25, 50, 75, 125, 250 km (IOR=1.500000)
5, 10, 20, 50, 100, 200, 500 ns, 1, 2, 5, 10, 20 s
Which ever is greater 0.05 dB/dB or 0.1 dB
2 dB
1 m 3 Measurement distance 105 Marker resolution (excluding IOR uncertainty)
Internal memory: 40 MB (<1,000 traces)
External (USB Memory): 1 GB (<30,000 traces)
1.3000 to 1.7000 (0.0001 steps)
km, m, kft, ft, mi
Integrated launch fiber: 10 m (30 ft)
Connection check: Automatic check of OTDR to FUT connection quality
Live fiber detect: Verifies presence of communication light in fiber
Real time sweep: <1 sec (typ.)
Macro bend analysis (without single-wavelength model)
Bluetooth, Wi-Fi and Ethernet connectivity
Fiber Visualizer (FV) function
DCFL function (differs with selected module)
Password protect function
Video inspection probe (option)
User selectable (English, Simplified Chinese, Traditional Chinese, Korean, Japanese, French, German, Italian, Spanish, Polish,
Portuguese, Finnish, Danish, Swedish, Spanish (Latin America), Russian and Dutch)
9 V(dc), 100 V(ac) to 240 V(ac), Allowable Input voltage range: 90 V(ac) to 264 V(ac), 50 Hz/60 Hz
Automatic, Displayed in table format based on user defined PASS/FAIL thresholds
2-point loss, Splice loss, dB/km Loss LSA, ORL, Event
Telcordia universal (.SOR) issue 2 (SR-4731)
NiMH (Standard battery), NiMH (AA Type), Alkaline Dry Battery (AA Type)2
Operating time (Standard battery): 8 hours (typ.)3, Telcordia GR-196-CORE Issue2, September 2010
Recharging time: <4 hours (typ.)4
EN61326-1, EN61000-3-2

MU909014C/C6 and MU909015C/C6 OTDR Module

Model Name
Center Wavelength5
Dynamic Range7, 8

PW = 20 s
PW = 500 ns

Dead Zone12
(IOR = 1.500000)
Number of Sampling Points13
Sampling Resolution
Testing Modes
Power Meter
PON Power Meter
(only for MU909015C6/14C6)
Light Source
(only for MU909015C6/14C6)
Loss Test Set
(only for MU909015C6/14C6)
Environment
Laser Safety14

MU909015C/C6-057
MU909015C/C6-058
MU909015C/C6-059
MU909014C/C6-057
MU909014C/C6-058
MU909015C/C6-067
MU909015C/C6-068
MU909015C/C6-069
MU909014C/C6-067
MU909014C/C6-068
1310/1550 20 nm6
1310/1550 20 nm6
1310/1550 20 nm6
1310/1550 20 nm6
1310/1490/1550 20 nm6
1625 15 nm
1650 15 nm
1625 15 nm
1650 15 nm
38 dB/37 dB/35 dB9, 10
38 dB/37 dB/35 dB9, 10
36 dB/35 dB/35 dB
32.5 dB/31 dB/32.5 dB9, 11 32.5 dB/31 dB/32.5 dB9, 11
27 dB/26 dB/25 dB9, 10
27 dB/26 dB/24 dB9, 10
25 dB/24 dB/24 dB
24.5 dB/23 dB/24 dB9, 11 24.5 dB/23 dB/24 dB9, 11
Fresnel: 0.8 m (Typical)
Backscatter: 4.0 m (1310 nm, Typical), 4.5 m (1490/1550/1625/1650 nm, Typical)
<250,001 pts (Course: <7,501 pts, Medium: <20,001 pts, Fine: <250,001 pts)
2 cm (min.)
OTDR (Full automatic, Manual, Real time), Power Meter, [Video Inspection Probe (Option)]
[PON Power Meter, Loss Test Set, Light Source (MU909015C6, MU909014C6)]
Please refer to the spec Power Meter
Please refer to the spec PON Power Meter
Please refer to the spec Light Source
Please refer to the spec Loss Test Set
Operating temperature and humidity: 10 to +50C, <95% (no condensation)
Storage temperature and humidity: 30 to +70C, <95% (no condensation)
Vibration: MIL-T-28800E Class 3, Dust and Drip proof: IP51
IEC Pub 60825-1: 2007 Class 1M, 21CFR1040.10

