Painting Specification

PAINTING SPECIFICATION
CPI SEPARATOR FOR MGDP

Document No.: MTDF-BBS-MR-0275-3320-A0106-1001
February 20, 2015

Rev. 1
Page 1 of 4
Table of Contents
1.
PAINT MATERIALS FOR CLIENT APPROVAL ............................................................... 2

Table 1.1. International Manufacturer ....................................................................................... 2
2.
PLANT COLORS AND IDENTIFICATION ......................................................................... 2

Table 2.1. Colors For CPI Separator .......................................................................................... 3
Tabel 2.2. Colors For Safety Identification ................................................................................. 3
Annex B System L1-SS Brand: International Paint ................................................................... 4
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
February 20, 2015

Rev. 1
Page 2 of 4
1. PAINT MATERIALS FOR CLIENT APPROVAL

Materials specified or referenced by manufacturers name and/brand are intended to describe the
type and quality level of material desired and are not intended to be restrictive or to exclude similar
items by other manufacturer. Alternate material require approval from the ENGINEER before being
used. Any approval given by the ENGINEER for alternate materials and/or application methods is
subject to change if the performance of the alternate materials or application method is later found
to be inferior to the specified materials and methods.
Approval is limited to application over surfaces operating at and application conditions less severe
than the conditions stated in the published literature of the paint material manufacturer.
Equipment fabricator shall refer paint supplier product datasheet before applying painting.
Table 1.1. International Manufacturer

Type & Paint
Supplier
Inorganic
Zinc
Silicate
Epoxy
Zinc Rich
Epoxy
Mastic
Acrylic
Urethane
Phenolic
Epoxy
Silicone
Acrylic
Silicone
Alumunium
Epoxy MIO
Carbo Zinc
11
Carbo Zinc
859
Carboguard
890
Carbothane
134 HG
Phenoline
1205
Thermaline
4900
Thermaline
4700
Supplier to
provide
detail to
contractor/
owner
Inter Zinc
22
Inter Zinc
52
Interseal
670 HS
Interthane
990
Interthane
228;
Interline
850
Intertherm
875
Intertherm
50
Dimetcote
9 Series
Amercoat
68 HS
Amerlock
400/2
Amercoat
450 H Series
Amercoat
90 HS
Amercoat
874 HS
Amercoat
878
Supplier
to provide
detail to
contractor/
owner
Supplier
to provide
detail to
contractor/
owner
Carboline
Akzonobel/
International
Paint
PPG
Amercoat
2. PLANT COLORS AND IDENTIFICATION

Painting colors on CPI Separator shall be as per Tabel 2.1.
Structure shall be color coded to warn personnel of potensial physical hazard for safety. Safety
identification color coding shall be in accordance with the Table 2.2.
Except for safety color coding and unless otherwise stated in following tables, the finish colors shall
be light ivory for equipment and structural stell.
1. External Coating for CPI Separator
Annex B System L1-SS Brand:
International Paint
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
February 20, 2015

Rev. 1
Page 3 of 4
Table 2.1. Colors For CPI Separator

Item Name
Surface
Preparation
Priming Coat
Intermediate
Coat
Top Coat
CPI SEPARATOR
Near White
Metal Blast
Cleaning
(SSPC SP 10)
High solid epoxy

Interseal 670 HS
(DFT 125 )
Thinner GTA 220
Mist Coat
Intethane 990
(DFT 30 )
Thinner GTA733
Aliphatic
polyurethane
Interthane 990
(DFT 50 )
Thinner
GTA733
Color
RAL No
Light Gray Min. 175

RAL 7038
Tabel 2.2. Colors For Safety Identification

This table describes the colors required for safety of Operators.
Safety Identification Colors
Item To Be Painted
Color
RAL Code
Dangerous obstructions
Black/Yellow Lines sloped

at 45 minimum 50% of
surface yellow
RAL 9005/1021
Dangerous or exposed parts of

machinery
Alert Orange
RAL 2003
Fire-Fighting equipment
Fire Red
RAL 3000
First aid equipment
Dark Green
RAL 6028
Rigging/Lifting items: Davits,

Lifting beams, overhead traveling
cranes and portal cranes
Static parts Yellow/Black Lines sloped

at 45 minimum 50% of surface yellow
RAL 1021/9005
Moving parts Alert Orange
RAL 2003
Top & Bottom of handrails for

ladders and stairways, where
indicated
Yellow
RAL 1021
Platform Maintenance Deck
Yellow
RAL 1021
Road Marking
White
RAL 9010
Red
RAL 3002
Alert Orange
RAL 2003
Dark Green, White lettering
RAL 6028,
RAL 9010
Identification for Stop and

Danger,e.g. flammable liquid
containers, emergency stop
switches, fire protection equipment
and apparatus
Identification for marking hazardous
parts of machines which may cut,
crush, or other wise injure
Identification for Safety and
location of First Aid, and Safety
Equipment
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
DFT
Micron
February 20, 2015
Annex B System L1-SS Brand: International Paint
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
Rev. 1
Page 4 of 4

Painting Specification

Uploaded by

Copyright:

Available Formats

Painting Specification

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Painting Specification

Uploaded by

Copyright:

Available Formats

PAINTING SPECIFICATION

CPI SEPARATOR FOR MGDP

February 20, 2015

PAINT MATERIALS FOR CLIENT APPROVAL ............................................................... 2

PLANT COLORS AND IDENTIFICATION ......................................................................... 2

Annex B System L1-SS Brand: International Paint ................................................................... 4

February 20, 2015

Document No.: MTDF-BBS-MR-0275-3320-A0106-1001

1. PAINT MATERIALS FOR CLIENT APPROVAL

Table 1.1. International Manufacturer

2. PLANT COLORS AND IDENTIFICATION

February 20, 2015

Document No.: MTDF-BBS-MR-0275-3320-A0106-1001

Table 2.1. Colors For CPI Separator

High solid epoxy

Light Gray Min. 175

Tabel 2.2. Colors For Safety Identification

Black/Yellow Lines sloped

Dangerous or exposed parts of

First aid equipment

Rigging/Lifting items: Davits,

Static parts Yellow/Black Lines sloped

Moving parts Alert Orange

Top & Bottom of handrails for

Platform Maintenance Deck

Dark Green, White lettering

Identification for Stop and

February 20, 2015

Document No.: MTDF-BBS-MR-0275-3320-A0106-1001

Annex B System L1-SS Brand: International Paint

You might also like