Scribd
Upload
55 views2 pages

Evaluation of Steel Mesh, Steel Fibre and High-Performance Polypropylene Fibre Reinforced Shotcrete in Panel Test

The study experimentally investigated steel mesh, steel fiber, and high-performance polypropylene fiber reinforced shotcrete panels to evaluate their toughness, flexural ductility, energy absorption, and load capacity. Testing found that all reinforcements, including polypropylene fibers, greatly improved the shotcrete's properties. A hybrid of polypropylene and steel fibers showed positive synergistic effects and can alternatively reinforce shotcrete.

Uploaded by

Tarun Syal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views2 pages

Evaluation of Steel Mesh, Steel Fibre and High-Performance Polypropylene Fibre Reinforced Shotcrete in Panel Test

The study experimentally investigated steel mesh, steel fiber, and high-performance polypropylene fiber reinforced shotcrete panels to evaluate their toughness, flexural ductility, energy absorption, and load capacity. Testing found that all reinforcements, including polypropylene fibers, greatly improved the shotcrete's properties. A hybrid of polypropylene and steel fibers showed positive synergistic effects and can alternatively reinforce shotcrete.

Uploaded by

Tarun Syal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

evaluation of steel mesh, steel fibre and highperformance polypropylene fibre reinforced

shotcrete in panel test


Abstract

In this study, experimental investigations were performed on steel mesh (SM), steel
fibre (SF) and high-performance polypropylene fibre (HPPF) reinforced shotcrete
(HPPFRS) panels to evaluate performance characteristics such as toughness,
flexural ductility, energy absorption and load capacity. The panel tests, in
accordance with European specification for sprayed concrete (EFNARC), were
made on 18 prismatic specimens having the same mix designs and were cured for
28 days but reinforced with various fibres. In addition, the rebound characteristics
of these mixes were determined to compare the actual in situ fibre contents.
Test results show that all reinforcements, including HPPFs that are low-modulus
fibres, greatly improved the flexural ductility, toughness, and load-carrying
capacity of the brittle matrix. It was seen that there was a positive synergy effect
between steel and polypropylene fibre in hybrid fibre usage from a performance
point of view. According to results, it can be concluded that a hybrid
polypropylene-SF can be used alternatively instead of SM and monosteel fibre as a
reinforcement in shotcrete applications to get better efficiency in mechanical
properties of composite.
Keywords
Concrete;
Composite;
Fibre reinforcement;
Fracture toughness;
Panel test

Abstractly
In this study, experimental investigations were performed on steel mesh (SM), steel fibre (SF)
and high-performance polypropylene fibre (HPPF) reinforced shotcrete (HPPFRS) panels to
evaluate performance characteristics such as toughness, flexural ductility, energy absorption and
load capacity. The panel tests, in accordance with European specification for sprayed concrete
(EFNARC), were made on 18 prismatic specimens having the same mix designs and were cured
for 28 days but reinforced with various fibres. In addition, the rebound characteristics of these
mixes were determined to compare the actual in situ fibre contents.Test results show that all
reinforcements, including HPPFs that are low-modulus fibres, greatly improved the flexural
ductility, toughness, and load-carrying capacity of the brittle matrix. It was seen that there was a
positive synergy effect between steel and polypropylene fibre in hybrid fibre usage from a
performance point of view. According to results, it can be concluded that a hybrid
polypropylene-SF can be used alternatively instead of SM and monosteel fibre as a
reinforcement in shotcrete applications to get better efficiency in mechanical properties of
composite.

You might also like