Product Brochure l

MU909014/15

MU909014A1/B/B1 and MU909015B/B1 OTDR Module

Model name
Center Wavelength5
Dynamic Range7, 8

PW = 20 s
PW = 500 ns

Dead Zone12
(IOR = 1.500000)
Number of Sampling Points13
Sampling Resolution
Testing Modes
Power Meter
(only for MU909014B/B1/15B/15B1)
Visible Fault Locator
(only for MU909014A1/B1/15B1)

Environment
Laser Safety14

MU909015B/B1-056
MU909014B/B1-056
MU909014A1-053
MU909014A1-054
MU909015B/B1-066
MU909014B/B1-066
MU909014A1-063
MU909014A1-064
1310/1550 20 nm6
1625 15 nm
1650 15 nm
37 dB/36 dB
32.5 dB/31 dB
32.5 dB9, 11
28 dB/26 dB
24.5 dB/23 dB
24.5 dB9, 11
24 dB9, 11
Fresnel: 1 m
Backscatter: 5 m
<125,001 pts (Course: <6,251 pts, Medium: <25,001 pts, Fine: <125,001 pts)
5 cm (min.)
OTDR (Full automatic, Manual, Real time), Power Meter, [Visible Fault Locator (Option)], [Video Inspection Prove (Option)]
Please refer to the spec Power Meter

Not applicable

Connector: 2.5 mm universal

Wavelength: 650 15 nm (CW, +25C)
Output power: 0 3 dBm (CW, +25C)
Modulation: CW, 1 Hz
Operating temperature and humidity: 5 to +40C, <80% (no condensation)
Storage temperature and humidity: 20 to +60C, <80% (no condensation)
Vibration: MIL-T-28800E Class 3, Dust and Drip proof: IP51
IEC Pub 60825-1: 2007 Class 1, IEC Pub 60825-1: 2007 Class 1M, IEC Pub 60825-1: 2007 Class 3R (VLD Option),
21CFR1040.10

MU909015A6 OTDR Module

Model Name
Center Wavelength5
Dynamic Range7, 8

PW = 20 s
PW = 500 ns

Dead Zone12
(IOR = 1.500000)
Number of Sampling Points13
Sampling Resolution
Testing Modes
Power Meter
PON Power Meter
Light Source
Environment
Laser Safety14

MU909015A6-053
MU909015A6-063
1625 15 nm

MU909015A6-054
MU909015A6-064
1650 15 nm
35 dB9, 10

25 dB9, 10

24 dB9, 10

Fresnel: 0.8 m (Typical)

Backscatter: 4.5 m (Typical)
<250,001 pts (Course: <7,501 pts, Medium: <20,001 pts, Fine: <250,001 pts)
2 cm (min.)
OTDR (Full automatic, Manual, Real time), Power Meter, [Video Inspection Probe (Option)]
[PON Power Meter, Light Source]
Please refer to the spec Power Meter
Please refer to the spec PON Power Meter
Please refer to the spec Light Source
Operating temperature and humidity: 10 to +50C, <95% (no condensation)
Storage temperature and humidity: 30 to +70C, <95% (no condensation)
Vibration: MIL-T-28800E Class 3, Dust and Drip proof: IP51
IEC Pub 60825-1: 2007 Class 1, 21CFR1040.10

