Hand-held Pressure Measuring

Devices with External and

Integrated Pressure Sensors

measuring

monitoring

analysing

Measuring range from 0 to 400 bar abs.

Measuring accuracy starting with
0.1% F.S.
Large selection of pressure sensors
Automatic sensor recognition
Absolute pressure measurement,
Relative pressure measurement
Serial interface, minimum/maximum
memory, hold function, real-time clock,
logger function
Differential pressure measurement
Robust housing, IP 65, front

1 / 02-2008

KOBOLD companies worldwide:

ARGENTINA, AUSTRIA, BELGIUM, CANADA, CHILE, CHINA, CZECHIA,

FRANCE, GERMANY, GREAT BRITAIN, INDIA, INDONESIA, ITALY,
MALAYSIA, MEXICO, NETHERLANDS, POLAND, SINGAPORE, SLOVAKIA,
SPAIN, SWITZERLAND, THAILAND, USA, VENEZUELA, VIETNAM

KOBOLD Messring GmbH

Nordring 22-24
D-65719 Hofheim/Ts.
 +49 (0) 61 92 2 99 - 0
Fax +49 (0) 61 92 2 33 98
E-Mail: [email protected]
Internet: www.kobold.com

Model:
HND-P

Hand-held pressure measuring devices

model: HND-P...

Nearly all measuring tasks for the determination of pressure

can be performed with the HND-P series KOBOLD hand-held
pressure measuring devices. Various housing designs make
it possible to find the right housing with the appropriate
characteristic for every application. In addition to the large
selection of external pressure sensors up to max. 400 bar
absolute, measuring devices with integrated sensors in the
millibar range are also available.

In the following table, all KOBOLD hand-held pressure measuring devices are listed with their respective equipment
characteristics to ensure fast classification. Further technical
data and additional information regarding the individual
housings can be found in the subsequent pages.

Characteristics of the hand-held measuring devices of the HND-P... series

Pressure
measurement

HNDP105

HNDP210/215

HNDP121/ 231

HNDP123 / 233

HNDP126 / 236

HNDP127

HNDP129 / 239

external

internal

Measuring range

depending upon the sensor

-1,00...
25,00 mbar

-10,0...
350,0 mbar

-100...
2000 mbar

-10,0...
420,0 mbar

0...
1300 mbar

Accuracy

0,1% F.S.
1 Digit*

0,1% F.S.
1 Digit*

Start. with
0,3% F.S.

Start. with
0,2% F.S.

Start. with
0,2% F.S.

Start. with
0,1% F.S.

Start. with
0,2% F.S.

Display (LCD)

2 x 4-digit

2 x 4-digit

2 x 4-digit

2 x 4-digit

2 x 4-digit

2 x 4-digit

2 x 4-digit

0 -1 Volt

Interface

Output

Connection

1x hose connection nipples

2 hose connection nipples made of metal

6 four-pin Mini-DIN plug

Minimum/maximum value memory

Minimum/maximum alarm

only
HND-P231

only
HND-P233

only
HND-P236

only
HND-P239

Alarm

only
HND-P231

only
HND-P233

only
HND-P236

only
HND-P239

Auto-off funktion

Hold function

Zero point offset entry

Differential measurement

only
HND-P215

Logger function

only
HND-P231

only
HND-P233

only
HND-P236

only
HND-P239

Real-time clock

only
HND-P231

only
HND-P233

only
HND-P236

only
HND-P239

Battery

External

Power supply

www.kobold.com

No responsibility taken for errors;

subject to change without prior notice.

1 / 02-2008

*Measurement device precision, without consideration for the precision of the respective sensor

Hand-held pressure measuring devices for external pressure sensors

models: HND-P105 / 210 / 215

Connection for external sensor

2 connections with HND-P215

display of 2 measuring points
differential pressure measurement

Technical data (continued)

Power supply:
9 V-monobloc battery
(included in the scope of delivery)
external 10,5 -12 VDC via jack

Serial interface

Current consumption:

approx. 3 mA

Logger function with

HND-P210/215

Housing material:

made of impact-resistant ABS-K

Degree of protection:

IP 65, front

Relative pressure sensors

Dimensions:

