Process Engineers' Codes & Standards - Prelminary

Publisher
ABSA
AICHE
ANSI
ANSI
ANSI
API A.
API B.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API D.
API E.
API E.
API E.
API F.
API F.01
API F.01
API F.01
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.03
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.06

Code or Standard
Alberta Boilers Safety Association
K61.1 Safety Requirements for the Storage and Handling of Anhydrous Ammonia

Comments
SI units used when provided for in codes
ABSA

@ Interpretations
@ Exploration & Production
@ Petroleum Measurement (Manual of Petroleum Measurement Standards)
Chapter 1, Vocabulary
Chapter 10, Sediment and Water
Chapter 11, Physical Properties Data (Volume Correction Factors)
Chapter 12, Calculation of Petroleum Quantities
Chapter 13, Statistical Aspects of Measuring and Sampling
Chapter 14, Natural Gas Fluids Measurement
Chapter 15, Guidelines for Use of the International System of Units (SI) in the Petroleum and Allied Industries

Chapter 16, Measurement of Hydrocarbon Fluids by Weight or Mass

Chapter 17, Marine Measurement
Chapter 18, Custody Transfer
Chapter 19, Evaporation Loss Measurement
Chapter 2, Tank Calibration
Chapter 20, Allocation Measurement of Oil and Natural Gas
Chapter 21, Flow Measurement Using Electronic Metering Systems
Chapter 3, Tank Gauging
Chapter 4, Proving Systems
Chapter 5, Metering
Chapter 6, Metering Assemblies
Chapter 7, Temperature Determination
Chapter 8, Sampling
Chapter 9, Density Determination
@ Marine Transportation
@ Marketing

meter proving

Publ 1612, Guidance Document for Discharging of Petroleum Distribution Terminal Effluents to Publicly Owned Treatment Works

Publ 1638, Waste Management Practices for Petroleum Marketing Facilities

@ Refining
@ Inspection of Refining Equipment
API 510 Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair & Alteration
API 570 Piping Inspection Code: Inspection, Repair, Alteration & Rerating of In-Service Piping Systems
@ Mechanical Equipment Standards for Refinery Service
API 615, SoundControl of Mechanical Equipment for Refinery Services ???
RP 686, Machinery Installation and Installation Design
Std 610, Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services
Std 611, General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services
Std 612, Special Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services,
Std 616, Gas Turbines for the Petroleum, Chemical and Gas Industry Services
Std 617, Centrifugal Compressors for Petroleum, Chemical and Gas Industry Services
Std 618, Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services
Std 619, Rotary-Type Positive Displacement Compressors for Petroleum, Chemical, and Gas Industry Services
Std 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services
Std 674, Positive Displacement PumpsReciprocating,
Std 675, Positive Displacement PumpsControlled Volume
Std 676, Positive Displacement PumpsRotary
Std 681, Liquid Ring Vacuum Pumps and Compressors
Std 682, Shaft Sealing Systems for Centrifugal and Rotary Pumps
Std 685, Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services
@ Storage Tanks
@ Pressure Relieving Systems for Refinery Service
RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation)
RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation)
RP521 - Guide for Pressure-Relieving & Depressuring Systems
RP576 - Inspection of Pressure Relieving Devices
Std 2000, Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and Refrigerated
Std 526, Flanged Steel Pressure Relief Valves
Std 527, Seat Tightness of Pressure Relief Valves
@ Piping Component Standards
API 574 Inspection Practices for Piping System Components
RP 578, Material Verification Program for New and Existing Alloy Piping Systems
RP 591, User Acceptance of Refinery Valves,
Std 589, Fire Test for Evaluation of Valve Stem Packing
Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged Type
Std 598, Valve Inspection and Testing
Std 599, Metal Plug ValvesFlanged and Welding Ends,
Std 600, Steel Gate ValvesFlanged and Butt-Welding Ends, Bolted and Pressure Seal Bonnets
Std 602, Compact Steel Gate ValvesFlanged, Threaded, Welding, and Extended Body Ends
Std 603, Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
Std 607, Fire Test for Soft-Seated Quarter-Turn Valves
Std 608, Metal Ball ValvesFlanged, Threaded and Butt-Welding Ends
Std 609, Butterfly Valves: Double Flanged, Lug- and Wafer-Type
@ Electrical Installations and Equipment

Rating and rerating qualificatins required

old API610 referred to this-wg

Mag drive and canned pumps

Part II, 1994 - Installation

Also, ASME Sec VIII, B &PV Code

Flare Network dP Calcs?

