Mathematics BSc (G100)

Imperial College London

This information was taken from the list provided by the Department of Mathematics at
http://www.imperial.ac.uk/naturalsciences/departments/mathematics/study/students/undergraduat
e/programme-information/ accessed on 13th August 2015 for the summary of the syllabus on
2014-2015.
There may be a slight change from time to time. Please refer to the webpage for further
information.

YEAR PROGRAMMES
FIRST YEAR PROGRAMME
The First Year programme takes place over three terms Term 1 (also known as Autumn Term),
Term 2 (also known as Spring Term) and Term 3 (also known as Summer Term).
The programme of study in the First Year is broadly based so that students are given a variety of
basic courses, each of which is a prerequisite for developments in later years of the various
degree programmes. Certain minor variations are indicated below.
In the First Year, all programme elements are compulsory. There are eight lecture courses in
Mathematics which are primarily assessed by an examination in May/June.
For G104 Mathematics with a Year in Europe an appropriate language course is also normally
required in addition to the mathematics courses taken. However, students who are especially
well prepared in the language for their proposed year of study away may exceptionally have the
language course requirements waived.
Note: Whilst G104 students must pass the language examinations at the end of First and Second
Year in order to stay on G104, language examination results do not directly contribute to their
mathematics degree Honours mark.
Students must also take M1C Mathematical Computation, currently using Maple and Matlab,
assessed by coursework during Term 1 and Term 2. Following the May/June examinations,
students participate in the M1R Individual Poster Project. M1C Mathematical Computation and the
M1R Individual Poster Project must be passed in order to progress into the Second Year.
Course
Codes

Course Titles

M1F

Foundations of Analysis

No. of
Lectures/Classes
(Approx.)
30 / 10

M1GLA

Geometry and Linear Algebra

30 / 10

M1M1
M1S
M1A1
M1M2
M1P1
M1P2
M1C
M1R

Mathematical Methods 1
Probability and Statistics 1
Mechanics
Mathematical Methods 2
Analysis 1
Algebra 1
Mathematical Computation
Individual Poster Project

Language

G104 students normally take an

appropriate language course in
addition to the mathematics
courses taken.

Terms

Honours
Marks

ECTS
Values

100

6.5

100

6.5

30 / 10
30 / 10
30 / 10
30 / 10
30 / 10
30 / 10
22 / 20
6/6

1
1
2
2
2
2
1+2
3

100
100
100
100
100
100
50
50

6.5
6.5
6.5
6.5
6.5
6.5
4
4.5

Depends on course
taken

1+2

First Year Syllabus Details

M1F

FOUNDATIONS OF ANALYSIS

Professor A. Corti
(Term 1)
An introductory course involving basic material, which will be widely used later.
Number systems. Integers, rational numbers, real numbers, decimal expansions for rationals and
reals. Inequalities, complex numbers.
Induction; examples and applications.
Sets, functions, countability, logic.
Permutations and combinations. The Binomial Theorem.
Equivalence relations and arithmetic modulo n.
Euclids algorithm.
Introduction to limits.

M1GLA

GEOMETRY AND LINEAR ALGEBRA

Professor A.N. Skorobogatov

(Term 1)
This course details how Euclidean geometry can be developed in the framework of vector algebra,
and how results in algebra can be illuminated by geometrical interpretation.
2 dimensional geometry: Vectors, lines, triangles, Cauchy-Schwarz inequality
Matrices and linear equations: Gaussian elimination, matrix algebra, inverses, determinants of
2x2 and 3x3 matrices.
Eigenvalues and eigenvectors, diagonalisation of matrices and applications.
Conics and quadrics: Matrix methods, orthogonal matrices and diagonalisation of symmetric
matrices.
3 dimensional geometry: Lines, planes, vector product, relations with distances, areas and
volumes.
Vector spaces: Axioms, examples, linear independence and span, bases and dimension,
subspaces.

