Scribd Logo
Upload

Welcome to Scribd!

  • 565 views

    دورة تدريبية علي برنامج arc gis 8

    Uploaded by

    mahmoud abdelrahman
    This document discusses ArcGIS and 3D modeling. It describes how Arc Scene can be used to represent the earth's surface in 3D using point data, contour lines, or elevation rasters. It explains that each feature class in Arc Scene has two tables - one for attributes and one hidden one for X,Y,Z coordinates. The document gives steps for deriving a 3D surface from point data, which involves opening Arc Scene and adding the point feature class.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    دورة تدريبية علي برنامج arc gis 8

    Uploaded by

    mahmoud abdelrahman
    565 views9 pages
    This document discusses ArcGIS and 3D modeling. It describes how Arc Scene can be used to represent the earth's surface in 3D using point data, contour lines, or elevation rasters. It explains that each feature class in Arc Scene has two tables - one for attributes and one hidden one for X,Y,Z coordinates. The document gives steps for deriving a 3D surface from point data, which involves opening Arc Scene and adding the point feature class.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses ArcGIS and 3D modeling. It describes how Arc Scene can be used to represent the earth's surface in 3D using point data, contour lines, or elevation rasters. It explains that each feature class in Arc Scene has two tables - one for attributes and one hidden one for X,Y,Z coordinates. The document gives steps for deriving a 3D surface from point data, which involves opening Arc Scene and adding the point feature class.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    565 views9 pages

    دورة تدريبية علي برنامج arc gis 8

    Uploaded by

    mahmoud abdelrahman
    This document discusses ArcGIS and 3D modeling. It describes how Arc Scene can be used to represent the earth's surface in 3D using point data, contour lines, or elevation rasters. It explains that each feature class in Arc Scene has two tables - one for attributes and one hidden one for X,Y,Z coordinates. The document gives steps for deriving a 3D surface from point data, which involves opening Arc Scene and adding the point feature class.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﺍﳉﻠﺴﺔ ﺍﻟﺜﺎﻣﻨﺔ ﻋﺸﺮﺓ‪:Session 18:‬‬


