Naveed Anwar

Associate Director
ACECOMS
School of Engineering and Technology
AIT, P.O. Box 4, Klong Luang
Pathumthani 12120, THAILAND
e-mail: [email protected]
Ph: (662) 524-5533, 524-5539
Fax: (662) 524-6059
Date of Birth

December 31, 1958

Sex

Male

Nationality

Pakistani

Passport No.

KB 783876

Marital Status

Married, two children

Permanent Address

Darul Rehmat, Norgate Street

Cantt. Road, Sialkot, PAKISTAN
(P.O. BOX 182)
Ph: (92-432) 558971

Professional
Qualifications

Doctor of Engineering, Structural Engineering

Asian Institute of Technology, Bangkok

M. Eng., Structural Engineering

Asian Institute of Technology, Bangkok

B.Sc. Civil Engineering

University of Engineering & Technology, Lahore, Pakistan

Professional Engineer, P.E., Pakistan Engineering Council

Consulting Engineer, C.E., Pakistan Engineering Council

Member, American Concrete Institute (ACI)

Member Association for Computing Machinery (ACM)

Member Computer Society (IEEE)

Member International Association of Bridge and Structural

Engineers (IABSE)

Member, Institute of Engineers Pakistan

Member, New York Academy of Sciences

Listed in International Whos Who of Professionals, 1998

Professional
Affiliations

Languages

CV Naveed Anwar-2007

English : Read, Write, Speak

Urdu :
Read, Write, Speak
Thai :
Speak

1 of 22

Award and Honor

Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during International Seminar on
Graphical Modeling for Structural Analysis and Design and
Detailing and Pushover Analysis for Performance Based
Design of Buildings for being key speaker on title Graphical
Modeling for Structural Analysis, Design and Detailing and
Pushover Analysis for Performance Based Design of
Buildings, dated 18 Oct 2006

Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during International Civil
Engineering Education Congress 2006 and 7th National Civil
Engineering Education Congress 2006 as keynote speaker
on title Visualization Techniques for Innovative Teaching and
Learning, dated 19 Oct 2006

Award of Appreciation from Association of Structural

Engineers of the Philippines Inc, Philippines during ACEE
2006 2nd Asia Conference on Earthquake Engineering as
key speaker on title Seismic Analysis and Design of
Buildings and Effective Modeling and Seismic Design of
Bridge Structures, dated 10-11 March 2006

Award of Appreciation from The Institute of Engineering,

and University of Malaysia Sarawak, Malaysia during
Workshop on Computer Aided Analysis and Design key
speaker on title Finite Element Analysis and Design of RC
Buildings, dated 25-26 May 2005

Award of Appreciation from Mapua Institute of Technology,

Manila, Philippines during International Seminar on
Computations in Civil Engineering as key speaker on title
Computations in Civil Engineering, dated 23 May 2005

Award of Appreciation from Association of Structural

Engineers of the Philippines Inc, Philippines during 11th
ASEP International Convention as speaker on title Integrated
Flexural Design for Serviceability, Strength and Performance,
dated 20-21 May 2005

Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during Regional Seminar in Civil
Engineering Computations as keynote speaker on title in
Civil Engineering Computations, dated 19 May 2005

Award of Appreciation from Civil Engineering Dept. U.E.T.

Lahore, Pakistan during International Seminar on Computer
Aided Analysis and Design of Structures as guest speaker
on title Computer Aided Analysis and Design of Structures,
dated 5 April 2005

Award of Appreciation from Philippine Institute of Civil

Engineers Inc, Cebu, Philippines during Annual General
Membership Meeting as key speaker on title Various
Computer Applications for Civil Engineering, dated 30 for
Civil Engineering, dated 30 September 2004

Award of Appreciation from University of SanJose

Recoletos, Cebu, Philippines during Seminar on Finite
Element Analysis of Structures as key speaker on title Finite
Element Analysis of Structures, dated 29 September 2004

Award of Appreciation from Association of Structural

Engineers of the Philippines Inc, Philippines during
Seminar on Analysis and Design of RC Structural Systems as
key speaker on title Analysis and Design of RC Structural
Systems, dated 25 September 2004

CV Naveed Anwar-2007

2 of 22

CV Naveed Anwar-2007

Award of Appreciation from Association of Structural

Engineers of the Philippines Inc, Philippines during
Seminar on Performance Based Design and Push-Over
Analysis of Buildings as key speaker on title Performance
Based Design and Push-Over Analysis of Buildings, dated
18-19 June 2004

Award of Appreciation from De La Salle University, College

of Engineering, Philippines during International Seminar on
Modeling, Analysis and Design of Bridge Structures as key
speaker on title Modeling, Analysis and Design of Bridge
Structures, dated 22-23 August 2003

Award of Appreciation from De La Salle University, College

of Engineering, Philippines during International Seminar on
Finite Element Analysis of Structures as key speaker on title
Finite Element Analysis of Structures Strengthening and
Retrofitting of Concrete Structures, dated 7-8 March 2003

Award of Appreciation from The Institution of Engineers,

Malaysia during A 2-Day Intensive Course on "Practical
Computer Modeling and Design of High Rise Buildings to
BS8110 from Consulting Engineer's Perspective as key
speaker on title Practical Computer Modeling and Design of
High Rise Buildings to BS8110 from Consulting Engineer's
Perspective, dated 23-24 August 2002