Also ASME B31.3 and API 570, not CS

2001
Cost

Process Engineers' Codes & Standards - Prelminary

Publisher
API F.06
API F.06
API F.06
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.09
API F.10
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.12
API F.12
API F.12
API F.13
API F.13
API F.13
API F.13
API F.13
API F.13
API F.14
API G.
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.02
API G.02
API G.02
API G.02
API G.02
API G.02
API H.
API H.
API H.
API H.
API H.
API H.
API H.

Code or Standard
RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities
Classified
as Class I, Division
1 and
2
RP 505, Recommended
Practice
for Division
Classification
of Locations for Electrical Installations at Petroleum Facilities
Classified as Class I, Zone 0, Zone 1 and Zone 2
Std 541, Form-Wound Squirrel-Cage Induction Motors250 Horsepower and Larger
@ Heat Transfer Equipment Standards for Refinery Service
Publ 534, Heat Recovery Steam Generators
Publ 535, Burners for Fired Heaters in General Refinery Services
RP 531M, Measurement of Noise from Fired Process Heaters
RP 536, Post Combustion NOx Control for Equipment in General Refinery Services
RP 573, Inspection of Fired Boilers and Heaters
Std 530, Calculation of Heater Tube Thickness in Petroleum Refineries
Std 560, Fired Heaters for General Refinery Services
Std 660, Shell-and-Tube Heat Exchangers for General Refinery Services
Std 661, Air-Cooled Heat Exchangers for General Refinery Service
Std 662, Plate Heat Exchanger Specification Sheets in Electronic Format, Plate Heat Exchangers for General Refinery Services
Std 662, Plate Heat Exchangers for General Refinery Services
@ Instrumentation and Control Manuals
API 555, Process Analyzers
RP 551, Process Measurement Instrumentation
RP 552, Transmission Systems
RP 553, Refinery Control Valves
RP 554, Process Instrumentation and Control
RP 556, Fired Heaters & Steam Generators
RP 557, Guide to Advanced Control Systems
@ Technical Data Book Petroleum Refining
@ Characterization and Thermodynamics (of petroleum fractions)
@ Material Engineering Publications
Publ 935, Thermal Conductivity Measurement Study of Refractory Castables
Publ 939, Research Report on Characterization and Monitoring of Cracking in Wet H2 S Service
Publ 946, The Effect of Outgassing Cycles on the Hydrogen Content in Petrochemical Reactor-Vessel Steels

Publ 950, Survey of Construction Materials and Corrosion in Sour Water Strippers
RP 934, Materials and Fabrication Requirement for 2-1/4Cr-1MO & 3Cr-1Mo Steel Heavy Wall Pressure Vessels for
High Temperature, High Pressure Hydrogen Service
RP 936, Refractory Installation Quality Control Guidelines
RP 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
RP 945, Avoiding Environmental Cracking in Amine Units
@ Petroleum Products and Petroleum Product Surveys
Publ 4261, Alcohols and Ethers: A Technical Assessment of Their Application as Fuels and Fuel Components
Std 1512, Petroleum Test Laboratory Accreditation Program
@ Health, Environment and Safety
Publ 421, Management of Water Discharges: Design and Operation of Oil-Water Separators
Publ 422, Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Document
Publ 800, Literature Survey: Subsurface and Groundwater Protection Related to Petroleum Refinery Operations
Publ 958, Pilot Studies on the Toxicity of Effluents from Conventional and Carbon Enhanced Treatment of Refinery Wastewater-Phase III