142 x 71 x 26 mm (H x W x D)

Weigh:

approx. 150 g

Scope of functions
Minimum/maximum value memory
Description

Hold function: freezing of the current value

The KOBOLD hand-held pressure measuring devices HNDP105/210/215 are highly precise, compact pressure measuring devices that can be used universally. In conjunction with
the appropriate external pressure sensors, precise measurement results over the entire measuring range can be achieved. Various pressure sensors are available for a multitude of
measuring tasks and special applications. The respective
measurement task determines which combination is selected. Naturally, these first-rate KOBOLD-measuring units can
display more than just pressure. All devices in this series
allow for minimum/maximum value memory, hold function,
automatic self-shut-off, or zero point offset entry for all connected pressure sensors, for example. The HND-P210/215
types also have a logger function, a peak value memory, or a
minimum/maximum alarm. A special characteristic of the
type HNDP215 is the possibility of connecting two external
pressure sensors.
Areas of application
Chemical, pharmaceutical, food industry
Machine and apparatus construction

Measurement input: for pressure sensor HND-PS

Measuring range:

depending upon the pressure sensor

Accuracy:

0,1% F.S. 1 Digit

(at nominal temperature 25 C)
depending upon the sensor
-1999 ... +9999

Display:

2 x 4-digit LCD-displays

Tare function:
display-, minimum/maximum values are set to zero
Additional functions with type HND-P210 / 215:
Minimum/maximum alarm can be deactivated
Alarm (3 alarm settings)
Off:
Alarm function inactive
On:
Alarm notification via display,
internal horn and serial interface
No Sound: Alarm notification only via display and interface
Averaging
Peak value memory unfiltered pressure peaks 10 msec
Adjustable measuring cycle:
slow
4 measurements/sec
fast
100 measurements/sec (filtered)
peak-detect 100 measurements/sec
Real-time clock: current time with date and year

Technical data
(The data listed refers to the measuring unit without
consideration for the respective sensors)

Display range:

Zero point adjustment for connected sensor

Power saving mode for measuring cycle slow

Piping and container construction

Resolution:

Automatic-off function: 1...120 min (can be deactivated)

Logger functions:
Manual:
99 datasets
Cyclic:
9999 datasets (only HND-P210)
3600 datasets (only HND-P215)
Adjustable cycle time: 1 sec...1 h
2 pressure sensor connections (only HND-P215)
Order data
Order-no.

Housing design

HND-P 105

1 x pressure sensor input, standard

1 / 02-2008

Operating temperat.: -25 to +50 C

Storage temperat.:

-25 to +70 C

Storage hu midity:

0 to 95 % r. H. (non-condensing)

Probe connection:

6-pin shielded Mini-DIN plug,

autom. sensor recognition,
and measuring range adjustment

HND-P 210

1 x pressure sensor input with

additional functions (see techn. data)

Output:

serial interface
(via 3-pin jack, transformer on
RS232 or USB optional)

HND-P 215

2 x pressure sensor inputs with

additional functions (see techn. data)

No responsibility taken for errors;

subject to change without prior notice.

Suitable probe and accessories see pages 4 and 8

www.kobold.com

Hand-held pressure measuring devices for external pressure sensors

Pressure sensors for HND-P 105, HND-P 210 und HND-P 215
Measurement principle: piezo-resistive
Cable connection: 1 m PVC, screened
Measuring range

Accuracy

Resolution

Overload

-1,999...2,500 mbar

0,2 % EW / 1,0 % EW*

0,001 mbar

max. 200 mbar

-19,99...25 mbar

0,2 % EW / 0,5 % EW*

0,01 mbar

max. 300 mbar

-199,9...350,0 mbar

0,1 mbar

max. 1 bar

-1000...2000 mbar

1 mbar

max. 4 bar

-1...10 bar

10 mbar

max. 10,34 bar

1 mbar

max. 4 bar abs.

Workingtemperature

Connection

Order-no.

HND-PS01**
Nylon spigot for
hose 6 x 1 mm

HND-PS02**
HND-PS03**
HND-PS04**

0...+50C

HND-PS05**

0...1300 mbar abs.

