REB 670 Application

ABB Ltd.
Bangalore, 2007
Substation Automation
Products Training
Substation Automation Products 2007-09-11

1
REB 670
Busbar Protection IED
ABB LtdBangalore., 2007
REB 670 Training

2
Application Areas for REB 670
Centralized Busbar
Protection from 4 up to 24
CT inputs
Differential, BFP & Non-Dir

OC Protection for:
Busbars
Meshed corners,

3
T-protection
Three-Phase Terminal; 4/8 Bays- Double Zone
REB 670; 3Ph

2 Zones (A & B);
8 Bays
Application Areas:
Smaller Buses (up to 8 CTs per zone)
Single Busbar Stations (with Transfer Bus)
1 Breaker Stations
Double Busbar Stations (with Transfer Bus)
Zone Interconnection included in the design
No switching in CT secondary circuits

4
REB 670 3- Ph; BBP, BFP & EnFP for single buses
ZA
ZB
ZA
Single Bus with bus tie CB

up to 3/7 feeder bays on each side
Single Busbar
up to 4/8 feeder bays
ZA
ZA
ZB
ZB
H type station with bus-section CB

or sectionalizing disconnector
Alternative CT Location

5
T connections
REB 670 3- Ph, BBP, BFP, EnFP for 1 CB stations

ZA
ZB
1 Breaker Stations
up to 4 diameters
ZA
.. .
ZB
1 Breaker Stations
up to 8 diameters

6
REB 670 3- Ph; BBP, BFP & EnFP for Double CB stations
ZA
.. .
ZB
Double Breaker Station

up to 8 feeders

7
REB 670 3- Ph; BBP, BFP & EnFP for double buses
ZA
.. .
ZB
Double Bus with bus-coupler CB

and up to 6/7 feeder bays
ZA
.. .
ZB
.. .
Transfer Bay
Transfer Bus
.. .
Isolator replica in REB 670*1.0

by CAP 531 Configuration
Double Busbars with bus coupler CB and Transfer Bus

8
Optional Measuring Point
Scheme Layout for Double Busbar; 2 Zones/7 feeders

700
ABB
EQUIPMENT INCLUDED in the PANEL:
1 pcs 3 phase, Busbar protection terminal REB 670*1.0

- two differential zones
- check zone
- eight BFP relays
- eight OC feeder backup protection (EnFP)
- internal disconnector replica logic
- internal individual bay tripping logic
- disconnector status supervision

9
Single-Phase Terminal; 12/24 Bays- Double Zone

REB 670; Ph-L1
2 Zones (A & B);
24 Bays
REB 670; Ph-L2

2 Zones (A & B);
24 Bays
REB 670; Ph-L3
2 Zones (A & B);

24 Bays

10
Application Areas:
Bigger Buses (up to 12/24 bays per zone)
Single Busbar Stations (with Transfer Bus)
1 Breaker Stations
Double Busbar Stations (with Transfer Bus)
Load Transfer is included into the design
3 Terminals required for complete scheme
LDCM available to share binary IO
No switching in CT secondary circuits
REB 670 1- Ph; BBP, BFP & EnFP for single buses
ZA
.. .
ZA
Single Bus
ZA
.. .
.. .
11
.. .
Single Bus with bus-section disconnector

up to 12/24 feeder bays (i.e. 12+12; 16+8 etc.)
ZB
Single Bus with bus-section CB, up to

11/23 feeder bays (i.e. 12+11; 10+13 etc.)
.. .
ZB
ZA
.. .
.. .
ZB
Single Bus with bus-section CB

up to 11/23 feeder bays on each side
REB 670 1- Ph; BBP applications for 1 CB stations
ZA
ZA
.. .
ZB
1 Breaker Stations
up to 6 / 12 diameters

12
.. .
ZB
1 Breaker Stations
up to 12 / 24 diameters
REB 670 1- Ph, Complete BBP, BFP & EnFP for 1 CB Stations!
ZA
.. .
ZB
Bus Diff, CB Fail & EnFP

1 Breaker Stations
up to 4/8 diameters

13
REB 670 1- Ph; BBP, BFP & EnFP for Double CB stations
ZA
ZA
.. .
.. .
ZB
ZB

up to 6 / 12 feeders

up to 12 / 24 feeders

14
ZA
.. .
ZB
Double Bus with bus-coupler CB



15
REB 670 1- Ph; BBP, BFP & EnFP for double bus & transfer
ZA
.. .
ZB
.. .
Transfer Bus
.. .
Combined Bus-Coupler
& Transfer Bay
ZA
.. .
ZB
.. .
Bus-Coupler Bay
Transfer Bay
Transfer Bus
.. .

