0% found this document useful (0 votes)
353 views4 pages

FortiAP-223B Data Sheet

The Need for a Fortified Wireless LAN Enterprises are looking to increase productivity through uninterrupted access to applications and resources, without compromising security and agility. You want to increase visibility and control of your wireless network traffic by enforcing the same policies as your wired network and eliminate potential blind spots. You also need a solution that meets compliance objectives by proactively blocking unauthorized access, providing tools for business continuity, and following industry best practices. Integrated Wireless Security and Access Solution Fortinet’s FortiAP-221B and FortiAP-223B wireless thin access points deliver secure, identity-driven WiFi client access that creates a fortified WLAN network. Centrally managed by a FortiGate® or FortiWiFi™ platform with its integrated wireless controller, FortiAPs allow you to deploy a comprehensive, integrated security solution for your wireless and wired networks. By acting as a Wireless Controller, FortiGate or FortiWiFi security platforms enable you to deploy comprehensive unified threat management (UTM) protection over your wireless network. Industry-Leading Wireless Technology The FortiAP-221B and FortiAP-223B boasts the latest generation of wireless hardware with encompasses a set of advanced technologies and features enabled by 802.11n. This includes Low-density parity check (LDPC) encoding, Maximum likelihood demodulation/Maximum Ratio Combining (MRC)/(MLD), and Transmit Beamforming (TxBF). The end result is an impressive increase performance and coverage of ~+100% at short range, ~+50% at mid range and ~+25% at long range. FortiAP is IEEE 802.11a/b/g/n standards-based, and operates on both 2.4 GHz b/g/n and 5 GHz a/n spectrums. It utilizes industry leading wireless chip technology that takes advantage of 2x2 MIMO (multiple input multiple output) with dual transmit streams. This MIMO technology allows the FortiAP-221B to reach wireless association rates as high as 300Mbps per radio and enables the coverage to extend more than twice as far as legacy 802.11a/b/g. FortiAP can support up to eight SSIDs per radio — seven for client access and one for scanning for rogue access points — and uses multiple techniques to find available FortiGate controllers over L2 or L3 networks. Differentiating Features & Benefits Enterprise Unified Threat Management Protects your network with the widest range of security and networking technologies seamlessly integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others. Application-Layer Quality of Service Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 traffic shaping and application use control. Robust Rogue AP Control Industry’s most comprehensive monitoring, detection and suppression of rogue APs for PC DSS compliance. “Single Pane of Glass” Management Console Unmatched visibility and control of all wired and wireless network traffic that eliminates blindspots in your security infrastructure and ensures consistent and effective policy enforcement and compliance. TX Beam Forming (TxBF) and Maximal Ratio Combining (MRC) Leads to wider coverage and optimum performance due to extended Rate over a longer range.

