Scribd Logo
Upload

Welcome to Scribd!

  • 208 views

    m10 BW

    Uploaded by

    Miguel Callata
    The document describes a semi-welded plate heat exchanger, including its applications, standard design, materials, dimensions, and working principle. It is used for heating and cooling aggressive media and in refrigeration installations. The heat exchanger consists of alternating welded and gasketed channels to allow for serviceability while preventing leakage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    m10 BW

    Uploaded by

    Miguel Callata
    208 views2 pages
    The document describes a semi-welded plate heat exchanger, including its applications, standard design, materials, dimensions, and working principle. It is used for heating and cooling aggressive media and in refrigeration installations. The heat exchanger consists of alternating welded and gasketed channels to allow for serviceability while preventing leakage.

    Original Description:

    intercambiador de placas alfa laval

    Original Title

    m10-bw

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a semi-welded plate heat exchanger, including its applications, standard design, materials, dimensions, and working principle. It is used for heating and cooling aggressive media and in refrigeration installations. The heat exchanger consists of alternating welded and gasketed channels to allow for serviceability while preventing leakage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    208 views2 pages

    m10 BW

    Uploaded by

    Miguel Callata
    The document describes a semi-welded plate heat exchanger, including its applications, standard design, materials, dimensions, and working principle. It is used for heating and cooling aggressive media and in refrigeration installations. The heat exchanger consists of alternating welded and gasketed channels to allow for serviceability while preventing leakage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    .

    M10-BW
    Semi-welded plate heat exchanger

    Applications
    Heating and cooling of aggressive media. Duties in
    refrigeration installations.
    Standard design
    The plate heat exchanger consists of a pack of corrugated
    metal plates with portholes for the passage of the two fluids
    between which heat transfer will take place.
    The plate pack is assembled between a fix frame plate and
    a movable pressure plate and compressed by tightening
    bolts. The semi-welded plates combine the flexibility and
    serviceability of the gasketed heat exchangers with the
    assurance against leakage of the welded heat exchangers.
    In the plate arrangement, every other channel is welded,
    and every other channel is gasketed. The number of plates
    is determined by the flow rate, physical properties of the
    fluids, pressure drop and temperature program. The plate
    corrugations promote fluid turbulence and support the plates
    against differential pressure.
    The semi-welded plate heat exchanger is provided with
    gaskets specifically designed to resist aggressive media.
    The non-aggressive med ia flows in the gasketed channels.
    This construction means that it can easily be dismantled, for
    example for exchanging gaskets or for inspection and cleaning
    . the gasketed channels.
    of

    M10-BW

    Corrosion-resistant plate materials, the absence of pressure


    retaining welds, double gasket seals, and a flexible yet
    vibration resistant design - to assure long life and trouble free
    operation.
    The frame plate and the pressure plate are suspended from an
    upper carrying bar and located by a lower guiding bar, both of
    which are fixed to a support column. Connections are located
    in the frame plate or, if either or both fluids make more than a
    single pass within the unit, in the frame and pressure plates.
    Typical capacities
    Liquid flow rate
    Up to 50 kg/s (800 gpm), depending on media, permitted
    pressure drop and temperature program.
    Refrigeration duties
    50-250 RT / 175-875 kW
    Plate types
    M10-BW
    Frame types
    FG, FD, FT, REF and FX

    Cross section of a semi-welded plate heat exchanger

    Dimensions

    STANDARD MATERIALS
    Frame plate
    Mild steel, Epoxy painted

    W
    225 (8.9") or
    231(9.1")

    Nozzles
    Metal lined: Stainless steel, Titanium, SMO, Alloy C276
    H
    719 (28.3")

    Plates
    Stainless steel: Alloy 304, Alloy 316, Titanium, Alloy 254
    (SMO), Alloy C276
    Gaskets
    Field gaskets:

    Nitrile, EPDM, Chloroprene, Viton,


    FEPMAL
    Ring gaskets:
    Nitrile, EPDM, Chloroprene, Viton,
    FEPMAL
    Other grades and material available on request.
    For refrigeration: Gasket design temperature range
    -45C to 150C

    695-2400 (27-95")

    Measurements mm (inch)
    Type
    M10-FG
    M10-FD
    M10-FD ASME
    M10-REF
    M10-FT
    M10-FX

    TECHNICAL DATA
    Pressure vessel codes, PED, ASME, pvcALS
    Mechanical design pressure (g) / temperature
    FG
    FG
    FG
    FD
    FD
    FD
    FDR
    FT
    FT
    REF
    FX

    pvcALS
    PED
    ASME
    pvcALS
    PED
    ASME
    PED
    PED
    ASME
    PED
    PED

    1.6 MPa / -50 to 180C


    1.6 MPa / -10 to 180C
    150 psig / -54F to 482F
    2.5 MPa / -50 to 180C
    2.5 MPa / -50 to 180C
    300 psig / -54F to 482F
    2.5MPa / -50 to 160C
    4.0 MPa / -50 to 180C
    600 psig / -54F to 482F
    2.5 MPa / -50 to 150C
    5.5 MPa / -50 to 150C

    pvcALS
    PED
    ASME
    pvcALS
    PED
    ASME
    PED
    ASME
    PED
    PED

    100
    100
    4
    100
    100
    4
    100
    4
    100
    100

    DIN PN16, ASME CI. 150, JIS 16K


    DIN PN 16, ASME CI. 150
    ASME CI. 150
    DIN PN25, ASME CI. 150, JIS 20K
    DIN PN25, ASME CI. 150
    ASME CI. 300
    DIN PN40, ASME CI. 300
    RLF
    DIN PN25
    DIN PN 16, PN25, PN63

    mm
    mm
    mm
    mm
    mm
    mm
    mm

    470
    470
    470
    470
    470
    470

    W
    (18.5")
    (18.5")
    (18.5")
    (18.5")
    (18.5")
    (18.5")

    215
    131
    215
    163
    215
    215

    The number of tightening bolts may vary depending on pressure rating.

    Maximum heat transfer surface


    100m (825 sq. ft)
    Particulars required for quotation
    - Flow rates or heat load
    - Temperature program
    - Physical properties of liquids in question (if not water)
    - Desired working pressure
    - Maximum permitted pressure drop
    - Available steam pressure

    Connections
    FG
    FG
    FG
    FD
    FD
    FD
    FT
    FT
    REF
    FX

    H
    1084 (42.7")
    981 (38.6")
    1084 (42.7")
    1110 (43.7")
    1084 (42.7")
    1133 (44.6")

    RLF in pressure plate: M10-FG, M10-FD, M10-FT/PED, M10-FX/PED


    RLF = Rectangular loose flange

    Working principle
    Channels are formed between the plates and the corner ports
    are arranged so that the two media flow through alternate
    channels. The heat is transferred through the plate between
    the channels, and complete counter-current flow is created
    for highest possible efficiency. The corrugation of the plates
    provides the passage between the plates, supports each
    plate against the adjacent one and enhances the turbulence,
    resulting in efficient heat transfer.

    Flow principle of a plate heat exchanger


    .

    PCT00134EN 1306

    How to contact Alfa Laval


    Up-to-date AlfaLaval contact details for
    all countries are always available on our
    website on www.alfalaval.com

    Alfa Laval reserves the right to change specifications without prior notification.

    h
    (8.5")
    (5.2")
    (8.5")
    (6.4")
    (8.5")
    (8.5")

    You might also like