ln -s /banktools/vnetbkup/openv /usr/openv to create a soft link

http://www.symantec.com/business/support/index?page=content&id=TECH9288
taskkill /F /IM tpconfig.exe
************
ypcat passwd| grep -i nbkvsrr

(for ldap and nis servers)

default link to open a request for allowing oracle engg to DC

http://sharepoint2.bankofamerica.com/sites/ACDC/default.aspx
***********************************************
ACS COMMANDS
dism x 2,0,1,14 f
NBDB ERROR LOG PATH
/usr/openv/db/data/NBDB.log
cltspospvma01:/usr/openv/db/bin# ./nbdb_admin
/usr/openv/db/bin# ./nbdb_ping
\\VERITAS\NetBackup\bin>nbdb_ping
a5spvma11:/usr/openv/db/bin# ./nbdb_ping
Database [NBDB] is alive and well on server [NB_ca5spvma10].

ca5spvma11:/usr/openv/db/bin# ./nbdb_ping
Database [NBDB] is not available.
**************************************************
NIC settings
1)first chk in bp.conf file which interface is being used
2)if no interface entry in bp.conf then use ./bpclntcmd -self-on same server
3)by using that ip chk on ifconfig -a which nic card it is using
4)then use dladm show-dev to chk that nic card real setting it should be full du
plex recommneded
nic card--linux
use ifconfig to chk which nic ard is being used for backup
ethtool hba name-----(hba name eth4/eth5)
dmesg | grep eth0/mii-tool -v th0---ethtool eth9(ethtool <<interface_name>>)
nic card --aix
use ifconfig -a to chk which network card is used
entstat -d eth0(toshow nic card settings)
NIC settings in AIX
netstat -v|grep -i speed
entstat -d
***************************************

EMM interface initialization failed, status = 78

<admincmd>./nbemmcmd -getemmserver
./nbemmcmd -listhosts
/usr/openv/netbackup/bin/admincmd# ./bpmedialist -m EV3390 -U to check media re
tention
Solaris cmds
du -sk * |sort -rn |more
--HOST=va2apbas543 USER=root DIR=/banktools (shows the o/p in GB)
# du -g -s *
******************************************************************************
if oracle backups are failing with error 25 & 58
/etc (xinetd.conf)
[root@tx8xprck01 etc]# cp xinetd.conf xinetd.conf.08282010
[root@tx8xprck01 etc]# vi xinetd.conf
[root@tx8xprck01 etc]# uname -a
Linux tx8xprck01.bankofamerica.com 2.6.18-128.1.6.el5 #1 SMP Tue Mar 24 12:05:57
EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
[root@tx8xprck01 etc]# whoch kill
[root@tx8xprck01 etc]# which killall
/usr/bin/killall
[root@tx8xprck01 etc]# killall -HUP xinetd or service xinetd restart
*****change this file to (per_source
2 i.e 200 or 400 etc

= 10) to a value 100 and multiple of

http://seer.entsupport.symantec.com/docs/300810.htm
http://seer.entsupport.symantec.com/docs/300810.htm
-bash-3.2$ more /etc/xinetd.conf
#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.
defaults
{
# The next two items are intended to be a quick access place to
# temporarily enable or disable services.
#
#
enabled
=
#
disabled
=
# Define general logging characteristics.
log_type
= SYSLOG daemon info
log_on_failure = HOST
log_on_success = PID HOST DURATION EXIT
# Define access restriction defaults

#
#
#
#

no_access
only_from
max_load
cps
instances
per_source

=
=
=
=
=
=

0
50 10
50
100

# Address and networking defaults

#
#
bind
=
#
mdns
= yes
v6only
= no
# setup environmental attributes
#
#
passenv
=
groups
= yes
umask
= 002
# Generally, banners are not used. This sets up their global defaults
#
#
banner
=
#
banner_fail
=
#
banner_success =
}
AFTER CHANGES
-bash-3.2$ more /etc/xinetd.d/vnetd
# Service vnetd for NetBackup
service vnetd
{
socket_type
= stream
protocol
= tcp
wait
= no
user
= root
server
= /usr/openv/bin/vnetd
disable
= no
instances
= UNLIMITED
per_source
= UNLIMITED
cps
= 1000 1

BEFORE:
-bash-3.2$ more vnetd.INC000017687657
# Service vnetd for NetBackup
service vnetd
{
socket_type
= stream
protocol
= tcp
wait
= no
user
= root
server
= /usr/openv/bin/vnetd
disable
= no
instances
= UNLIMITED
cps
= 1000 1

********************************************************************************
******************************************
Sun Clusert Commands
/usr/cluster/bin/scswitch -z -g bkup-rg -h <dest_nodename>
scswitch -z -g scnb-harg -h NODE_ONE
scstat
scstat -g
scstat -g
va2spvma11:/# scswitch -z -g scnb-harg -h va2spvma12
scswitch: NOTICE: Resource group(s) {scvert-harg on node va2spvma11} were switch
ed to different nodes as a result of their strong resource group affinities for
resource group scnb-harg.
Veritas Cluster Commands:
Veritas Cluster Cheat sheet(http://www.datadisk.co.uk/html_docs/veritas/veritas_
cluster_cs.htm)
va2spvma41:/usr/openv/netbackup/bin# hastatus -summary
-- SYSTEM STATE
-- System

