Mics KERYS

FEATURE

MAN-MACHINE INTERFACE

KER/GB-2004/1

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

KERYS

Building on the experience acquired with the MICS Process I and II, of which over 10,000 units have been installed worldwide, SDMO has designed
the Mics KERYS. This innovative, user-friendly and intuitive monitoring-control system offers a broad range of features. It is fitted as standard on all generator
units designed for coupling applications and can be optionally fitted on all our other applications. The Mics KERYS can be directly integrated onto the generator,
or provided in a separate cabinet, in order to meet all low or medium voltage power plant constraints.

Automatic generator control

Generator alone or plant
HV or LV operation
Normal/Backup operation
Fugitive or permanent cut-free
network coupling operation :
- on network return,
- on peak limiting,
- during tests.
Inverted backup operation
Power production plant
Cogeneration

Control screen

Mechanical - Temperatures,
- Pressures and levels
according to motor configuration.
Electrical

- Voltages,
- Currents,
- Frequency and energies,
- Power factors,
- Powers,
- Mechanical and
electrical metering.

Synchro screen

Protective devices
Mechanical - Speed,
- Alarms,
- Motor safety devices,
- Specific customer
requirements.
Electrical

Measurements and displays

- Currents,
- Voltages,
- Powers,
- Frequency,
- Microbus.

On-board Web site

User-friendly man/machine interface
5 resident languages (French, English,
Spanish, Portuguese, German) of which
one interchangeable
(contact us for details)
Ethernet port
Dialogue with all motors fitted
with on-board electronics (ECU)
Mod Bus RTU port
RS232 port

Graph display

Controls
Mechanical - Speed,
- Synchronisation,
- Coupling,
- Generator or network
active power distribution
or lock-out,
- Wattmetric programming.
Electrical

- Voltage,
- Voltage equalisation,
- Generator or network
reactive power distribution
or lock-out,
- Generator or network power
factor regulation (cos Phi).

Other physical quantities...

Mics KERYS touch screen

console on 2000 kVA generator set

Communication

Monitoring-control cabinet
2 x 2000 KVA

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

SUPERVISION

COMMUNICATION

PRODUCT PLUS POINTS

KERYS

The Mics KERYS is available with two different Man-Machine Interfaces (MMIs): the standard version possesses a monochromatic screen with LEDs
and function keyboard, the top of the range version possesses a colour touch screen.

Man mode selection

Elements common to both MMIs

Stop mode selection

Control keypad

Auto mode selection

with display LED

Close GE circuit breaker

Open GE circuit breaker
Activate test (no load or on-load)

Close network circuit breaker

Open network circuit breaker
Deactivate test

Erase anomalies
Stop horn
LED test

Move up
Move left
Validate/output

Configuration keypad
For configuration, navigation
and direct access to screens

Specific elements

Control keypad
with display LED

Move right
Move down

Display screen
LCD standard
Monochrome graphical display
Dimensions 114 x 64 mm

Alarm and fault LEDs

Water temperature fault
Oil pressure fault
Battery voltage fault
Fault summary
Alarm summary

Functions keypad
Display screen
TFT LCD screen 16/9me
Colour graphical display
Touch screen
Dimensions 154 x 86 mm

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

KERYS

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

Mics Kerys modularity

Kerys

Man/Machine interface
Kerys tactil

Binary input/output modules

or

Analogue input modules

Base module
- Automatic
controls
- Configuration
- Communication
- Logical and analogue I/O

Analogue output modules

External connexions
Series 232/485
Ethernet

Temperature input modules

Protection and
measurements module

Control and
measurements module

Use of the measurement and protection modules and of the measurement and control modules according
to application configuration.

Protections available* (ANSI codes)

CURRENT

VOLTAGE

FREQUENCY

ACTIVE AND REACTIVE POWER

INSULATION CONTROL

UNCOUPLING / MICROCUTS

Overload (50) - Short circuit (50/51) - Phase current direction indicator (67) - Neutral current (four-pole) (50)
Inverse component (50) - Voltage carry over (51V) - Thermal image (49)

Voltage minimum (27) - Voltage maximum (59) - Presence and absence of voltage (27)

Frequency minimum (81) - Frequency maximum (81)

Active power maximum (32) - Active power return (32P) - Reactive power return (40)
Loss of excitation (40)

Homopolar current (51N) - Homopolar current direction indicator (67N)

Homopolar voltage (64) - Restricted earth (64 REF)

Vector jump (78) - Impedance minimum (21) - Frequency variation dF/dt (78)
* All protection systems are available within the measurement and protection modules,
only some of these systems are available in the measurement and control modules (contact us for details).

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

KERYS

Main applications
Single generating set
Generator sets plant
Fugitive or permanent network coupling
Power production plant (up to 15 generator sets)
Cogeneration
Possibility of successive coupling to 5 networks

Speed control with all motor types

Voltage control with all AC generator types

Manual or automatic synchronisation

phasing
frequency equalisation
voltage equalisation

Control
Dual frequency
Multi-voltage
Voltage setpoint adjustment
Frequency setpoint adjustment

Voltage

Active and reactive power

. setting a setpoint value

. manual value adjustment
. multi-voltage

. setting a setpoint value

. manual power adjustment
. manual or automatic distribution
. power build-up ramp
and load sheeding ramp
(value and time)

Speed/Frequency
. setting a setpoint value
. manual value adjustment
. dual frequency