    ‫‪ESRI ARC GIS 8.3.‬‬
    ‫ﻣﻮﺿﻮﻉ ﺍﻟـ‪ :3D Analyst‬ﺳﻨﺘﻌﺮﻑ ﻫﻨﺎ ﻋﻠﻰ ﺍﻟﻮﺍﺟﻬﺔ ﺍﻟﺘﻄﺒﻴﻘﻴﺔ ‪:Arc Scene‬‬
    ‫ﺍﶈﻮﺭ ﺍﻟﺜﺎﻟﺚ ﺍﳉﺪﻳﺪ ﻭﺍﻟﺬﻱ ﳓﻦ ﺑﺼﺪﺩﻩ ﻫﻮ ﺍﻟﺘﺤﻠﻴﻞ ﺛﻼﺛﻲ ﺍﻷﺑﻌﺎﺩ ‪:3D Analyst‬‬
    ‫ﻣﻘﺪﻣﺔ‪:‬‬
    ‫‪: Arc GIS‬ﻳﺘﻌﺎﻣﻞ ﻣﻊ‪:‬‬
    ‫‪ -١‬ﻣﺴﺎﺣﺔ ﺭﺳﻢ‪.‬‬
    ‫‪ -٢‬ﻗﺎﻋﺪﺓ ﺑﻴﺎﻧﺎﺕ ‪.‬‬
    ‫ﻣﻔـﺎﻫـﻴﻢ‪:‬ﻛﻤﺎ ﻧﻌﺮﻑ‪:‬‬
    ‫‪-١‬ﺍﻟﺮﻗﻤﻨﺔ‪ :‬ﲢﻮﻳﻞ ﺍﳌﺨﻄﻄﺎﺕ ﻣﻦ ‪ Raster‬ﺇﱃ ‪Vector‬‬
    ‫ﻣﺜﺎﻝ‪ :‬ﺻﻮﺭﺓ ‪ ---‬ﺇﱃ ‪.Cad‬‬
    ‫‪ -٢‬ﺍﻷﲤﺘﺔ‪ :‬ﻋﺒﺎﺭﺓ ﻋﻦ ﺗﺰﻭﻳﺪ ﺍﳌﺨﻄﻄﺎﺕ ﺍﻟﺮﻗﻤﻴﺔ ﺑﺒﻴﺎﻧﺎﺕ ﻭﺻﻔﻴﺔ‪.‬‬
    ‫ﻟﻜﻞ ﺷﺮﳛﺔ ﺟﺪﻭﻝ ﺑﺸﻜﻞ ﻋﺎﻡ)ﻗﺒﻠﻨﺎ ‪‬ﺬﺍ ﰲ ﺍﳌﺴﺘﻮﻱ ﺍﻷﻭﻝ( ‪ .‬ﻭﻟﻜﻦ ﰲ ﺍﻟـ‪ arc scene‬ﻟﻜﻞ ﺷﺮﳛﺔ ﺟﺪﻭﻟﲔ‪.‬‬
    ‫‪ Gis‬ﻳﻔﺼﻞ ﺍﳋﻄﻮﻁ ﻋﻦ ﺍﳌﻀﻠﻌﺎﺕ ﻭﻋﻦ ﺍﻟﻨﻘﺎﻁ‪.‬‬
    ‫ﻣﺜﻠﹰﺎ‪ :‬ﺻﻮﺭﺓ ﳌﺨﻄﻂ ﺃﻭﳌﻨﻄﻘﺔ ﻣﺎ ﺗﻀﻢ‪ :‬ﺷﺮﳛﺔ ﻣﻀﻠﻌﺎﺕ )ﻟﻠﻌﻘﺎﺭﺍﺕ(‪ -‬ﺷﺮﳛﺔ ﺧﻄﻮﻁ)ﺍﻟﺸﻮﺍﺭﻉ(‪-‬ﺷﺮﳛﺔ ﻧﻘﺎﻁ)ﺃﺑﺎﺭ(‪.‬‬
    ‫ﻳﻔﻀﻞ ﺇﺭﺟﺎﻉ ﺍﻟﺼﻮﺭﺓ ﺃﻭﻻ ﻭﻣﻦ ﰒ ﺍﻟﺮﺳﻢ ﻋﻠﻴﻬﺎ ﲢﺎﺷﻴﺎﹰ ﻹﺭﺟﺎﻉ ﻛﻞ ﺷﺮﳛﺔ ﻣﺴﺘﻘﺒﻼﹰ ﺟﺪﻳﺪﺓ ﻳﺘﻢ ﺍﻟﻌﻤﻞ ﻋﻠﻴﻬﺎ ﻟﻮﺣﺪﻫﺎ ‪.‬‬
    ‫ﻟﺪﻳﻨﺎ ﻛﻤﺎ ﺫﻛﺮﻧﺎ ﺟﺪﻭﻟﲔ ﻟﻜﻞ ﺷﺮﳛﺔ‪.‬‬
    ‫ﺟﺪﻭﻝ ﺍﻟﺸﺮﳛﺔ ﺍﻷﺳﺎﺳﻴﺔ ‪ :‬ﻭﳛﺘﻮﻱ ﻋﻠﻰ ﺍﺳﻄﺮ ﻛﻞ ﺳﻄﺮ ﳝﺜﻞ ﲰﺔ‪.‬‬
    ‫ﻭﻟﻪ ﺛﻼﺛﺔ ﺣﻘﻮﻝ‪.‬‬
    ‫‪ID‬‬ ‫‪SHAPE‬‬ ‫‪NAME‬‬
    ‫‪A1‬‬
    ‫‪A2‬‬
    ‫‪A3‬‬