HND-PS06**

0...2000 mbar abs.

HND-PS07**

0...7,00 bar abs.

10 mbar

max. 10 bar abs.

0...350,0 mbar rel.

0,1 mbar

max. 1,4 bar

HND-PS08**
HND-PS09
G 14,

0...1000 mbar abs.

External threads
stainless steel

max. 4 bar abs.

HND-PS10

0,2 % EW / 0,4 % EW*

0...3500 mbar abs.

max. 14 bar abs.

HND-PS11

1 mbar
0...3500 mbar rel.

max. 14 bar rel.

HND-PS12
0...+70C

0...7000 mbar abs.

0...35,00 bar abs.

10 mbar

0...70,00 bar abs.

max. 28 bar abs.

HND-PS13

max. 140 bar abs.

HND-PS14

max. 280 bar abs.

HND-PS15

0...160,0 bar abs.

HND-PS16
0,1 bar

0...250,0 bar abs.

max. 600 bar abs.

0...400,0 bar abs.

HND-PS17
HND-PS18

* in the range from 0 to +50 C

www.kobold.com

No responsibility taken for errors;

subject to change without prior notice.

1 / 02-2008

** Pressure sensors HND-PS01 up to HND-PS08

are only suitable for air and non corrosive / non ionising
gases and liquids, not for water.

Hand-held pressure measuring devices with integrated pressure sensors

models: HND-P121/231...P127

Integrated pressure sensor

Type-specific technical data

2 hose connections

HND-P121/-P231

Differential pressure
measurement

Measuring range:

-1,00 to 25,00 mbar

(-25,00...+25,00 mbar)

Serial interface

Accuracy:

Extensive additional functions

0,3 % F.S.
(Hysteresis and linearity)

Relative pressure sensors

0,4 % F.S.
(in the range o f 0-50 C)

Description
The highly precise KOBOLD hand-held pressure measuring
devices HNDP121/P231...HND-P127 are measuring devices with integrated pressure sensors. They have two pressure measurement inputs on the top of the housing, which are
connected to the measuring points by means of stable metal
connections and plastic hoses that are available as accessories. Numerous measuring ranges in the overpressure and
underpressure range are available for various measurement
tasks, such as differential pressure measurement. In addition
to pressure display, these first-rate, compact, universally
applicable measuring units offer additional functions such as
minimum/maximum value memory, a hold function, tare function, automatic self-shut-off, or zero point offset. The devices
with an expanded spectrum of functions also have a logger
function, a peak value memory, minimum/maximum alarm,
an adjustable measuring cycle, and averaging.
Areas of application
Chemical, pharmaceutical, food industry

Resolution:

0,01 mbar

Units:

mbar, bar, Pa, kPa, mmHg, PSI, m

(switchable)

Overload:

max. 10000 Pa (max. 100 mbar)

HND-P123/-P233
Measuring range:

-10,0 to 350,0 mbar

(-350,0...+350,0 mbar)

Accuracy:

0,2 % F.S.
(Hysteresis and l inearity)
0,4 % F.S.
(in the range of 0-50 C)

R esolution:

0,1 mbar

Units:

mbar, bar, kPa, MPa, PSI, mmHg, m

(switchable)

Overload:

max. 1 bar

HND-P126/-P236
Measuring range:

-100 to 2000 mbar

(-2000...+2000 mbar)

Accuracy:

0,2 % F.S.
(Hysteresis and l inearity)

Machine and apparatus construction

Piping and container construction

0,4 % F.S.
(in the range of 0-50 C)

Regarding: Type-specific technical data

The measuring ranges given in brackets correspond to
the maximum possible measuring ranges when using
Minus and Plus connection spigots. The spigots may
not be stressed beyond the beginning or final value
listed in the standard measuring range. This is true both
for the overpressure and the underpressure range. The
measuring range reverses depending upon the use of
the connection spigots.

R esolution:

1 mbar

Units:

mbar, bar, kPa, MPa, PSI, mmHg, m

(switchable)

Overload:

max. 4 bar

HND-P127
Measuring range:

-10,0 to 420,0 mbar

(-420,0...+420,0 mbar) or

Accuracy:

0,1% F.S.
(Hysteresis and linearity)

1 / 02-2008

Example HND-P121/-P231: Maximum measuring range

minus spigot -25,00...+1,00 mbar; Maximum measuring
range plus spigot -1,00...+25,00 mbar

No responsibility taken for errors;

subject to change without prior notice.