State

Frozen

A va2spvma41
A va2spvma42

RUNNING
RUNNING

0
0

-- GROUP STATE
-- Group

System

Probed

AutoDisabled

State

B
B
B
B

va2spvma41
va2spvma42
va2spvma41
va2spvma42

Y
Y
Y
Y

N
N
N
N

ONLINE
OFFLINE
ONLINE
ONLINE

nbu_group
nbu_group
nics_sg
nics_sg

-- GROUPS FROZEN
hastatus -summary
hagrp -switch <group> to <sys>
hagrp -freeze <group>
hagrp -switch nbu_group -to va2spvma42
************************

********************************************************************************
**********************************************************
--HOST=va2apamt010 USER=root DIR=/
# /home/nbtw9h5/AIX_Tape_Drive_Recfg.ksh ==to recan the tape drives
cfgadm al |grep I tape=solaris
cat /proc/scsi/scsi=linux

lsdev Cc tape=aix
lsattr -El fscsi2|grep -i
# errpt |head
IDENTIFIER TIMESTAMP T C
07A33B6A 0918092811 P H
07A33B6A 0918092711 P H
07A33B6A 0918092611 P H
07A33B6A 0918092511 P H
07A33B6A 0918092411 P H
07A33B6A 0918085411 P H
07A33B6A 0918085311 P H
07A33B6A 0918085211 P H
07A33B6A 0918085111 P H

switch

lsdev -C |grep 0L-08

fcnet1
Defined
fcs3
Available
fscsi1
Available
rmt0
Available
rmt1
Available
rmt2
Available
rmt3
Available

RESOURCE_NAME
rmt3
rmt3
rmt3
rmt3
rmt3
rmt3
rmt3
rmt3
rmt3

lsattr -El fscsi2

attach
none
dyntrk
no
fc_err_recov delayed_fail
scsi_id
sw_fc_class 3

0L-08-01
0L-08
0L-08-02
0L-08-02
0L-08-02
0L-08-02
0L-08-02

DESCRIPTION
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
TAPE DRIVE FAILURE
Fibre Channel Network Protocol Device
FC Adapter
FC SCSI I/O Controller Protocol Device
Other FC SCSI Tape Drive
Other FC SCSI Tape Drive
Other FC SCSI Tape Drive
Other FC SCSI Tape Drive

How this adapter is CONNECTED

False
Dynamic Tracking of FC Devices
True
FC Fabric Event Error RECOVERY Policy True
Adapter SCSI ID
False
FC Class for Fabric
True

ioscan funC |grep=hp-ux -i tape

AIX commad to check the drives failing with Error 85 the below parameter shd be
set
lsattr -El rmt3
block_size
0
res_support
yes
./tpautoconf -a to configure the drives and robot automatically
./tpautoconf -t
./tpautoconf -t
./tpconfig -l
./tpconfig -l
./tpconfig -delete -robot
./vmglob -delete -robot -robnum 2 -devhost tx2pnbm010 (can run from media server
)
./nbemmcmd -deletealldevices -machinename tx2pnbm010 -machinetype media (Need to
run from master server)
rvahbkp3:/usr/openv/netbackup/bin/admincmd # bprsh va2pwap010 "/usr/openv/volmgr

/bin/./vmoprcmd -up 5"

./vmglob -delete -robnum 1 -devhost tx2pidwdb01
./vmglob -delete -robot -serial MPC02207774 -devhost ca3sz1cpwdb03
./vmglob -delete -drive -drvtype hcart3 -serial 9210060803 -devhost mo8atepa040
./vmglob -delete -drive -drvtype dlt -devhost ca3sz1cpwdb03
Image Expiration by imageID
cltspospvma01:/usr/openv/netbackup/bin/admincmd# ./bpimagelist -client cltssd33
-idonly -hoursago 350
Time: Wed Jun 16 18:20:06 2010 ID: cltssd33_1276726806 INCR (1)
Time: Sat Jun 12 01:38:12 2010 ID: cltssd33_1276321092 FULL (0)
:/usr/openv/netbackup/bin/admincmd# ./bpimagelist -backupid cltssd33_1276321092
-L
./bpexpdate -recalculate -backupid cltssd33_1276321092 -d 06/12/2017 23:59:00
Expiration Time: Mon Jun 12 23:59:00 2017 (1497326340)

ACSSA> q scratch all

*********************************************vxlogcfg***************************
*******************
to check the vxlogcfg setting(nblog.conf)/usr/openv/netbackup
/usr/openv/netbackup/bin
./vxlogcfg -l -p NB -o Default
./vxlogcfg -a -p 51216 -o Default -s DebugLevel=0 -s DiagnosticLevel=0
./vxlogcfg -a -p 51216 -o 222
le

-s DebugLevel=0 -s DiagnosticLevel=0

examp

********************************************************************************
***************************************************
to modify the volume pool from cli
./bpplinfo ca4ascor030_aix_sys1_sev3 -modify -pool T10K_Offsite
to change the stu via cli
./bpplinfo ca4ascor030_aix_sys1_sev3 -modify -residence ca4ascor020-dlt2-robot-a
cs-1
./vmpool -bx -listall = to view volume pool list from cli
********************************************************************************
****************************************
./bpclient=to change the vnetd port settings (do it from the master server)it is
changed coz it can use random ports for communication
./bpclient -client tx8aiuci00370 -update -connect_options 2 2 2

