Scribd
Upload
1K views7 pages

Tutorial - Routing Pipes and Tubes in Solidworks

This Solidworks tutorial provides instructions for routing pipes and tubes by connecting them to flanges in 3 steps: 1. Add the Solidworks Routing add-in and select a flange design library part to begin routing. 2. Draw pipe routes by sliding the line according to dimensions and manually connecting it to faces on added flange parts. 3. The completed pipe route is formed between the connected flange parts.

Uploaded by

choks007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views7 pages

Tutorial - Routing Pipes and Tubes in Solidworks

This Solidworks tutorial provides instructions for routing pipes and tubes by connecting them to flanges in 3 steps: 1. Add the Solidworks Routing add-in and select a flange design library part to begin routing. 2. Draw pipe routes by sliding the line according to dimensions and manually connecting it to faces on added flange parts. 3. The completed pipe route is formed between the connected flange parts.

Uploaded by

choks007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

TUTORIAL: Routing - Pipes and Tubes in Solidworks

SOLIDWORKS tubes solidworks pipes routing tutorial


By Victor Bonavarte 6779 on 12 Dec 08:51 5 answers 11701 views 1 comment

Simple tutorial in making the pipe and connect it to the flange

Added images

Question unclear or needs more details before answering? Comment (1)

5 answers

Victor Bonavarte 6779 over 1 year ago

o
TUTORIAL: Routing - Pipes and Tubes in Solidworks

2. Step 1
I will make it in assembly

3. Step 2
The first thing you should do.
select Tools - Add Ins - and select solidworks Routing

4. Step 3
and select a design library - Routing - Piping - flange - choose one, here I use the slip on weld flange.

5. Step 4
and select the configuration you want. here I am using the first

6. Step 5
make your settings. then ok.

7. Step 6
and will appear as in the picture, you can slide the line according your dimensions ..

8. Step 7
after that the result will be like this, and forming pipe

9. Step 8
then I added a flange back

10. Step 9
then I added a back flange valves in part.

11. Step 10
the same as that to step 6, and then click on flange face - right click and select add route.

12. Step 11
and will display the image like this, then I will make the line manually, because it does not use the "auto route"

13. Step 12
The line that I created manually. and it can do to suit your needs ..

14. Step 13
and after the exit, the result is like this.
I hope this tutorial is useful for you to learn ..
thank you.

You might also like