Series 980

1-800-285-1600 Quality Since 1935

Quality Value Service

Floating Flange
Rubber Expansion Joints

HOLZ SERIES 980

The HOLZ 980 line of expansion joints provides high quality, well engineered products suitable for most
applications, all at a reasonable cost. HOLZ 980 expansion joints are designed to allow for the
expansion, contraction, lateral and angular movement of a piping system. HOLZ 980 expansion joints
are especially suited for and used in the HVAC industry.
CONSTRUCTION
HOLZ 980 expansion joints are precision molded under high pressure to ensure joint integrity.
Quality materials and modern fabrication techniques deliver reliable performance.

REINFORCEMENT
The nylon tire cord reinforcement is bonded within the elastomer so that no reinforcement
material will be exposed to atmosphere or media.

COVER
The cover elastomer is either EPDM or Neoprene for excellent resistance to sunlight, ozone and
heat aging. The Neoprene cover is self-extinguishing for fire resistance.

TUBE
HOLZ 980 expansion joints are manufactured with a Neoprene tube elastomer as standard that
is oil resistant, or an EPDM tube elastomer for greater temperatures and is chemical resistant.
Contact HOLZ RUBBER for availability and pricing.

FLOATING FLANGES
HOLZ 980 expansion joints have floating metal flanges which allow for rotational misalignment
of the pipe. No cumbersome gaskets or separate retaining rings to lose or inventory.

ENGINEERING
All HOLZ 980 expansion joints are constructed with a spherical arch design for maximum
movement capability, minimum force to move and maximum pressure/full vacuum capability.

PRESSURE
The inherent design strength of the spherical arch allows for a high operating pressures and
burst pressures. The spherical arch design and the reinforcing material combine to provide for
full vacuum capability as noted by the Fluid Sealing Association.

MOVEMENTS
The wide spherical arch design of HOLZ 980 expansion joints, provides the maximum movement
capability in lateral deflection, angular misalignment, axial compression and extension. The high
pressure molding and tire cord reinforcing material of the HOLZ 980 expansion joint allows thin
wall construction for low forces to move. Compare our movement capability against competitive
products!

NOTE:
All HOLZ SERIES 980, STYLES 981 and 982, meet or exceed the Rubber Expansion Joint Division, Fluid Sealing
Association requirements for Standard Class 1, Series C.

AXIAL

compression

AXIAL
extension

LATERAL

shear or perpendicular to centerline

ANGULAR

bending of the centerline

HOLZ 980 expansion joints are ideal for use in the following applications:
SYSTEMS
INDUSTRIES
HVAC
Industrial Process
Marine
Construction
Power Plants
General Industrial

Page 2

Hot and Cold Water

Circulating Water
Refrigeration
Air Conditioning
Compressors
Pumps

REINFORCEMENT

METAL
FLANGE

HOLZ STYLE 981

COVER

TUBE

SINGLE ARCH
FLOATING FLANGE
EXPANSION JOINT

I.D.

FACE TO FACE

DESIGN CONDITIONS

MATERIALS OF CONSTRUCTION

14F - 275F

ELASTOMERS

GENERAL COMPATIBILITY

-10C to 135C

NEOPRENE

Moderate Chemicals and Acids, Ozone, Fats, Greases,

Many Oils and Solvents.

TEMP.
1 1/4" to 12" I.D.-225
PRESSURE
(PSI)

TUBE
ELASTOMERS
EPDM

14"I.D.-150
16" to 20" I.D.-125

REINFORCEMENT

26

COVER
ELASTOMERS

VACUUM
(In. of Hg.)

Pressure is based on 180F constant temperature. Contact

HOLZ RUBBER for pressures on higher operating temperatures.

METAL FLANGE

NOM. I.D.

Animal and Vegetable Oil, Ozone, Strong and

Oxidizing Chemicals.

NYLON TIRE CORD

NEOPRENE WITH NEOPRENE TUBE,

EPDM WITH EPDM TUBE.
125/150 lb. ANSI Standard of Drilling
(Refer to Page 6 for Specifications.)

