Lesson Plan Dme
Uploaded by
dsathiyaLesson Plan Dme
Uploaded by
dsathiyaSt. Peters College of Engineering and Technology, Avadi, Chennai.
Format No: LP-01
Issue No: 01
Issue Date: 10-0710
Department of Mechanical Engineering
Lesson Plan
Academic year :
Course Code
:
Total No of hours:
Course
:
2015-2016
ME 6503
60hrs
DESIGN OF MACHINE ELEMENTS
Topic
S. No
Faculty
D.Sathiyamoorthy
Name45
Theory hrs
Tutorial hrs
V
Semester- No. of
Text
Page No.
Hrs
books
UNIT I - STEADY STRESSES AND VARIABLE STRESSES IN MACHINE
MEMBERS
PERIODS : 10 HRS
1.
Introduction to the design process
01
T1
1.2-1.5
2.
Factor influencing machine design, selection of
materials based on mechanical properties
01
T1
1.5-1.7
3.
Preferred numbers, fits and tolerances
01
T1
1.7-1.10
4.
Direct, Bending and torsional stress equations
01
T1
1.10-1.16
5.
Impact and shock loading
01
T1
1.16-1.30
6.
Calculation of principle stresses for various load
combinations, eccentric loading
01
T1
1.30-1.44
7.
Design of curved beams Crane hook and C frame -
01
T1
1.44-1.48
8.
Factor of safety and Theories of failure
01
T1
1.49-1.76
9.
Stress concentration
Design for variable loading Soderberg, Goodman and
Gerber relations
01
T1
1.76-1.80
01
T1
1.80-1.93
10.
UNIT II- DESIGN OF SHAFTS AND COUPLINGS PERIODS : 8 HRS
1.
Design of solid and hollow shafts based on strength
02
T1
2.1-2.10
2.
Design of solid and hollow shafts based on rigidity
02
T1
2.4-2.24
3.
Design of solid and hollow shafts based on critical speed
01
T1
2.6-2.61
4.
Design of keys, key ways and splines
01
T1
2.61-2.82
5.
Design of rigid and flexible couplings
02
T1
2.1252.149
UNIT III- DESIGN OF TEMPORARY AND PERMANENT JOINTS PERIODS : 9 HRS
1.
Threaded fasteners
01
T1
3.2
2.
Design of bolted joints including eccentric loading
01
T1
3.2-3.48
3.
Knuckle joints
01
T1
4.
Cotter joints
01
T1
3.1463.149
3.1543.164
5.
Design of welded joints
02
T1
3.48-3.76
6.
Riveted joints for structures
02
T1
3.100-3.116
7.
Theory of bonded joints.
01
T1
3.1673.174
UNIT IV- DESIGN OF ENERGY STORING ELEMENTS
PERIODS : 9 HRS
1.
Design of various types of springs
03
T1
4.1
2.
Optimization of helical springs
01
T1
4.2-4.72
3.
Rubber springs
01
T1
4.73-4.95
4.
Design of flywheels considering stresses in rims and arms,
for engines and punching machines
02
T1
4.114-4.115
5.
Design of Connecting Rods and crank shafts.
02
T1
5.96-5.103
UNIT V -DESIGN OF BEARINGS AND MISCELLANEOUS ELEMENTS PERIODS :
HRS
1. Sliding contact and rolling contact bearings
03
T1
5.1-5.41
2.
Design of hydrodynamic journal bearings
02
T1
5.44-5.47
3.
Sommerfield Number, Raimondi & Boyd graphs,
02
T1
5.55-5.64
4.
Selection of Rolling Contact bearings
02
T1
5.14
TEXT BOOKS:
1. RS Khurmi and JK Gupta , Machine Design 2005 edition , S.Chand Publications
2005
REFERENCES:
1. R.B Patil ,Design of machine Elements Macmillan publishers, Maharashtra,2011
2. Bhandari V.B, Design of Machine Elements, Second Edition, Tata McGraw-Hill
Prepared by,
D.Sathiyamoorthy
AP / Mech
Approved by
Dr. K.PURUSHOTHAMAN
HOD/ MECH
