Power Supply Unit - QUINT-PS-100-240AC/24DC/20 - 2938620: Key Commercial Data

https://www.phoenixcontact.
com/us/products/2938620
Power supply unit-QUINT-PS-100-240AC/24DC/20-2938620

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
DIN rail power supply unit 24 V DC/20 A, primary switched-mode, 1-phase.
Product Description
QUINT POWER is the powerful 60 - 960 W DC power supply unit for universal use. With its wide-range input, single and three-phase versions, and
international approval package, this solution is unrivalled. QUINT POWER provides reliable power supply: generously dimensioned capacitors ensure
mains buffering of over 20ms at full load. Full output power is provided by all three-phase devices, even in the event of a permanent phase failure.
The Power Boost power reserve easily starts loads with high inrush currents and ensures that fuses are reliably tripped. Preventive function monitoring
diagnoses impermissible operating states and minimizes downtimes in your system. Remote monitoring is provided by an active transistor switching
output and a floating relay contact. All devices are idling-proof and short-circuit-proof, and are available with a regulated and adjustable output voltage
of 12, 24, and 48 V DC with output currents of 2.5, 5, 10, 20, 30, and 40 A. Power supply units for use in Ex zone 2, uninterruptible solutions, AS-i power
supply units, and a QUINT diode complete this comprehensive product range.
Key Commercial Data

Packing unit
1 pc
Weight per Piece (excluding packing)
3060.0 g
Custom tariff number
85044030
Country of origin
Thailand
Technical data
Dimensions
Width
157 mm
Height
130 mm
Depth
125 mm
Width with alternative assembly
122 mm
Height with alternative assembly
130 mm
Depth with alternative assembly
160 mm
Ambient conditions
Degree of protection
IP20
07/20/2015Page1/8
https://www.phoenixcontact.com/us/products/2938620

Technical data
Ambient conditions
Ambient temperature (operation)
-25 C ... 70 C (> 60 C Derating: 2,5 %/K)
Ambient temperature (storage/transport)
-40 C ... 85 C
Max. permissible relative humidity (operation)
95 % (at 25 C, non-condensing)
Noise immunity
EN 61000-6-2:2005
Input data
Nominal input voltage range
100 V AC ... 240 V AC
Input voltage range
85 V AC ... 264 V AC
90 V DC ... 350 V DC
AC frequency range
45 Hz ... 65 Hz
Frequency range DC
0 Hz
Nominal power consumption
480 W
Inrush surge current
< 15 A (typical)
Power failure bypass
> 25 ms (120 V AC)

> 25 ms (230 V AC)
Input fuse
12 A (slow-blow, internal)
Choice of suitable fuses
10 A ... 16 A (Characteristics B, C, D, K)
Type of protection
Transient surge protection
Protective circuit/component
Varistor
Output data
Nominal output voltage
24 V DC 1%
Setting range of the output voltage
22.5 V DC ... 28.5 V DC
Nominal output current
20 A (up to 60C)
POWER BOOST
26 A
Derating
60 C ... 70 C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
Yes
Max. capacitive load
Unlimited
Active current limitation
Approx. IBOOST = 26 A (for short-circuit)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)

< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage 10 %)
Residual ripple
< 10 mVPP (with nominal values)
Output current
20 A (up to 60C)
Output power
480 W
Typical response time
<1s
Peak switching voltages nominal load
< 30 mVPP (20 MHz)

07/20/2015Page2/8

Technical data
Output data
Maximum power dissipation NO-Load
<3W
Power loss nominal load max.
< 44 W
General
Net weight
2.5 kg
Operating voltage display
Green LED
Efficiency
> 92 %
Insulation voltage input/output
4 kV AC (type test)
2 kV AC (routine test)
Protection class
I (with PE connection)
MTBF (IEC 61709, SN 29500)
> 500000 h
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
Can be aligned: Horizontally 0 mm, vertically 50 mm
Electromagnetic compatibility
Conformance with EMC directive 89/336/EC
Noise emission
EN 55011 (EN 55022)
Standard Electrical equipment of machines
EN 60204-1
Standard - Safety of transformers
EN 61558-2-17
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)

EN 61558-2-17
Shipbuilding approval
Germanischer Lloyd (EMC 2), ABS
Standard Electronic equipment for use in electrical power installations

and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard Safety extra-low voltage
EN 60950-1 (SELV)
EN 60204 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard Protection against shock currents, basic requirements for

protective separation in electrical equipment
EN 50178
Standard Limitation of mains harmonic currents
EN 61000-3-2
Standard - Equipment safety
GS (tested safety)
Information technology equipment - safety (CBscheme)
CB Scheme
UL approvals
UL/C-UL listed UL 508

UL/C-UL Recognized UL 60950
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous
Location)
Surge voltage category
III
Connection data, input

Connection method
Screw connection
Conductor cross section solid min.
0.2 mm
07/20/2015Page3/8

Technical data
Connection data, input
Conductor cross section solid max.
6 mm
Conductor cross section flexible min.
0.2 mm
Conductor cross section flexible max.
4 mm
Conductor cross section AWG min.
24
Conductor cross section AWG max.
10
Stripping length
8 mm
Screw thread
M3
Connection data, output