Award of Appreciation from De La Salle University, College

of Engineering, Philippines during International Seminar on
"Advanced Integrated Analysis and Design of Tall Buildings"
as key speaker on title Advanced Integrated Analysis and
Design of Tall Buildings, dated 4-5 June 2002

Award of Appreciation from University of Engineering and

Technology, Lahore, Pakistan during International Seminar
on Computer Aided Analysis and Design as key speaker on
title Computer Aided Analysis and Design, dated 1-2 August
2002

Award of Appreciation from NED University of Engineering

and Technology, Karachi, Pakistan during International
Seminar on Computer Aided Analysis and Design as key
speaker on title Computer Aided Analysis and Design, dated
18-19 January 2002

Award of Appreciation from The Institution of Engineers,

Malaysia during Seminar on Computer Aided Analysis and
Design of Concrete Structures as key speaker on title
Computer Aided Analysis and Design of Concrete Structures,
dated 9-10 May 2001

Award of Appreciation from Baguio Colleges Foundation,

Baguio, Philippines during International Workshop on
Integrated Analysis and Design of Buildings in 3D as key
speaker on title Integrated Analysis and Design of Buildings
in 3D, dated 21-22 November 2001

Award of Appreciation from Cor Jesu College, Digos, Davao

Del Sur and Philippine Institute of Civil Engineers,
Philippines during PICE-IBC Mindanao Regional Technical
Seminarin 3D as key speaker on title An Intergrated
Overview of Structural Engineering and Structural Design,
dated 28 April 2001

3 of 22

CV Naveed Anwar-2007

Award of Appreciation from Industry-Academia

Cooperation, Philippines during 4th National Civil
Engineering Education Congress as key speaker on title
Computer Applications in Civil Engineering, dated 2-4 May
2001

Award of Appreciation from Tarumanagara University,

Jakarta, Indonesia during International Workshop on
Structural Analysis and Design of Concrete Structures as key
speaker on title Structural Analysis and Design of Concrete
Structures, dated 13-14 July 2000

Award of Appreciation from Baguio Colleges Foundation

and Philippine Institute of Civil Engineers, Philippines
during International Seminar on Computer Aided Analysis
and Design as guest speaker on title Computer Aided
Analysis and Design, dated 8 August 2000

Award of Appreciation from Cor Jesu College, Digos, Davao

Del Sur and Philippine Institute of Civil Engineers,
Philippines during International Seminar on Computer Aided
Analysis and Design of Structures as key speaker on title
Computer Aided Analysis and Design of Structures, dated 23 August 2000

4 of 22

Research and Publications

Academic Research

Academic Advisory

Paper Reviewed

CV Naveed Anwar-2007

Naveed A., Component-Based Information

Oriented Framework for Integrated Structural
Engineering Applications, AIT Diss no. ST-04-1,
2004, Asian Institute of Technology Bangkok

Naveed A., Effects of Point of Load Application

on the Lateral Instability and Post Buckling
Behavior of Zee and Channel Shaped Beams.
AIT Thesis no. ST-88-3, 1988, Asian Institute of
Technology Bangkok

Naveed A., Use of Micro Computers in Structural

Engineering, B.Sc. Research Project, 1982,
University of Engineering. & Technology,
Lahore

Siriluck B., Seismic Behavior of Steel BeamColumn Connections with Knee Braces AIT
Thesis no.ST-06-03, 2006, Asian Institute of
Technology Bangkok

Danny P., Development of a Software Package

for Deformation Adaptive Mesh Based on
Kringing Interpolation, AIT Thesis no.ST-06-07,
2006, Asian Institute of Technology Bangkok

Sisillia W., Investigation of An Isoparametric

Element Based on Kriging Shape Functions, AIT
Thesis no.ST-06-08, 2006, Asian Institute of
Technology Bangkok

Zeeshan M., An Adaptive Mesh Generation for

Kriging Element Free Galerkin Method Based on
Delaunay Triangulation, AIT Thesis no.ST-0610, 2006, Asian Institute of Technology
Bangkok

Citra W., Dynamic Analysis Using KrigingBased Finite Element Methods, AIT Thesis
no.ST-06-15, 2006, Asian Institute of
Technology Bangkok

Pattira T., Bleeding and Abrasion Resistance of

Mortars Containing Different Pozzolans, AIT
Thesis no.ST-06-01, 2006, Asian Institute of
Technology Bangkok

Nang K. K. O., Risk Approaches For Making

Go/No-Go Decision for Thai Consulting
Engineering Firms/Companies, Masters Thesis,
2006, Asian Institute of Technology Bangkok

Aiping Tang and Aihua Wen, An Intelligent

Simulation System for Earthquake Disaster
Assessment for Journal of Computers &
Geosciences (2007)

Proliferation of the Tallest Building Syndrome:

A Global Prospective for Pakistan Journal of

5 of 22

Engineering & Applied Sciences, 2007

Books

User and Technical

CV Naveed Anwar-2007

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Emerging Trends: Keynote Lectures
and symposia", 2006, Proceeding of EASEC-10
Conference, ISBN 974-8257-22-3.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Analytical and Computational
Methods", 2006, Proceeding of EASEC-10
Conference, ISBN 974-8257-21-5.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Wind and Earthquake Engineering",
2006, Proceeding of EASEC-10 Conference,
ISBN 974-8257-23-1.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Real Structures: Bridges and Tall
Buildings", 2006, Proceeding of EASEC-10
Conference, ISBN 974-8257-17-7.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Construction and Professional
Practices", 2006, Proceeding of EASEC-10
Conference, ISBN 974-8257-20-7.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Materials, Experimentation,
Maintenance and Rehabilitation", 2006,
Proceeding of EASEC-10 Conference, ISBN
974-8257-18-5.