GALVANIZED STEEL

STYLE 981
FACE TO FACE
MILLIMETERS
INCHES

INCHES

MILLIMETERS

1 1/4

32

1 1/2

40

MAXIMUM MOVEMENTS
COMP.

EXT.

LAT.

ANG.

150

1 3/16

3/8

1/2

15

150

1 3/16

3/8

1/2

15

50

150

1 3/16

3/8

1/2

15

2 1/2

65

150

1 3/16

3/8

1/2

15

80

150

1 3/16

3/8

1/2

15

100

150

1 3/16

1/2

1/2

15

125

150

1 3/16

1/2

1/2

15

150

150

1 3/16

1/2

1/2

15

200

150

1 3/16

1/2

1/2

15

10

250

203

1 3/16

3/4

3/4

15

12

300

203

1 3/16

3/4

3/4

15

14

350

203

1 3/16

3/4

3/4

15

16

400

203

1 3/16

3/4

3/4

15

18

450

203

1 3/16

3/4

3/4

15

20

500

203

1 3/16

3/4

3/4

15

NOTES:
1. Movements are non-concurrent. Contact HOLZ RUBBER for concurrent movement capabilities.
2. Media compatibility is general, refer to the HOLZ RUBBER Elastomer Specification Tables for specific resistance.
3. Movements are in inches unless otherwise stated.
4. For other sizes, elastomers/threading, contact HOLZ RUBBER.

Page 3

HOLZ STYLE 982

REINFORCEMENT

METAL
FLANGE

COVER

DOUBLE ARCH
FLOATING FLANGE
EXPANSION JOINT

TUBE
I.D.

FACE TO FACE

DESIGN CONDITIONS

MATERIALS OF CONSTRUCTION

14F to 275F

ELASTOMERS

GENERAL COMPATIBILITY

-10C to 135C

NEOPRENE

Moderate Chemicals and Acids, Ozone, Fats, Greases,

Many Oils and Solvents.

TEMP.
TUBE
ELASTOMERS

PRESSURE
(PSI)

EPDM

225
REINFORCEMENT

VACUUM

26

(In. of Hg.)

COVER
ELASTOMERS

Pressure is based on 180F constant temperature. Contact

HOLZ RUBBER for pressures on higher operating temperatures.

NOM. I.D.
IN.

MM

1 1/4

METAL FLANGE

NYLON TIRE CORD

NEOPRENE WITH NEOPRENE TUBE,

EPDM WITH EPDM TUBE.

GALVANIZED STEEL

125/150 lb. ANSI Standard of Drilling

(Refer to Page 6 for Specifications.)

STYLE 982
FACE TO FACE

MAXIMUM MOVEMENTS

IN.

MM

COMP.

EXT.

LAT.

ANG.

32

175

1 3/16

1 7/8

40

1 1/2

40

175

1 3/16

1 7/8

40

50

175

1 3/16

1 7/8

40

2 1/2

65

175

1 3/16

1 7/8

40

80

175

1 3/16

1 7/8

40

100

225

2 1/4

1 3/8

1 5/8

35

125

225

2 1/4

1 3/8

1 5/8

35

150

225

2 1/4

1 3/8

1 5/8

35

200

13

330

2 1/2

1 3/8

1 3/4

30

10

250

13

330

2 1/2

1 3/8

1 3/4

30

12

300

13

330

2 1/2

1 3/8

1 3/4

30

NOTES:
1. Movements are non-concurrent. Contact HOLZ RUBBER for
concurrent movement capabilities.
2. Media compatibility is general, refer to the HOLZ RUBBER Elastomer
Specification Tables for specific resistance.
3. Movements are in inches unless otherwise stated.
4. For other sizes, elastomers/drilling, contact HOLZ RUBBER.

Page 4

Animal and Vegetable Oil, Ozone, Strong and

Oxidizing Chemicals.

HOLZ 980
HYDROTEST

HOLZ STYLE 983

DOUBLE ARCH
THREADED UNION
EXPANSION JOINT
UNION
CONNECTOR

COVER

REINFORCEMENT

I.D.