./bpclient -client ca3pz1ecmws03 -add

That the following entry exists in the bp.conf file:

CONNECT_OPTIONS=master 0 1 0
********************************************************************************
**************************************
to add a drive from cli in windows
C:\srvapps\VERITAS\Volmgr\bin>tpconfig -add -drive -type dlt2 -port 6 -bus 0 -ta
rget 1 -lun 0 -asciiname STK.T10000B.000 -index 0 -drstatus UP -robot
2 -robtype ACS -ACS 2 -LSM 15 -PANEL 1 -DRIVE 11 -scsi_protection DEFAULT
tpconfig -add -drive -type hcart2 -port 5 -bus 0 -target 2 -lun 0 -asciiname IBM
.ULTRIUM-TD2.001 -index 1 -drstatus UP -robot 0 -robtype ACS -ACS 0 -LSM 0 -PANE
L 1 -DRIVE 2 -scsi_protection DEFAULT
tpconfig -add -drive -type hcart2 -port 5 -bus 0 -target 1 -lun 0 -asciiname IBM
.ULTRIUM-TD2.002 -index 2 -drstatus UP -robot 0 -robtype ACS -ACS 0 -LSM 0 -PANE
L 1 -DRIVE 4 -scsi_protection DEFAULT

to add a robot in windows cli

tpconfig -add -robot 2 -robtype ACS -cntlhost va2spacs200
C:\srvapps\VERITAS\Volmgr\bin>tpconfig -add -drive -type dlt2 -path Tape10 -asci
iname STK.T1BE.502_2 -index 5 -shared yes -drstatus UP -robot 2 -robtype tld
-robdrnum 3
added drive index 5 of type dlt2 to configuration
tpautoconf -report_disc
********************************************************************************
******
to copy files from one server to another
$ pwd
/home/nbkvsrr
$ scp va2spvma01:/usr/openv/java/auth.conf .
********************************************************************************
**************************************
netstat -a |grep bpcd ...becomes netstat -a | findstr bpcd(Windows)
grep=findstr
tracert vadmzsanvma00
http://www.symantec.com/business/support/index?page=content&id=TECH68832
On the client server to test whether the bpcd binary is executable and will gene
rate a log issue the following commandUNIX- <install path>netbackup/bin/./bpcd

Windows- <C:\Srvapps\VERITAS\NetBackup\bin>bpcd
That should generate the following log entry and prove the binary is executable
and generates a log entry
Then to test the bpcd port locally on the client server from the command prompt,
run this telnet test using the loopback interfacetelnet localhost 13782 or
telnet 127.0.0.1 13782
********************************************************************************
***************************************
windows client fails with Error 24 try to edit the following parameters
http://support.microsoft.com/kb/170359/
win2008
Windows provides a mechanism to control the initial retransmit time, and then th
e retransmit time is self-tuning. To change the initial retransmit time, modify
the following values in the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
********************************************************************************
*******************************************
VVS issue for windows system
WWSL3,
Below are the instructions to fix the vssadmin . No reboot is required.
To resolve this issue, follow these steps:
Click Start, click Run, type cmd, and then click OK.
Type the following commands at a command prompt. Press ENTER after you type each
command.
cd /d %windir%\system32
Net stop vss
Net stop swprv
regsvr32 ole32.dll
regsvr32 oleaut32.dll
regsvr32 vss_ps.dll
vssvc /register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
Note The last command may not run successfully.
Perform a backup operation to verify that the issue is resolved.
********************************************************************************
*******************************************
display drive 11,2,1,11 -f type serial_num

display drive 11,2,1,11 -f type wwn

acsls log path
Event log location on NetBackup media server: /usr/openv/volmgr/debug/acsssi/eve
nt.log

Event log location on ACS Library Server: /export/home/ACSSS/log/acsss_event.log

/tel_acsls_p/export/home/ACSSS/log/acsss_event.log
$ more internet.addresses |grep tx2spvma20
171.177.206.162 txVTL3 #tx2spvma20 VTL Mx node 0
$ more internet.addresses |grep tx2spvma30
171.202.194.140 txVTL4 #tx2spvma30 VTL Mx node 0
$ pwd
/export/home/ACSSS/data/external/access_control

C. Do

12/05/08

B. Harmer

08/31/09

**** All Media server entries should be in internet.addresses files

IF BACKUPS ARE STILL FAILING WITH 98 the edit the file internet.addresses after
taking the local copy and the run the rebuild acsss acsss_config option 6 and th
en exit
$ more internet.addresses | grep -i mo8xcora0001
171.201.36.24 mo8spvma33 #mo8xcora0001 Ravi.D
07/18/10
$ more internet.addresses | grep -i lkcma35319
$ vi^C
$ cp internet.addresses internet.addresses011311
$ vi internet.addresses
"internet.addresses" 73 lines, 3678 characters
###########################################################
# Format:
# IP owner_id # server_name [application_name] adder date
#
###########################################################
###########################################################
# tandem
###########################################################
#171.186.7.226
mo8bss # mo8bss tandem M.Seibert 1/18/05
###########################################################
# AS400
###########################################################
#171.186.1.87
AS400KC # kca400k F.Lin 12/02/03
#########################################################################
# NB master: mo8spvma30/31/32
#########################################################################
171.201.35.51 mo8spvma30 #mo8spvma30
C. Do 02/17/10
171.201.35.15 mo8spvma30 #mo8spvma31
C. Do 02/17/10
/mo8xcora0001