Kanok-Nukulchai W., Munasinghe S. and

Naveed A. "Supplementary Papers", 2006,
Proceeding of EASEC-10 Conference, ISBN
974-8257-25-8.

Naveed A., Column Design Concrete, Steel

and Composite 2004. (Inscription under
progress).

Naveed A., Kanok-Nukulchai W. Bangkok

Bridges 2004. (Inscription under progress).

Naveed A., Computing Methods, Techniques

and Paradigms for Structural Engineering
Software, 2003, Asian Center for Engineering
Computation and Software, (Technical Note).

Naveed A., Selection and Preliminary Design of

Slab Systems, 2003, Asian Center for
Engineering Computation and Software,
(Technical Note).

Naveed A., Buddhi S.S., Handbook for Design

of Steel Members, 2003, Asian Center for
Engineering Computation and Software,
(Technical Note).

Naveed A., Understanding Cross-Sections,

2002, Asian Center for Engineering
Computations and Software, AIT, ISBN 9748208-44-3

Author of Several User and Technical Manuals for

6 of 22

Manuals

engineering software, with a total of over 1000

pages.
Special Seminar & Workshop

Computer Aided Analysis, Design & Detailing of

Foundation and Slab Systems Using SAFE

Seismic Analysis and Design of RC Building

ConPrime-1 Buildings : Modeling-AnalysisDesign

ConPrime-2 Finite Element : Concepts-ModelingApplications

ConPrime-3 Bridges : Modeling-Analysis-Design

Computer Aided Modeling, Analysis & Design of

Offshore Platforms

Software Manuals

Technical Reports

CV Naveed Anwar-2007

BATS 2001: User Manual

BATS 2001: Tutorial Examples

GEAR 2003: User Manual

GEAR 2003: General Tools and Geometric

Properties

GEAR 2003: RC Utilities and RC Members

GEAR 2003: Steel Members

GEAR 2003: Foundations

GEAR 2003: Tutorial Examples

GRASP: User Manual

SYSDesigner: User Manual

Co-author of SYS Steel Designers Manual, a

technical reference, 200 pages

Several Technical Project Reports with total of over

1000 pages

Software Development for Steel Roofing

Systems, for Siam Cement Group of
Companies, Thailand, 2004-2006.

Investigation on Masonry Wall Problems, for

Shinawatra University (Pathumthani Campus),
Thailand, 2006

Investigation of Pile Damage at Siam Kerry

Seaport, for Cunningham Linsey (Thailand)
Ltd., Thailand, 2005

The second Mekong International Bridge

Construction Project, for McLarens Young
International, Thailand, 2005

Evaluation and Remedial Measure: Factory

Settlement (Oil heating area/chip plant), for
Polyplex (Thailand)Public Co. Ltd., Thailand,

7 of 22

2005

CV Naveed Anwar-2007

Design Review of Precast House, for Siah

Brothers Corporation Berhad, Malaysia, 2004

Wind Effects on Steel Tube Mast for II Airport

Bangkok, for Chue Chin Hua Co., Ltd.,
Thailand, 2004

Evaluation and Remedial Measures for Fire

Damage, for Electrowatt-Ekono (Thailand) Ltd.,
Thailand, 2003

Investigation and Remedial Measures: Floor and

Foundation Problems of ECCO Tannery Factory,
Ayuthaya, for Christiania & Nielsen (Thai)
Public Co., Ltd., Thailand, 2003

Design of Expressway Expansions And Training

of Bridge Engineers, for Expressway and Rapid
Transit Authority (ETA), Thailand, 2003

Structural Design and Architectural Drawings of

Sialkot Chamber's "Display Centre", for The
Sialkot Chamber of Commerce and Industry,
Pakistan, 2003

Requirement of Roof-Truss Designing Program,

for CPAC, Thailand, 2003

BTS Noise Barrier, for Bangkok Mass Transit

System Public Company Ltd., 2003

Strain Measurement in Facade Structural Work,

Terminal Building, Suvarnabhumi Airport, for
ASI Asiatic Co.,Ltd., 2003

Semtokha Rongchu Bridge, for Dept. of Road,

Ministry of Communication Royal Government,
Bhutan, 2002

Ngabi Rongchu Bridge Analysis and Design, for

Dept. of Road, Ministry of Communication
Royal Government, Bhutan, 2002

Investigation and Remedial measure for the

cracks on Cooling Tower RC Beams, for Bowin
Power Company Limited, Thailand, 2002

Analysis and Review of four structures of

cement manufacturing plant, for Unity
Engineering Consultants Co. Ltd., Thailand,
2002

