Description: NGA Network Graphic Annunciator

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

NGA

Description

NGA Network Graphic Annunciator

The NGA LCD Graphic Annunciator is a powerful, yet


attractive component of the Gamewell-FCI emergency
voice evacuation systems. The bright, back-lit VGA
display is supplemented with an intuitive, easy-to-use
touch-screen interface that provides the following features:
Up to 512 user-defined messages may be configured.
Messages may be up to 77 characters in length.
Display font and color may be selected for each
message.
The NGA mounts in NetSOLO and E3 Series enclosures
or it can be remotely located. It occupies one (1), standard
slot in the cabinet and directly connects to the INI-VGC or
RPT-E3 eliminating the need for a separate ARCNET interface. The NGA occupies one node on the Broadband network.
The back-lit LCD display indicates events stored in the system event log, the status of analog addressable monitor
and control points and provides diagnostic fault codes/
messages.

NGA

Features
Listed under UL Standard 864, 9th Edition

Additional LEDs located on the display panel perimeter


indicate Power On, Alarm, System Trouble, Supervisory
and Ground Fault conditions.

1/4 VGA display multipurpose touchscreen provides


the following options:
- Up to 512 user-defined messages may be configured
- Messages can be up to 77 characters in length
- Display font and color may be selected for each
message
Software programmable touch-screen interface
Mounts in NetSOLO and E3 Series command
center mounting spaces or enclosures
625K baud ARCNET communications
User-friendly design
RS-232 interface

Specifications

Ordering Information

The attractive, state-of-the-art display is user-friendly,


easy-to-read and affords the end-user with the means to
perform numerous functions via the touch-screen feature
which is software programmable. Some switch functions
are: Acknowledge, Signal Silence, Reset, Log Events, and
system maintenance functions.

Operating Voltage:
24 VDC from PM-9 power supply
Operating Current:
0.200 amp.*
Alarm Current:
0.200 amp.
Operating Temperature: 32 to 120 F (0 to 49 C)
Relative Humidity:
0-93% non-condensing at
90 F (32 C)
*Normal operating current. During power failure, current
drops to 0.045 amp, since the back light is extinguished.

Model

Description

1100-0505

Network graphic annunciator

E3 Series and NetSOLO are registered trademarks of Honeywell International Inc.

An ISO 9000-2000 Company


SIGNALING

S1869

FM

MEA

APPROVED

Approved

3025415 231-06-E 7165-0694:268


7165-0694:269

City of
Chicago
Approved
Class 1
Class 2
High Rise

City of
Denver
Approved

GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9020-0598 Rev. i1 page 1 of 1
2007 by Honeywell International Inc. All rights reserved.

You might also like