Uploaded by

Jefry Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
353 views4 pages

FortiAP-223B Data Sheet

The Need for a Fortified Wireless LAN Enterprises are looking to increase productivity through uninterrupted access to applications and resources, without compromising security and agility. You want to increase visibility and control of your wireless network traffic by enforcing the same policies as your wired network and eliminate potential blind spots. You also need a solution that meets compliance objectives by proactively blocking unauthorized access, providing tools for business continuity, and following industry best practices. Integrated Wireless Security and Access Solution Fortinet’s FortiAP-221B and FortiAP-223B wireless thin access points deliver secure, identity-driven WiFi client access that creates a fortified WLAN network. Centrally managed by a FortiGate® or FortiWiFi™ platform with its integrated wireless controller, FortiAPs allow you to deploy a comprehensive, integrated security solution for your wireless and wired networks. By acting as a Wireless Controller, FortiGate or FortiWiFi security platforms enable you to deploy comprehensive unified threat management (UTM) protection over your wireless network. Industry-Leading Wireless Technology The FortiAP-221B and FortiAP-223B boasts the latest generation of wireless hardware with encompasses a set of advanced technologies and features enabled by 802.11n. This includes Low-density parity check (LDPC) encoding, Maximum likelihood demodulation/Maximum Ratio Combining (MRC)/(MLD), and Transmit Beamforming (TxBF). The end result is an impressive increase performance and coverage of ~+100% at short range, ~+50% at mid range and ~+25% at long range. FortiAP is IEEE 802.11a/b/g/n standards-based, and operates on both 2.4 GHz b/g/n and 5 GHz a/n spectrums. It utilizes industry leading wireless chip technology that takes advantage of 2x2 MIMO (multiple input multiple output) with dual transmit streams. This MIMO technology allows the FortiAP-221B to reach wireless association rates as high as 300Mbps per radio and enables the coverage to extend more than twice as far as legacy 802.11a/b/g. FortiAP can support up to eight SSIDs per radio — seven for client access and one for scanning for rogue access points — and uses multiple techniques to find available FortiGate controllers over L2 or L3 networks. Differentiating Features & Benefits Enterprise Unified Threat Management Protects your network with the widest range of security and networking technologies seamlessly integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others. Application-Layer Quality of Service Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 traffic shaping and application use control. Robust Rogue AP Control Industry’s most comprehensive monitoring, detection and suppression of rogue APs for PC DSS compliance. “Single Pane of Glass” Management Console Unmatched visibility and control of all wired and wireless network traffic that eliminates blindspots in your security infrastructure and ensures consistent and effective policy enforcement and compliance. TX Beam Forming (TxBF) and Maximal Ratio Combining (MRC) Leads to wider coverage and optimum performance due to extended Rate over a longer range.

Uploaded by

Jefry Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

FortiAPTM-221B and 223B

Integrated Wireless Security and Access


The Need for a Fortified Wireless LAN
Enterprises are looking to increase productivity through uninterrupted access to
applications and resources, without compromising security and agility. You want to
increase visibility and control of your wireless network traffic by enforcing the same
policies as your wired network and eliminate potential blind spots. You also need
a solution that meets compliance objectives by proactively blocking unauthorized
access, providing tools for business continuity, and following industry best practices.

Fortinets FortiAP-221B and FortiAP-223B wireless thin access points deliver


secure, identity-driven WiFi client access that creates a fortified WLAN network.
Centrally managed by a FortiGate or FortiWiFi platform with its integrated wireless
controller, FortiAPs allow you to deploy a comprehensive, integrated security solution
for your wireless and wired networks. By acting as a Wireless Controller, FortiGate
or FortiWiFi security platforms enable you to deploy comprehensive unified threat
management (UTM) protection over your wireless network.

Industry-Leading Wireless Technology


The FortiAP-221B and FortiAP-223B boasts the latest generation of wireless
hardware with encompasses a set of advanced technologies and features enabled
by 802.11n. This includes Low-density parity check (LDPC) encoding, Maximum
likelihood demodulation/Maximum Ratio Combining (MRC)/(MLD), and Transmit
Beamforming (TxBF). The end result is an impressive increase performance and
coverage of ~+100% at short range, ~+50% at mid range and ~+25% at long range.
FortiAP is IEEE 802.11a/b/g/n standards-based, and operates on both
2.4GHzb/g/n and 5 GHz a/n spectrums. It utilizes industry leading wireless chip
technology that takes advantage of 2x2 MIMO (multiple input multiple output) with
dual transmit streams. This MIMO technology allows the FortiAP-221B to reach
wireless association rates as high as 300Mbps per radio and enables the coverage
to extend more than twice as far as legacy 802.11a/b/g. FortiAP can support up
to eight SSIDs per radio seven for client access and one for scanning for rogue
access points and uses multiple techniques to find available FortiGate controllers
over L2 or L3 networks.

Worldwide 24x7 Support


support.fortinet.com

FortiWiFi / FortiAP
Secure business-grade wireless
Wireless.fortinet.com

Leverage existing FortiGate or FortiWiFi


platforms as controllers for low TCO
Simultaneous security monitoring and
client services

Integrated Wireless Security and Access Solution

FortiCare

High Performance Secure


Thin Access Points.