Tesco Lotus, Ladprao, for ACTEC Co. Ltd.,

Thailand, 2002

Development of Web Portal Platform, Asian

Cities On-Line on EnviroNet, for CITYNET,
Japan, 2001-2002

Structural Design of Residential Building-RC

House, for Preuksa Real Estate Co.,Ltd.,
Thailand, 2000

Puna Tsang Chhu Bridge, for Dept of Road,

Ministry of Communication Royal Government,

8 of 22

Bhutan, 2000

CV Naveed Anwar-2007

Stripping Structure, TSL-Polybutadiene Rubber,

Rayong, for Toyo-Thai Corporation Ltd.,
Thailand, 1997

Investigation Into the Usage of Interlocking

Cement Blocks as Load Bearing Walls and
Columns, for Nichada Thani Group of
Companies, Thailand

9 of 22

Teaching and Trainings

Summary

Teaching Courses

Main speaker and resource person in over 100

Seminars and Workshops conducted in 15 countries
and attended by over 3,000 engineers from 20
countries, including; Thailand, Malaysia, Myanmar
Bangladesh, Sri Lanka, Indonesia, Laos, Vietnam,
Philippines, Cambodia, Bhutan, and Nepal.
Applied Computational Methods: Numerical
Technique and Software
Advanced Topics in Bridge Engineering
Computer Methods of Structural Analysis
Tall Buildings
Modeling and Analysis of Bridges

Workshops and Seminars on

Computer Application in
Civil Engineering

ConPrime
Buildings Modeling-Analysis-Design (ConPrime1) at
AIT, Thailand, 1-8 March 2005
Finite Element: Concept Modeling and Applications
(ConPrime2) at AIT, Thailand, 14-22 June 2005
Modeling, Analysis & Design of Bridge Structures
(ConPrime3) at AIT, Thailand, 27 Feb-4 Mar 2005
Customized
Computer Applications in Civil Engineering at
Peshawar, Pakistan, 7 April, 2005
Computer Applications in Civil Engineering at
University of Engineering & Technology, Taxila,
Pakistan, 6 April, 2005
Computer Applications in Civil Engineering at
Lahore, Pakistan, 5 April, 2005
Special Lecture: Computer Aided Analysis & Design
of Structures at Quezon, Iligan, Manila,
Philippines, 2001
IS-CAAD
Modeling, Analysis and Design of Buildings,
Manila, Philippines, 19 March 2007
Effective Modeling, Analysis and Design Using
ETABS, Manila, Philippines, 21 Oct 2006
Graphical Modeling for Structural Analysis, Design
and Detailing, Angeles City, Philippines, 18 Oct
2006
Pushover Analysis for Performance Based Design of
Buildings, Angeles City, Philippines, 18 Oct 2006
Finite Element Analysis and Design of RC
Buildings at Sarawak, Malaysia, 25-26 May 2005
International Seminar Computer Aided Analysis
and Design of Structures at Angeles University
Foundation, Pampanga, Philippines, 19 May,2005
Performance Based Design and Push-over Analysis
of Buildings at Manila and Cebu, Philippines, 2004
Special Presentation on National Meeting on

CV Naveed Anwar-2007

10 of 22

"Structural Analysis" at Yogyakarta, Indonesia,

2004
Innovative Ways of Teaching Civil Engineering,
Cebu, Philippines, 2004
Overview of Computer Aided Modeling, Analysis
and Design of Structures, Cebu, Philippines,2004
Structural Evaluation and Retrofit of Existing
Buildings, AIT, Thailand, 2004
Finite Element Modeling and Analysis of Structures
at AIT, Bangkok, 2004
Computers and Structures Convention at Manila
Philippines, 2003
Integrated Analysis and Design of Tall Buildings at
Dhaka, Bangladesh/Cebu, Philippines, 2003
Modeling, Analysis & Design of Bridge Structures,
Manila Philippines, 2003
Integrated Analysis and Design of Buildings with
Special Emphasis on Design of Shear Wall and Mat
Foundation, Baguio, Philippines, 2003
Computer Aided Analysis & Design of Structures at
Karachi, Pakistan/Bungdung, Indonesia/Lahore,
Pakistan, 2002
Finite Element Analysis of Structures, Dhaka,
Bangladesh, 2002
Integrated Analysis and Design of Tall Buildings at
Manila, Philippines/ Kuala Lampur, Malaysia,
2002
Computer Aided Analysis and Design of Tall
Buildings at Kuala Lumpur, Malaysia, 2002
Advanced Integrated Analysis and Design of Tall
Buildings at Penang, Malaysia/Johor Bahru,
Malaysia/Bangkok, Thailand, 2002
Finite Element Analysis at AIT, Thailand, 2001
Computer Aided Analysis & Design of Structures at
Khonkaen, Thailand/Kuala Lampur, Malaysia,
Surabaya, Indonesia/Lagos, Nigeria/Dhaka,
Bangladesh/Yogyakarta, Indonesia, 2001.
Modeling, Analysis and Design of Segmental Box
Girder Bridges, Phnom Penh, Cambodia, 2001
Modeling and Analysis of Structures in 2D Design
of RC Beams and Columns Integrated Analysis and
Design of Frames and Buildings, Phnom Penh,
Cambodia, 2001
Computer Aided Analysis & Design of Structures at
Saipan, United State/Cebu, Philippines/Manila,
Philippines/ Iligan, Philippines/Vientiane, Lao
PDR/Hanoi, Vietnam/Yangon, Myanmar/Columbo,
Srilank/Phnom Penh, Cambodia/Jakarta,
Indonesia/Davao, Philippines/Baguio,
Philippines/Hochi Minh, Vietnam/Bangkok,
Thailand, 2000
IW-CAAD
Finite Element Analysis and Design using SAP
2000, AIT, Bangkok, Thailand, 28-29 Nov 2006