RP 751, Safe Operation of Hydrofluoric Acid Alkylation Units

@ Market Data and Statistics
@ Safety and Fire Protection
@ Publications
Pub 2378, 1999 Summary of Occupational Injuries, Illnesses and Fatalities in the Petroleum Industry
Publ 2009, Safe Welding and Cutting Practices in Refineries, Gasoline Plants, and Petrochemical Plants
Publ 2028, Flame Arresters in Piping Systems
Publ 2030, Application of Water Spray Systems for Fire Protection in the Petroleum Industry
Publ 2201, Procedures for Welding or Hot Tapping on Equipment in Service
Publ 2214, Spark Ignition Properties of Hand Tools
Publ 2216, Ignition Risk of Hydrocarbon Vapors by Hot Surfaces in the Open Air
Publ 2217A, Guidelines for Work in Inert Confined Spaces in the Petroleum Industry
Publ 2219, Safe Operation of Vacuum Trucks in Petroleum Service
Publ 2510A, Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities
Publ 760, Model Risk Management Plan Guidance for Petroleum RefineriesGuidance for Complying with EPAs
RMP Rule (40 Code of Federal Regulations 68),
Publ 770, A Managers Guide to Reducing Human Errors; Improving Human Preformance in the Process Industries
RP 2001, Fire Protection in Refineries
RP 2003, Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents
RP 2210, Flame Arresters for Vents of Tanks Storing Petroleum Products
RP 2220, Improving Owner and Contractor Safety Performance
RP 2221, Managers Guide to Implementing a Contractor Safety Program
RP 750, Management of Process Hazards
RP 752, Management of Hazards Associated With Location of Process Plant Buildings, CMA Managers Guide
@ Storage Tank Safety Standards
Publ 2021, Fighting Fires In and Around Flammable and Combustible Liquid Atmospheric Petroleum Storage Tanks
Publ 2021A, Interim StudyPrevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks

Publ 334, A Guide to Leak Detection for Aboveground Storage Tanks

RP 2350, Overfill Protection for Storage Tanks in Petroleum Facilities
Std 2015, Safe Entry and Cleaning of Petroleum Storage Tanks
@ Storage Tanks
Air Emissions from Aboveground Storage Tanks Manual
Bull 2521, Use of Pressure-Vacuum Vent Valves for Atmospheric Loss
Chapter 19.1, Evaporative Loss From Fixed Roof Tanks
Chapter 19.1A, Evaporation Loss from Low-Pressure Tanks
Chapter 19.4, Recommended Practice for Speciation of Evaporative Losses
Publ 2557, Vapor Collection and Control Operations for Storage and Transfer Operations in the Petroleum Industry

Comments

particularly flating head andr U-tubes

Installation procedures for common equip

Re electroinic and pneumatic controls
Not a procurment spec
Implementation & owenership, 2000, 1 ed
Prpoerties data for simulations

2001
Cost

Process Engineers' Codes & Standards - Prelminary

Publisher
API I.
API I.
API I.
API I.
API J.
API J.
API K.
API K.01
API K.01
API K.02
API K.03
API K.04
API K.05
API K.05
API K.05
API K.06
API K.07
API K.08
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.10
API L.
API M.
API N.
API O.
ASA
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME

Code or Standard
@ Valves
RP 591, User Acceptance of Refinery Valves,
Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged Type
Std 598, Valve Inspection and Testing
@ Industry Training
Publ 1200E, Electronic Curriculums Manager for Federally Mandated Training and Information
@ Health and Environmental Issues
@ Air Research
Publ 335, Refinery MACT Workshop Manual
@ Environment and Safety Data
@ Human Health Related Research
@ Natural Resource Damage Assessment
@ Pollution Prevention
Publ 300, The Generation and Management of Waste and Secondary Materials in the Petroleum Refining Industry
Publ 302, Waste Minimization in the Petroleum Industry: A Compendium of Practices
@ Soil and Groundwater Research
@ Environmental Stewardship Program Publications
@ Storage Tank Research
@ Surface Water Research
DR 351, Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity
Publ 4602, Minimization, Handling, Treatment and Disposal of Petroleum Products Terminal Wastewaters

Comments

2001
Cost

Maximum achievable control technology

Offshore exploration

Publ 4606, Source Control and Treatment of Contaminants Found in Petroleum Product Terminal Tank Bottoms
Publ 4610, Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Waters