Supports new directional beam forming


for higher performance at extended
range
Full range of authentications and
access for all use cases
Integration with FortiManager and
FortiAnalyzer for unified control and
reporting
Fast Roaming for uninterrupted data
access
Automatic Radio Resource Provisioning
(ARRP) for optimized throughput
Flexible deployment options with
simple per device pricing
Layer 7 application QoS for maximum
business productivity
Rogue AP control for PCI DSS
compliance

FortiGuard
Threat Research & Response
www.fortiguard.com

www.fortinet.com

FortiAP Deployment Example

File
F
ile Server

FortiGate
Wireless Controller

FortiManager
FortiAnalyzer
Centralized Management
& Reporting

FortiGate
Wireless Controller

FortiAP
FortiAP
FortiA
FortiAP

Headquarters

Branch Office

Differentiating Features & Benefits

Enterprise Unified Threat Management

Protects your network with the widest range of security and networking technologies
seamlessly integrated into a single device: Firewall, IPS, Application Control, VPN, Web
Filtering, and many others.

Application-Layer Quality ofService

Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 traffic
shaping and application use control.

Robust Rogue AP Control

Industrys most comprehensive monitoring, detection and suppression of rogue APs for
PCDSS compliance.

Single Pane of Glass Management Console

Unmatched visibility and control of all wired and wireless network traffic that eliminates
blindspots in your security infrastructure and ensures consistent and effective policy
enforcement and compliance.

TX Beam Forming (TxBF) and Maximal


Ratio Combining (MRC)

Leads to wider coverage and optimum performance due to extended Rate over a
longerrange.

radiation patterns of frequency 2.4 and 5 GHz


FAP-221B
H-Plane Pattern

30

10

20

350

340

40

320

50

E-Plane Pattern

330

(E-Plane)

80

-20

110

FLOOR
(H-Plane)

160

170 180 190

Radio 1 5.5 GHz

FAP-223B
H-Plane Pattern

30

10

20

200

350

340

(E-Plane)

290

70

300

60

E-Plane Pattern

280

-20

210

Radio 1 2.4 GHz

170

160

150
140
130
120

100
0

-20

270

270

260

280

90
80

290

70

300

60
50

310

230

200

Radio 2 2.4 GHz

110

40

320

220
170 180 190

190 180

30

260

250

160

200

20

250

240

140

10

240

290

130

350

230

300

120

340

220

310

150

50
40

Radio 1 5.5 GHz

330

110

90
80

310

80

280

320

320

70

FLOOR
(H-Plane)

260

Radio 2 2.4 GHz

60

100

100

330

50

270

210

40

90

110

230
150

130
120

220

140

140

-20

270

240

130

150

260

250

120

160

250

280

170

240

290

100

190 180

230

300

70

200

220

310

60

90

210

330

210

340

350

10

Radio 1 2.4 GHz

Radio 2 5.5 GHz

20

30

Radio 2 5.5 GHz

rf rx/tx performance table


Radio 2

802.11 a/g

2.4 GHz (FAP-221B Only)


Rx Sensitivity

5 GHz
Tx Power (dBm)

Rx Sensitivity

2.4 GHz
Tx Power (dBm)

6 Mbps

-96

20

Rx Sensitivity

-94

20

9 Mbps

-93

-88

19

-92

20

12 Mbps

-88

-90

19

-90

20

-86

18 Mbps

-87

19

-83

20

-84

24 Mbps

-85

19

-80

20

-80

36 Mbps

-82

18

-77

19

-77

48 Mbps

-78

18

-76

19

-74

54 Mbps

-77

17

-73

18

-72

MCS0

-91

20

-92

20

-92

MCS1

-91

19

-90

20

-90

MCS2

-88

19

-87

20

-87

MCS3

-85

19

-85

20

-85

MCS4

-83

19

-82

20

-82

MCS5

-80

18

-79

19

-78

MCS6

-78

18

-76

19

-77

MCS7

-76

17

-74

18

-74

MCS0 /8

-91

20

-91

20

-92

MCS1 /9

-90

19

-88

20

-89

MCS2 /10

-87

19

-85

20

-86

MCS3 /11

-82

19

-82

20

-83

MCS4 /12

-70

19

-79

20

-80

MCS5 /13

-76

18

-76

19

-77

MCS6 14

-74

18

-74

19

-74

MCS7 /15

-71

17

-72

18

-71

802.11n HT20

802.11n HT40

Specifications
TECHNICAL

Wireless Monitoring Capabilities

FortiAP-221B/223B

Hardware
Indoor/Outdoor Deployment
Number of Radios
Number of Antennas (FAP-221B)
Number of Antennas (FAP-223B)
Peak Antenna Gain
Frequency Bands (GHz) *