CV Naveed Anwar-2007

11 of 22

 Real Project Based Hands-on Training on

Structural Design of 27 Story RC Building at
Bangkok, Thailand, 4-6 Oct 2005
Seismic Analysis and Design of RC Buildings
Building at Bangkok, Thailand, 26-28 April 2005
Training for Cebu Associate Center Technical
Support Engineers at AIT, Thailand, 2004
Hands-on Training on Modeling, Analysis and
Design of RC Buildings at AIT, Thailand, 2004
Finite Element Analysis of Structures at AIT,
Thailand, 2004
Computer Aided 3D Modeling, Analysis and Design
of Buildings at Penang, Malaysia, 2004
Computer Aided Analysis and Design of Water
Retaining RC Structure at AIT, Bangkok, 2004
Analysis and Design of Bridges at Moratuwa,
Srilanka, 2004
Finite Element Analysis of Structures at Cebu,
Philippines. 2004
Computer Aided Analysis and Design of Structures
(Advanced level) at Bangkok, Thailand, 2004
Design and Construction of Underground
Structures (Tunnels) at Bangkok, Thailand, 2004
Design, Construction and Maintenance of
Electricity & Telecommunication Towers at
Bangkok, Thailand, 2004
Analysis and Design of Reinforced Concrete,
Prestressed and Steel High Rise Buildings at
Dhaka, Bangladesh, 2004
Design of Floor Slab Systems (RC and PC) at AIT,
Thailand, 2004
Dynamic Analysis and Design of Structures at AIT,
Thailand, 2003
Modeling and Analysis of Offshore Structures at
AIT, Thailand, 2003
Customized Training for Engineers from
Expressway & Rapid Transit Authority of Thailand
at AIT, Thailand, 2003
Computer Aided Analysis and Design of Residential
Houses at AIT, Thailand, 2003
Analysis, Design, Monitoring and Strengthening of
Bridge Structures at Karachi, Pakistan, 2003
Finite Element Analysis of Structures at Kuala
Lampur, Malaysia/AIT, Thailand, 2002
Finite Element Method Using PROKON at South
Africa, 2002
Analysis and Design of Bridge Structures at
Kathmandu, Nepal, 2002
Modeling, Analysis, Design and Construction of
Bridges at AIT, Thailand, 2001
Computer Aided Analysis & Design of Structures at
Kathmandu, Nepal, 2000

CV Naveed Anwar-2007

12 of 22

M/SEAP
Integrated Analysis and Design of Buildings in 3D
at Baguio, Philippines, 2001
3D Building systems at Baguio, Philippines/Hochi
Minh/ Hanoi, Vietnam, 2001
Finite Element Analysis and Design of Structures
at AIT, Thailand, 2001
3D Analysis & Design of Buildings at AIT,
Thailand, 2001
Modeling Analysis and Design of Segmental Box
Girder Bridges at AIT, Thailand, 2000
Finite Element Modeling Analysis of Structures at
AIT, Thailand, 2000
Advanced Finite Element Analysis of Structures at
AIT, Thailand, 1999
Integrated Analysis and Design of Concrete
Structures at AIT, Thailand, 1999
Analysis and Design of Bridge Structures at AIT,
Thailand, 1999
Pre-stressed & Reinforced Concrete Design at AIT,
Thailand, 1997
Computers for analysis & design of structures at
Dhaka, Bangladesh/Columbo, Srilanka, 1996
Finite Element Analysis at AIT, Thailand, 1996
2D Analysis of Structures at AIT, Thailand, 1995
OS-CAAD
Overview of Computer Aided Analysis and Design
of Building at Khon Kaen, Thailand, 29 Jan 2005
Analysis and Design of RC Structural Systems at
Manila, Philippines, 2004
Analysis and Design for Wind, Earthquake, Fire
and Vibrations at Columbo, Srilanka, 2004
Practical Modeling and Analysis of Tall Buildings at
Dhaka, Bangladesh, 2004
Modeling, Analysis, Design and Detailing of Shear
Walls at AIT, Thailand, 2003
Strut and Tie Model for Analysis and Design of RC
Members at AIT, Thailand, 2003
Analysis and Design of Piers and Columns at AIT,
Thailand, 2003
Strengthening and Retrofitting of Concrete
Structures at Dhaka, Bangladesh, 2003
Design of Deep Beams, Brackets and Concrete
Joints at AIT, Thailand, 2002
Strengthening and Retrofitting of Concrete
Structures at AIT, Thailand, 2002
Cost Sensitive Design of Flat Slab Floor Systems at
AIT, Thailand, 2002
Analysis and Design of Mat Foundations at AIT,
Thailand, 2002
Analysis and Design of Shear Walls at AIT,