171.201.35.33

mo8spvma30 #mo8spvmv33

C. Do

02/17/10

#########################################################################
# NB master: mo8spvma33
#########################################################################
171.201.35.21 mo8spvma33 #mo8spvma33 C.Jones
04/19/10
171.201.33.85 mo8spvma33 #mo8xbidw01 C.Jones
04/19/10
171.201.33.86 mo8spvma33 #mo8xbwdb01 C.Jones
04/19/10
171.201.34.67 mo8spvma33 #lkcma31367 M. Holbert
06/07/10
171.201.36.24 mo8spvma33 #mo8xcora0001 Ravi.D
07/18/10
171.201.34.169 mo8spvma33 #lkcma35319.bankofamerica.com Ravi.D
07/18/10
171.201.18.51 mo8spvma33 #mo8absap120 R.DaRosa
07/22/10
171.201.18.50 mo8spvma33 #mo8absap110 R.DaRosa
07/22/10
171.201.196.211 mo8spvma33 #mo8abmxo121 S.Meadows
07/22/10
171.201.33.110 mo8spvma33 #mo8xchrs001 C.Jones
09/13/10
171.201.33.111 mo8spvma33 #mo8xchrs002 C.Jones
09/13/10
171.201.2.64
mo8spvma33 #mo8xdhrs001 C.Jones
09/13/10
171.201.2.8
mo8spvma33 #mo8xqhrs001 C.Jones
09/13/10
171.201.36.90 mo8spvma33 #mo8xcora01 J.Lehtela
09/17/10
171.201.34.224 mo8spvma33 #lkcme22168 Ravi.D
10/28/10
171.201.36.143 mo8spvma33 #mo8xccnt05 C.Jones
11/12/10
171.201.34.51 mo8spvma33 #lkcme22791 C.Jones
11/12/10
"internet.addresses" 74 lines, 3758 characters
***********
va2spacs401:/banktools/share/bin# su - acsss
Sun Microsystems Inc. SunOS 5.10
Generic January 2005
$ acsss_config
ACSLS feature configuration
Please enter the number followed by Return for your choice
from the following menu to configure product behavior in that area.
Press ? followed by the Return key for help.
1:
2:
3:
4:
5:
6:
7:
8:
E:

Set CSI tuning variables

Set event logging variables
Set general product behavior variables
Set access control variables
Set automatic backup parameters
Rebuild Access Control information
Event Notification settings
Define or Change Library Configuration
Exit

$ acs.menu^C
$ acs_config
ksh: acs_config: not found
type acsss_config
$ acsss_config

(va2spacs201:/banktools# su - acsss) then

ACSLS feature configuration

Please enter the number followed by Return for your choice
from the following menu to configure product behavior in that area.
Press ? followed by the Return key for help.

1:
2:
3:
4:
5:
6:
7:
8:
E:

Set CSI tuning variables

Set event logging variables
Set general product behavior variables
Set access control variables
Set automatic backup parameters
Rebuild Access Control information
Event Notification settings
Define or Change Library Configuration
Exit

Menu choice: 6
Access control tables have been rebuilt.
2011-01-13 02:20:38
2432 I rebuild_ac_lists.c 1 107
rebuild_ac_lists: Access control tables have been rebuilt.
ACSLS feature configuration
Please enter the number followed by Return for your choice
from the following menu to configure product behavior in that area.
Press ? followed by the Return key for help.
1:
2:
3:
4:
5:
6:
7:
8:
E:

Set CSI tuning variables

Set event logging variables
Set general product behavior variables
Set access control variables
Set automatic backup parameters
Rebuild Access Control information
Event Notification settings
Define or Change Library Configuration
Exit

Menu choice: E
$ cmd_proc -ql

********************************************************************************
*************************************************
How to configure NetBackup Resource Broker (nbrb) to improve resource allocation
performance
http://www.symantec.com/business/support/index?page=content&id=TECH57942&locale=
en_us
********************************************************************************
*************************************************
linux log messages path=cd /var/log-messages
********************************************************************************
************************************************
Command to check the replaced drive and correcting the drive
root@plaaxmed01:/opt/openv/volmgr/bin # ./tpautoconf -report_disc
======================= Missing Device (Drive) =======================

Drive Name = PLA_L180_LTO04

Drive Path = /dev/rmt5.1
Inquiry = "IBM
ULTRIUM-TD2
53Y2"
Serial Number = 9110278179
TLD(1) definition Drive = 5
Hosts configured for this device:
Host = plaaxmed01
=========== Missing Device or no local control path (Robot) ===========
Defined as robotic TLD(1)
Inquiry = "STK
L180
0318"
Serial Number = MPC74000563
Robot Control Host = plawinmed09
Drive = 5, Drive Name = PLA_L180_LTO04, Serial Number = 9110278179
Hosts configured for this device:
Host = plaaxmed01
======================= New Device (Drive) =======================
Inquiry = "IBM
ULTRIUM-TD2
53Y2"
Serial Number = 1110163445
Drive Path = /dev/rmt0.1
Ran > tpautoconf