Indoor
2
4 internal
4 RP-SMA External
3 dBi for 2.4 GHz, 4 dBi for 5 GHz
2.4002.4835, 5.1505.250, 5.2505.350,
5.4705.725, 5.7255.850
2.4 GHz b/g/n or 5 GHz a/n
5 GHz a/n
2.4GHz IEEE b/g/n
2x2 MIMO dual spatial stream 300 Mbps/Radio
1x 10/100/1000
None
IEEE 802.3af (15.4W)
Yes (4 priority queues for voice, video, data and
backgroundtraffic)
16 (14 for client access, 2 for monitoring)
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2,
PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST
WPA and WPA2 with 802.1x or Preshared key, WEP
and Web Captive Portal, MAC blacklist & whitelist
17dBm (50mW)
Kensington Lock
> 10 years
802.11a, 802.11b, 802.11e, 802.11g, 802.11h,
802.11i, 802.11j, 802.11n, 802.1X, 802.3af
20Mhz and 40Mhz High-Throughput (HT) Support
Increased maximum frame transmission by incorporating
A-MPDU and A-MSDU Packet Aggregation
Conserve power via Dynamic MIMO power save
Low-density parity check (LDPC) encoding
Maximum likelihood demodulation (MLD)
Transmit beamforming (TxBF)
Maximum Ratio Combining (MRC) for improved receiver
performance

Frequency of Radio 1 (FAP-221B)


Frequency of Radio 1 (FAP-223B)
Frequency of Radio 2
Tx/Rx Streams (802.11n mode)
Ethernet Port
Serial Console Port
Power over Ethernet (PoE)
WME Multimedia Extensions
Simultaneous SSIDs
EAP Type(s)
User/Device Authentication
Maximum Tx Power
Physical Security
Mean Time Between Failures
IEEE Specifications
802.11n Features

Advanced 802.11n to enhance rate-overrange including:

Frequencies scanned
Background scan with client access on
2.4and5 GHz
Full-time scan as dedicated Monitor

2.4 GHz and 5 GHz


Supported

Full-time scan with client access on 2.4 GHz


Target Application (FAP-221B)

Supported on FAP-221B
Simultaneous AP and dedicated air monitor or concurrent
2.4 GHz and 5 GHz AP with background scan.
For applications that require connection to directional
externalantennas.

Supported

Target Application (FAP-223B)

Dimensions
Diameter x Height (FAP-221B)
Diameter x Height (FAP-223B)
Weight
Package (shipping) Weight
Mounting Options

6.5 in x 1.2 in (16.51 cm x 4 cm)


6.5 in x 2.0 in (16.51 cm x 5 cm)
10.3 oz (300 g) (FAP-221B) 12.3 oz (350 g) (FAP-223B)
19.5 oz (550 g) (FAP-221B) 21.3 oz (600 g) (FAP-223B)
Drywall Mount anchors, T-Rail Mount and Ceiling mount are
included in package

Environment
Power Adapter **

Adapter Input: 100-240V, 50/60Hz, 0.4A


Output: 12V DC, 1.25A center positive
6.78 W (FAP-221B)
6.78 W (FAP-223B)
11.76 W (FAP-221B)
11.76 W (FAP-223B)
10% to 90% non condensing
32104 F (040 C)
-4158 F (-2070 C)
Low Voltage Directive RoHS2

Power Consumption (AVG)


Power Consumption (MAX)
Humidity
Operating Temperature
Storage Temperature
Directives