CV Naveed Anwar-2007

13 of 22

Thailand, 2002
Performance Based Design and Push Over Analysis
at AIT, Thailand, 2002
S-CAAD
Fully Automated Analysis and Design of RC
Frames at AIT, Thailand, 1999
2 Dimensional Analysis of Structures Advanced
Modeling Techniques at AIT, Thailand, 1999
Design of Pilecaps and Foundations at AIT,
Thailand, 1999
3D Analysis of Building Structures at AIT,
Thailand, 1999
Design of Concrete Structures at AIT, Thailand,
1998
Design of Steel Stuctures at AIT, Thailand, 1998
Graphical Analysis of 2D Structures at AIT,
Thailand, 1998
Advanced Analysis and Design of General Slab
Systems, Advance Analysis and Design of Flat Slab
System at AIT, Thailand, 1998
Analysis and Design of Flat Slab Structures at AIT,
Thailand, 1998
Advance Design of RC Beams and Pilecaps at AIT,
Thailand, 1998
Seismic Risk Assessments and Aseismic Design of
Structures at AIT, Thailand, 1998
Computer Aided Analysis and Design of Concrete
Structures at Yangon, Myanmar, 1998
Advance Design of RC Column, Piers and Piles at
AIT, Thailand, 1997
Graphical Analysis of Frames & Trusses Design of
Concrete Section at AIT, Thailand, 1997
Software Development
Object Oriented Programming with Visual Basic at
AIT, Thailand, 1999
Beginning Programming with Visual Basic at AIT,
Thailand, 1998
Computer Programming for Engineering
Applications Using VB at AIT, Thailand, 1998
W-CAAD
Computer Aided Analysis and Design of Structures
for Vibrating Loads at AIT, Thailand, 15-16 Feb
2005

CV Naveed Anwar-2007

14 of 22

Professional Experience: Structural Analysis and Design

Summary

Over twenty years of extensive experience in the

conception, planning, analysis, design and detailing of
multistory buildings, bridges, water retaining structures,
industrial buildings and special structures. Worked on the
structural design of over 500 different projects.

Special Projects

Planning, design and design review of many special

problems including strength evaluation of existing
buildings and bridges, design of transmission towers,
large diameter deep piles, cold formed structures etc.
Development of Software for CPAC Roof System for
CPAC, Thailand (Undergoing)
Jetty Bridge Verification and Modification, PTT
Chemical Ltd. (Public), Thailand (Undergoing)
Structural Review of Factory for Thai Cold Rolled Steel
Sheet (TCRSS), Thailand (Undergoing)
Development of Software for the Automated Planning
and Design of Block Houses for Nichada Thani Group
Thailand, 2006
Structural Analysis, Design Review and Strengthening
of Preheater Tower of Siam City Cement Saraburi Plant
for Unity Engineering Consultants, Thailand, Nov 2006
Investigation on Masonry Wall Problems at
Shinnawatra University, ACTEC Co., Ltd.,Thailand,
Feb 2006.
Evaluation and Remedial Measures for Floor
Settlement Problem for Polyplex Public Co. Ltd.,
Thailand, Dec 2005.
Collapse Investigation of Mukdaharn Bridge, Mclarens
Young Co. Ltd. Thailand, 2005
Investigation of Pile Damage at Kerry Siam Seaport at
Cunningham Lindsey Ltd., Thailand, 2005
Design Review of 16-Story Apartment, Concord
Architects & Engineers Ltd., Bangladesh, 2005
Design Review of Preheater Tower No. 1, Cement Klin
No. 5 Foundation, Raw Mill Foundation and Coal Mill
Foundation at Siam City Cement, Thailand, 2004
Design Review of Precast 5-Story Apartment, for SBC
Corporation Berhad, Malaysia, 2004.
Development of Web Portal Platform for CityNet and
Regional Institute of Environmental Technology, Japan,
2003
Evaluation and Remedial Measures for Slab and
Foundation Problems for ECCO Tannery Co. Ltd.,
Thailand, 2003.
Analysis and Remedial Measures of Wind Effects on
Steel Tube Mast for Suvannabhumi Airport at
Bangkok, Thailand, 2003.
Evaluation and Remedial Measures for Fire Damage at
Electrowatt-Ekono Co. Ltd., Thailand, 2003
Investigation into cracks developed in cooling towers of

CV Naveed Anwar-2007

15 of 22

one of the power plants operated by Bowin in Thailand,

2002.
Structural Evaluation of Lotus at Ladprao, Thailand,
2003
Research on Large Ferrocement Tanks, Thailand, 2002.
Investigation into the failure of Pipe Rack at Rayong
Investigation of design and behavior of Pile caps, for 55
km long, 6 lane over elevated toll way, Bangkok,
Thailand
Investigation into the failure of Roof Truss, Bangkok
Investigation into the Failure of Inlet Pumping Station,
Bangkok Wastewater Project, Thailand
Investigation into Cracking of Beams in Polyester
Fabric Project, Rayong, Thailand
Investigation of Cracks in slabs in Betagro Head Office
Building, Bangkok, Thailand
Investigation of Collapse of Rice Silo at Prachinburi
Investigation of Collapse at Suretex Surat Thani
Design review of Generator Foundations for dynamic
loads at Mabtaput, Thailand
Multistory Buildings