replace_drive PLA_L180_LTO04

path /dev/rmt0.1

Here is tpautoconf -replace_drive cmd to get new serial #

Also attached is doc Jamie created using this cmd while working wintel MM missin
g_path caused by mismatched SSN that has a lot of detail
run this cmd from media servers where drive assigned
will update EMM db with new
SSN
/usr/openv/volmgr/bin/tpautoconf -replace_drive <Drivename> path </dev/rmt/??cbn>
example - 1 mm
/usr/openv/volmgr/bin/tpautoconf -replace_drive STK.T10KB.10.1.1.7 -path /dev/rm
t/2cbn
*********************************************************************
*****AVAMAR services can be started from client avamar console =options-advanced
-restart client agent/stop client agent
D:\Apps\EMC\avs\bin>
avamar services
avagent.exe
avtar.exe
avscc.exe
Please run /usr/local/avamar/bin/avregister to register these linux servers :
Enter the Administrator server address (DNS text name, not the numeric IP addres
s): rvaeavae01.bankofamerica.com
Enter the Avamar server domain [clients]: /VMWare/Local/RVAE
If backups are started manually it sows in activity monitor as On-Deamand Backup
How to start/stop avamar agaent in solaris
/etc/init.d
# ls -l ava*
-rwxr-xr-x 1 root root 10269 Mar 21 01:59 avagent
# ./avagent -avagent Info: Usage: avagent {start|reload|restart|status|stop|dirs|register|act
ivate|unregister|unactivate|clrvardir|uninstallclr|version}

how to register for linus clients

# ./avagent register rtxeava00.bankofamerica.com /VMWare/Local/RTX
avagent Info: Stopping Avamar Client Agent (avagent)...
avagent Info: Client Agent stopped.
[ OK ]
avagent Info <5241>: Logging to /usr/local/avamar/var/avagent.log
avagent Info: Client activated successfully.
[ OK ]
avagent Info <5241>: Logging to /usr/local/avamar/var/avagent.log
avagent Info <5417>: daemonized as process id 17402
avagent Info: Client Agent started.
[ OK ]
****
root@kmoeava02:/usr/local/avamar/etc/ ==repl
https://solutions.emc.com/emcsolutionview.asp?id=esg98771
Symptoms
Client backup is failing.
2008-07-17 03:55:21 avtar Error <6621>: Unable to connect to 127.0.0.1 for CTL m
essages
2008-07-17 03:55:21 avtar FATAL <6610>: Unable to connect to 127.0.0.1 with prop
rietary encryption
Cause
There is a problem with the network interface.
Resolution
This was resolved by restarting the network interface on the client.
*******************
2)https://solutions.emc.com/emcsolutionview.asp?id=esg110957
unable to re-register the client (* 100 * re-registration of account is not perm
itted)

********************************************************
to check avamar grid version
status.dpn
*******************************
check if the below ports exists in /etc/services
Netbackup default ports
# NetBackup services #
bprd
13720/tcp
bprd
13720/udp
bpdbm
13721/tcp
bpdbm
13721/udp
bpcd
13782/tcp
bpcd
13782/udp
vnetd
13724/tcp

#
#
#
#
#
#
#

BPRD (VERITAS NetBackup)

BPRD (VERITAS NetBackup)
BPDBM (VERITAS NetBackup)
BPDBM (VERITAS NetBackup)
VERITAS NetBackup
VERITAS NetBackup
Veritas Network Utility

vnetd
13724/udp
vopied
13783/tcp
vopied
13783/udp
bpjava-msvc
13722/tcp
bpjava-msvc
13722/udp
bpjobd 13723/tcp
bpjobd
nbdb
13785/tcp
nbdb
13785/udp
# End NetBackup services #

#
#
#
#
#

Veritas Network Utility

VOPIED Protocol
VOPIED Protocol
BP Java MSVC Protocol
BP Java MSVC Protocol

# NetBackup Database
# NetBackup Database

# Media Manager services #

vmd
13701/tcp
vmd
acsd
13702/tcp
acsd
tl8cd 13705/tcp
tl8cd
odld
13706/tcp
odld
tldcd 13711/tcp
tldcd
tl4d
13713/tcp
tl4d
tshd
13715/tcp
tshd
tlmd
13716/tcp
tlmd
tlhcd 13717/tcp
tlhcd
rsmd
13719/tcp
rsmd
# End Media Manager services #
********************************************
Command to check in linux if services are running or not
# netstat -a |grep -i bpcd
# netstat -a |grep -i 13782
# service iptables status
Firewall is stopped.
# service xinetd status
xinetd (pid 31987) is running...
# service bpcd status
bpcd: unrecognized service
# /etc/init.d/xinetd stop
Stopping xinetd:
# ps -ef |grep xinetd
root
9088 30097 0 02:59 pts/2
# /etc/init.d/xinetd start
Starting xinetd:
# ps -ef |grep xinetd
root
9355
1 0 03:00 ?
root
9535 30097 0 03:00 pts/2
# netstat -a |grep -i bpcd
tcp
0
0 *:bpcd
# pwd

[ OK ]
00:00:00 grep xinetd
[ OK ]
00:00:00 xinetd -stayalive -pidfile /var/
00:00:00 grep xinetd
*:*