    ‫ﺍﳉﺪﻭﻝ ﺍﻟﺜﺎﱐ ﳐﻔﻲ‪:‬ﻭﻟﻪ ﺍﳊﻘﻮﻝ ﺍﻟﺘﺎﻟﻴﺔ‪:‬‬


    ‫‪ID‬‬ ‫‪X‬‬ ‫‪Y‬‬ ‫‪Z‬‬ ‫‪M‬‬

    ‫‪ Z,M‬ﻳﺘﻢ ﻣﻠﺆﻫﺎ ﻣﻦ ﻗﺒﻞ ﺍﳌﺴﺘﺨﺪﻡ ﻭﺣﺴﺐ ﺍﺧﺘﻴﺎﺭﻩ‪.‬‬


    ‫‪ XYZ‬ﻳﺘﻢ ﲣﺰﻳﻨﻬﺎ ﰲ ﺍﳉﺪﻭﻝ ﺍﳌﺨﻔﻲ‪.‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﺑﺪﺀ ﺍﻟﻌﻤﻞ‪:‬‬
    ‫ﻧﻔﺘﺢ ﺍﻟـ‪:Arc Scene‬‬
    ‫ﰲ ‪Arc GIS‬ﻳﺘﻢ ﲤﺜﻴﻞ ﺳﻄﺢ ﺍﻷﺭﺽ ﺑﺸﻜﻞ ﺛﻼﺛﻲ ﺃﺑﻌﺎﺩ ﺍﻋﺘﻤﺎﺩﺍﹰ ﻋﻠﻰ ﺍﳊﺎﻻﺕ ﺍﻟﺘﺎﻟﻴﺔ‪:‬‬
    ‫‪ -١‬ﺍﳊﺼﻮﻝ ﻋﻠﻰ ﺷﺮﳛﺔ ﻧﻘﻄﻴﺔ ﺛﻼﺛﻴﺔ ﺍﻷﺑﻌﺎﺩ ﻣﺄﺧﻮﺫﺓ ﻣﻦ ‪ GPS‬ﻭﻣﻨﻬﺎ ﻧﺸﺘﻖ ﺳﻄﺢ ﺍﻷﺭﺽ ‪.‬‬
    ‫‪ -٢‬ﺍﳊﺼﻮﻝ ﻋﻠﻰ ﺷﺮﳛﺔ ‪ Contours‬ﻭﻣﻨﻬﺎ ﻧﺸﺘﻖ ﺳﻄﺢ ﺍﻷﺭﺽ ‪.‬‬
    ‫‪ -٣‬ﺍﳊﺼﻮﻝ ﻋﻠﻰ ﺷﺮﳛﺔ ‪) Elevation‬ﺍﺭﺗﻔﺎﻋﺎﺕ(‪).‬ﺻﻮﺭﺓ ﻓﻀﺎﺋﻴﺔ ﻋﻦ ﻃﺮﻳﻖ ﺍﻻﺳﺘﺸﻌﺎﺭ ﻋﻦ ﺑﻌﺪ( ﻭﻣﻨﻬﺎ ﻧﺸﺘﻖ ﺳﻄﺢ ﺍﻷﺭﺽ‪.‬‬