M1M1

MATHEMATICAL METHODS 1

Professor A.J. Mestel

(Term 1)
The course supplies a firm grounding to A-level topics such as differentiation, integration, complex
numbers and series expansions.
Functions: Polynomial, rational, trigonometric, exponential, logarithmic and hyperbolic functions;
even and odd functions. Inverse functions.
Limits: basic properties and evaluation; continuity and discontinuous functions.
Differentiation: definition as limit; differentiability; logarithmic and implicit differentiation; higher
derivatives; Leibnizs formula; stationary points and points of inflexion; curve sketching; parametric
representation, polar co-ordinates.
Power Series: Mean Value theorem; Taylors theorem with remainder; infinite power series; Radius
of convergence; the ratio test; Taylor and Maclaurin series; de LHpitals rule.

Integration: definition as Riemann limit; indefinite & definite integrals; the fundamental theorem of
calculus; integration by substitution and by parts; partial fractions; Existence of improper and
infinite integrals. Integrals over areas and volumes.
Complex Numbers: definition; the complex plane; standard and polar representation; de Moivres
Theorem; exp(z) and log(z).
First order differential equations; separable, homogeneous, linear. Linear higher order equations
with constant co-efficients.

M1S

PROBABILITY AND STATISTICS 1

Professor E.J. McCoy

(Term 1)
Sample spaces and events. Probability: definition, axioms, interpretations. Conditional probability,
theorem of total probability, Bayes theorem.
Counting techniques: combinatorics.
Discrete random variables and distributions, generating functions, expectation, variance and
covariance.
Continuous random variables and distributions. Univariate transformations. Joint distributions,
marginal and conditional distributions. Expectations (and other calculation techniques) for sums of
random variables.
The central limit theorem.

M1A1

MECHANICS

Dr E.E. Keaveny
(Term 2)
This introductory course on Applied Mathematics is centred on Newtonian mechanics - the
consequences of Newtons laws. Some of the course overlaps with A-level Applied Mathematics.
It includes far-reaching ideas on energy, linear and angular momentum, simple oscillatory systems
and motion under central forces such as planetary motion.
KINEMATICS: Motion along a line. Motion in a plane position vectors, velocity, acceleration.
Relative motion. Projectiles with gravity. Intrinsic co-ordinates.
DYNAMICS: Newtons Laws of Motion. Acceleration as functions of speed and/or distance.
Projectiles with resistance. Linear momentum, energy, conservative systems (potential wells,
stability of equilibrium, and small oscillations). Oscillators with damping and forcing. Central forces
angular momentum and energy conservations (inverse square law, planetary motion, isotropic
oscillator).
(Briefly: rotating frames (in plane), systems (2-body problem), variable mass (rocket).

M1M2

MATHEMATICAL METHODS 2

Professor M. Barahona
(Term 2)
This course continues and extends the techniques introduced in M1M1, with further differential
equations and partial differentiation. There are brief introductions to difference equations, curve
fitting and scaling, together with a variety of applications of integration.
First and second order differential equations.
Homogeneous and inhomogeneous linear differential equations.
Systems of linear differential equations matrix solution.
Phase plane analysis: Qualitative analysis of solutions of differential equations and stability.

Bifurcation of first order non-linear differential equations.

Partial differentiation: Definitions, implicit partial differentiation, total differential, change of
variables.
Functions of two variables: Taylors theorem, stationary pointe and their classification, contours.
Vector calculus: Definitions and physical meaning of grad, div, curl.
Applications of partial differentiation: Optimisation and Lagrange multipliers.
Applications of integration area under curves, arc length, surface area and volume of revolution;
double integrals geometry, mass, moments of inertia; simple triple integrals.

M1P1

ANALYSIS 1

Professor R. Thomas
(Term 2)
A rigorous treatment of the concept of a limit, as applied to sequences, series and functions.
Real and complex sequences. Convergence, divergence and divergence to infinity.
Sums and products of convergent sequences. The Sandwich Test. Sub-sequences, monotonic
sequences, Bolzano-Weierstrass Theorem. Cauchy sequences and the general principle of
convergence.
Real and complex series. Convergent and absolutely convergent series. The Comparison Test
for non-negative series and for absolutely convergent series. The Alternating Series Test.
Rearranging absolutely convergent series. Radius of convergence of power series. The
exponential series.
Limits and continuity of real and complex functions. Left and right limits and continuity. Maxima
and minima of real valued continuous functions on a closed interval. Inverse Function Theorem for
strictly monotonic real functions on an interval.
An introduction to differentiability: definitions, examples, left and right derivative.

