Scribd
Upload
351 views2 pages

Elasticity Paper 1

This document contains 25 multiple choice questions about elasticity. It covers topics like Young's modulus, bulk modulus, stress, strain, tensile stress, compressive stress, elastic potential energy, Hooke's law, and relationships between stress, strain, elastic modulus, and material properties. The questions require calculations and applying concepts of elasticity to determine things like stress in a wire, extension of wires, work done when stretching wires, and effects of changing dimensions, loads, and materials on elastic properties.

Uploaded by

Shivam Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
351 views2 pages

Elasticity Paper 1

This document contains 25 multiple choice questions about elasticity. It covers topics like Young's modulus, bulk modulus, stress, strain, tensile stress, compressive stress, elastic potential energy, Hooke's law, and relationships between stress, strain, elastic modulus, and material properties. The questions require calculations and applying concepts of elasticity to determine things like stress in a wire, extension of wires, work done when stretching wires, and effects of changing dimensions, loads, and materials on elastic properties.

Uploaded by

Shivam Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Published by: www.questionpapers.net.

in

ELASTICITY
Questions on Elasticity, Paper 1

2.

3.

4.

5.

If the work done in stretching a wire by 1 mm is 2


J, the work necessary for stretching another wire
of the same material but with double the radius of
cross-section and half the length by 1 mm is in
joules (EAMCET 91)
(a) 16
(b)
8
1
(c) 4
(d)
4
Answer: (a)
To compress a liquid by 10% of its original
volume, the pressure required is 2 105 N/m2.
the bulk modulus of the liquid is
(b)
2 105 N/m2
(a) 2 104 N/m2
7
2
(c) 2 10 N/m
(d)
2 106 N/m2
Answer: (d)
The modulus of elasticity is dimensionally
equivalent to
(a) Strain
(b)
Stress
(c) Surface tension
(d)
Poissons ratio
Answer: (b)
If by applying a force, the shape of a body is
changed, then the corresponding stress is known
as
(a) Tensile stress
(b)
Bulk stress
(c) Shearing stress
(d)
Compressive stress
Answer: (c)
When the tension in a metal wire is T1, its length is
L1 and when the tension is T2, its length is L2. its
unscratched length is
(a)

L1 + L 2
2

(b)

T2L1
T2

(c)

L1L 2
2

(d)

L1 T2 + L 2 T1
T1 + T2

T1L 2
T1

Answer: (b)

6.

A solid sphere of radius R made of a material of


bulk modulus K is completely immersed in a liquid
in a cylindrical container. A mass less piston of
area A floats on the surface of the liquid. When a
mass M is placed on the piston to compress the
liquid, the fractional change in the radius of the
dR
sphere,
is given by
R
(IIT 88)

(a)

Mg
KA

(b)

Mg
2KA

(c)

Mg
3K A

(d)

Mg
4KA

Answer: (c)

7.

www.questionpapers.net.in

1.

8.

A body of mass 500 g is fastened to one end of a


steel wire of length 2 m and area of cross-section
2 mm2. if the breaking stress of he wire is 1.25
107 N/m2, then the maximum angular velocity with
which the body can be rotated in a horizontal
circle is
(a) 2 rad/s
(b)
3 rad/s
(c) 4 rad/s
(d)
5 rad/s
Answer: (d)
A copper wire and a steel wire having the same
cross-section area are fastened end to end
stretched by a force F. the lengths of copper and
steel wires are in the ratio of 2:1 and their moduli
of elasticity are in the ratio of 1:2. What is the
e
ratio ( c ) of their extensions?
es
(a)

1:2

(b)

4:1

(c)

2:1

(d)

1:4

Answer: (b)

9.

The bulk modulus of a gas is 6 103 N/m2. the


additional pressure needed to reduce the volume
of the gas by 10% is
(a)

300 N/m2

(b)

400 N/m2

(c)

1000 N/m2

(d)

600 N/m2

Answer: (d)

10.

According to Horkes law of elasticity, within elastic


limits, if the stress is increased, the ratio of stress
to strain
(a)

Increases

(b)

Decreases

(c)

Becomes zero

(d)

Remains constant

Answer: (d)

11.

Two wires have the same material and length, but


their masses are in the ration of 4:3. If they are
stretched by the same force, their elongations will
be in the ratio of
(a)

2:3

(b)

3:4

(c)

4:3

(d)

9:16

Answer: (b)

12.