    ‫ﺳﻨﺪﺭﺱ ﺣﺎﻟﺔ ﺍﻻﺷﺘﻘﺎﻕ ﻣﻦ ﺷﺮﳛﺔ ﻧﻘﻄﻴﺔ‪:‬‬


    ‫ﻻﺷﺘﻘﺎﻕ ﺳﻄﺢ ﺍﻷﺭﺽ ﻧﺘﺒﻊ ﺍﳋﻄﻮﺍﺕ ﺍﻟﺘﺎﻟﻴﺔ‪:‬‬
    ‫‪ -١‬ﻧﻔﺘﺢ ﺍﻟـ‪. Arc Scene‬‬
    ‫‪ -٢‬ﻧﻘﻮﻡ ﺑﺈﺿﺎﻓﺔ ﺍﻟﺸﺮﳛﺔ ﺍﻟﻨﻘﻄﻴﺔ ﻣﻦ ﺍﳌﺴﺎﺭ‪:‬‬
    ‫‪Drive:\arcexe83\arctutorial\3danalyst\maspoint\Tin1.‬‬
    ‫ﺷﺮﻳﻂ ﺍﻷﺩﻭﺍﺕ ‪ Tools‬ﺍﳌﺴﺘﺨﺪﻡ ﻏﻲ ﺍﳌﻌﻴﻨﺔ ﺍﳌﻨﻈﻮﺭﻳﺔ ﺛﻼﺛﻴﺔ ﺍﻷﺑﻌﺎﺩ‪ :‬ﺍﻷﻳﻘﻮﻧﺎﺕ ﻣﻦ ﺍﻟﻴﺴﺎﺭ ﻟﻠﻴﻤﲔ‪:‬‬
    ‫‪ :Navigate -١‬ﺍﻹﲝﺎﺭ ‪).‬ﻳﺘﻢ ﲢﺮﻳﻚ ﺑﺎﻟﺰﺭ ﺍﻷﻳﺴﺮ ﻭﺍﻟﺘﻜﺒﲑ ﻭﺍﻟﺘﺼﻐﲑ ﺑﺎﻟﺰﺭ ﺍﻷﳝﻦ ﺍﻭ ﺑﺎﻟﺪﻭﻻﺏ(‪.‬‬
    ‫‪:Fly -٢‬ﺍﻟﻄﲑﺍﻥ ﻓﻮﻕ ﺍﳌﻨﻄﻘﺔ ﺑﺸﻜﻞ ﺛﻼﺛﻲ ﺃﺑﻌﺎﺩ ﺣﻴﺚ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺯﺭ ﺍﻟﻔﺄﺭﺓ ﺍﻟﻴﺴﺎﺭﻱ ﻳﺰﻳﺪ ﺍﻟﺴﺮﻋﺔ ﻭﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺯﺭ ﺍﻟﻔﺄﺭﺓ‬
    ‫ﺍﻷﳝﻦ‬
    ‫ﻳﻨﻘﺺ ﺍﻟﺴﺮﻋﺔ‪.‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫‪. zoom in /out-٣‬‬
    ‫‪:Center on Target -٤‬‬
    ‫‪:Zoom To Target -٥‬‬
    ‫ﻻﺷﺘﻘﺎﻕ ﺳﻄﺢ ﺍﻷﺭﺽ ﻣﻦ ﺍﻟﺸﺮﳛﺔ ﺍﻟﻨﻘﻄﻴﺔ ﻧﺘﺒﻊ ﻣﺎ ﻳﻠﻲ‪:‬‬
    ‫ﻣﻦ ﺍﻟﻘﺎﺋﻤﺔ ‪----Creat/ Modifytin—3D ANALYST‬ﺍﳋﻴﺎﺭ ﺍﻷﻭﻝ ‪.Creat tin From Features‬‬
    ‫ﺗﻈﻬﺮ ﻧﺎﻓﺬﺓ‪.‬‬
    ‫ﺍﻟﺸﺮﳛﺔ ﺍﳌﺸﺘﻘﺔ‪Layers;Mass point.:‬‬
    ‫ﺣﻘﻮﻝ ﺍﻻﺭﺗﻔﺎﻉ ﺍﳌﺄﺧﻮﺫﺓ ﻣﻦ‪ Hieght Source:‬ﻭ ﻗﻴﻤﺔ ‪.Feature Z Value‬‬