M1P2

ALGEBRA 1

Dr J. Britnell
(Term 2)
Introductions to three topics in abstract algebra: The theory of vector spaces and linear
transformations, the theory of groups and the theory of rings.
Vector spaces: Linear maps, rank-nullity theorem, connections with linear equations and matrices.
Groups: Axioms, examples. Cyclic groups, dihedral groups, symmetric groups. Lagranges
theorem and applications.
Rings: Polynomial rings, rings of the form Z[sqrt(d)]. Euclids algorithm for certain rings.
Uniquenes of factorisation for these rings. Applications to Diophantine Equations.

M1C

MATHEMATICAL COMPUTATION

Dr P.J. Ramsden
(Term 1)
A set of lectures and practical sessions to develop student computational skills. The use of Maple
to explore and illustrate mathematical ideas will be taught. Practical work will be based on
syllabus material in the parallel courses.
Dr P.J. Ramsden
(Term 2)
A brief introduction to numerical methods using Matlab, including error and convergence ideas.

Iterative solution of a non-linear equation.

Numerical quadrature.
Numerical solution of ordinary differential equations.

M1R

INDIVIDUAL POSTER PROJECT

Supervised by Various Academic Staff

Coordinator: Dr J. Britnell
(Term 3)
Following the May/June examinations, all students must produce a poster based on a subject
suggested by one of the compulsory special seminar series. In the last week of term, students will
be required to present their poster and explain it orally. Courses on LaTeX and presentation skills
will be offered to assist students.

First Year Programme Diagram

SECOND YEAR OVERVIEW

The programme of study in the Second Year extends and enhances major themes that feature in the First Year
and takes place over three terms Term 1 (also known as Autumn Term), Term 2 (also known as Spring Term)
and Term 3 (also known as Summer Term).
The programme has ten examined mathematics courses that have up to 30 lectures or their equivalent. Seven
of the courses are compulsory and students must then choose one course from the remaining three course
options. There is also the (compulsory) assessed M2R Group Project in Term 3, which involves written, oral and
collaborative elements.
For the courses M2AA1, M2AA2, M2AA3, M2PM1, M2PM2, M2PM3, M2S1 the Department normally expects to
run supporting problems classes. For other courses this provision is expected to be within the timetabled
lectures the normal expectation is that there should be a lecture/class balance of about 5/1. The
identification of particular class times within the timetabled periods is normally at the discretion of the lecturer, in
consultation with the class and as appropriate for the course material.
The limited option available at Second Year level is not expected to restrict choice crucially in later years. It
should be regarded as an opportunity to taste special interests. This is especially true for the BSc degree
codings G102, G125, G1F3, G1G3, G1GH, GG31.
Students registered on G100, G103, G104 have a free choice and G103 students will then be expected to plan
their Third and Fourth Year programme of options jointly as they progress into the Third Year of study.
In addition, one of the M2 option courses can feature as part of the Third Year choice if not taken in the Second
Year.
Note that the choice of options for all students is subject to the approval of the Department of
Mathematics.
It is normally required that students pass ALL programme elements in order to graduate. However, under
exceptional circumstances, the College may condone a narrow fail in the Final Year of study in order to permit a
student to graduate, but this cannot be guaranteed.
It is normally required that students pass ALL programme elements (including the M2R Group Project) in order
to proceed into the Third Year.
MSci Degrees: The first two years of study on the BSc and MSci degree codings are the same. Those
students who were originally registered on the MSci coding and those who have transferred onto it are normally
required to maintain a good level of performance in mathematics (at Upper Second Class level or better) in order
to remain on the coding in the Third Year. Students on the MSci coding are also required to make satisfactory
progress in the Third Year to remain on the Four Year programme.
G103: The primary criterion for eligibility to remain on G103 is to achieve a year total of at least 600 in
Second Year. Students who score 600+ in Second Year, 580+ in Third Year and pass all their Third Year
courses, have the automatic right to continue on to the Fourth Year of the MSci degree. Anyone scoring less
than 580 in their Third Year, or who fails a course, does not have this right and may be graduated with a BSc at
the Departments discretion (which is exercised only rarely).
Those who score less than 600 in their Second Year may be allowed to remain on G103 at the Senior Tutors
discretion but will have conditions set for their Third Year performance that take precedence over the rule above.
For further information on year totals, please see pages 4-5.