1: Design assurance. Distance range: 25 km, Pulse width: 2 s, 20 km open the

fiber-end. BSC: 78.5 (1310 nm), 80.1(1490 nm), 81.5 (1550 nm),
82.5 (1625 nm/1650 nm)
2: All specifications are guaranteed by standard battery.
3: Back light low, Sweeping halted, +25C
4: +10 to +30C, Power off
5: At +25C, 1 s, except charging battery
6: Typical value, 25 nm is Guaranteed
7: Typical value, Distance range: 125 km, Averaging: 180 sec, SNR=1, +25C,
Except while charging battery, Subtract 1 dB for guarantee
8: Dynamic range (one-way back-scattered light)
SNR=1: The level difference between the RMS nose level and the level where
near end back-scattering occurs.

9: 1490 nm/1550 nm cut filter included (1625 nm or 1650 nm port)

10: Specified without background light (1625 nm, 1650 nm)
11: In service Signal is 20 dBm (CW) at 1310 nm/1550 nm
12: Return Loss 45 dB, +25C
Fresnel: PW=5 ns, 1.5 dB down from the peak of Fresnel
Backscatter: PW=5 ns, Deviation 0.5 dB

13: Either medium and fine density value is selected depends on distance range
14: Safety measures for laser products
This option complies with optical safety standards, in Class1, 1M, 3R of
IEC 60825-1; the following descriptive labels are affixed to the product.

Product Brochure l

MU909014/15

Other Functions
Light Source
Models
Wavelength15
Fiber Type
Output port
Output power15, 16
Output stability17
Modes of Operation
Laser Safety

MU909015C6/14C6, MU909015A6
1310/1550 25 nm (MU909015C6/14C6)
1490 25 nm (MU909015C6-059, MU909015C6-069)
1625 25 nm (MU909015C6/14C6-057, MU909015A6-053, MU909015C6/14C6-067, MU909015A6-063)
1650 25 nm (MU909015C6/14C6-058, MU909015A6-054, MU909015C6/14C6-068, MU909015A6-064)
10 m/125 m SMF (ITU-T G.652)
Shared with OTDR port
5 1.5 dBm
0.2 dB
CW, 270 Hz, 1 kHz, 2 kHz
Same as OTDR

Power Meter
Models
Setting Wavelength
Fiber Type
Measurement range18
Measurement port
Measurement Accuracy19
Modes of Operation

MU909015C6/14C6, MU909015A6
1310/1490/1550/1625/1650 nm
10 m/125 m SMF (ITU-T G.652)
50 to +26 dBm (CW)
40 to +13 dBm (270 Hz, 1 kHz, 2 kHz)
Shared with OTDR port
1625 nm or 1650 nm OTDR port
Dedicated port (Options 059 and 069)
0.5 dB
CW, 270 Hz, 1 kHz, 2 kHz

MU909015C/14C
1310/1490/1550 nm

MU909015B/B1, MU909014B/B1
1310/1490/1550/1625/1650 nm

50 to 5 dBm (CW)
Shared with OTDR port
1310 nm/1550 nm OTDR port (Except options 059 and 069)
1310 nm/1490 nm/1550 nm OTDR port (Options 059 and 069)
CW

PON Power Meter (1490 nm/1550 nm)

Models
Wavelength
Fiber Type
Measurement range
Measurement port
Measurement Accuracy20
Isolation21

MU909015C6/14C6, MU909015A6
1490 nm/1550 nm
10 m/125 m SMF (ITU-T G.652)
50 to +13 dBm (1490 nm, CW)
50 to +26 dBm (1550 nm, CW)
Shared with OTDR port (1625 nm or 1650 nm)
Dedicated port (Options 059 and 069)
0.5 dB
1490 nm: >35 dB, 1550 nm: >50 dB

Loss Test Set

Models
Fiber Type

Measurement port

Wavelength
Output Power15, 16
Output stability17
Modes of Operation
Laser Safety
Setting Wavelength
Measurement range18
Measurement Accuracy19
Modes of Operation