Connection method
Screw connection
0.5 mm
16 mm
0.5 mm
10 mm
20
Stripping length
10 mm
Screw thread
M4
Signaling
Output name
DC OK active
Output description
UOUT > 0.9 x UN: High signal
Maximum switching voltage
24 V
Output voltage
+ 24 V DC (Signal)
Maximum inrush current
40 mA
Continuous load current
40 mA
Status display
"DC OK" LED green
Note on status display
UOUT < 0.9 x UN: LED flashing
0.5 mm
16 mm
0.5 mm
10 mm
20
Tightening torque, min
1.2 Nm
Tightening torque max
1.5 Nm
Screw thread
M4
Output name
DC OK floating
07/20/2015Page4/8

Technical data
Signaling
Output description
Relay contact, UOUT > 0.9 x UN: Contact closed
Maximum switching voltage
30 V AC/DC
Maximum inrush current
1A
Continuous load current
1A
Status display
"DC OK" LED green
Classifications
eCl@ss
eCl@ss 4.0
27040702
eCl@ss 4.1
27040702
eCl@ss 5.0
27242213
eCl@ss 5.1
27242213
eCl@ss 6.0
27049005
eCl@ss 7.0
27049002
eCl@ss 8.0
27049002
ETIM
ETIM 2.0
EC001039
ETIM 3.0
EC001039
ETIM 4.0
EC000599
ETIM 5.0
EC002540
UNSPSC
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
UNSPSC 11
39121004
UNSPSC 12.01
39121004
UNSPSC 13.2
39121004
Approvals
Approvals
Approvals
UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / DNV / IECEE CB Scheme / cUL Recognized / DNV / EAC / EAC / cULus Recognized /
cULus Listed
07/20/2015Page5/8

Approvals
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approvals submitted
Approval details
UL Recognized
UL Listed
cUL Recognized
cUL Listed
GL
DNV
IECEE CB Scheme
cUL Recognized
DNV
07/20/2015Page6/8

Approvals
EAC
EAC
cULus Recognized
cULus Listed
Accessories
Accessories
Assembly adapter
Assembly adapters-UWA 182/52-2938235
Universal wall adapter
Mounting rail adapter

Assembly adapters-UTA 107-2853983
Universal DIN rail adapter
Drawings
07/20/2015Page7/8

Block diagram
L (+)
active
N (-)
PE
PFC
DC OK
13
14
Phoenix Contact 2015 - all rights reserved

http://www.phoenixcontact.com
07/20/2015Page8/8

Power Supply Unit - QUINT-PS-100-240AC/24DC/20 - 2938620: Key Commercial Data

Uploaded by

Copyright:

Available Formats

Power Supply Unit - QUINT-PS-100-240AC/24DC/20 - 2938620: Key Commercial Data

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Power Supply Unit - QUINT-PS-100-240AC/24DC/20 - 2938620: Key Commercial Data

Uploaded by

Copyright:

Available Formats

https://www.phoenixcontact.

Power supply unit-QUINT-PS-100-240AC/24DC/20-2938620

DIN rail power supply unit 24 V DC/20 A, primary switched-mode, 1-phase.

Key Commercial Data

Weight per Piece (excluding packing)

Custom tariff number

Width with alternative assembly

Height with alternative assembly

Depth with alternative assembly

Power supply unit-QUINT-PS-100-240AC/24DC/20-2938620

-25 C ... 70 C (> 60 C Derating: 2,5 %/K)

Ambient temperature (storage/transport)

Max. permissible relative humidity (operation)

100 V AC ... 240 V AC

Input voltage range

Nominal power consumption

Inrush surge current

Power failure bypass

> 25 ms (120 V AC)

Choice of suitable fuses

Transient surge protection

Setting range of the output voltage

22.5 V DC ... 28.5 V DC

Nominal output current

Yes, for redundancy and increased capacity

Max. capacitive load

Active current limitation

Approx. IBOOST = 26 A (for short-circuit)

< 1 % (change in load, static 10 % ... 90 %)

< 10 mVPP (with nominal values)

Typical response time

Peak switching voltages nominal load

< 30 mVPP (20 MHz)

Power supply unit-QUINT-PS-100-240AC/24DC/20-2938620

Power loss nominal load max.

Operating voltage display

Insulation voltage input/output

MTBF (IEC 61709, SN 29500)

horizontal DIN rail NS 35, EN 60715

Can be aligned: Horizontally 0 mm, vertically 50 mm

Conformance with EMC directive 89/336/EC

EN 55011 (EN 55022)

Standard Electrical equipment of machines

Standard - Safety of transformers

Standard - Electrical safety

EN 60950-1/VDE 0805 (SELV)

Germanischer Lloyd (EMC 2), ABS

Standard Electronic equipment for use in electrical power installations

EN 50178/VDE 0160 (PELV)

Standard Safety extra-low voltage

Standard - Safe isolation

DIN VDE 0100-410

Standard Protection against shock currents, basic requirements for

Standard Limitation of mains harmonic currents

Standard - Equipment safety

Information technology equipment - safety (CBscheme)

UL/C-UL listed UL 508

Surge voltage category