G104: Students registered for G104 Mathematics with a Year in Europe spend their Third Year (of four) studying
mathematics courses/project material at another European institution. At the end of Second Year, students must
be in a position to take advantage of the Third Year of the course, both mathematically and linguistically.
Note: Whilst G104 students must pass the language examinations at the end of First and Second Year in order
to stay on G104, language examination results do not directly contribute to their mathematics degree Honours
mark.

SECOND YEAR COURSE STRUCTURE

Term 1: ALL 4 COMPULSORY
MULTIVARIABLE
CALCULUS
M2AA2

REAL ANALYSIS
M2PM1

ALGEBRA 2
M2PM2

PROBABILITY AND
STATISTICS 2
M2S1

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

Term 2: 3 COMPULSORY, 1 OPTION

INTRODUCTION TO
NUMERICAL
ANALYSIS
M2AA3

COMPLEX
ANALYSIS
M2PM3

DIFFERENTIAL
EQUATIONS
M2AA1

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

OPTIONS

NON-LINEAR
WAVES
M2AM

MERIC SPACES
AND TOPOLOGY
M2PM5

STATISTICAL
MODELLING 1
M2S2

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

Honours Mark - 100

ECTS Value - 7

ONE FROM

Term 3: REVISION CLASSES/EXAMINATIONS

GROUP PROJECT
M2R
Honours Mark - 50
IMPERIAL
ECTS Value - 5

EXAMINATIONS
In May/June there is one written examination in each of M2AM, M2AA1, M2AA2, M2AA3, M2PM1, M2PM2,
M2PM3, M2PM5, M2S1, M2S2. The courses generally have an assessed coursework/progress test element
which is limited to ~10% of the overall assessment in each case.
Students who do not obtain Passes in examinations at the first attempt will be expected to attend resit
examinations where appropriate. September resits are available to Second Year students followed by resit
opportunities the following May/June. Two resit attempts are normally available to students.
Note: Resits may not be offered for courses assessed solely by project.
Resit examinations are for Pass credit only a maximum mark of 30 will be credited. Once a Pass is
achieved, no further attempts are permitted.
Students who have not achieved the required Passes by the beginning of the new academic year are required
by College to spend a year out of attendance. During this time they are not considered College students. This
may create a number of issues and hold visa implications.

M2R GROUP PROJECT

After the examinations in Term 3 there is the M2R Group Project, which counts in the assessment of Honours
and must be passed for progression into the Third Year. The M2R Group Project has oral and collaborative
elements and it counts for Honours marks up to the equivalent of half of one of the lectured courses.
There is normally no resit opportunity within the session for the M2R Group Project

PROGRESSION TO THE THIRD YEAR

It is normally required that students pass ALL programme elements (including the M2R Group Project) in order
to proceed into the Third Year.

HONOURS MARKS, YEAR TOTALS AND YEAR WEIGHTINGS

Currently within the Department each total course assessment is rescaled so that overall performances in
different cases may be compared. The rescaling onto the scale 0 100 Honours marks is such that 30 then
corresponds to the lowest Pass Honours mark and 75 corresponds to the lowest First Class performance.
[These are not percentages!]
Note that Registry report individual course performances on transcripts using the uniform College Scale. On this
scale a Pass mark is reported as 40 and the lowest First Class mark is 70.
Information on the Mathematics and College scales can be viewed online at:

http://www3.imperial.ac.uk/mathematics/students/undergraduate/faq/mathematicsandcollegescalemarks
The total Second Year Honours mark available is 850, made up as 8x100 lecture courses together with 1x50
(M2R Group Project)
Note: For uniformity, the total Honours marks for each year are scaled out of 1000 and are known as a year
total. Students are informed of their year total on Blackboard.
For three year BSc codings, the year weightings are 1 : 3 : 5.
For the four year MSci codings the year weightings are 1 : 3 : 4 : 5 (G103, G104).
These differences in year weighting reflect the increasing level of mathematical complexity.