MU909015C6/14C6
10 m/125 m SMF (ITU-T G.652)
Light Source: Shared with OTDR port
1310 nm/1550 nm OTDR port (Except options 059 and 069)
1310 nm/1490 nm/1550 nm OTDR port (Options 059 and 069)
Power Meter: Shared with OTDR port
1625 nm or 1650 nm OTDR port (Except options 059 and 069)
Dedicated port (Options 059 and 069)
Light Source
1310 25 nm, 1550 25 nm (Except options 059 and 069)
1310 25 nm, 1490 25 nm, 1550 25 nm (Options 059 and 069)
5 1.5 dBm (CW, 25C)
0.2 dB
CW, 270 Hz, 1 kHz, 2 kHz
Same as OTDR
Power Meter
1310/1490/1550/1625/1650 nm
50 to +26 dBm (CW)
40 to +13 dBm (270 Hz, 1 kHz, 2 kHz)
0.5 dB
CW, 270 Hz, 1 kHz, 2 kHz

15: At +25C, CW
16: Fiber length 2 m, after the warm-up.
17: Wavelength 1310 nm/1550 nm, CW, 1C at one point within 10 to +50C, deference between the largest value and shortest value for one minute, single mode fiber
2 m, when the optical power meter with return loss of 40 dB or more is used. After the warm-up time (10 minutes) passed.

18: At 1550 nm
19: 1310 nm/1490 nm/1550 nm, CW, 20 dBm, 25C, on master connector fiber (FC) use, after zero offset execution.
20: 1490 nm/1550 nm, CW, 20 dBm, +25C, on master connector fiber (FC) use, after zero offset execution.
21: Design assurance.

Product Brochure l

MU909014/15

Ordering Information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.

1) Select Mainframe
Includes battery pack, AC charger/adapter, standard soft case, strap and protector.
Model/Order No.
MT9090A

Description
Mainframe (with color LCD)

2) Select Base Module

Model/Order No.
MU909014A11
MU909015A62
MU909014B1
MU909014B11
MU909015B1
MU909015B11
MU909014C4
MU909014C64
MU909015C3, 4
MU909015C64, 5

Description
OTDR (Single wavelength, 30 dB class OTDR with VLD)
OTDR (Single wavelength, 35 dB class OTDR with PM, PON-PM and LS)
OTDR (2-wavelength, 30 dB class OTDR)
OTDR (2-wavelength, 30 dB class OTDR with VLD)
OTDR (2-wavelength, 35 dB class OTDR)
OTDR (2-wavelength, 35 dB class OTDR with VLD)
OTDR (3-wavelength, 30 dB class OTDR)
OTDR (3-wavelength, 30 dB class OTDR with PM, PON-PM, LTS and LS)
OTDR (3-wavelength, 35 dB class OTDR)
OTDR (3-wavelength, 35 dB class OTDR with PM, PON-PM, LTS and LS)

1: One OTDR port (any of 1310 nm/1550 nm, 1625 nm, 1650 nm) and visible light source (option) (Fig. 1)
2: One OTDR port (1625 nm or 1650 nm) (Fig. 2)
3: One OTDR port (1310 nm/1490 nm/1550 nm; Options 059 and 069) (Fig. 2)
4: Two OTDR ports (1310 nm/1550 nm, and 1625 nm or 1650 nm; Except options 059 and 069) (Fig. 3)
5: One OTDR port and dedicated power meter port (1310 nm/1490 nm/1550 nm, and power meter; Options 059 and 069) (Fig. 3)