Measurements and display

Synchro measurements

Other

global and phase-based

active power
global and phase-based
reactive power
global and phase-based
power factor

phase deviation
voltage deviation
frequency deviation

active energy coupling

reactive energy metering
U and I harmonics
mains loss detection
generator set and network
rotational field control

Operation
measurements analysis with log plots and data archiving, used for diagnostic and maintenance assistance

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

KERYS

Example applications

MMI GENERATOR 1

MODEM

MMI PLANT

MMI GENERATOR 2

REMOTE PC

PRINTER

RTC

ROUTER MODEM

LOCAL PC

ETHERNET NETWORK

ETHERNET NETWORK

SWITCH / HUB

Plant base module

GENERATOR 1

RS 485

Bus
CAN

GENERATOR 1
6

Plant base
module

RS 485

Bus
CAN

Bus
CAN

Plant base module

GENERATOR 2

Measurements and
control module

Measurements and
control module

Measurements and
control module

Measurements and
protection module

Measurements and
protection module

Measurements and
protection module

EXAMPLE OF COMMUNICATION REPRESENTATION

WITH REMOTE MAINTENANCE AND SUPERVISION

GENERATOR 2

FEATURE

MICS

MAN-MACHINE INTERFACE

MODULARITY / PROTECTION

MEASUREMENTS / CONTROL

ARCHITECTURE

COMMUNICATION

PRODUCT PLUS POINTS

KERYS

Internal and externat communication

CAN BUS LINK
The CAN (Controller Area Network) bus, broadly used in the motor and general industry, is a tried and tested
technology, providing a high degree of electromagnetic immunity and simplified implementation, connected by simple
shielded pair. There are numerous protocols, they are of the proprietary type, or comply with a specific standard.
The KERYS Mics use 3 types of protocol: a protocol for system-internal operation, the CAN OPEN protocol
and the J1939 CAN protocol.

ETHERNET LINK
Ethernet is a high speed local network capable of connecting a great number of systems of different types.
The KERYS and KERYS Tactil Mics use this type of link for connecting the base module to the MMI as it allows :
rapid transmission of user data, entered with the keypad, to the base module
information requested by the user to be displayed on-screen
We can then create a network of systems connected by wire double pairs via a computer HUB or switch,
thus allowing simple RJ45 type connections.

WEB site
The KERYS and KERYS Tactil Mics are delivered as standard with a particularly user-friendly On-board web site.
This feature presents a number of advantages. Indeed, it is possible, by launching Internet Explorer on your PC
and connecting to the base modules IP address, to obtain all of the information concerning the operation
of your equipment via the local Ethernet network (Intranet), or from the WEB via a remote modem (Internet).
Connection to the base module through the sites various pages, allows you to :
view, in real time, the electrical or mechanical values
modify the configuration via a customised access code
control the generator set or plant, on condition that certain security conditions are met
Over 60 display screens are available in each of the resident languages.
Whatever the distance separating you from your installation, SDMO rapidly gives you the answer that you expert.

Electrical measurements

Network or bus bar measurements

Mechanical measurements

Harmonics display

Central unit measurement summary

Alarms and faults

SUBSIDIARIES
SDMO ENERGY Ltd
United Kingdom
Tel. +44 (0) 1932 345 777
Fax +44 (0) 1932 350 033

SDMO INDUSTRIES IBERICA

MICS KERYS: PRODUCT PLUS POINTS

Tel. +34 93 586 34 00

Fax +34 93 580 31 36

PLC dedicated to generator set applications

Choice of multiple resident standard configurations

SDMO NV/SA
Belgium
Tel. +32 3 646 04 15
Fax +32 3 646 06 25

Addition of auxiliary logic without the need to use an external tool

Functional module library

Troubleshooting
Validation of protections by simulation

SDMO GENERATING SETS Inc

Variable status display

USA

Troubleshooting guide with keyword search

Tel. +1 305 863 00 12

Assistance and Maintenance

Fax +1 305 863 97 81

Automatic Email transmission on triggering of alarms or faults,

or on maintenance operation requests

SDMO DO BRASIL Ltda

Brazil
Tel. +55 (11) 4053-2700
Fax +55 (11) 4053-2718

Log of actions performed (maintenance or repairs)

Load impact
Improved generator performance on strong load

Plotting and logging of electrical and mechanical parameters

SDMO ARGENTINA

Adjustable sampling and definable criterions for release

Argentina

Compliance with international standards

Tel./Fax +54 114 205 3005

The Kerys and Kerys tactil MICS as a whole, have been thoroughly tested
by independent laboratories (climatic tests, electromagnetic counting,

SDMO ASIA PACIFIC PTE Ltd

Singapore

vibratory tests, etc.).

They are EC, UL and CSA certified.

Tel. +65 6419 3788

Fax +65 6419 3798

BUREAU

ISO 9001

SDMO Algiers
Algeria
Tel. +213 21 92 55 84

SDMO Industries
Sites in France

Fax +213 21 92 47 76
SDMO Industries - 12 bis rue de la Villeneuve - CS 92848 - 29228 Brest Cedex 2 - France
Tl. +33 (0)2 98 41 41 41 - Fax. +33 (0)2 98 41 63 07 - Telex 615 092F - www.sdmo.com
S.A.S au capital de 17 066 520

04-2004 GB KERYS/01 SDMO RCS Brest 548 202 985 - Photos : Getty Images/Photographers Choice - Brendan Beirne/Studio 29
Printer : Calligraphy - All in order to improve still further the quality of its products, SDMO Industries reserves the right to modify any of the specifications indicated in this
catalogue without notice. Non contractual document. Copyright SDMO - Dont throw on the public highway

Spain