0,4 % F.S.
(in the range of 0-50 C)
Resolution:

0,1 mbar

Units:

mbar, bar, kPa, MPa, PSI, mmHg, m

(switchable)

Overload:

max. 1 bar

www.kobold.com

Hand-held pressure measuring devices with integrated pressure sensors

models: HND-P121/231...P127

General technical data

Measurement input: by means of two metal hose stems
Sensor:

piezo-resistive relative pressure

sensor, for air or non-corrosive and
non-ionising gases and liquids,
not for water!

Additional functions with

HND-P231, HND-P233, HND-P236:
Minimum/maximum alarm can be deactivated
Alarm (3 alarm settings)
Off:

Alarm function inactive

On:

Alarm notification via display, internal horn

and serial interface

No Sound:

Alarm notification only via display

and interface

Display:

2 x 4- digit LC-displays

Operating temp.:

0 to +50 C

Storage temp.:

-20 to +70 C

Storage humidity:

0 to 95 % r. H. (non-condensing)

Averaging

Output:

serial interface
(via 3-pin jack, transformer on RS232
or USB optional)

Peak value memory unfiltered pressure peaks 10 msec

Power supply:

9 V-monobloc battery
(included in the scope of delivery),
extern 10,5 -12 VDC via jack

Adjustable measuring cycle:

slow

4 measurements/sec

fast

100 measurements/ sec (filtered)

peak-detect 100 measurements/sec

Current consumpt.:

< 1 mA (HND-P121...),
max. 3 mA (HND-P231...)

Power saving mode for measuring cycle slow

Material:

housing made of impact-resistant

ABS plastic

Logger functions:

Degree of protect.:

IP65, front

Dimensions:

142 x 71 x 26 mm (H x W x D)

Weight:

approx. 160 g

Real-time clock: current time

Manual:

99 datasets

Cyclic:

9999 datasets
Adjustable cycle time: 1 sec...1 h

Order data

Scope of functions:
Minimum/maximum value memory

Order-no.

Housing design

HND-P 121

2 measuring inputs, standard

HND-P 231

2 measuring inputs with additional

functions (see techn. data)

HND-P 123

2 measuring inputs, standard

HND-P 233

2 measuring inputs with additional

functions (see techn. data)

HND-P 126

2 measuring inputs, standard

HND-P 236

2 measuring inputs with additional

functions (see techn. data)

HND-P 127

2 measuring inputs, greater sensor

accuracy, standard

Hold function: freezing of the current value

Automatic-off function: 1...120 min (can be deactivated)
Zero point adjustment via keyboard possible
Tare function:
display, minimum/maximum values are set to zero
Battery change notification

www.kobold.com

No responsibility taken for errors;

subject to change without prior notice.

1 / 02-2008

Connection material, see accessories on page 8

Hand-held pressure measuring devices with integrated pressure sensors

models: HND-P129 / 239

Integrated pressure sensor

Technical data (continued)

1 hose connection

Output:

Serial interface

Absolute pressure sensor

Logger function with

HND-P239

Power supply:

Current consumption:
Material:

Description
The KOBOLD hand-held pressure measuring devices HNDP129 and HNDP239 have an integrated pressure sensor for
absolute pressure measurement. The measuring device is
connected to the measuring point by means of a stable,
metal connection on the top of the housing and an optional
plastic hose. This device design offers the possibility of also
displaying the barometric air pressure in relation to sea level
zero. In this case, air pressure is corrected by entering the
height above zero in meters. Naturally, these devices also
have the minimum/maximum value memory, a hold function,
a tare function, automatic self-shut-off function, and zero
point adjustment. The KOBOLD HND-P239 devices also
offer additional functions like the logger function, peak value
memory, minimum/maximum alarm, an adjustable measuring
cycle, and averaging.
Areas of application
Chemical, pharmaceutical, food industry
Machine and apparatus construction
Piping and container construction

1 / 02-2008

Technical data
Measuring range:

0 to 1300 mbar abs.