The symbols, Y, K and represent the Youngs


modulus, bulk modulus and rigidity modulus of the
material of a body. If 3K, then
(a)

Y 2.5K

(b)

Y 3.5K

(c)

Y 4.5K

(d)

Y=

Answer: (c)

9
K
5

Published by: www.questionpapers.net.in

ELASTICITY
The energy stored per init volume of a strained
wire is
(MHT-CET-1999)
1
(a)
load extension
2
1
y
(b)
2 strain2
1
2
y strain
2
(d) stress strain
Answer: (c)
A wire suspended vertically from one of its ends is
stretched by attaching a weight of 100N to its
lower end. What is the elastic potential energy
stored in the wire, if the weight stretches the wire
by 1.5 mm?
(b)
103 J
(a) 5 102 J
3
(d)
7.5 102 J
(c) 2.5 10 J
Answer: (d)
One end of a steel wire of area of cross-section 3
mm2 is attached to the ceiling of an elevator
moving up with an acceleration of 2.2 m/s2. if a
load of 8 kg is attached at its free end, then the
stress developed in the wire will be
(b)
16 106 N/m2
(a) 8 106 N/m2
6
2
(d)
32 106 N/m2
(c) 20 10 N/m
Answer: (d)
A body of mass 1 kg is attached to one end of a
wire and rotated in horizontal circle of diameter 40
cm with a constant speed of 2 m/s. what is the
area of cross-section of the wire if the stress
developed in the wire is 5 106 N/m2?
(b)
3 mm2
(a) 2 mm2
2
(d)
5 mm2
(c) 4 mm
Answer: (c)
A rubber cord of cross sectional area 1 mm2 and
unstretched length 10 cm is stretched to 12 cm
and then released to project a stone of mass 5
gram.
If Y for rubber 5 108N/m2, then the tension in
the rubber cord is
(a) 25 N
(b)
50 N
(c) 100 N
(d)
200 N
Answer: (c)
A wire of length L and cross-sectional area A is
mad of a material of Youngs modulus Y. if the
wire is stretched by an amount x then work done
is (MP PMT 87, 88)
1
F L
(a) F x
(b)
2
1 YA 2
YA
(c)
x
(d)
x
2 L
L
Answer: (c)

(c)

14.

15.

16.

17.

18.

19.

www.questionpapers.net.in

13.

20.

21.

22.

The following four wires of length L and the radius


r are made of same material. Which of these will
have the largest extension when the same tension
is applied. (CPMT 90)
(a) L = 50 cm, r = 0.25 mm
(b) L = 100 cm, r = 0.5 mm
(c) L = 200 cm, r = 1 mm
(d) L = 3000 cm, r = 1.5 mm
Answer: (d)
In an experiment to determine the Youngs
modulus of the material of a wire, the length of
the wire and the suspended mass are doubled.
Then the Youngs modulus of the wire
(a) Becomes double (b)
Becomes four time
(c) Remain unchanged(d)
Becomes half
Answer: (c)
Which one of he following does not affect the
elasticity of a substance?
(a) Hammering
(b) Adding impurity in the substance
(c) Changing the dimensions
(d) Change of temperature
Answer: (c)
Strain energy per unit volume is given by
(MHT-CET-2003)
(a)

24.

25.

(b)

1
2
stress y
2
1
F l
2

1 strain

(d)
2 stress
Answer: (a)
The compressibility of water is 4 105 per unit
atmospheric pressure. 100cc of water is subjected
to a change of pressure of 100 atmospheres. The
change in the volume will be (MPT MP 90)
(b)
4 102 cc
(a) 4 105 cc
(d)
4 101 cc
(c) 4 104 cc
Answer: (d)
The bulk modulus of a fluid is inversely
proportional to the
(a) Change in pressure(b) Volume of the fluid
(c) Density of the fluid (d) Change in its volume
Answer: (d)
Under the action of load F1, the length of a string
is L1 and that under F2, is L2. the original length of
the wire is (MHT-CET-2007)
(a) [L1F1 L2F2] / [F1 F2]
(b) [L1F2 L2F1] / [F1 F2]
(c) [L1F2 L2F1] / [F2 F1]
(d) [L1F2 L2F1] / [F1 F2]
Answer: (c)

(c)
23.

1 (stress )2

2
y

You might also like