ECTS
As part of the compliance with the European Bologna Process, Department of Mathematics courses and
degrees are required to be rated via the European Credit Transfer System (ECTS) which is based notionally
on hour counts for elements in the degree.
Each Second Year mathematics course has an ECTS value of 7 with M2R having an ECTS value of 5. First
Year mathematics courses have an ECTS value of 6.5 except for M1R which has an ECTS value of 4.5 and
M1C which has an ECTS value of 4. Language courses, taken by G104 Mathematics with a Year in Europe
students, have an ECTS value of 6.
Further information on the Bologna Process and ECTS can be viewed online at:
http://www3.imperial.ac.uk/ugprospectus/whatcanyoustudy/bolognaprocess
ECTS ratings of Department of Mathematics courses and degrees can be
http://www3.imperial.ac.uk/mathematics/students/undergraduate/programmeinformation

viewed

online

at:

MSci students who wish to increase their ECTS counts from roughly 240 to 270 must undertake
additional study over the summer vacations of their Second and Third Years. Contact the Director of
Undergraduate Studies for further information.

SECOND YEAR MATHEMATICS SYLLABUSES

COMPULSORY COURSES
M2AA1

DIFFERENTIAL EQUATIONS

Professor S.J. van Strien

Term 2
Differential equations and systems have a rich structure, which is explored in this course using ideas from
analysis, algebra and geometry. There is a similar theory for discrete systems (maps).
First order differential equations (linear and non-linear). Existence and Uniqueness. Explicit solutions for special
classes of differential equations. Second and higher order differential equations. Power series solutions.
Boundary value problems.

M2AA2

MULTIVARIABLE CALCULUS

Dr A. Walton
Term 1
The calculus of functions of several independent variables is developed in this course, together with an
introduction to partial differential equations. The importance of these ideas is emphasized by the inclusion of a
number of applications in Science and Engineering.
Integrals in three dimensions: curves, line integrals, Greens theorem, transformation of integrals.
Vector calculus: tensor notation, vector fields, grad, div, curl, surface integrals, divergence theorem, Stokess
theorem, curvilinear co-ordinates.
Fourier series: even and odd functions, full-range series, half-range series, Parsevals theorem, the Gibbs
phenomenon.
Partial differential equations (wave, Laplace, heat). Method of separation of variables.
M2AA3

INTRODUCTION TO NUMERICAL ANALYSIS

Dr R. Nurnberg
Term 2
An important applied analysis course leading also to an introduction to some of the standard algorithms in
numerical analysis.
n

Orthogonality: Inner/outer products on R , review linear dependence/independence, orthogonal/orthonormal

vectors, classical Gram-Schmidt, orthogonal matrices, diagonalisation of symmetric matrices, Givens rotations,
QR factorization, Cauchy-Schwartz inequality.
n
Gradients/Hessians: Taylor series for f: R R, classification of stationary points, positive definite matrices,
n
generalised inner products on R , Cholesky factorization of symmetric positive definite matrices.
Least Squares Problems: Normal equations and QR approach for overdetermined systems Ax=b, inner
products on a general vector space, least squares problems, gram matrices, Hilbert matrix.
Orthogonal Polynomials: Monic orthogonal polynomials, three term recurrence relationship, best approximation
by polynomials in inner product induced norms, Chebyshev and Legendre polynomials. Fourier series.
Polynomial Interpolation: Lagrange, Newton and canonical forms of interpolating polynomial, existence and
uniqueness, divided differences, error analysis, Runge phenomenon.
Mini-Max Approximation: Best approximation by polynomials in the uniform sense, Chebyshev equioscillation
theorem, optimal interpolation points zeros of Chebyshev polynomial.
Gaussian Quadrature: Optimal sampling points zeros of corresponding polynomial.
Visualisation through Maple/Matlab commands and graphics.
M2PM1

REAL ANALYSIS

Dr S. Rodriguez-Lopez
Term 1
The aim of this course is to provide a rigorous foundation for the differential and integral calculus.
Differentiable functions. Maxima and strict maxima. Rolles theorem.
Mean value theorem. Higher derivatives. Taylors theorem. Analytic functions Riemann integration. Integrability
of continuous and monotonic functions.
The fundamental theorem of calculus.
Open, closed and compact sets. Elementary measure theory. Functions of many variables.
n
Differentiation in R . Partial derivatives. Directional derivatives