TUBE

LENGTH

DESIGN CONDITIONS

MATERIALS OF CONSTRUCTION

14F to 275F

ELASTOMERS

GENERAL COMPATIBILITY

-10C to 135C

NEOPRENE

Moderate Chemicals and Acids, Ozone, Fats, Greases,

Many Oils and Solvents.

TEMP.
TUBE
ELASTOMERS

PRESSURE
(PSI)

EPDM

150
REINFORCEMENT

VACUUM

26

(In. of Hg.)

Pressure is based on 180F constant temperature. Contact

HOLZ RUBBER for pressures on higher operating temperatures.

Animal and Vegetable Oil, Ozone, Strong and

Oxidizing Chemicals.

NYLON TIRE CORD

COVER
ELASTOMERS

NEOPRENE WITH NEOPRENE TUBE, EPDM WITH EPDM TUBE.

UNION
CONNECTOR

FEMALE NPT THREADED (IPT) TO ANSI B-2.1 GALVANIZED STEEL

NOM. I.D.

STYLE 983
FACE TO FACE
MILLIMETERS
INCHES

INCHES

MILLIMETERS

3/4

20

25

1 1/4

MAXIMUM MOVEMENTS
COMP.

EXT.

LAT.

ANG.

203

7/8

1/4

7/8

35

203

7/8

1/4

7/8

25

32

203

7/8

1/4

7/8

25

1 1/2

40

203

7/8

1/4

7/8

20

50

203

7/8

1/4

7/8

15

2 1/2

65

203

7/8

1/4

7/8

15

80

203

7/8

1/4

7/8

15

NOTES:
1. Movements are non-concurrent. Contact HOLZ RUBBER for concurrent movement capabilities.
2. Media compatibility is general, refer to the HOLZ RUBBER Elastomer Specification Tables for specific resistance.
3. Movements are in inches unless otherwise stated.
4. For other sizes, elastomers, contact HOLZ RUBBER.

Page 5

HOLZ SERIES 980

DIMENSIONS

WEIGHTS

(INCHES)

STYLES 981 and 982

SEE NOTES

NOM I.D.

JOINT AND FLANGE OR

UNION (POUNDS)
STYLES
981
982

NOM I.D.

FLANGE
O.D.

FLANGE
THICKNESS

BOLT
CIRCLE

1 1/4

4 5/8

5/8

3 1/2

5/8

3/4

1.5

1 1/2

5/8

3 7/8

5/8

2.0

5/8

4 3/4

3/4

1 1/4

5.0

7.4

3.0

1 1/2

6.1

8.2

3.8

HOLE
NUMBER OF
DIAMETER
HOLES

2 1/2

11/16

5 1/2

3/4

7 1/2

11/16

3/4

11/16

7 1/2

3/4

10

13/16

8 1/2

7/8

11

7/8

9 1/2

13 1/2

7/8

11 3/4

10

16

15/16

14 1/4

983

8.9

9.0

5.4

2 1/2

12.3

13.3

7.8

14.0

14.3

11.3

18.3

20.3

7/8

22.8

24.5

7/8

26.8

29.5

12

40.6

43.8

10

56.6

64.1

12

83.0

95.0

14

115.0

12

19

15/16

17

12

14

21

1 1/32

18 3/4

12

1 1/8

16

23 1/2

1 3/32

21 1/4

16

1 1/8

16

165.0

18

25

1 3/16

22 3/4

16

1 1/4

18

168.0

20

27 1/2

1 3/16

25

20

1 1/4

20

170.0

NOTES:
1. Drilling meets 125/150 lb. standards of ANSI B16.1, B16.24, B16.5; AWWA C207 Class D & E.
2. Other drilling available. Contact HOLZ.

