SL030 PDF
Uploaded by
chidambaram kasiSL030 PDF
Uploaded by
chidambaram kasiwww.scoda.
it
Table SL030-6/E
Standard hydraulic power packs type SSH
vertical motor, submersed pump - reservoir capacity 10, 25 and 50 liters
SSH hydraulic power packs are compact design standard units made according to machinery directive 2006/42/CE
with vertical motor pump unit.
Electric motors and pumps are available
in different variants , modular subplates
type BA-244/*, to realize customized
hydraulic circuits with modular and
directional valves (ISO 4401 size 06),
can be assembled are mounted on the
cover.
Basic version is composed by:
electric motor coupled with hydraulic pump ;
suction submersed filter;
return filter with visual clogging indicator;
pressure relief valve;
glycerine filled pressure gauge 60
with shut-off valve ;
reservoir with visual oil level , filling plug with air filter and
emptying .
1
MODEL CODE
SSH
25
142
1,1
/R
**
Type of hydraulic
Design number
Reservoir capacity:
10 = 10 liters
25 = 25 liters
50 = 50 liters
Options:
/R = check valve on P line
/V = reservoir with oil collecting bottom lip.
Eventual suffix
S = without electric motor
Type of pump
G = gear pump type PFG (see tab. SA055)
Pump displacement, see section for available combinations:
114 = 1,3 cm3/rev
128 = 2,7 cm3/rev
142 = 4,1 cm3/rev
160 = 6,1 cm3/rev
174 = 7,4 cm3/rev
187 = 9,1 cm3/rev
199 = 10,8 cm3/rev
Other displacements are available on request
Electric motor power, see section
0,4 = 0,37 kW
0,7 = 0,75 kW
1,1 = 1,1 kW
1,5 = 1,5 kW
2,2 = 2,2 kW
3 = 3 kW
4 = 4 kW
Supply voltages, see section
HYDRAULIC SCHEMES
Standard version
With check valve on P line
(OPTION /R)
X-MAN-60/*
X-MAN-60/*
X-AQM-6
X-AQM-6
DR-10/G
BA-244/0/M5/**
BA-244/0/RM5/***
Y-FAC-*
Y-FAC-*
Y-FPF-*/25/V1
PFG
X-FUI-*/125
Y-FPF-*/25/V1
PFG
Y-LVT-*
X-FUI-*/125
Y-LVT-*
SL030
MAIN CHARACTERISTICS
Installation position
Ports
Horizontal: electric motor with vertical axis
Ports P and T at G 3/8
Customized circuits
Customized circuits can be easily realized by means of modular plates type BA-244/*, (see tab.
SK290), modular valves size ISO 4401 size 06, solenoid valves and directional valves type DH*.
In particular:
assemble on the subplate BA-244/0/*** installed on the power-pack cover, the required number
of intermediate multistation subplates BA-244/* (max 10 stations);
modular control valves type HMP, HM, HS, HG, HC, HQ, HR, solenoid valves and directional val
ves type DH* can be mounted on these intermediate plates according to the requested hydraulic.
Fluid
Recommmended viscosity
Fluid contamination class
Fluid temperature
Ambient temperature
Hydraulic oil as per DIN 51524...535; for other fluids contact our technical office
15 100 mm2/s at 40C (ISO VG 15 100).
ISO 19/16, achieved with in line filters at 25 m and 25 75 (recommended)
-20C + 60C (standard and /WG seals ) -20C + 80C (/PE seals)
from -20 C to + 70 C
Note: The central SSH-10 is not the oil filter on the return
HYDRAULIC CHARACTERISTICS
Model
Flow rate
at 1450 rpm
and 7 bar
[l/min
Pump
type
Maximum pressure [bar] with motors power:
0,37 kW
size
UNEL 71
(1)
0,75 kW
size
UNEL 80
(1)
1,1 kW
size
UNEL 90
(1)
1,5 kW
size
UNEL 90
(1)
2,2 kW
size
UNEL 100
(1)
3 kW
grandezza
UNEL 100
(1)
4 kW
grandezza
UNEL 112
(1)
Capacity of
reservoir
[liters]
7,5 Kg
9 Kg
13,5 Kg
14 Kg
23 Kg
23 Kg
30 Kg
SSH-10/G114
PFG-114
100 (3)
10
SSH-10/G128
PFG-128
3,7
50 (2)
SSH-25/G114
PFG-114
200 (3)
SSH-25/G128
PFG-128
3,7
90 (3)
130 (3)
180 (3)
SSH-25/G142
PFG-142
5,7
60 (2)
100 (3)
130 (3)
SSH-25/G160
PFG-160
8,5
40 (2)
60 (2)
90 (3)
SSH-25/G174
PFG-174
10,5
30 (2)
50 (2)
70 (2)
SSH-50/G160
PFG-160
8,5
125 (3)
175 (3)
SSH-50/G174
PFG-174
10,5
105 (3)
150 (3)
SSH-50/G187
PFG-187
13
90 (3)
120 (3)
150 (3)
SSH-50/G199
PFG-199
15,2
70 (2)
100 (3)
125 (3)
Motor Mass
25
50
(1) Electric motor is: three phases, 4 poles, closed and ventilated, construction shape B5, V 230/400 - 50/60 Hz (other voltages available on request).
(2) Pressure relief valves type BA-244/0/*M5/100 and manometers type X-MAN-60/100.
(3) Pressure relief valves type BA-244/0/*M5/210 and manometers type X-MAN-60/250.
MAIN COMPONENTS
UNEL size of
electric motor
Coupling
Bell
housing
Suction filter
Return filter
Cartridge of
return filter
Filling cap
SSH-10/G
71
Y-GA-11
Y-LMC1G1
X-FUI-25/125
Y-FAC-30
SSH-25/G
80
Y-GA-21
Y-LMC2G1
X-FUI-25/125
Y-FPF-030/25/V1
SP-PF-030/A25
Y-FAC-70
SSH-25/G
90
Y-GA-41
SSH-50/G
100
Y-LMC4G1
X-FUI-40/125
Y-FPF-100/25/V1
SP-PF-100/A25
Y-FAC-70
SSH-50/G
112
Model
Y-GA-61
DIMENSIONS [mm]
Option /V
reservoir cover with lip
to collect the oil
Model
09/07
SSH-10
200
SSH-25
300
SSH-50
350
Mass (2)
[kg]
100
G
buttonholes
21x11
200
21x11
24
250
21x11
43
260
D (max)
(1)
456
300
340
575
400
445
757
500
STD
OPZ. /V
400
245
500
325
600
430
(1) The dimension refers to the assembly with the standard electric motor in the biggerst size (see section )
(2) The mass refers to the unit without electric motor and without oil.
12
You might also like
- From EverandGas-Engines and Producer-Gas Plants A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil EnginesNo ratings yet