LIST

*****************************************************
vxlogcfg settings=http://www.netbackupcommands.com/index.php?option=com_content&
task=view&id=40&Itemid=29
To set the maximum logging level for all daemons run:
# cd /usr/openv/netbackup/bin
# ./vxlogcfg -a -p 51216 -o Default -s DebugLevel=5 -s DiagnosticLevel=5

Note: For servers with high logging levels and lots of activity, the vxlogview c
ommand can take a long time to complete. This delay will be more noticeable the
further back the query has to search.
To return to the default level of logging for all daemons run:
# cd /usr/openv/netbackup/bin
# ./vxlogcfg -a -p 51216 -o Default -s DebugLevel=1 -s DiagnosticLevel=1
To disable logging for all daemons run:
# cd /usr/openv/netbackup/bin
# ./vxlogcfg -a -p 51216 -o Default -s DebugLevel=0 -s DiagnosticLevel=0
After setting these options run vxlogcfg -p 51216 -o Default -l to verify the c
hange is in place. No process restart is needed for changes to Unified Logging
to take affect.

********************************************************
to check the HBA details in solaris
tx8siucd0302:/# luxadm -e port
/devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl
/devices/pci@8,600000/SUNW,qlc@1/fp@0,0:devctl
/devices/pci@8,600000/SUNW,qlc@1,1/fp@0,0:devctl
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl
/devices/pci@8,600000/SUNW,qlc@2,1/fp@0,0:devctl

CONNECTED
CONNECTED
NOT CONNECTED
CONNECTED
NOT CONNECTED

to check wht devices are connect to the port

tx8siucd0302:/# luxadm
l
Pos AL_PA ID Hard_Addr
0
ef 0
ef
1
e8 1
e8
2
1 7d
0
Bus Adapter)

-e dump_map /devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devct
Port WWN
21000014c3caaab4
21000014c3cac743
250000144f1e8bed

Node WWN
20000014c3caaab4
20000014c3cac743
240000144f1e8bed

Type
0x0 (Disk device)
0x0 (Disk device)
0x1f (Unknown Type,Host

give us the wwn of the HBA card

fcinfo hba-port
tx8spvma03:/# fcinfo hba-port
HBA Port WWN: 2101001b323485f5
OS Device Name: /dev/cfg/c7
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 4.04.01
FCode/BIOS Version: BIOS: 1.24; fcode: 1.24; EFI: 1.8;
Serial Number: 0402G00-0829580526

Driver Name: qlc

Driver Version: 20080617-2.29
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2001001b323485f5
fcinfo hba-port to check the hba online/offline (solaris)
systool(linux) systool -c fc_remote_ports
systool -c fc_transport -v
**systool -c scsi_tape -v -d |more
Linus=cmd to check hba setting
# ethtool eth4
Settings for eth4:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: yes
***************************
******************************
to check the images what had backedup
/usr/openv/netbackup/bplist C va2psyb02 t 0
:MM:SS / > /tmp/va2psyb02.txt

R c

***************************************
Oracle backup which log files to be created
dbext under /usr/openv/netbackup/logs/user_ops,
dbclinet, bphdb and make verbose=5
/usr/openv/netbackup/dbclient
/usr/openv/netbackup/dbext/
**********************
NDMP
./tpautoconf -probe CRPKMOFP00
*************************
Tpclean
./tpclean -M STK.T10KB.L0.d8

l s mm/dd/yyyy HH:MM:SS

e mm/dd/yyyy H

*******************
Mail-ID's
DG is - [email protected]
*********************************
Libattach path
\crprdniisl2e\ftproot\Sun\LibAttach\1.4.2\Install\patch\138477-01 (file://crprdn
iisl2e/ftproot/Sun/LibAttach/1.4.2/Install/patch/138477-01
*******************
Linux commands
chkconfig --list ==will chk if servives or on/off

************************************
NDMP COMMANDS to check if volume exists or not
# ssh nkcma00101n2 ndmpd password backup
[root@tx2xpvlxxl ~]# ssh crpwtxu01n2 rdfile /etc/exports|grep -i acx
[root@tx2xpvlxxl ~]# ssh crpwtxu01n2 rdfile /etc/exports|grep -i 17669
[root@tx2xpvlxxl ~]# ssh crpwtxu01n2 rdfile /etc/exports|grep -i vol4
./tpautoconf -probe crprtxfp01.bankofamerica.com |grep -i tape
i just run df -g VOL_NAME
you can run vol status VOL_NAME also
or just df -g then grep the volume name
ssh scsinfnpds03 vol status /vol/dbdump_qar/ ==command to check status of a volu
me
ssh scsinfnpds03 vol status === shows the status of all the volumes
ssh crprtxfp01 storage alias
./set_ndmp_attr -verify <client Name>
./set_ndmp_attr -probe <Client Name>
**command to check tape drives s/n
storage show tape
**commandto show hba adapter on filers
storage show adapter -a
command shows Display all of the sysconfig reports
sysconfig -A
crprvafp03n1> mt -f nrst0a status
Tape drive: STK
T10000B
Status: offline
Format: STK T1 tape 1000GB
fileno = -1 blockno = -1 resid = 0