Accuracy:

0,2 % F.S.
(Hysteresis and linearity)
0,4 % F.S.
(in the range of 0-50 C)

Resolution:

1 mbar

Units:

mbar, bar, kPa, MPa, mmHg, PSI, m

(switchable)

Overload:

max. 4 bar absolute

Measuring input:

by means of a metal-hose stem

Sensor:

piezo-resistive absolute pressure

sensor, for air or for non-corrosive
and non-ionizing gases and liquids,
not for water!

Display:

2 x 4- digit LC-displays

Operating temp.:

0 to +50 C

Degree of protection:
Dimensions:
Weight:
Scope of functions:

Minimum/maximum value memory

Hold function: freezing of the current value
Automatic-off function: 1...120 min (can be deactivated)
Zero point adjustment via keyboard possible
Tare function:
Display, minimum/maximum values are set to zero
Battery change notification
Additional functions with HND-P239:
Minimum/maximum alarm can be deactivated
Alarm (3 alarm settings)
Off:
Alarm function inactive
On:
Alarm notification via display, internal horn
and serial interface
No Sound:
Alarm notification only via display
and interface
Averaging
Peak value memory unfiltered pressure peaks 10 msec
Einstellbarer Messzyklus:
slow
4 measurements /sec
fast
100 measurements /sec (filtered)
peak-detect 100 measurements /sec
Power saving mode in the measuring cycle slow
Real-time clock: current time
Logger functions:
Manual:
99 datasets
Cyclic:
9999 datasets
Adjustable cycle time: 1sec...1h
Order data

Storage temperatur: -20 to +70 C

Storage humidity:

0 to 95 % r. H. (non-condensing)

No responsibility taken for errors;

subject to change without prior notice.

serial interface
(via 3-pin jack, transformer on
RS232 or USB optional)
9 V-monobloc battery
(included in the scope of delivery),
external 10,5 -12 VDC via jack
< 1 mA (HND-P129),
max. 3 mA (HND-P239)
housing made of impact-resistant
ABS plastic
IP 65, front
142 x 71 x 26 mm (H x W x D)
approx. 160 g

Order-no.

Housing design

HND-P 129

1x pressure sensor input, standard

HND-P 239

1x pressure sensor input with

additional functions (see techn. data)

Connection material, see accessories on page 8

www.kobold.com

Accessories for hand-held measuring devices

Accessories for hand-held pressure measuring devices HND-P and sensor HND-PS
Order-no.

Description

HND-Z002

Plug power supply unit (220 / 240 V, 50 / 60 Hz), 10,5 V / 10 mA

HND-Z011

Equipment protective housing bag, nappa leather, with 1 cut-out for round sensor connection

HND-Z012

Equipment protective housing bag, nappa leather, with 2 cut-outs for round sensor connection

HND-Z021*

Case with recess (275 x 229 x 83 mm)

HND-Z022*

Universal case with egg crate foam (275 x 229 x 83 mm)

HND-Z023*

Large case with recess (394 x 294 x 106 mm)

HND-Z031

Interface converter on RS232, galvanically isolated

HND-Z032

Interface converter on USB, galvanically isolated

HND-Z033

Adapter RS232 converter on USB- interface

HND-Z034

Windows software for setting and data read- and print-out of instruments of the HND- series
with logger function

BUS-SW9M

Software for recording measurement data on a computer, for instruments of the HND-series without
logger function

HND-Z081

Double nozzle for hose 64 on hose 64

HND-Z082

Hose clamp for hose 64

HND-Z083

Adapter made of brass for G 14 internal threads on hose 64

HND-Z084

PVC-hose (5 bar), 6 mm external / 4 mm internal

HND-Z085

PE-hose (10 bar), 6 mm external / 4 mm internal

HND-Z086

PU-hose (9 bar), 6 mm external / 4 mm internal

HND-Z087

PA-hose (25 bar), 6 mm external / 4 mm internal

* Observe instrument dimensions

1 / 02-2008

Additional accessories on request

No responsibility taken for errors;

subject to change without prior notice.

www.kobold.com