Fig. 1

Fig. 2

Fig. 3

3) Select Module, Connector Interface and Testing Options

Includes operation manual and quick reference guide.
Model/Order No.
UPC type
APC type
MU909014C-057
MU909014C-067
MU909014C-058
MU909014C-068
MU909015C-057
MU909015C-067
MU909015C-058
MU909015C-068
MU909015C-059
MU909015C-069
MU909014C6-057 MU909014C6-067
MU909014C6-058 MU909014C6-068
MU909015C6-057 MU909015C6-067
MU909015C6-058 MU909015C6-068
MU909015C6-059 MU909015C6-069
UPC type
APC type
MU909014B-056
MU909014B-066
MU909014B1-056 MU909014B1-066
MU909015B-056
MU909015B-066
MU909015B1-056 MU909015B1-066
UPC type
APC type
MU909014A1-053 MU909014A1-063
MU909014A1-054 MU909014A1-064
MU909015A6-053 MU909015A6-063
MU909015A6-054 MU909015A6-064

PM
PON-PM
LTS
Installation and Maintenance Models
OTDR (1310/1550/1625 nm, 32.5/31/32.5 dB)
1
OTDR (1310/1550/1650 nm, 32.5/31/32.5 dB)
1
OTDR (1310/1550/1625 nm, 38/37/35 dB)
1
OTDR (1310/1550/1650 nm, 38/37/35 dB)
1
OTDR (1310/1490/1550 nm, 36/35/35 dB)
1
OTDR (1310/1550/1625 nm, 32.5/31/32.5 dB)
3
5
1
OTDR (1310/1550/1650 nm, 32.5/31/32.5 dB)
3
5
1
OTDR (1310/1550/1625 nm, 38/37/35 dB)
3
5
1

1
3
OTDR (1310/1550/1650 nm, 38/37/35 dB)

OTDR (1310/1490/1550 nm, 36/35/35 dB)

4
6
2
General Purpose Models
OTDR (1310/1550 nm, 32.5/31 dB)
1
OTDR (1310/1550 nm, 32.5/31 dB)
1
OTDR (1310/1550 nm, 37/36 dB)
1
OTDR (1310/1550 nm, 37/36 dB)
1
Maintenance Models
OTDR (1625 nm, 32.5 dB)
OTDR (1650 nm, 32.5 dB)
OTDR (1625 nm, 35 dB)
3
1
OTDR (1650 nm, 35 dB)
3
1
Description

1: PM (Power Meter) function shared with OTDR port.

2: Dedicated PM port.
3: PON-PM (PON Power Meter) shared with 1625 nm or 1650 nm OTDR port.

LS7

OTDR or Power Meter.

Identifies and measures 1490 nm and 1550 nm wavelengths.

PON-PM port. Identifies and measures 1490 nm and 1550 nm
wavelengths.
5: LTS (Loss Test Set) function for measuring 1310/1550 nm wavelengths. Light
source shared with 1310/1550 nm OTDR port. Power meter shared with 1625 nm
or 1650 nm OTDR port.
6: LTS function for measuring 1310/1490/1550 nm wavelengths. Light source
shared with 1310/1490/1550 nm OTDR port. Power meter is dedicated port.
7: LS (Stabilized Light Source) shared with OTDR port for each wavelength.

Top Menu differs with selected module

Product Brochure l

MU909014/15

FV

DCFL

8: VLD (Visible Laser Diode) function with visible light source port operated from

4: Dedicated

10

VLD8

4) Select Connector Adapter

Adapter included at no charge must be added as a separate line item.
Model/Order No.
MU909014A/B/C-025
MU909015A/B/C-025
MU909014A/B/C-026
MU909015A/B/C-026
MU909014A/B/C-037
MU909015A/B/C-037
MU909014A/B/C-039
MU909015A/B/C-039
MU909014A/B/C-040
MU909015A/B/C-040

Description
FC-APC Connector key width 2.0 mm
(APC: Models -063, 064, 066, 067, 068, and 069)
SC-APC Connector
(APC: Models -063, 064, 066, 067, 068, and 069)
FC Connector
(UPC: Models -053, 054, 056, 057, 058, and 059)
DIN 47256 Connector
(UPC: Models -053, 054, 056, 057, 058, and 059)
SC Connector
(UPC: Models -053, 054, 056, 057, 058, and 059)

B0601B Standard Soft Case

This standard accessory
accommodates the mainframe with
fitted protector.