crprvafp03n1> mt -f nrst0a status

Tape drive: STK
T10000B
Status: in use
Format: STK T1 tape 2000GB cmp
fileno = 1 blockno = 0 resid = 0
***ndmpd killall
run the verify command from the master to the filer. Make sure you are logged in
to the filer when you run it so you can see if you are out of NDMP sessions
it will scroll on the filer if youare out of sessions and the verify will fail
**tpautoconf -probe nrdna72807n02
************************
NBU ERROR TROUBLE SHOOTING TIPS
Error:12( (10) allocation failed) for aix machines
GENERAL ERROR : Status 10 on AIX client, the bpbkar process produces "bpbkar rea
d_and_sort_dir_entries: FTL - dir_list_rec malloc failed. Errno = 12:" messages
in the log when backing up a file system that contains too many small files
http://www.symantec.com/business/support/index?page=content&id=TECH76719

bpbkar==touch file in /usr/openv/netbackup=bpbkar_path_tr increase the verbose t

o 5 and created bpbkar log directory in /usr/openv/netbackup/logs it will show f
or which file the backups have failed in detail
******
http://www.symantec.com/business/support/index?page=content&id=TECH70708
backups failing with error 13
IGNORE_XATTR = YES
***********************************
Decru commands
sys reboot -p to reboot the decru box
kfc list -f 0,1,2,3,4,xxx to see the boards
if the Port Bounces do not work...there is a step by step process to perform the
entire sys reboot and or bounce
first bounce the Master Server
second Bounce the Library
3rd Bounce Ports
the nthe Decru
to check
kfc list
kfc list
kfc list
kfc list
kfc list

the board the command is

-f 0
-f 1
-f 2
-f 3
-f 4

from the o/p we get we should be checking TARGET LINK STATUS=Up

to reset the decru port for HBA

kfc fw host reset -f1(kfc list -f1)

************
SG.conf
ls /dev/rmt
/usr/sbin/rem_drv sg
/usr/bin/rm -f /kernel/drv/sg.conf
cd /dev/rmt
unalias rm
rm *
cd /dev/sg
rm *
cfgadm -al | grep tape
devfsadm -C
ls -l /dev/rmt/*cbn
cd /usr/openv/volmgr/bin/driver
/usr/openv/volmgr/bin/sg.build all -mt 0 -ml 22
/usr/bin/rm -f /kernel/drv/sg.conf
/usr/openv/volmgr/bin/driver/sg.install
ls -l /dev/sg
/usr/openv/volmgr/bin/sgscan
/usr/openv/volmgr/bin/./tpautoconf -t
********************************
There are over 5000 maestro processes running with a common parent ID 585788 and
this is quite abnormal. We need maestro team to look into this and hopefully re
cycle the parent process.
--HOST=va2pape030 USER=root DIR=/
--# > ps -fp 585788
UID
PID
PPID C
STIME
maestro 585788
1 0 Nov 28
n/netman

TTY TIME CMD

- 10:16 /banktools/maestro/8.3.0/bi

--HOST=va2pape030 USER=root DIR=/

--# > ps -ef | grep 585788 | wc -l
5001
************************
oracle backups failing with 21
http://www.symantec.com/business/support/index?page=content&id=TECH49867
*************************
Linux
root@cltrsklpdb01 bin]# /usr/openv/netbackup/bin/bpps -a
NB Processes
-----------tail: cannot open `+2' for reading: No such file or directory
tail: cannot open `+2' for reading: No such file or directory
edit the file
/etc/profile

export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC _POSIX2_VERSION=199209

**************************
pbx parameters are the default
C:\Program Files\VERITAS\VxPBX\bin>pbxcfg -p
Auth User:0 : localsystem
Secure Mode: false
Debug Level: 10
Port Number: 1556
PBX service is not cluster configured
C:\Program Files\VERITAS\VxPBX\bin>pbxcfg -[Error] V-103-21 Error: Invalid command!

Usage:
pbxcfg
pbxcfg
pbxcfg
pbxcfg

{ -a
{ -e
-p [
-s {

| -r } -u <username> [ -c <registry hive> ]

| -d } { -m | -w } [ -c <registry hive> ]
-u ] [ -m ] [ -l ] [ -n ] [ -C ] [ -c <registry hive> ]
-l <debug level> | -n <port no> } [ -c <registry hive> ]

pbxcfg -v
pbxcfg -h
commands:
-a, --add

--enable
--disable
--print
--set

Add entries in the registry

hive
Remove entries from the
registry hive
Enable entries
Disable entries
Display information
Set entries

--user
--securemode
--portno
--sysuser
--debuglevel
--cluster
--cfgfile
--help
--version

Auth User
Secure/Insecure mode
Port Number
Local System user on Windows
Debug Level
Cluster enable/disable
Registry hive
Display help
Display version of the CLI