    ‫ﺍﻟﺮﺳﻢ ﺑﺎﻟـ‪.Arc Map‬‬


    ‫ﺍﻻﻧﺸﺎﺀﺑﺎﻟـ ‪.Arc CATALOGE‬‬
    ‫ﺛﻼﺛﻲ ﺍﻷﺑﻌﺎﺩ ﻳﺘﻢ ﺑﺎﻟـ‪. Arc Scene‬‬
    ‫ﻣﺴﺎﻓﺔ ﺍﻟـ‪ Extrusion‬ﻫﻲ ﻣﺴﺎﻓﺔ ﺍﻟﺒﺜﻖ‪ :‬ﺍﻻﺭﺗﻔﺎﻉ‪.‬‬
    ‫ﻭﻫﻨﺎﻙ ﺍﻟـ‪.Offset‬ﺍﻟﺘﻮﺍﺯﻱ )ﺍﻟﺘﺒﺎﻋﺪ ﻋﻦ ﺳﻄﺢ ﻣﺎ(‪.‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﻳﺘﻢ ﺍﺷﺘﻘﺎﻕ ﻣﻦ ﺷﺮﳛﺔ ﺍﻟﻨﻘﻄﻴﺔ ﺑﺎﺳﻄﺢ ﻋﻠﻰ ﺷﻜﻞ ﻣﺜﻠﺜﺎﺕ‪ .‬ﻛﻤﺎ ﻧﺮﻯ ﻫﻨﺎ ﰲ ﻫﺬﺍ ﺍﻟﺸﻜﻞ‪.‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﺑﻌﺪ ﺍﺷﺘﻘﺎﻕ ﺳﻄﺢ ﺍﻷﺭﺽ ﺑﺸﺮﻁ ﺍﻥ ﺗﻜﻮﻥ ﺍﻟﺸﺮﳛﺔ ﻣﺮﺳﻮﻣﺔ ﺑﺎﻟـ‪ Arc map‬ﺟﺎﻫﺰﺓ ﻧﻀﻴﻔﻬﺎ ﻛﺎﳌﻌﺘﺎﺩ ﺍﱃ ﺍﻟـ‪Arc Scene‬‬
    ‫ﻣﻊ ﺷﺮﳛﺔ ﺍﻟـ‪.TIN1‬‬
    ‫ﻓﺘﻈﻬﺮ ﲢﺖ ﺳﻄﺢ ﺍﻟـ‪. Tin1‬ﻟﺮﻓﻌﻬﺎ ﺍﱃ ﺳﻄﺢ ﺍﻟـ‪.Tin1‬ﺳﻮﺍﺀ ﻛﺎﻧﺖ ﺻﻮﺭﺓ ﺟﻮﻳﺔ ﺍﻭ ﺷﺮﳛﺔ ﻋﻘﺎﺭﺍﺕ ﺍﻭ‪ ....‬ﻧﻘﻒ ﻋﻠﻴﻬﺎ ﺯﺭ‬
    ‫ﳝﲔ ﻓﺎﺭﺓ‪ .‬ﻭﻧﺎﺧﺬ ﺧﻮﺍﺻﻬﺎ ‪ – Properties‬ﺗﺒﻮﻳﺐ ‪ .Layer ---Base height‬ﻭﻧﺄﺧﺬ ﺍﳋﻴﺎﺭ ‪Optain Hieght‬‬
    ‫‪ .from Source from Surfaces‬ﻭﳓﺪﺩ ﺍﻟـ‪.Tin1‬‬
    ‫ﻣﻼﺣـﻈﺔ‪ :‬ﺍﺫﺍ ﻛﺎﻧﺖ ﺍﻟﺸﺮﳛﺔ ﺻﻮﺭﺓ ﺟﻮﻳﺔ ﺍﻭ ﻓﻀﺎﺋﻴﺔ ﻻ ﲢﺘﺎﺝ ﺍﱃ ‪.Extrusion‬ﺑﺜﻖ‪.‬‬
    ‫ﺍﻣﺎ ﺍﺫﺍ ﻛﺎﻧﺖ ﺷﺮﳛﺔ ﻋﻘﺎﺭﺍﺕ ﻓﺎ‪‬ﺎ ﲢﺘﺎﺝ ﺍﱃ ﺗﻌﻠﻴﻤﺔ ‪ Extrusion‬ﻭﺫﻟﻚ ﻣﻦ ﺧﻮﺍﺹ ﺍﻟﺸﺮﳛﺔ‪.‬‬

    ‫ﺍﻹﻧﺸﺎﺀ‪ :‬ﻧﻔﺘﺢ ﺍﻟـ‪ --- Arc Cataloge‬ﳎﻠﺪ ﺟﺪﻳﺪ ‪ a1‬ﻣﺜﻼﹰ‪.‬‬


    ‫ﻣﻦ ‪ ---Shapefile----New‬ﺍﺳﻢ ﺟﺪﻳﺪ ‪ .fff25.:‬ﺃﻭ ﺃﻱ ﺍﺳﻢ‪.‬‬
    ‫ﻧﺴﺘﻮﺭﺩ ﺍﻹﺣﺪﺍﺛﻴﺎﺕ ‪ Coordinate‬ﻣﻦ ‪ – Tin1‬ﺷﺮﳛﺔ ﺍﻟﺮﺳﻢ ‪ :‬ﻣﻀﻠﻌﺎﺕ ‪.Polygone‬‬
    ‫ﻭﺍﻟﺘﺤﺮﻳﺮ ‪:‬‬ ‫ﺍﻟﺮﺳﻢ‬
    ‫ﻧﻔﺘﺢ ﺍﻟـ‪.Arc map‬‬
    ‫ﻧﻀﻴﻒ ﺍﻟﺸﺮﳛﺔ ‪.fff25‬ﻧﺒﺪﺃ ‪ start editing‬ﻭﻧﺒﺪﺍ ﺑﺎﻟﺮﺳﻢ ﻭﻧﺮﺳﻢ ﺑﺎﻟﻘﻠﻢ ﻋﺪﺓ ﻣﻀﻠﻌﺎﺕ‪.‬‬
    ‫ﳓﻔﻆ ﺍﻟﺘﻌﺪﻳﻼﺕ ‪.Save editing‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﺍﻟﺮﺳﻢ ﻭﺍﻹﻧﺸﺎﺀ ﺍﻟﺜﻼﺛﻲ ﺑﻌﺪ‪:‬‬


