Scribd
Upload
241 views2 pages

Technical Specification of Midas Gen PDF

This document provides technical specifications for midas Gen Packages. It lists various analysis types including static, dynamic, nonlinear time history, pushover, and thermal stress analyses. It also lists design standards for steel, concrete, and composite structures. The finite element library includes beams, trusses, plates, solids, and cables. Advanced packages provide additional analysis types such as geometric nonlinearity, material nonlinearity, and construction stage analysis.

Uploaded by

bryamdv23
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
241 views2 pages

Technical Specification of Midas Gen PDF

This document provides technical specifications for midas Gen Packages. It lists various analysis types including static, dynamic, nonlinear time history, pushover, and thermal stress analyses. It also lists design standards for steel, concrete, and composite structures. The finite element library includes beams, trusses, plates, solids, and cables. Advanced packages provide additional analysis types such as geometric nonlinearity, material nonlinearity, and construction stage analysis.

Uploaded by

bryamdv23
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

midas Gen Packages, Technical Specifications

Nodes (Elements)
Unlimited Nodes and Elements

Analysis Types
Static Analysis
Dynamic Analysis
- Eigen ( Lanczos) and Ritz vector Analyses
- Response Spectrum Analysis
- Time History Analysis

Plus

Advanced

Plus

Advanced

Full

- Inelastic Time History Analysis (Option)


Beam Element
Lumped hinge & Distributed hinge
Automatic calculation of yield strength
Axial load biaxial moment interaction
Fiber model Analysis
- Boundary Nonlinear Dynamic Analysis using Gap, Hook,
Damper, Isolator, Hysteretic System
- Pushover Analysis
Auto Plastic Hinge Definition
Auto PM Interaction curve for hinge formation
Obtain Performance point as per FEMA
Moving Load Analysis
Masonry Wall Analysis ( Linear / Nonlinear)
Detailed Section Analysis
- Section Property Calculator for irregular sections
Import section drawing from AutoCAD
Create composite section with more than 2 parts
Buckling Analysis
Heat of Hyration Analysis for mass concrete
(Option)
- Heat of Hydration Analysis for mass concrete

- Convection, Heat Source, Pipe cooling, etc.


Thermal Stress Analysis

Material Nonlinear Analysis (Option)


- Truss, Plate, Plane stress, Plane strain, Axisymmetric and
Solid

- Isotropic, kinematic and mixed hardening


Construction Stage Analysis (Time-dependent)
- Creep, Shrinkage & Modulus of Elasticity
- Tension losses in tendons
- Column Shortening
- Construction Stage Wizard
-P Delta Analysis
-Geometric Nonlinear Analysis

- Tresca, von Mises, Mohr-Coulomb and Drucker-Prager

Higher Order Analysis

Full

Analysis Types (Continued)

Plus

Advanced

Full

Plus

Advanced

Full

- Large Displacement (Forward / Backward ) Analysis


(Cable structures)
Post-tension & Prestressing

Design (Steel, Concrete & SRC)


AISC(LRFD & ASD), CSA S16.1, BS 5950 & Eurocode 3
ACI318, CSA-A23.3, BS 8119 & Eurocode 2
Slab & Meshed Wall Design (Eurocode 2) (Option)
- Flexural design (Wood-Armer moment)
- Punching shear check
- Sericeability check (Stress, Crack width, Deflection)

Finite Element Library


General Beam
Tapered Beam
Truss
Compression Only
Gap
Hook
Mass / Spring / Damper
Plane Stress
Plane Strain
Plate (Thick / Thin, In-plane / Out of plane Thickness &
Orthotropic materials)
Stiffened Plate
Solid (Hexahedron, Pentahedron, Tetrahedron)
Rigid Link
Cable (Equivalent Truss Type)

Plus

Advanced

Full

Plus

Advanced

Full

Plus

Advanced

Full

Calbe (Elastic Catenary Type )

Report
Dynamic Report Generation

Others
GSD (General Section Design) (Option)

- Draw Arbitrary Cross-sections (RC, Steel, Composite)

- Capacity Curves ( P-M, M-M, 3D) & Capacity Check Ratio


(Eurocode)
- Moment-Curvature Curves for Different Axial Loads
- Stress Contours for Combined Loading
Automatic Mesh Generator for Plane Wall and Slabs
(Option)
- Planar mesh generation for 2D elements (plate, plane
stress, plane strain)
- Automesh planar area ( automatic consideration of
internal columns and walls)
- Mapped mesh generation using 4 nodes

You might also like