M2PM2

ALGEBRA 2

Professor K. Buzzard
Term 1
A continuation from Algebra I in Groups and Linear Algebra.
Groups: Homomorphisms, isomorphisms, normal subgroups, first isomorphism theorem. Fundamental theorem
of abelian groups, groups of small order. Group actions, Burnsides lemma, applications.
Linear algebra: Direct sums, quotient spaces. Determinants, minimal polynomials, Cayley-Hamilton theorem.
Canonical forms of matrices, Jordan normal form, rational canonical form.
M2PM3

COMPLEX ANALYSIS

Professor A. Laptev
Term 2
This course concerns continuity, differentiation and integration of complex valued functions, with applications to
real integration.
The complex numbers; algebraic and metric structure. Sequences and series of complex numbers. Power
series. Exponential, Trigonometric and Logarithmic functions. Complex functions; continuity, differentiability,
behaviour on compact sets.
Functions defined by power series. Line integrals, theorem of the primitive, the ML inequality.
Cauchys Theorem for a triangle, a star domain; computation of real integrals. Local theory for analytic
functions; uniform convergence of Power Series, Cauchys Integral Formula, Taylors Theorem, Cauchy
Estimates. Liouvilles Theorem.
The Fundamental theorem of Algebra. Zeros of Analytic Functions. Functions analytic in an annulus, Laurents
expansion.
Classification of Singularities. The Residue Theorem; more real integrals!
M2S1

PROBABILITY AND STATISTICS 2

Professor D.A. van Dyk

Term 1
This course extends the ideas met in MIS and introduces the distributional results needed for the study of
statistical inference and applied probability.
Probabilities for events. Random variables. Poisson process. Moment generating functions. Probability densities.
Limit theorems. Inequalities. Joint distributions. Multinomial and bivariate normal distributions. Transformations.
Order statistics, Bayesian Statistical Inference, Frequency-Based Statistics, Hierarchical models and mixture
distributions

OPTION COURSES
One of the M2 option courses can feature as part of the Third Year choices if not taken in the Second Year.
M2AM

NON-LINEAR WAVES

Professor D. Papageorgiou
Term 2
This course considers the dynamics of a continuous medium or fluid. One dimensional flows and waves are
considered in detail.
The continuum hypothesis and fluid particles.
Revision of transformation of partial derivatives.

Eulerian and Lagrangian descriptions of ID fluid motion.

Fluid acceleration, material derivative.
Simple problems in finding position, given velocity and vice versa.
Conservation of mass, equation of continuity.
Application to traffic flow (or something similar).
Linear solutions leading to wave equation and DAlemberts solution.
Non-linear solutions leading to kinematic wave equation and general implicit solution.
Wave steepening.
Method of characteristics.
Shocks and weak solutions: shock evolution equation.
Pressure and gravitational forces.
Conservation of momentum Eulers equation.
Ideal gas dynamics: linear and non-linear problems leading to same equations as above.
Quasi 1D flows: modified Euler equation.
Application to physiological flows, river flows and hydraulic jumps all leading to similar equations to those
already studied.
Shallow water waves, dam break problems.
Dispersion relations, wave-packets, group velocity.
Deep water gravity-capillary waves.
Finite amplitude capillary waves.
Weakly non-linear water waves the Korteweg de-Vries equation.
M2PM5

METRIC SPACES AND TOPOLOGY

Dr I. Krasovsky
Term 2
This course extends various concepts from analysis to more general spaces.
Metric spaces. Convergence and continuity. Examples (Euclidean spaces, function spaces; uniform
convergence). The open sets in a metric space; equivalent metrics. Convergence and continuity in terms of
open sets: topological spaces. Subspaces. Hausdorff spaces. Sequential compactness; compactness via open
n
covers; compact spaces; determination of compact subspaces of R . Completeness in metric spaces.
Relationship between compactness and completeness. Connected and path connected spaces; equivalence of
n
these notions for open sets in R . Winding numbers, definition of fundamental group, its computation for the
circle. Example: proof of fundamental theorem of algebra.
M2S2

STATISTICAL MODELLING 1

Dr B. Calderhead
Term 2
Traditional concepts of statistical inference, including maximum likelihood, hypothesis testing and interval
estimation are developed and then applied to the linear model that arises in many practical situations.
Maximum likelihood estimation, likelihood
ratio tests and their properties, confidence intervals.
Linear models - including non-full rank models: estimation, confidence intervals and
hypothesis testing. The analysis of variance.