Scribd
Upload
216 views2 pages

Warmcomm EN PDF

WarmComm 3 is special software for recording process data from laboratory drying ovens and incubators manufactured by BMT. It allows monitoring temperature, humidity, pressure, and illumination regulation in real-time and saving data to files. The software comes in three versions - Basic for unidirectional communication, Professional for bidirectional communication and complex programming, and F, which also meets FDA regulations. WarmComm 3 can connect to BMT devices via RS-232 and be used to track values, create reports, and send status emails.

Uploaded by

Edith HS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
216 views2 pages

Warmcomm EN PDF

WarmComm 3 is special software for recording process data from laboratory drying ovens and incubators manufactured by BMT. It allows monitoring temperature, humidity, pressure, and illumination regulation in real-time and saving data to files. The software comes in three versions - Basic for unidirectional communication, Professional for bidirectional communication and complex programming, and F, which also meets FDA regulations. WarmComm 3 can connect to BMT devices via RS-232 and be used to track values, create reports, and send status emails.

Uploaded by

Edith HS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WarmComm

Special software

for laboratory drying ovens and incubators

protecting human health

www.bmt.cz

Special software WarmComm 3


for laboratory drying ovens and incubators

- Effective way to get your values


WarmComm 3 has been developed for universal use for evaluation of test
and cultivatior processes in BMT heat technology devices.

WarmComm 3 provides highly effective


recording tool for chamber-data storing.
It is designed to record the process data
of temperature regulation and of humidity
regulation in the climatic chambers and record
of pressure values for vacuum ovens and
record of illumination values for devices with
exposure illumination.
WarmComm 3 enables to follow up all
output values measured in the heat technology
devices. It enables to watch the regulation
on-line, to save the regulation process on a
disc file, to review the already created files,
to compile batch reports about current
processes and to send e-mails informing
regularly about the measurement in the
devices and reports of not receiving data.
WarmComm 3 offers possibility to follow up
thevalues of the followed-up parameters on-line,
valuates their long-term development or simply
read values of all measured variables at any
moment during the already running process on the
screen of your PC. The required and actual value
of chamber temperature can be watched parallel.
WarmComm 3 can be easily connected to any
BMT heat technology device through stable RS
232 interface supplied with every device including
in the basic price.
Version WarmComm 3 provides you with
these options:
WarmComm 3 B (Basic): Special software,
unidirectional communication with PC. It does not
allow managing of oven from PC. The software is
intended for recording the temperature regulation
course in the temperature cabinets. The data
acquired during the regulation are displayed
in form of a graph where the horizontal and
vertical axis shows the time and acquired data,
respectively. The program allows regulation
monitoring in real time, saving the regulation
process to a file on a disc, and viewing the
formerly created files. The WarmComm 3.0 Basic
software is an optional equipment of standard and
comfort line.
WarmComm 3 P (Proffessional): Special
software, bidirectional communication with PC.
It allows managing of ovens from PC, complex
programming of all accessible parameters from

PC to control centre and following storage of time


recording process from device to PC. Software
WarmComm 3 P is an optional equipment of
comfort line.
WarmComm 3 F: Bidirectional communication
with PC. It allows managing of ovens from PC,
complex programming of all accessible parameters
from PC to control centre and following storage
of time recording process from device to
PC. Software WarmComm 3 P is an optional
equipment of comfort line. In addition this version
is fully conform with FDA directive 21 CFR
Part 11, it means that programme satisfies high
demands of data security and offers multilevel
user administration.
connection to any common PC type (see
hardware conditions, RS 232 interface)
easy installation
operating system Windows
easy operation
easy change of value-span help to show
even very fine changes of variables, to follow
up long-term or short-term processes on one
screen
on-line following-up of temperature and
humidity conditions in the chamber
easy selection of data export to a printer or PC
via service menu
optional degree of data compressing numerical
or graphical output
number of connected devices depends on the
number of free serial PC ports up to 10
short-term and long-term continual

following-up (depends on the size of your hard


disc)
highly safe process data storing in a multiple
file system
service data monitoring for remote service
diagnostic
Hardware conditions
operating system Windows 2000, XP, Vista, 7
(and older)
CPU min. 400+ Mhz
RAM min. 128 MB (for short-time
measurement of one unit)
maximal length of the connecting cable is
15 m (specified by RS 232 standard)
one-hour-record requires about 200 KB-free
space on the hard disc
one free serial port for each unit to be
watched

http://wc3.bmt.cz
MMM Medcenter Einrichtungen GmbH
Semmelweisstrasse 6
D-82152 Planegg / Mnchen
Tel.: +49 89 8992 2620
Fax.: +49 89 8992 2630
E-mail.: [email protected]

Warmcomm_MMM_PR_02_2011 ver01_EN

You might also like