GP15A Thru GP15M: Vishay General Semiconductor

GP15A thru GP15M
Vishay General Semiconductor
Glass Passivated Junction Rectifier

FEATURES
SUPERECTIFIER
Superectifier
application
structure
for
high
reliability
Cavity-free glass-passivated junction

Low forward voltage drop
Low leakage current, IR less than 0.1 A
High forward surge capability
Meets environmental standard MIL-S-19500
DO-204AC (DO-15)
Solder dip 275 C max. 10 s, per JESD 22-B106

AEC-Q101 qualified
Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
IF(AV)
1.5 A
VRRM
50 V to 1000 V
IFSM
50 A
IR
5.0 A
VF
1.1 V
TJ max.
175 C
For use in general purpose rectification of power supplies,

inverters, converters and freewheeling diodes for both
consumer and automotive applications.
MECHANICAL DATA
Case: DO-204AC, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 C unless otherwise noted)

PARAMETER
SYMBOL
GP15A
GP15B
GP15D
GP15G
GP15J
GP15K GP15M
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Maximum average forward rectified current

0.375" (9.5 mm) lead length at TA = 55 C
IF(AV)
1.5
Peak forward surge current 8.3 ms single half-sine

wave superimposed on rated load
IFSM
50
Maximum full load reverse current, full cycle

average 0.375" (9.5 mm) lead length at TA = 55 C
IR(AV)
100
Operating junction and storage temperature range
TJ, TSTG
- 65 to + 175
Document Number: 88638

Revision: 15-Mar-11
UNIT
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
This datasheet has been downloaded from http://www.digchip.com at this page
GP15A thru GP15M

ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum
instantaneous
forward voltage
1.5 A
SYMBOL
GP15A
GP15B
GP15D
GP15G
VF
Maximum reverse
current at rated DC
blocking voltage
GP15J
GP15K
GP15M
1.1
TA = 25 C
UNIT
V
5.0
IR
TA = 150 C
200
Typical reverse
recovery time
IF = 0.5 A, IR = 1.0 V,
Irr = 0.25 A
trr
3.5
Typical junction
capacitance
4.0 V, 1 MHz
CJ
15
pF
THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted)

PARAMETER
SYMBOL
Typical thermal resistance
GP15A
GP15B
GP15D
GP15G
RJA
(1)
45
RJL
(1)
20
GP15J
GP15K
GP15M
UNIT
C/W
Note
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted
ORDERING INFORMATION (Example)

PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.425
54
4000
13" diameter paper tape and reel
0.425
73
2000
Ammo pack packaging
GP15J-E3/54
GP15J-E3/73
(1)
0.425
54
4000
13" diameter paper tape and reel
GP15JHE3/73 (1)
0.425
73
2000
Ammo pack packaging
GP15JHE3/54
Note
AEC-Q101 qualified
(1)
RATINGS AND CHARACTERISTICS CURVES

(TA = 25 C unless otherwise noted)
50
Peak Forward Surge Current (A)
Average Forward Current (A)
1.50
1.25
1.00
0.75
0.50
60 Hz
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
0.25
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
40
30
20
10
0
0
25
50
75
100
125
150
175
10
100
Ambient Temperature (C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current
www.vishay.com
2
Revision: 15-Mar-11
GP15A thru GP15M

100
TJ = 150 C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
10
Pulse Width = 300 s

1 % Duty Cycle
TJ = 25 C
0.1
0.01
0.4
10
1
0.6
0.8
1.0
1.2
1.4
1.6
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
100
Transient Thermal Impedance (C/W)
10
Instantaneous Reverse Current (A)
TJ = 25 C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 125 C
TJ = 75 C
0.1
TJ = 25 C
0.01
0
20
40
60
80
10
0.1
0.01
100
0.1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-204AC (DO-15)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
DIA.
1.0 (25.4)
MIN.

Revision: 15-Mar-11
www.vishay.com
3
Legal Disclaimer Notice

www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customers responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12

GP15A Thru GP15M: Vishay General Semiconductor

Uploaded by

Copyright:

Available Formats

GP15A Thru GP15M: Vishay General Semiconductor

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GP15A Thru GP15M: Vishay General Semiconductor

Uploaded by

Copyright:

Available Formats

GP15A thru GP15M

Vishay General Semiconductor

Glass Passivated Junction Rectifier

Cavity-free glass-passivated junction

Solder dip 275 C max. 10 s, per JESD 22-B106

For use in general purpose rectification of power supplies,

MAXIMUM RATINGS (TA = 25 C unless otherwise noted)

Maximum repetitive peak reverse voltage

Maximum RMS voltage

Maximum DC blocking voltage

Maximum average forward rectified current

Peak forward surge current 8.3 ms single half-sine

Maximum full load reverse current, full cycle

Operating junction and storage temperature range

Document Number: 88638

This datasheet has been downloaded from http://www.digchip.com at this page

GP15A thru GP15M

THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted)

Typical thermal resistance

ORDERING INFORMATION (Example)

UNIT WEIGHT (g)

PREFERRED PACKAGE CODE

13" diameter paper tape and reel

Ammo pack packaging

13" diameter paper tape and reel

Ammo pack packaging

RATINGS AND CHARACTERISTICS CURVES

Peak Forward Surge Current (A)

Average Forward Current (A)

Ambient Temperature (C)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current

GP15A thru GP15M

Junction Capacitance (pF)

Instantaneous Forward Current (A)

Pulse Width = 300 s

Instantaneous Forward Voltage (V)

Reverse Voltage (V)

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 5 - Typical Junction Capacitance

Transient Thermal Impedance (C/W)

Instantaneous Reverse Current (A)

Percent of Rated Peak Reverse Voltage (%)

t - Pulse Duration (s)

Fig. 4 - Typical Reverse Characteristics

Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Document Number: 88638

Legal Disclaimer Notice

Material Category Policy

Document Number: 91000

You might also like