Publ 4633, Barium in Produced Water: Fate and Effects in the Marine Environment
Publ 4663, Remediation of Salt-Affected Soils at Oil and Gas Production Facilities
Publ 4666, The Toxicity of Common Ions to Freshwater and Marine Organisms
Publ 4676, Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options
Publ 4688, Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters
Publ 4694, Laboratory Analysis of Petroleum Industry Wastewaters
Publ 4695, Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits
Publ 4698, A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil
and Gas Production Operations
@ Waste Research
@ Subscriptions and Information Technology Products
@ Policy and Economic Studies
@ Public Affairs and Information
@ Out of Print Publications
A112 "Plumbing, flor and roof drains" etc
A120.1 Safety Requirements for Powered Platforms for Buidling Maintenance
A13.1 Scheme for the Identification of Piping Systems (Identifying piping contents & hazards therof, etc)
A17 "Elevators & Escalators" etc
A18 Safety Standard for Platform Lifts & Stairway Chairlifts
A90 .1 Safety Standard for Belt Manlifts
AG-1 Code on Nuclear Air & Gas Treatment
B1 "Screw Threads" etc
B107 "Hammers and other tools" etc
B133 .4 Gas Turbine Control & Protection Systems
B133.10 Procurement Standard for Gas Turbine Information to be Supplied by User and Manufacturer
B133.11 Procurement Standard for Gas Turbine Preparation for Shipping & Installation
B133.16 Procurement Standard for Gas Turbine Marine Applications
B133.2 Procurement Standard for Gas Turbine Maintenance & Safety
B133.3 Procurement Standard for Gas Turbine Auxiliary Equipment
B133.7M Gas Turbine Fuels
B133.8 Gas Turbine Installation Sound Emissions
B133.9 Measurement of Exhaust Emissions from Stationary Gas Turbine Engines
B15 .1 Safety Standard for Mechanical Power Transmission Apparatus
B16 Fittings, flanges and gas valves (eg: AMSE B16.34 - Control valves?)
B17 Keys & Keyseats
B18 Fasteners (Rivets, nuts, bolts, etc)
B19 Safety Standard for Air Compressor Systems & Compressors for Process Industries
B20 Safety Standard for Conveyors & Related Equipment
B27 Retaining Rings
B29 "Chains & Sprockets" etc
B30 Lifting Devices
B31 Codes for Pressure Piping
B31.1 Power Piping (Power Boilers & Auxiliaries >15 psig, or, water >160 psig or 250F)
B31.11 Slurry Transportation Piping Systems
B31.2 Fuel Gas Piping
B31.3 Process Piping (was previously called Petroleum Refinery Piping)
B31.4 Pipline Transportation Systems for Liquid Hydrocarbons & Other Liquids
B31.5 Refrigeration Piping & Heat Transfer Components
B31.6 Chemical Plant
B31.7 Nuclear
B31.8 Gas Tranmission & Distribution Piping Systems
B31.9 Building Services
B32 "Wire & Products Other than Pipe" etc
B36.10M Welded & Seamless Wrought Steel Pipe
B36.19M Stainless Steel Pipe

National pllutant discharge elimination system (EPA)