5) Select Accessories

B0602A Deluxe Soft Case

Full Network Master operation without
removal from the case.
Provides excellent protection for use in
hash conditions.
This does not accommodate the
mainframe if the protector is fitted.

Must be added as separate line items.

Model/Order No.
Z1580A1
B0663A2
G0203A
G0202A
B0602A
B0601B
B0600B
Z1023A
J1402A
J1530A
J1531A
J1532A
J1533A
J1534A
J1535A
W3585AE
W3586AE
Z1579A
G0306A
OPTION-545VIP
Networks

Description
Protector & Soft Case
Protector
AC Adapter (for Replacement)
NiMH battery pack (for Replacement)
Deluxe Soft Case (for MT9090A)
Standard Soft Case
Hard Case (for MT9090A)
Strap
Car Plug Cord
SC Plug-in Converter (UPC(P)-APC(J))
SC Plug-in Converter (APC(P)-UPC(J))
FC Plug-in Converter (UPC(P)-APC(J))
FC Plug-in Converter (APC(P)-UPC(J))
LC-SC Plug-in Converter (for SM, SC(P)-LC(J))
LC-SC Plug-in Converter (for MM, SC(P)-LC(J))
Quick Reference Guide (English, Printed)
Operation Manual (English, Printed)
Operation Manual
(English and Japanese, Electronic (CD-R))
Video Inspection Probe ( 400)
Video Inspection Probe ( 200, 400)
PC Emulation Software for Data Analysis and Reporting

1: The protector (B0663A) and standard soft case (B0601B) from a set.

B0600B Hard Case

This accommodates two mainframes (with or without fitted protector), accessories
(light source or power meter, backup battery, fiber cleaner, etc.).

Mainframe with Protector

B0663A Protector
The mainframe with fitted protector.

The protector includes a shoulder strap.

2: The shoulder strap can be used to hang the instrument around the neck while
working.

6) Replacement Adaptors
Must be added as separate line items.
Model/Order No.
J0617B
J0618E
J0619B
J0739A

Description
FC (UPC: Models -053, -054, -056, -057, -058)
DIN (UPC: Models -053, -054, -056, -057, -058)
Replaceable Optical Connector SC
(UPC: Models -053, -054, -056, -057, -058)
(APC: Models -063, -064, -066, -067, -068)
FC (APC: Models -063, -064, -066, -067, -068)

J1530A to J1535A
Plug-in Converter
(The photo shows the J1534A)

OPTION-545VIP
Video Inspection Probe
( 200, 400)

G0306A
Video Inspection Probe ( 400)

Product Brochure l

MU909014/15

11

CMA5 Series

MT9090 Series

For Optical Fiber Installation and Maintenance.

MU909011A Fault Locator Module

Compact fault locator instrument for an easy and accurate verification of drop
cable installation.

MU909020A OCA Module

Compact CWDM channel analyzer to verify power levels, drift and channel
presence of CWDM networks.

MU909060A GigE Module

Dedicated field test solution for installation and troubleshooting Ethernet links
in the access network.

MT9083 Series ACCESS Master Mini-OTDR

All-in-one test tool for fiber construction and maintenance.

MU909011A

MU909020A

MU909060A

Specifications are subject to change without notice.

United States

Italy

Singapore

1155 East Collins Blvd., Suite 100, Richardson,

TX 75081, U.S.A.
Toll Free: 1-800-267-4878
Phone: +1-972-644-1777
Fax: +1-972-671-1877

Via Elio Vittorini 129, 00144 Roma, Italy

Phone: +39-6-509-9711
Fax: +39-6-502-2425

11 Chang Charn Road, #04-01, Shriro House

Singapore 159640
Phone: +65-6282-2400
Fax: +65-6282-2533

Anritsu Company

Canada

Anritsu Electronics Ltd.

