The WRO 300 is a compact reverse osmosis water purification unit designed specifically for dialysis. It provides high quality water through reverse osmosis which removes over 95% of dissolved salts and over 99% of particles, bacteria, and pyrogens. The integrated chemical disinfection ensures the hygienic chain from the unit to the dialysis machine remains unbroken. The automated procedures minimize patient and caregiver involvement during dialysis treatment.
The WRO 300 is a compact reverse osmosis water purification unit designed specifically for dialysis. It provides high quality water through reverse osmosis which removes over 95% of dissolved salts and over 99% of particles, bacteria, and pyrogens. The integrated chemical disinfection ensures the hygienic chain from the unit to the dialysis machine remains unbroken. The automated procedures minimize patient and caregiver involvement during dialysis treatment.
Original Description:
Datasheet of Gambro Osmosys
Original Title
Datasheet Osmose Gambro HCEN2016_WRO300_datasheet en ORI
The WRO 300 is a compact reverse osmosis water purification unit designed specifically for dialysis. It provides high quality water through reverse osmosis which removes over 95% of dissolved salts and over 99% of particles, bacteria, and pyrogens. The integrated chemical disinfection ensures the hygienic chain from the unit to the dialysis machine remains unbroken. The automated procedures minimize patient and caregiver involvement during dialysis treatment.
The WRO 300 is a compact reverse osmosis water purification unit designed specifically for dialysis. It provides high quality water through reverse osmosis which removes over 95% of dissolved salts and over 99% of particles, bacteria, and pyrogens. The integrated chemical disinfection ensures the hygienic chain from the unit to the dialysis machine remains unbroken. The automated procedures minimize patient and caregiver involvement during dialysis treatment.
and caregiver involvement Dialysis machine can start and stop WRO 300 Automatically shut-off at completion of disinfection process.
WRO 300 Technical Data
Water for Dialysis The quality of the water used in the preparation of dialysis fluid is very important. Even water considered as acceptable according to existing tap water regulations may have chronic as well as acute effects on the dialysis patient. The Gambro single patient reverse osmosis monitor WRO 300 is specially designed to provide the high quality water needed for dialysis.
which complies with existing recommendations for water for dialysis.
WRO 300 is a reverse osmosis unit designed specifically for dialysis. It combines simplicity, reliability and ease of use and is based on the long time experience of water treatment equipment within Gambro.
Integrated chemical disinfection
Reverse osmosis Reverse osmosis is today the preferred method for the purification of water for dialysis. This method removes more than 95% of dissolved salts and more than 99% of all particles, bacteria and pyrogens in the water. Most tap waters can therefore be purified to a standard
When WRO 300 is fitted to a Gambro dialysis machine, one of the
disinfection programs will allow an integrated chemical disinfection of the reverse osmosis unit, the connection line to the dialysis machine and the dialysis machine itself. This end-to-end action will ensure that the hygienic chain remains unbroken.
Product water
Temperature measurement
Output:
Minimum 1100 ml/min at +10C.
Operating range:
Quality:
Depends on inlet water quality. If potable water
is used, and WRO 300 is maintained according to the manual, the following minimum rejection rates will be obtained:
Reverse osmosis membrane
Material:
Modified polyamide, thin film composite
Total dissolved salts:
> 95%
Configuration:
Spiral wound
Bacteria and pyrogens:
> 99%
pH-tolerance:
2 to 11
1-100C
Feed water supply
Disinfection & Cleaning
Input:
2,5 l/min required.
Pressure:
120 to 800 kPa (1.2 to 8 bar).
Chemical disinfection:
Automatic dilution of disinfectant.
Rinse memory forcing the rinse program to start after chemical disinfection.
Cleaning:
Customized programs for different needs.
Temperature:
5 to 30C.
Quality:
Potable water should be used. Softener followed by
carbon/particle filter ensures optimum performance. Softener may be omitted if acid cleaning is performed on a regular basis. To insure maximum membrane life expectancy, the following limits should not be exceeded:
Power supply Mains voltage:
100, 110 or 230V +/-10%, 50 or 60 Hz
Power:
230 V:
max 500 W
Iron:
< 0.1 mg/l
100 V:
max 500 W
Manganese:
< 0.1 mg/l
110 V:
max 500 W
Turbidity:
< 1 JTU
Total dissolved salts (TDS):
< 1500 mg/l
Fouling index (S.D.I):
<5
Chlorine:
< 0.1 mg/l
Mains socket:
Hospital grade earthed, type EC83A5-15
Max. 10 m
Ambient 2,5 l/min temperature:
Connections
10 to 40 C
Dimensions
Supply and drain lines
Designed for flexible, reinforced tubing, 8 mm x 3 mm.
Depth:
Max:
500 mm
Footprint:
380 mm
Max.
205 mm
Footprint:
185 mm
Product water loop
Designed for flexible, reinforced tubing, 6 mm x 3 mm.
Width:
User interface displays:
Height:
560 mm
Product water conductivity: Feed water conductivity: Rejection rate: Time:
Weight:
28 kg
Temperature compensated product water
conductivity, operating range 0 to 500 S/cm Temperature compensated feed water conductivity, operating range 0 to 2000 S/cm Rejection rate, operating range 80 to 100%. Date and time Time since last disinfection, cleaning, etc. Total run time
Specifications subject to change without prior notice. For further information and operating instructions, please refer to applicable operators manual.
HCEN2016 2004.06. Rev 2. Gambro Lundia AB. 2004 June. Printed by Elanders Berlings.