Also adopted by CSA

US$195

Steam & industrial buildings

US$255

X country
Al fluids in chemical plant
CSA Z184

Process Engineers' Codes & Standards - Prelminary

Publisher
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME

Code or Standard
B4 "Tolerances, Limits and Fits" etc
B40 "Thermomoters, seals, snubbers, limiter valves" etc
B46.1 Surface Texture
B47.1 Gage Blanks
B5 "Machine Tools" etc
B56 "Industrial trucks, forklifts" etc
B73.1M Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
B73.2M Specification for Vertical In-Line Centrifugal Pumps for Chemical Process
B73.3M Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process
B73.5M Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process
B89 "General Dimensional Measurement" etc
B89 Power Boilers Section (betz video tape)
B94 "Dies & Cutting Tools" etc
B96.1 Welded Aluminum-Alloy Storage Tanks
BPE Bioprocessing Equipment
BPVC Addenda
BPVC Code Cases
BPVC Interpretations
BPVC Sec I Rules for Construction of Power Boilers
BPVC Sec II Materials, Parts A,B,C,D
BPVC Sec III Subsection NCA, Div 1,2,3
BPVC Sec IV Rules for Construction of Heating Boilers
BPVC Sec IX Welding and Brazing Qualifications
BPVC Sec V Nondestructive Examination
BPVC Sec VI Recommended Rules for the Care & Operation of Heating Boilers
BPVC Sec VII Recommended Rules for the Care & Operation of Power Boilers
BPVC Sec VIII Rules for Construction of Pressure Vessels, Div 1,2,3
BPVC Sec X Fiber-Reinforced Plastic Pressure Vessels
CSD Manufacturer's Installing Contractor's Reports for ASME
CSD-1 Control & Safety Devices for Automatically Fired Boilers
FAP "QA Program Fasteners" etc
HPS High Pressure Systems
HST Air Chain Hoists, etc
MFC "Measurement of Fluid Flow in Pipes", etc (eg: ASME MFC-3M)
MH1 "Pallets"
N278 Self-Operated and Power-Operated Safety-Related Valves Functional Specificatoin Standard
N509 Nuclear Power Plant Air Cleaning Units & Components
N510 Testing of Nuclear Air Treatment Systems
N626 Qualifications & Duties of Specialized Professional Engineers
NOG "Gantry Cranes"
NQA "QA for nuclear facilities" etc
NUM "Cranes, Monorails" etc
OM "Standards, Guides and Code for the Operation & Maintenance of Nuclear Power Plants", etc
PALD Safety Standard for Portable Automotive Lifting Devices
PTC 1 General Instructions
PTC 10 Test Code on Compressors & Exhausters
PTC 11 Fans
PTC 12.1 Closed Feedwater Heaters
PTC 12.2 Steam Surface Condensers
PTC 12.3 Deaerators
PTC 18 Hydraulic Turbines
PTC 18.1 Pumping Mode of Pump/Turbines
PTC 19.1 Measurement Uncertainty
PTC 19.10 Flue and Exhaust Gas Analysis
PTC 19.11 Steam & Water Sampling, Conditioning and Analysis in the Power Cycle
PTC 19.2 Pressure Measurement
PTC 19.22 Digital Systems Techniques
PTC 19.23 Guidance Manual for Model Testing
PTC 19.5 Application Part II of Fluid Meters: Interim Supplement to PTC 19.5 on Instruments and Apparatus
PTC 19.5.1 Weighing Scales
PTC 19.7 Measurement of Shaft Power
PTC 19.8 Measurement of Indicated Power
PTC 20.1 Speed and Load-Governing Systems for Steam turbine-Generator Units
PTC 20.2 Overspeed Trip Systems of Steam Turbine-Generator Units
PTC 20.3 Pressure Control Systems Used on Steam Turbine Generator Units
PTC 21 Particulate Matter Collection Equipment
PTC 22 Performance Test Code on Gas Turbines
PTC 23 Atmospheric Water Cooling Equipment
PTC 24 Ejectors
PTC 25 Pressure Relief Devices
PTC 28 Determining the Properties of Fine Particulate Matter
PTC 29 Speed Governing Systems for Hydraulic Turbine Generator Units
PTC 3.1 Diesel & Burner Fuels
PTC 3.2 Solid Fuels
PTC 3.3 Gaseous Fuels
PTC 30 Air Cooled Exchangers
PTC 31 Ion Exchange Equipment
PTC 32.1 Nuclear Steam Supply Systems

Comments

2001
Cost

Annual additions and revisions

Verifies code intent, provide urgent rules
Written replies to inquiries, typically semiannual
1998?

US$225

Augments BPVC and B31.1

For application in nuclear power plants

Certifications for owner, etc

Forced and natural draft cooling towers.