-r, --remove
-e,
-d,
-p,
-s,
options:
-u,
-m,
-n,
-w,
-l,
-C,
-c,
-h,
-v,

************************************************************
to add a cluster name and a two node name to gets the backups successful
./nbemmcmd -addhost -machinename wkcme25811v01 -machinetype app_cluster
./nbemmcmd -updatehost -add_server_to_app_cluster -machinename wkcme25811n01 -ma
chinetype media -clustername wkcme25811v01 -netbackupversion 6.5.3 -masterserver
mo8spvma33
./nbemmcmd -updatehost -add_server_to_app_cluster -machinename wkcme25811n02 -ma
chinetype media -clustername wkcme25811v01 -netbackupversion 6.5.3 -masterserver

mo8spvma33
*********************************
how to ftp to symantec site from bank laptop
:\Documents and Settings\nbevlui>ftp ftpproxy
Connected to ftpproxy-bc.3dns.bankofamerica.com.
220 Bank of America - bcpxyric3 - FTP proxy
User (ftpproxy-bc.3dns.bankofamerica.comnone)): iosupport@[email protected]
.symantec.com
iosupport@[email protected]
iS*pp8rT1@Anu89sha
iS*pp8rT1@nbkpasswd
331 Enter password.
Password:
230 Virtual user iosupport logged in.
ftp> bin
200 Command okay.
*********************************************
add_media_server_on_clients.exe
to add master server bp.conf to all the clients
http://www.symantec.com/business/support/index?page=content&id=TECH48402
*****************************
backups failing with 49
1)backups fails due to bpbkar file is corrupt
2)http://www.symantec.com/business/support/index?page=content&id=TECH64711 for H
P-UX machines
(sdbe026a:root)# /usr/contrib/bin/show_patches |grep -i PHSS_33946
PHSS_33946
HP aC++ -AA runtime libraries (aCC A.03.85)
*********************
command to compress the db/images or catalog
./bpimage -compress -allclients
********************************************
backups failing with 21
remove the unwanted media servers from client bp.conf and set the client time ou
t=3600
*********************************
Communication with the server has not been initiated or the server status has no
t been retrieved from the serve
Oracle backups failing with error 6
Problem
STATUS CODE 6: NetBackup Oracle RMAN backups are failing with a NetBackup Status

Code 6 (the backup failed to back up the requested files) and an ORA-27028 erro
r message.

Error
the backup failed to back up the requested files

Solution
Overview:
Receiving ORA-27028 and NBU status code 6 when attempting Oracle Recovery Manage
r (RMAN) backup.
Troubleshooting:
Enable the dbclient log file from the Oracle server.
Log Files:
The dbclient log file on the Oracle server shows the following message:
<16> openProgressFile: ERR - can't make directory path: </usr/openv/netbackup/lo
gs/user_ops/dbext/logs>: 13
<16> CreateNewImage: ERR - openProgressFile() failed
<16> VxBSACreateObject: ERR - Could not create new image with file /bk_10_1_6165
80548.
<16> xbsa_CreateObject: ERR - VxBSACreateObject: Failed with error:
Server Status: Communication with the server has not been initiated or the ser
ver status has not been retrieved from the serve
<4> sbtend: INF - --- END of SESSION --The Oracle UNIX user account used for the backup did not have read/write privile
ges to the /usr/openv/netbackup/logs/user_ops/ directory or a subdirectory of th
at path.
Resolution:
Change the file modes of the following directories to 777 - "chmod 777 <path>" w
here <path> is:
/usr/openv/netbackup/logs/user_ops
/usr/openv/netbackup/logs/user_ops/dbext
/usr/openv/netbackup/logs/user_ops/dbext/logs
Read/write/execute permissions by user, group and other for these directories ar
e required for successful user initiated backups including Oracle RMAN backups.
*********************************************************
The netbackup start script S77netbackup is found in /etc/user_initlevels on the
AIX servers.
A ticket needs to be opened to SA group that supports these servers as there mus
t have been error in the server build script because
On both of these servers script is misspelled
_S77_vnetbkup
This is way netbackup is not automatically restarted on reboot
r --HOST=va2apcad010 USER=nbtteq5 DIR=/home/nbtteq5
$ ls -l /etc/user_initlevels|grep vnet
-rwxr--r-1 root
system
529 Oct 11 2008 K77_vnetbkup

-rwxr--r--

1 root

system

530 Oct 11 2008 _S77_vnetbkup

--HOST=va2apcad020 USER=nbtteq5 DIR=/home/nbtteq5

$ ls -l /etc/user_initlevels|grep vnet
-rwxr--r-1 root
system
529 Oct 11 2008 K77_vnetbkup
-rwxr--r-1 root
system
530 Oct 11 2008 _S77_vnetbkup

***********************************
user id got lokced in linux
root@tx8xufrd10 ~]# pam_tally2 --user nbkupyl
Login
Failures Latest failure
From
nbkupyl
16
07/07/10 05:26:50 B001E4FA7BEF3.asia.bankofamerica.com
[root@tx8xufrd10 ~]# pam_tally2 --user nbkupyl --reset
getent passwd nbkupyl= to know whos id is it in linux
********************************************************
Error code 13
http://www.symantec.com/business/support/index?page=content&id=TECH71821
*************************
Operation/OS type
SOLARIS HP-UX AIX
LINUX WINDOWS
Tape drive visibility at OS end cfgadm -al | grep -i tape
ioscan -fnC tape
lsdev -Cc tape cat /proc/scsi/scsi | grep -i tape
**************************
BPCD
Administration Console:
1. Launch the NetBackup Administration Console, connecting to the master server
2. Expand Host Properties in the left pane
3. Select Master Server in the left pane
4. Click the name of the master server in the right pane
5. Select the Client Attributes section
6. Add the name of the client in question if it isn't listed
7. In the Connect Options tab for the client, make the following changes:
BPCD connect back -> "Random port"
Ports -> "Reserved port"
Daemon connection port -> "Daemon port only"
telnet localhost bpcd
*********************