CONTROL RODS NUMBER OF UNITS REQUIRED FOR STYLES 981 and 982 ONLY
MAX. DESIGN OR TEST PRESSURE OF SYSTEM - PSIG

ROD
DIAMETER
(INCHES)

TWO UNITS

WEIGHT

FOUR UNITS

LBS./UNIT

1 1/4

7 3/4

5/8

830

6.5

1 1/2

8 1/8

5/8

510

6.5

9 3/4

5/8

661

6.5

2 1/2

10 3/4

5/8

529

7.5

11 1/4

5/8

441

8.0

12 11/16

5/8

311

467

622

8.0

13 11/16

5/8

235

353

470

8.0

14 11/16

5/8

186

278

371

10.0

17 7/16

163

244

326

13.0

10

20 1/2

163

244

325

16.0

12

23 11/16

160

240

320

16.0

14

25 13/16

112

167

223

20.0

16

29

1 1/4

113

170

227

20.0

18

30 1/2

1 1/4

94

141

187

21.0

20

33

1 1/4

79

118

158

21.0

NOTES:
1. Calculations are based on 65% of yield of the rod.
2. Weights are based on the standard length of the Series 981.
3. FSA Recommended minimum number of rods for indicated pipe size.

Page 6

CONTROL
ROD PLATE

RETAINING FLANGE

NOMINAL PIPE SIZE

JOINT I.D.

PLATE O.D.
(INCHES)

CONTROL ROD PLATE MAXIMUM O.D.

NOM I.D.

FLANGE
THICKNESS
OPTIONAL
COMPRESSION SLEEVE

BOLT
CIRCLE

EQUALLY
SPACED
BOLT HOLES
BOLT
HOLES
ER
DIAMET

Other HOLZ Expansion Joint Products

TRADITIONAL SPOOL TYPE
HOLZ RUBBER CO. has a complete
line of Arch and U-Type connectors
to meet your design requirements.
Engineered for vacuum, high
pressure, low pressure, vibration
elimination or unusual medias, you
can select the expansion joint best
suited for your application. HOLZ
RUBBER builds expansion joints to
meet U.S. Navy, Coast Guard and
ABS Specifications. Write/Call for
Brochure 15.12b/HOL for more
information.

U-TYPE

ARCH TYPE

REDUCERS OFFSETS

ECCENTRIC

CONCENTRIC

Eccentric or Concentric HOLZ

RUBBER CO. maintains a full variety
of materials to manufacture reducing
expansion joints to connect different
diameter pipe. All drilling will
straddle centerline unless otherwise
specified. HOLZ RUBBER CO. can
recommend the proper face to face
dimension to ensure proper flexure,
flow and construction. For
misaligned piping, HOLZ RUBBER
can engineer an expansion joint to
meet your requirements.

HOLZ SF-1000
EXPANSION JOINTS
The HOLZ SF-1000 expansion joint
line offers full face rubber flanges in
both the standard arch
configurations. Precision molded in
sizes to 12" ID. SF-1000 expansion
joints are engineered to perform.

STYLE SF-1000
FILLED ARCH

STYLE SF-1000

Send for our SF-1000 brochure for

complete information.

NON-METALLIC DUCTING
EXPANSION JOINTS
HOLZ RUBBER CO. manufactures a
full range of non-metallic expansion
joints for ducting systems. The 900
Series is designed for operating
temperatures to 400F in a variety of
elastomers. Also available is the
501HT Series designed for operating
temperatures to 2000F.

942

945

952

501HT

The HOLZ RUBBER CO. Flue Duct

Brochures provide you with design
information.

Page 7

HOLZ 980 (REV. 4/03)

Rubber
Expansion
Joints

SERIES 980

INHERENT ADVANTAGES OF
HOLZ 980 RUBBER
EXPANSION JOINTS

HOLZ 980 ADVANTAGES OVER

OTHER RUBBER
EXPANSION JOINTS

High Movement-to-Length Ratio

Higher Pressures

Low Deflection Forces

Greater Movement

Eliminates Electrolysis

Lower Spring Rates

Dampens Vibration

Oil Resistant Tube Standard

Corrosion Resistant

Immediate Availability

Sound Absorption

Floating Flanges

No Gaskets Required

Competitive Pricing

Distributed by:

1-800-285-1600 Quality Since 1935

1129 South Sacramento Street Call Box 241002

Lodi, CA 95240 USA
Local/Intl. Tel. 209-368-7171 Fax 209-368-3246
TOLL FREE (U.S. & Canada) 1-800-285-1600
TOLL FREE FAX (U.S. & Canada) 1-800-756-9998
http://www.holzrubber.com
E-mail: [email protected]
Manufacturers of Engineered Expansion Joints