US$95.00

Process Engineers' Codes & Standards - Prelminary

Publisher

Code or Standard

ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASTM
CCME
CSA
CSA
CSA
CSA
CSA
CSA
DOT
EPA
EPRI
HEI
ISA?
MSS

PTC 33 Large Incinerators Code & Appendix Package

PTC 33A Abbreviated Incinerator Efficiency Test
PTC 36 Measurement of Industrial Sound
PTC 38 Determining the Concentration of Particulate Matter in a Gas Stream
PTC 39.1 Condensate Removal Devices for Steam Systems
PTC 4 Fired Steam Generators
PTC 4.2 Coal Pullverizers
PTC 4.3 Air Heaters
PTC 4.4 Gas Turbine heat Recovery Steam Generators
PTC 40 Flue Gas Desulfurization Units
PTC 46 Overall Plant Performance
PTC 5 Reciprocating Steam Engines
PTC 6 & 6A Test Code on Steam Turbines
PTC 6S Procedures for Routine Performance Test of Steam Turbines
PTC 7.1 Displacement Pumps
PTC 8.2 Centrifugal Pumps
PTC 9 Displacement Compressors, Vacuum Pumps & Blowers
PTC PM Performance Monitoring Guidelines for Steam Power Plants
PTC12.4 Moisture Separator Reheaters
PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy - eg: submersibles, air locks, etc
QAI Qualifications for Authorized Inspection
QEI Standard for the Qualification of Elevator Inspectors
QHO Standard Qualification and Certification of Hazardous Waste Incinerator Operator
QME Qualification of Active Mechanical Equipment
QMO Standard for the Qualification and Certification of Medical Waste Incinerator Operators
QRO Standard for the Qualification & Certification of Resource Recovery Facility Operators
QTC GT PowerPlant TestCode?
RTP-1 Reinforced Thermoset Plastic Corrosion Resistant Equipment
Sec XI Rules for Inservice Inspection of Nuclear Power BPVC Plant Components
SI ASME Orientation and Guide for use of SI-1 (Metric) Units-Ninth Edition

NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE

@ NACE Book of Standards--Hard Copy

RP0182-95 Initial Conditioning of Cooling Water Equipment
RP0189-95 On-Line Monitoring of Cooling Waters
API RP 1632 Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems -- 1996 Edition
MR0175-2001 Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment

Comments

Nuclear

Nuclear

STS-1-2000 Steel Stacks

Y14 Acronyms, Mechanical Engineering Drawing Practices, etc
Y32 Graphic Symbols
Y32.1 Graphic Symbols for Process Flow Diagrams in Petroleum and Chemical Industries
Y32.10 Graphic Symbols For Fluid Power Diagrams
Y32.2.3 Graphic Symbols for Pipe Fittings, Valves and Piping
Y32.2.4 Graphic Symbols for Heating, Ventilating and Air Conditioning
Y32.2.6 Graphics Symbols for Heat-Power Apparatus
Y32.4 Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture & Building Construction
National Emission Guidelines for Stationary Combustion Turbines - Canadian Council of Ministers of the Environment (CCME)

B51.95 Boiler, Pressure Vessel, and Pressure Piping Code

B51.95 Part 1, Including Appendix I, Automotvie Propane Vessel Standards
B51.95 Part 2, High Pressure Cylinders for the On-Board Storage of Natural Gas
B51.95 Part 3, Requirements for CNG Refuelding Stqation Presure Piping Systems and Ground Storage
B52.95 Mechanical Refrigeration Code
Z662-1994 Oil and Gas Pipeline Systems
Regulations Governing the Transportation of Haaardous Materials in Tank Motor Vehicles

S77.14.01 Fossill..ST By Pass Systems

Std Practice SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions

5/SSPC-SP 12 Surface Preparation of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating

8/SSPC-SP 14 Industrial Blast Cleaning

7/SSPC VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by Water Jetting
9/SSPC VIS 5 Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning
NACE/SSPC Joint Standards Package (NACE No 1,2,3,4,5,6,8)
RP0100-2000 Cathodic Protection of Prestressed Concrete Cylinder Pipelines
RP0169-96 Control of External Corrosion on Underground or Submerged Metallic Piping Systems
RP0170-97 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress
Corrosion Cracking During Shutdown of Refinery Equipment
RP0176-94 Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control
Systems
RP0181-94 Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment
RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms
RP0196-96 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
RP0198-98 The Control of Corrosion Under Thermal Insulation and Fireproofing Materials--A Systems Approach
RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids
RP0288-94 Inspection of Linings on Steel and Concrete
RP0292-98 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment
RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at
Ambient Temperatures
RP0296-2000
Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure
Vessels in Wet H2S Environments

ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA

ABSA

2001
Cost

Process Engineers' Codes & Standards - Prelminary

Publisher
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE

NEMA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
OSHA
TEMA

Code or Standard

Comments

RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service

RP0387-99 Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications
RP0375-99 Wax Coating Systems for Underground Piping Systems
RP0388-95 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
RP0391-2001 Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient
Temperatures
RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems
RP0394-94 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe
Coating
RP0399-99 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality
Control
RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in
Corrosive Petroleum
Environments
RP0475-98
SelectionRefining
of Metallic
Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing
Formations
RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for
Interim (Temporary) Corrosion Protection
RP0497-97 Field Corrosion Evaluation Using Metallic Test Specimens
RP0575-01 Internal Cathodic Protection Systems in Oil-Treating Vessels
RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds
RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking
RP0775-99 Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oilfield Operations
SPECIALTY PACKAGE: Sulfide Stress Cracking in Oilfield Equipment
SPECIALTY PACKAGE: Cathodic Protection of Pipelines/Tanks
SPECIALTY PACKAGE: Corrosion Control of Equipment Used in Offshore Operations
TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines
TM0173-99 Methods for Determining Water Quality for Subsurface Injection Using Membrane Filters
TM0194-94 Field Monitoring of Bacterial Growth in Oilfield Systems
TM0197-97 Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of
Barium Sulfate
and/or
from
(for
Oil & Gas Prod. Systems)
TM0198-98
Slow
StrainStrontium
Rate TestSulfate
Method
for Solution
Screening
Corrosion-Resistant
Alloys (CRAs) for Stress Corrosion
Cracking in Sour
Oilfield
Service
TM0199-99
Standard
Test
Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler
Tubes by the Glass-Bead-Blasting Technique
TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer Surfaces
TM0374-2001 Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of
Calcium Sulfate and Calcium Carbonate from Solution (for Oil & Gas Prod. Systems)
TM0397-97 Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers
TM0399-99 Test Method for Phosphonate in Brine
TM0498-98 Standard Test Method for Measuring the Carburization of Alloys for Ethylene Cracking Furnace Tubes

NFPA 11 Standard on Foam Extinguishing Systems

NFPA 12 Standard for Carbon Dioxide Extinguishing Systems
NFPA 13 Standard for the Installation of Sprinkler Systems
NFPA 14 Standard for the Installtionof Standpipe and Hose Systems
NFPA 17 Standard for Dry Chemical Extinguishing Systems
NFPA 20 Standard for the Installation of Centrifugal Fire Pumps
NFPA 22 Standard for the Installatin of Water Tanks for Private Fire Protection
NFPA 24 Standard for Outside Protection
NFPA 58 Standard for the Storage and Handling of Liquefied Petroleum Gases

ABSA

Standards of Tubular Exchanger Manufacturers Association

ABSA

Standard References and Handbooks

ISA Handbook of Control Valves
Dow Chemical Gas Conditioning Fact Book
NFPA Handbook of Fire Protection
Handbook of Industrial Loss Prevention, Factory Mutual Engineering Corp
ASME Handbook on Water Technology for Thermal Power systems, 1989
Standard Handbook of Power Plant Engineering, 1989

Abbreviations:
ASME = American Society of Mechanical Engineers
ANSI = American National Standards Institute (works with over 175 organizations to approve their standards) (eg: ANSI has approved many API standards)
ASTM = American Standard Testing Materials?
HEI = Heat Exchange Institute
TEMA = Thermal Exchanger Manufacturers Association?
API = American Petroleum Institute
NACE International = National Association of Corrosion Engineers International

2001
Cost

Process Engineers' Codes & Standards - Prelminary

Publisher

Code or Standard

ISA = Instrument Society of America? International Society for Measurement and Control?
CSA = Canadian Standards Association
PTC = Performance Test Code
OSHA = Occupational Safety and Health Administration
ASME "Codes and Standards by Designator Code"
BPVC = AMSE Boiler & Pressure Vessel Code
ASA = American Standards Association (fittings, plumbing etc)
AWWA
AWS (American Welding Society)
ABSA = Alberta Boilers Safety Association

API 610, 1984 said there exists API 5L specification for line pipe ??? Find out about that...

Comments

2001
Cost