Design of numerous concrete buildings, with a total

covered area of 6.5 million sft (600,000 sqm). Major
projects include;
Trade Center, Lahore, 90,000 sft, flat slab
High Court Building, Abbotabad, 12,000 sft
Afghan Refugee Commissioner, Peshawar, 80,000 sft
Ali Complex, Lahore, 130,000 sft, flat slab
GDA Shopping Plaza, Gujranwala, 180,000 sft
Hayatabad Medical Complex, Peshawar, 250,000 sft
Ayub Medical Complex, Abbotabad, 150,000 sft,
Cardiac Center, Lahore, 100,000 sft, waffle slab
Rawalpindi Municipal Complex, Rawalpindi, 300,000
sft

Bridges

Planning, design and design review of numerous bridges

and highway structures.
Conceptual and detailed design of two major bridges in
Bhutan for the Department of Roads. One with main
arch of 70m span. Total length 200m
Conceptual design of 400m long box girder bridge in
Lagos, Nigeria
Preliminary Cost Analysis and design of viaduct deck
for RAMA VIII Bridge Project (Bid Design)
Preliminary Design of Cross-Frame and substructure
for Daokanong Expressway Project (Bid Design).
Preliminary design of two flyovers for BVJV for BMA
Flyover project in Bangkok
Worked on the planning, design, and review of over 20
canal bridges, 15 flyovers, 6 interchanges, 4 major
river bridges, 350 culverts and other related structures
in Pakistan Motorway, Lahore-Islamabad Section, with

CV Naveed Anwar-2007

16 of 22

DAEWOO Corporation of Korea

Planning and design of 2 flyovers in Lahore, for
Halcrow Fox Associates of United Kingdom. Post
tensioned, segmental box girders
Strength evaluation of Bridge at Tarraki, for National
Highway Board, Pakistan
Water Retaining Structures

Planning and design of several underground and elevated

tanks, and reservoirs.
Murree Water Treatment Plant, 3 million gallons
Several overheat tanks, up to 75,000 gallon capacity
Water reservoirs, Muscat, 2 million gallon capacity
Structural Design Review of Samut Prakan Wastewater
Management Project, Bangkok, Thailand

Industrial Buildings

Planning and design of industrial buildings in concrete

shells, steel trusses, steel frames, and special structural
systems with a total area of nearly 3.5 million sft.
WALLS Ice Cream Factory, for Unilever, Lahore, 10,000
sft, 130 ft span steel trusses, cold sores etc.
Hoechst-Ravi Plasticizers, Resins Complex,
Sheikhupura, Pakistan
L.T. Engineering, Industrial Complex, Wah, Pakistan,
250,000 sft
Hi Tech Feed Mills, Hatchery and Farms, 220,000 sft
Islamabad Hatchery and Farms, 300,000 sft
Big Bird Hatchery and Farms, 180,000 sft
Rex-Barren Batteries, Lahore, 50,000 sft, hypar shells
Sunshine Paper Mills, Lahore, 40,000 sft, heavy
structures
Fastline Pencils Factory, Lahore, 35,000 sft
Pepsi Cola Factory, Hattar, 50,000 sft, concrete shell

CV Naveed Anwar-2007

17 of 22

Software Development
Summary

Nearly seventeen years of extensive experience in

development of software, use of computers in
engineering application, training of professionals, and
computer programming for general usage.

Basic Computer Skills

Hands on experience of working with Personal, Micro,

Mini and Main Frame computers.
Programming ability in Visual C++, VisualBASIC,
VisualBasic .Net, BASIC, FORTRAN, PASCAL and C
languages
Expertise in the use of software packages for
structural analysis and design such as SAP2000,
ETABS, SAFE, STRAND, ROBOT, BATS, GEAR,
MICROFEAPnho
STRESS, SDL-1, AIT, etc.
Extensive use of commercial programs like,
WINDOWS, DOS, ACCESS, MS Word, PowerPoint,
dBASE, AutoCAD, MS Project, Excel, etc.

Software Development

Over fifteen years of experience in the development of

computer programs for engineering applications.
Author of several programs which have been released
for specific and general use. Main author of several
user manuals and technical documentation. Planning,
implementation, coordination and supervision of
software projects carried out by several programmers.

Sole Author
ACECOMS GEAR: This software comprises of
several modules for the assistance in the analysis
and design of structures. Presently 24 modules have
been released and are being used by engineers in
over 20 countries, (released by ACECOMS, AIT).
General Utilities - 5 Modules
Unit Converter
Engineering Constants
Dead Load Reference
Factored Loads
Load Combinations
Geometric Property Calculators - 4 Modules
Triangle Solver
Circle Solver
Polygon Solver
Property Calculator
RC Utilities - 3 Modules
Rebar Calculator
K-Factor Calculator
Moment Magnifier
RC Member Designers - 4 Modules

CV Naveed Anwar-2007

18 of 22

 RC Beam Designer
RC Column Designer
Two-way Slab Designer
Flat Slab Designer
Foundation Analysis Assistant - 4 Modules
Iso-Footing Designer
Pilecap Designer
Combined Footing Designer
Retaining Wall
Steel Member Designers - 3 Modules
Footing Capacity
Static Pile Capacity
Driven Pile Capacity
The SDL-1 Series consisting of six individual DOS
based programs for the structural analysis, design
and detailing, released by TechnoSoft Computer
Application in association with ACECOMS.
TWSLAB: Analysis and Design of Edge
Supported Slabs
FLATSLAB: Analysis and Design of Flat Slab
Systems
RCBEAM: Analysis and Design of RC Beams
RCCOLUMN: Design of RC Columns for Uniaxial
Loads
ISOFOOT: Design of Isolated Footings
COMBFOOT: Analysis and Design of Combined
Footings
SYS DESIGNER: A Series of programs developed for
the Design of Steel Members for Siam Yamato Steel
Co. Ltd.
Frame2DX: Program for the easy modeling and
analysis of structures in 2D, (released by
ACECOMS).
BUILDCOST: A program for the building cost
estimation and preparation of BOQ, etc.
BridgePad: Software for the design of Bridge
Bearings.