700 Silver Seven Road, Suite 120, Kanata,

Ontario K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006

Anritsu S.r.l.

Anritsu Pte. Ltd.

Sweden

Anritsu AB

Kistagngen 20B, 164 40 KISTA, Sweden

Phone: +46-8-534-707-00
Fax: +46-8-534-707-30

Finland

Anritsu AB

Brazil

Teknobulevardi 3-5, FI-01530 VANTAA, Finland

Phone: +358-20-741-8100
Fax: +358-20-741-8111

Praa Amadeu Amaral, 27 - 1 Andar

01327-010 - Bela Vista - So Paulo - SP - Brazil
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940

Denmark

Anritsu Eletrnica Ltda.

Mexico

Anritsu Company, S.A. de C.V.

Av. Ejrcito Nacional No. 579 Piso 9, Col. Granada

11520 Mxico, D.F., Mxico
Phone: +52-55-1101-2370
Fax: +52-55-5254-3147

United Kingdom

Anritsu EMEA Ltd.

200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.

Phone: +44-1582-433200
Fax: +44-1582-731303

France
Anritsu S.A.
12 avenue du Qubec, Btiment Iris 1- Silic 612,
91140 VILLEBON SUR YVETTE, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65

Anritsu A/S

Kay Fiskers Plads 9, 2300 Copenhagen S, Denmark

Phone: +45-7211-2200
Fax: +45-7211-2210

Russia

Anritsu EMEA Ltd.

Representation Office in Russia

Tverskaya str. 16/2, bld. 1, 7th floor.

Russia, 125009, Moscow
Phone: +7-495-363-1694
Fax: +7-495-935-8962

United Arab Emirates

Anritsu EMEA Ltd.
Dubai Liaison Office
P O Box 500413 - Dubai Internet City
Al Thuraya Building, Tower 1, Suit 701, 7th Floor
Dubai, United Arab Emirates
Phone: +971-4-3670352
Fax: +971-4-3688460

Germany

India

Nemetschek Haus, Konrad-Zuse-Platz 1

81829 Mnchen, Germany
Phone: +49-89-442308-0
Fax: +49-89-442308-55

2nd & 3rd Floor, #837/1, Binnamangla 1st Stage,

Indiranagar, 100ft Road, Bangalore - 560038, India
Phone: +91-80-4058-1300
Fax: +91-80-4058-1301

Anritsu GmbH

Printed on Recycled Paper

Anritsu India Private Limited

P.R. China (Shanghai)

Anritsu (China) Co., Ltd.
Room 2701-2705, Tower A,
New Caohejing International Business Center
No. 391 Gui Ping Road Shanghai, 200233, P.R. China
Phone: +86-21-6237-0898
Fax: +86-21-6237-0899

P.R. China (Hong Kong)

Anritsu Company Ltd.
Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza,
No. 1 Science Museum Road, Tsim Sha Tsui East,
Kowloon, Hong Kong, P.R. China
Phone: +852-2301-4980
Fax: +852-2301-3545

Japan

Anritsu Corporation

8-5, Tamura-cho, Atsugi-shi, Kanagawa, 243-0016 Japan

Phone: +81-46-296-1221
Fax: +81-46-296-1238

Korea

Anritsu Corporation, Ltd.

5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si,

Gyeonggi-do, 463-400 Korea
Phone: +82-31-696-7750
Fax: +82-31-696-7751

Australia

Anritsu Pty. Ltd.

Unit 21/270 Ferntree Gully Road, Notting Hill,

Victoria 3168, Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255

Taiwan

Anritsu Company Inc.

7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, Taiwan

Phone: +886-2-8751-1816
Fax: +886-2-8751-1817

Catalog No. MU909014x/15x-E-A-1-(10.00)

Printed in Japan

1404

16/OCT/2014 ddcm/CDT