Scribd Logo
Upload

Welcome to Scribd!

  • 881 views

    Indra-Normarc 7710 0

    Uploaded by

    nemya
    The NORMARC 7710 NAV Analyzer is a portable battery-operated device that is used to adjust, verify, and record parameters of ILS, VOR, and marker beacon ground systems according to international standards. It incorporates functionality to measure carrier frequencies, audio frequencies, modulation depth, RF levels, and phase measurements to test the performance of navigation systems. The user interface includes a graphical display, function keys, and audio jack for monitoring. It can operate for over 6 hours on a charge and connect to external devices via Ethernet or RS-232 interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Indra-Normarc 7710 0

    Uploaded by

    nemya
    881 views2 pages
    The NORMARC 7710 NAV Analyzer is a portable battery-operated device that is used to adjust, verify, and record parameters of ILS, VOR, and marker beacon ground systems according to international standards. It incorporates functionality to measure carrier frequencies, audio frequencies, modulation depth, RF levels, and phase measurements to test the performance of navigation systems. The user interface includes a graphical display, function keys, and audio jack for monitoring. It can operate for over 6 hours on a charge and connect to external devices via Ethernet or RS-232 interfaces.

    Original Title

    Indra-normarc 7710 0

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The NORMARC 7710 NAV Analyzer is a portable battery-operated device that is used to adjust, verify, and record parameters of ILS, VOR, and marker beacon ground systems according to international standards. It incorporates functionality to measure carrier frequencies, audio frequencies, modulation depth, RF levels, and phase measurements to test the performance of navigation systems. The user interface includes a graphical display, function keys, and audio jack for monitoring. It can operate for over 6 hours on a charge and connect to external devices via Ethernet or RS-232 interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    881 views2 pages

    Indra-Normarc 7710 0

    Uploaded by

    nemya
    The NORMARC 7710 NAV Analyzer is a portable battery-operated device that is used to adjust, verify, and record parameters of ILS, VOR, and marker beacon ground systems according to international standards. It incorporates functionality to measure carrier frequencies, audio frequencies, modulation depth, RF levels, and phase measurements to test the performance of navigation systems. The user interface includes a graphical display, function keys, and audio jack for monitoring. It can operate for over 6 hours on a charge and connect to external devices via Ethernet or RS-232 interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AIR TRAFFIC MANAGEMENT

    NORMARC 7710
    NAV Analyzer
    For the perfect touchdown

    The NORMARC 7710 NAV Analyzer is used


    to adjust, verify and record parameters of
    ILS (Localizer, Glide Path, Marker Beacon)
    and VOR ground systems according
    to ICAO 8071. The NAV Analyzers
    functionality substitutes instruments like
    ILS/VOR receivers, modulation meters and
    frequency counters. It incorporates all ILS
    and VOR channels selectable without any
    tuning or equipment changes. Facilitates
    measurement of
    1. C
     arrier and Audio frequencies,
    Modulation Depth (DDM and SDM), RF
    level and Ident/Voice
    2. P
     hase measurements of 30Hz tones for
    bearing information of VOR
    The NAV Analyzer is a portable, batteryoperated weatherproof unit to be used
    outdoors, in a vehicle or inside the
    equipment shelter. It is supplied with a
    dipole antenna with a unipod support and
    coaxial cable. The analyzer has a rough
    outdoor design and is protected against
    damage during transport.

    The NAV Analyzer is based on a


    microprocessor/controller architecture
    and digital signal processing with storage
    functions. Full control from a remote
    system by use of network technology is
    possible.

    The user interface is a graphical display


    (GUI) with function keys. Night conditions
    is supported. Audio jack for Identity/Voice
    monitoring is incorporated.

    FACILITY FEATURES
    1. Low weight and small size
    2. More than 6 hours operation from fully charged condition
    3. Charging from 10.8-30V DC source directly or 110-240V using
    external adaptor
    4. Automatic tuning to the input signal
    5. User named measuring points/sequences and selectable measurement intervals/rates
    6. Auxiliary connector for external event button
    7. Dual-band antenna
    8. Performance analyzes of ILS Localizer, Glide Path, Marker Beacon and VOR
    9. Supports CAT III ILS Localizer in accordance with ICAO 8071
    10. A
     ll controls and measurements available through external interfaces
    11. R
     S-232 or Ethernet interface for data access via personal computer
    12. D
     ata storage capacity for minimum 1 hour of continuous measurements

    Prameters

    Localizer

    Glide Path

    VOR

    Marker Beacon

    Frequency range

    108.1-111.95 MHz

    328.6-335.4 MHz

    108.0-118 MHz

    75 MHz

    Channel spacing

    50 kHz

    150 kHz

    50 kHz

    Frequency tolerance

    0.0004%

    0.0004%

    0.0004%

    0.0004%

    RF level range

    0 dBm to -80 dBm

    10 dBm to -70 dBm

    0 dBm to -80 dBm

    0 dBm to -50 dBm

    DDM range

    0-40%

    0-80%

    DDM/Bearing error

    Centring: 0.07% DDM

    Centring: 0.15% DDM

    0.3

    SDM/Mod. depth range

    0-95%

    0-95%

    10-50%

    80-100%

    SDM/Mod depth error

    0.5% SDM

    1% SDM

    0.5% Mod depth

    0.5% Mod depth

    Ident/Voice freq. range

    300-3000 Hz

    300-3000 Hz

    300-3000 Hz

    Ident/Voice depth of
    modulation range

    1-55%

    1-55%

    Ident depth of
    modulation error

    1% mod. depth

    1% mod. depth

    Input connectors

    BNC female

    Output connector

    Ident/Voice audio-jack
    Aux. Connector for Event button etc.
    Ethernet connector
    RS-232 connector

    User Interface

     raphical colour 5.5 LCD


    G
    Keys for selecting functions and parameters

    Power supplies

    NiMH rechargeable battery, (min. 6 hours use)


    External charger, 110-240V AC

    Power input

    10.8VDC to 30VDC

    Dimensions (WxHxD)

    240 x 160 x 140 mm

    Weight

    4.5 kg

    Antenna type

    Dipole, telescopic

    Antenna mast height

    2.9 m (1.6 m retracted) with level

    Antenna cable

    RG-223, 4 m

    Temperature range

    -10C to +50C

    Protection

    IP54

    Indra Navia AS (head office)


    Olaf Helsets vei 6
    P.O. Box 150 Oppsal
    NO-0619 Oslo, Norway
    T: (+47) 23 18 02 00
    F: (+47) 23 18 02 10
    [email protected]
    www.indracompany.com

    Indra Navia AS
    Bromsveien 17
    P.O. Box 145
    NO-3191 Horten, Norway
    T (+47) 23 18 02 00
    F (+47) 23 12 37 20
    [email protected]
    www.indracompany.com

    Indra reserves the right to


    modify these specifications
    without prior notice.

    You might also like