DSP Objective Questions
Uploaded by
shankarDSP Objective Questions
Uploaded by
shankarKONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY
NAMAKKAL- TRICHY MAIN ROAD, THOTTIAM
DEPARTMENT OF ECE
V SEMESTER
OBJECTIVE EXAMINATION I
EC 2302 DIGITAL SIGNAL PROCESSING
Name of the candidate:
Register Number:
Date:
1.
a.
b.
c.
d.
Time: 30 Minutes
Maximum Marks: 20 x 1 = 20
DFT stands as:
Discrete Fourier transform
digital function transform
digital frequency transform
none
2. Calculate DFT of x (n) = {1, 0, 1, 0}.
a. x (k) = {2, 0, 2, 0}
b. x (k) = {1, 0, 1, 0}
c. x (k) = {2, 0, 1, 0}
d. none
3. The FFT algorithms:
a. Eliminate the redundant calculation and enable to analyze the spectral properties of a signal.
b. Enable the redundant calculation and redundant to analyze the spectral properties of a signal.
c. a & b
d. none
4. Drawbacks of DSP is
a. Digital processing needs A/D and D/A converters and associated reconstruction filters
b. high cost
c. No reliable
d.none of above
5. Application of DSP:
a. Military
b. telecommunication
c. consumer electronics
d. all of above
6. IIR filters
a) Use feedback
b) Are sometimes called recursive filters
c) Can oscillate if not properly designed
d) all of the above
7. This frequency response graph is for a
a)
b)
c)
d)
Low pass filter
High pass filter
Band pass filter
Band stop filter
8. Which of the following is used to alter FIR filter coefficients so they smoothly approach
zero at both ends?
a) rectangular window
b) Blackman window
c) Laplace window
d)Hilbert window
9. The letter C below indicates the filter
a)
b)
c)
d)
stopband
passband
transition band
ripple
10. The basic process that's going on inside a DSP chip is
a) quantization
b) MAC
c) logarithmic transformation
d) vector calculations
a)
b)
c)
d)
11.For the rectangular window function, the first side lobe will be __________ dB down the
peak of the main lobe.
12 dB
11 dB
13 dB
14 dB
a)
b)
c)
d)
12. For the hamming window function, the peak of the first side lobe will be at __________ dB.
-40 dB
-48 dB
-43 dB
-45 dB
a)
b)
c)
d)
13. For the Hanning window function, the width of the main lobe is approximately (here M is the
length of the filter)
8*pi*M
pi/8M
pi*M/8
8*pi/M
14. What is a delay?
a. Delay a copy of the output signal (by x number of samples), and combine it with the new input
signal.
b. Delay a copy of the input signal (by x number of samples), and combine it with the new output
signal.
c. a & b
d. none of above
15. What is FIR filter?
a. FIR filters are finite there is a specific limit to the number of times that any delayed sample is
added to a new input sample.
b. FIR filters are finite there is a specific limit to the number of times that any delayed sample is
added to a new output sample.
c. a & b
d. none of above
16. FIR filters have ., and IIR filters have .
a. Zeros, poles & zeros
b. poles & zeros, Zeros
c. Zeros, zeros
d. none of above
17.How to define IIR filters term as infinite:
a. As with any feedback device, create a loop, hence the term infinite.
b. As with any non-feedback device, create a loop, hence the term infinite.
c. As with any feedback device, create a open loop, hence the term infinite.
d. None of above
a)
b)
c)
d)
18.For the rectangular window function, the roll-off will be __________ dB/decade.
25 dB
20 dB
15 dB
10 dB
a)
b)
c)
d)
19.For the hamming window function, the peak of the first side lobe will be at __________ dB.
-58 dB
-48 dB
-45 dB
-43 dB
20. The inverse Fourier transform
a) converts from the frequency domain to the time domain
b) converts from the time domain to the frequency domain
c) converts from the phasor domain to the magnitude domain
d) is used to make real-time spectrum analyzers
Staff In charge
10
11
12
13
14
15
16
17
18
HOD/ECE
19
20