Double Busbars with Transfer Bus

16
Scheme Layout for Double Busbar; 2 Zones/22 feeders

700
ABB
EQUIPMENT INCLUDED in the PANEL:
3 pcs 1 phase, Busbar protection terminal REB 670*1.0

- two differential zones
- check zone
- 24 BFP relays
- 24 OC feeder backup protection (EnFP)
- internal disconnector replica logic
- internal individual bay tripping logic
- disconnector status supervision

17
Main 2
Main 1
.. .
Reserve 1
.. .
Reserve 2
Four Zone Double Bus with two bus-coupler CBs and two
bus-section CBs and up to 20/21 feeder bays on each station side
Main 1
.. .
Reserve 1
Main 2
.. .
Reserve 2
Four Zone Double Bus with two BC-CBs one BS-CB and one sectionalizing
disconnector with up to 18-20 feeder bays in the whole station
18
REB 670*1.0; 1-ph version Summation Principle
REB 670; 1 Ph
2 Zones (A & B);
24 Bays
+ N times
N 8
19
Buses up to 24 bays per zone

Single Busbar
1 Breaker Systems
Double Busbar
Same applications possible as for 1Ph solution
Software Driven Zone Selection
Cost effective Solution
UserFriendliness
Pre-configured REB670 ready to use

20
Single zone applications

Two zone applications without
need for any zone selection
(e.g. 1 CB stations)
Double busbar stations with zone
selection using busbar
disconnectors a & b aux contacts
Double busbar stations with zone
selection using only busbar
disconnectors b aux contact
Direct replacement for RED 521
Available Configurations X01, X02 & X03
X01 = Just BBP for simple stations layouts (i.e. 1 CB, Double
Breaker, Single Breaker, or for double busbar-single breaker
stations where Zone Selection is done by using just b contacts).
Available for all five versions A20, A31, B20, B21 & B31.
Direct replacement for RED 521
X02 = Just BBP for double busbar-single breaker stations where

Zone Selection is done by using a&b contacts from disconnectors
and breakers. Available for versions A31, B21 & B31
X03 = BBP with BFP, EnFP & OCP for double busbar-single
breaker stations where Zone Selection is done by using a&b
contacts from disconnectors and breakers. Available for versions
A31, B21 & B31
For other station layouts or functionality CAP 531 configuration shall

be arranged by the end user.
Make country/end-customer specific solution

21

REB 670 Application

Uploaded by

Copyright:

Available Formats

REB 670 Application

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

REB 670 Application

Uploaded by

Copyright:

Available Formats

ABB Ltd.

Substation Automation Products 2007-09-11

ABB LtdBangalore., 2007

REB 670 Training

Substation Automation Products 2007-09-11

Application Areas for REB 670

Differential, BFP & Non-Dir

ABB LtdBangalore., 2007

Substation Automation Products 2007-09-11

Three-Phase Terminal; 4/8 Bays- Double Zone

REB 670; 3Ph

ABB LtdBangalore., 2007

No switching in CT secondary circuits

Substation Automation Products 2007-09-11

Single Bus with bus tie CB

ABB LtdBangalore., 2007

H type station with bus-section CB

Substation Automation Products 2007-09-11

REB 670 3- Ph, BBP, BFP, EnFP for 1 CB stations

ABB LtdBangalore., 2007

Substation Automation Products 2007-09-11

Double Breaker Station

ABB LtdBangalore., 2007

Substation Automation Products 2007-09-11

Double Bus with bus-coupler CB

ABB LtdBangalore., 2007

Isolator replica in REB 670*1.0

Double Busbars with bus coupler CB and Transfer Bus

Optional Measuring Point

Scheme Layout for Double Busbar; 2 Zones/7 feeders

EQUIPMENT INCLUDED in the PANEL:

ABB LtdBangalore., 2007

1 pcs 3 phase, Busbar protection terminal REB 670*1.0

Substation Automation Products 2007-09-11

Single-Phase Terminal; 12/24 Bays- Double Zone

REB 670; Ph-L2

REB 670; Ph-L3

ABB LtdBangalore., 2007

2 Zones (A & B);

Substation Automation Products 2007-09-11

No switching in CT secondary circuits

ABB LtdBangalore., 2007

Single Bus with bus-section disconnector

Single Bus with bus-section CB, up to

Substation Automation Products 2007-09-11

Single Bus with bus-section CB

REB 670 1- Ph; BBP applications for 1 CB stations

ABB LtdBangalore., 2007

Substation Automation Products 2007-09-11

ABB LtdBangalore., 2007

Bus Diff, CB Fail & EnFP

Substation Automation Products 2007-09-11

Double Breaker Station

Double Breaker Station

ABB LtdBangalore., 2007

Substation Automation Products 2007-09-11

Double Bus with bus-coupler CB

ABB LtdBangalore., 2007

Isolator replica in REB 670*1.0