Certifications
WiFi Alliance Certified

Yes

DECLARATION OF CONFORMITY

Order Information

Organization

Compliance Identifier

CB
UL
FCC
IC
CE

IEC 60950-1
UL 60950-1, CSA C22.2 No. 60950-1
FCC Part 15 Subpart B (Class B), Subpart C and Subpart E
RSS-210, RSS-GEN, RSS-102, ICES-003
R&TTE Directive 1995/5/EC (EN 300 328, EN 301 893,
EN 301 489, EN 50385, EN 60950-1)
EMC Directive 2004/108/EC (EN 55022, EN 55024)
LVD Directive 2006/95/EC (EN 60950-1)
RoHS2 Directive 2011/65/EU (EN 50581)

* Frequency selection may be restricted to abide by regional regulatory compliance laws. ** Sold separately. See price list.

Product

SKU

Description

FortiAP-221B

FAP-221B

FortiAP-223B

FC-10-P0223-311-02-DD
FC-10-P0223-247-02-DD
FAP-223B

Indoor wireless AP 1x GE RJ45 port, dual radio (802.11 a/b/g/n and 802.11 b/g/n, 2x2 MIMO), Ceiling/wall mount kit included, Power adapter not included. For Gigabit PoE
injector order: GPI-115. For AC power adapter order: SP-FAP221B-PA.
8x5 FortiCare Contract.
24x7 FortiCare Contract.
Indoor wireless AP 1x GE RJ45 port, dual radio (802.11 a/b/g/n and 802.11 b/g/n, 2x2 MIMO), external antennas, Ceiling/wall mount kit included, Power adapter not included.
For Gigabit PoE injector order: GPI-115. For AC power adapter order: SP-FAP221B-PA.
8x5 FortiCare Contract.
24x7 FortiCare Contract.
4 Omnidirectional 360 degree replacement antennas for FAP-223B with RP-SMA connectors (2 units of 2.4 G and 2 units of 5 G in package for FAP-223B).
AC Power Adapter for FAP-221B and FAP-223B.
1-Port Gigabit PoE Power Injector, 802.3af 15.4 Watts 10/100/1000 (PD-3501).
FortiPlanner Wireless AP Deployment Planning Utility FortiPlanner Lite Edition free download from Fortinet.com to support up to 50 Access Points. Requires Windows XP or Windows 7.
FortiPlanner Wireless AP Deployment Planning Utility Pro upgrade license unlocks FortiPlanner Lite (free version) to support more than 50 Access Points and includes site survey
tool. Requires Windows 7.

AC Power Adapter
GPI-115 PoE
FortiPlanner

FC-10-P0224-311-02-DD
FC-10-P0224-247-02-DD
FAN-336R-223
SP-FAP221B-PA
GPI-115
N/A
FAP-FPL-PRO

REGION/COUNTRY SKU SUFFIX*

Americas-FCC

China

Europe ETSI

International

Japan

Korea

Non-FFCA

Singapore

Taiwan

World 2.4G

-A

-C

-E

-I

-J

-K

-N

-S

-T

-W

*For the complete list of countries and regions, refer to http://www.fortinet.com/wireless.

GLOBAL HEADQUARTERS
Fortinet Inc.
899 Kifer Road
Sunnyvale, CA 94086
United States
Tel: +1.408.235.7700
Fax: +1.408.235.7737

EMEA SALES OFFICE

APAC SALES OFFICE

LATIN AMERICA SALES OFFICE

120 rue Albert Caquot


06560, Sophia Antipolis,
France
Tel: +33.4.8987.0510
Fax: +33.4.8987.0501

300 Beach Road #20-01


The Concourse
Singapore 199555
Tel: +65.6513.3730
Fax: +65.6223.6784

Prol. Paseo de la Reforma 115 Int. 702


Col. Lomas de Santa Fe,
C.P. 01219
Del. Alvaro Obregn
Mxico D.F.
Tel: 011-52-(55) 5524-8480

Copyright 2014 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may
also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained
in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing
herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinets General
Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics
expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinets internal lab tests.
Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication
without notice, and the most current version of the publication shall be applicable.
FST-PROD-DS-AP2H FAP-221B-223B-DAT-R6-201404

You might also like