Co-Author
BATS 99 and BATS 2000: A program for three
dimensional analysis of buildings structures. The
main engine written by Prof. Worsak KanokNukulchai, whereas Interface for Windows version
developed by the author.
NichadaCAD: Software for automated design of
interlocking block houses (Developed for Nichada
Thani Group of Companies)
Monier CAD: Software for design of Roof System (
Developed for CPAC, Thailand)

CV Naveed Anwar-2007

19 of 22

Others
CSIDetailer: Software for design of concrete, steel
and composite sections (released by Computers and
Structures Inc., USA).
CSISection Builder: Software for analysis and
design of concrete, steel and composite sections
(released by Computers and Structures Inc., USA).
RISA Section: Software for analysis of general
cross-sections, (released by RISA Technologies,
USA).
CSICOL: Software for the design of slender and
non-slender concrete and composite columns
(released by Computers and Structures Inc., USA).

CV Naveed Anwar-2007

20 of 22

Professional Experience
Jan 2006 to Present
Affiliated Faculty
Sch oo l o f En gineer ing and Tec hn olog y
A s ian I ns t i tu t e o f T ec hn ol og y , Ban gk ok
Dec. 1994 to Present
Associate Director/ General Manager
A s ian C en te r f or Eng in eer in g
Co mp u ta tions and So ftwa re
( AC ECO MS)
Sch oo l o f En gineer ing and Tec hn olog y
A s ian I ns t i tu t e o f T ec hn ol og y , Ban gk ok

Responsible for course coordinator for

Masters level for Structural Engineering and
academic advisor for thesis work of the
Masters and PhD students.

Responsible for the preparation of the

Inception and Startup activities of the Asian
Center for Engineering Computations and
Software at AIT. Involved in planning and
management of publicity, external contacts,
publications, software development,
research and Structural Engineering
Projects, ACECOMS Development,
Management and operations. Continue
Doctoral study in Structural Engineering.

Jan 2007 to Present

Interim Director
Ha bitech Ce n ter
Sch oo l o f En gineer ing and Tec hn olog y
A s ian I ns t i tu t e o f T ec hn ol og y , Ban gk ok
Jan 2007 to Present
Chair of Task Force on AIT Center
Pakistan
Asian Institute of Technology, Bangkok
May 2007 to May 2009
Administrative Program Committee of the
Masters of Engineering in Civil Engineering
Faculty of Gr aduate Stidies
M ah id ol U ni v ers i t y

Responsible establishing AIT Center at

Pakistan.

Set the policy of program management,

control standards of the programs to meet
the academic regulations of Graduate
studies and standards of the Ministry of
Education, fulfill the program management
requirements and give advice to develop the
program, coordinate between related units
such as Faculty of graduate studies, Faculty
of engineering and Department of civil
engineering.

May 2007 to 2009

Scientific Committee, IABSE Symposium
Bangkok, 2009
May 2005 to August 2006
G ene ra l Secr etar y
T he Ten t h E as t As ia P ac i f ic C on f ere nc e
in Struc tura l En gineer in g an d
Co ns truc tio n ( EASEC- 10) h eld on 3-5
Au gus t 2 006 , Ba ngk ok, T ha i lan d
April 1988 to Dec. 1994
Chief Executive/Principal
Na veed Anwa r & Assoc ia tes Laho re
Co nsu l ting En gineers & Arch itec ts .

CV Naveed Anwar-2007

Responsible for the overall planning and

management, coordination, publication of
EASEC-10 conference.

Fully responsible for the complete technical

and business management of the firm,
including conception, detailed design,
construction supervision and management
of engineering and architectural projects of
various nature and size. Responsible for the

21 of 22

development of software for engineering

applications.
Work also involved public dealing,
coordination, business development,
correspondence and personnel
management. Handling all contractual
matters with local clients, international
associates and multi-national organizations.
Sept. 1986 to April 1988
S E C , As ia n I ns t i tu t e of T ec hn o log y

Studied in the Master program in the

Division of Structural Engineering and
Construction

Aug. 1984 to Sept. 1986

Responsible for the structural analysis,

design and detailing of buildings, bridges
and other structures. Independently
completed many projects.

Senior Structural Engineer

Pak is ta n
En vir onmen ta l
and
Ar ch itec t ur al
Cons ul t ants
( PE P A C ) ,
L aho re , Pak is tan .
Jan. 1983 to Aug. 1984
Structural Engineer
Pro gress ive C onsu l tan ts , Lah ore.
Dec. 1980 - Dec. 1982
Student Apprentice Engineer
A r c h i tec t 's A f f i l ia t io n , L aho r e

CV Naveed Anwar-2007

Worked on the structural analysis, design

and detailing of buildings, bridges and other
structures. Part of a team for completing
many design projects.
Worked as an assistant to the Senior
structural engineers and architects.

22 of 22