    ‫ﻧﻔﺘﺢ ﺍﻟـ‪:Arc Scene‬‬
    ‫ﻧﻀﻴﻒ ﺍﻟﺸﺮﳛﺔ ﺍﻟﺴﺎﺑﻘﺔ ‪ fff25‬ﻣﻊ ﺷﺮﳛﺔ ‪Tin1‬ﻭ ‪Mass point‬ﻭ ‪.Photo Slide‬‬
    ‫ﻧﺪﺧﻞ ﻋﻠﻰ‪ Properties‬ﻟـ ‪ --- fff25‬ﺗﺒﻮﻳﺐ ‪ ---Basehieght‬ﻭﺍﳋﻴﺎﺭ ‪.Obtain‬‬
    ‫ﻓﺘﻠﺘﺼﻖ ﺍﻟﻌﻘﺎﺭﺍﺕ ) ﺍﳌﻀﻠﻌﺎﺕ( ﺑﺴﻄﺢ ﺍﻷﺭﺽ‪).‬ﻫﺬﻩ ﺍﳌﻀﻠﻌﺎﺕ ﺍﻋﺘﱪﻧﺎﻫﺎ ﺍﳊﺪﻭﺩ ﺍﳋﺎﺭﺟﻴﺔ ﻟﻜﺘﻞ ﺃﺑﻨﻴﺔ ﻻﺷﺘﻘﺎﻗﻬﺎ ﺣﺴﺐ ﺍﺭﺗﻔﺎﻋﺎ‪‬ﺎ(‪.‬‬
    ‫ﻧﺪﺧﻞ ﻣﺮﺓ ﺃﺧﺮﻯ ﻋﻠﻰ ﺍﳋﺼﺎﺋﺺ ‪---‬ﺗﺒﻮﻳﺐ ‪ Extrusion‬ﻭﻧﻀﻊ ﻟﻪ ﺍﻟﻘﻴﻤﺔ ‪ 600‬ﻓﻴﺘﻢ ﺍﻟﺒﺜﻖ‪ :‬ﺍﺭﺗﻔﺎﻉ ﺍﻟﻜﺘﻞ‪.‬‬
    ‫ﻧﺪﺧﻞ ﻣﺮﺓ ﺛﺎﻟﺜﺔ ﻋﻠﻰ ﺍﳋﺼﺎﺋﺺ ﻣﻦ ﺗﺒﻮﻳﺐ ‪ --- Base height‬ﻭﻧﻐﲑ ﻗﻴﻤﺔ ﺍﻟـ‪ Offset‬ﻭﻧﻀﻊ ﺍﻟﻘﻴﻤﺔ ‪.600‬ﻧﻼﺣﻆ ﺍﺭﺗﻔﺎﻉ‬
    ‫ﺍﻟﻜﺘﻞ ﻋﻦ ﺳﻄﺢ ﺍﻷﺭﺽ ﺑﺎﳌﻘﺪﺍﺭ ﺍﻟﺴﺎﺑﻖ‪).‬ﻓﻘﻂ ﳌﻌﺎﻳﻨﺔ ﺍﻟﻜﺘﻠﺔ ﻫﻨﺎ(‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬
    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    ‫ﳝﻜﻦ ﺇﻃﻔﺎﺀ ﺗﻔﻌﻴﻞ ﺍﻟﺸﺮﺍﺋﺢ ﺍﻷﺧﺮﻯ ﳌﺸﺎﻫﺪﺓ ﻣﻌﺎﻳﻨﺔ ﻟﻠﻜﺘﻞ ﺍﻟﻨﺎﲡﺔ‪.‬‬

    ‫ﻣﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‪:‬‬


    ‫‪www.cadmagazine.net‬‬

    ‫ﻣﻨﺘﺪﻯ ﺑﺮﻧﺎﻣﺞ ‪Arc GIS‬‬ ‫ﺧﺎﺹ ﲟﻮﻗﻊ ﳎﻠﺔ ﺍﻟﺘﺼﻤﻴﻢ ﺑﺎﳊﺎﺳﻮﺏ‬ ‫‪Ezzat73‬‬

    You might also like