TA25

Articulated Truck
MAX. GROSS
VEHICLE
WEIGHT

46,010 96,720 lbs

(20,870 43,870 kg)

GROSS ENGINE 266 hp

POWER
(198 kW)
25 Tons (23 t)

HEAPED
CAPACITY

17.6 Yd3 (13.5 m3)

ARTICULATED TRUCK

TA25

MAX PAYLOAD

Specifications
Engine

Transmission

Make / Model
Type

Cummins QSC 8.3

Four cycle, emission certified, direct injection

diesel, 6 cylinder, in-line, water-cooled,
turbocharged and aftercooled.
505 in3 (8.3 L)

Piston displacement
Bore x stroke

4.49" x 5.32" (114 x 135 mm)

Gross power at 2,000 rpm (SAE J 1995) 280 hp (224 kW)

Net power at 2,200 rpm

(SAE J 1349) 266 hp (198 kW)

Maximum torque at 1,300 rpm

ZF 6WG 210 fully automatic transmission with manual

override. The transmission assembly consists of a torque
converter close-coupled to a countershaft type gearbox
with integral output transfer gearing. Automatic shifting
throughout the range, with kick-down feature. Lockup in
all forward gears. A torque-proportioning output differential
transmits drive permanently to front and rear axles. This
differential may be locked by the driver for use in difficult
traction conditions.
Forward

907 lbf ft (1,230 Nm)

Engine emission meets USA EPA Tier 3 / CARB MOH 40

CFR 89 Tier 3 and proposed EUNRMM (non-road mobile
machinery directive). 24 volt electric start. 70A alternator.
Two 12 volt 175 Ah batteries. Dry-type air cleaner with
safety element, automatic dust ejector and restriction
indicator. Modulating fan reduces noise level and
consumes engine power only when required.

Reverse

Gear

1st 2nd 3rd 4th

mph

3.7 5.6 8.8 13.7 20.1 32.3

5th 6th

3.7 8.8 20.1

R1 R2

R3

km/h

5.9 9.1 14.2 22.1 32.4 52.0

5.9 14.2 32.4

Specifications
Frame

Steering

Front and rear frames are all-welded high grade steel fabrications with
rectangular box-section beams forming the main side and cross
members. Inter-frame oscillation is provided by a large diameter
cylindrical coupling which houses nylon bushings. Frames articulate 45
to either side for steering by means of two widely-spaced pivot pins in
back-to-back sealed taper roller bearings.

Hydrostatic power steering by two double-acting cushioned steering

cylinders with pressure supplied by a variable displacement/load
sensing piston pump. Secondary steering pressure is provided by a
ground driven pump mounted on the transmission. An audible alarm
and warning light indicates should the secondary system activate.
System conforms to ISO 5010, (SAE J 53). Steering components are
protected by full flow filtration on the return line.

Axles

Steering angle to either side

Three axles in permanent all-wheel drive (6 x 6) with differential

coupling between each axle to prevent driveline wind-up. Heavy duty
axles with fully-floating axle shafts and outboard planetary reduction
gearing. Automatic limited slip differentials in each axle. Leading rear
axle incorporates a through-drive differential to transmit drive to the rear
most axle. This differential and the transmission output differential are
locked simultaneously using one switch selected by the driver.
Differential ratio

3.44:1

Planetary reduction

6.35:1

Overall drivetrain reduction

System pressure

Rims

Standard 25 x 19.50. For optional tire, 25 x 22.00

3,500 psi (241 bar)

Two single-stage, double-acting hoist cylinders, cushioned at both ends

of stroke. Variable displacement, load sensing piston pump driven from
power take-off on transmission. Full flow return line filtration. Full
electro-hydraulic hoist control, with electronic detent in power down.
System pressure

3,200 psi (220 bar)

Pump output flow rate

Tires and Wheels

Standard 23.5 R 25 two star radial. Optional 750/65 R25

Hoist

21.85:1

Tires

45

Lock to lock turns, steering wheel

77.6 gpm (4.9 L/sec)

Raise time, loaded

12 sec

Power down

7.5 sec

Body

Wheels

5-piece earthmover rims with 12 stud fixing

All welded construction, fabricated from high hardness (min. 360 BHN)
145,000 psi (1,000 MPa) yield strength steel.

Suspension

Front: Axle is carried on the leading arms of a sub-frame which pivots

on the main frame. Suspension by rubber elements with four heavy duty
hydraulic dampers.
Axle vertical travel

Plate thicknesses:

5" (127 mm)

Volume:

Rear: Each axle is coupled to the frame by three rubber-bushed links

with lateral restraint by a transverse link. Pivoting inter-axle balance
beams equalize load on each rear axle. Suspension movement is
cushioned by rubber/metal laminated compression units between each
axle and underside of balance beam ends.
Axle vertical travel

0.47 in (12 mm)

Sides

0.47 in (12 mm)

Front

0.31 in (8 mm)

Struck (SAE)

13.1 yd3 (10.0 m3)

Heaped 2:1 (SAE)

17.6 yd3 (13.5 m3)

Service Capacities

Fuel tank
Hydraulic system (steering & body)

5" ( 130 mm)

Axle oscillation

Floor and tailchute

Engine crankcase

12

Pivot points on leading and trailing links are rubber-bushed and

maintenance-free.

103.0 gal (390 L)

53.4 gal (202 L)
5.3 gal (20 L)

Cooling system

14.5 gal (55 L)

Transmission (including filters & cooler)

14.3 gal (54 L)

Differentials - front & rear (each)

4.5 gal (17 L)

Brakes

Differential - center

All hydraulic braking system with dry disc on each wheel and double
heavy-duty calipers per disc. Independent circuits for front and rear
brake systems. Brake system conforms to ISO 3450, (SAE J 1473).
Parking
Secondary

Planetaries (each)

Spring-applied, hydraulic-released disc on rear driveline

Secondary brake control actuates
rear service and parking brakes

RetardationGuillotine-type engine exhaust brake is standard and operates

automatically should the engine approach overspeed condition

4.9 gal (18.5 L)

0.8 gal (3.0 L)

Articulated Truck

TA25
Standard Equipment
CAB
Air conditioner R 134A
27,300 BTU/hr (8kW)
Cigarette lighter, 24V
Coat hook
Engine diagnostic facility
Heater and de-mister 32,400
BYU/hr (9.5w)
Hydraulic diagnostic facility
RS232
Inspection lamp socket, 24V
Insulation, thermal and acoustic
Interior Light
Mirrors, rear view (4)
Mug holder
Radio/Cassette player
ROPS/FOPS protection
(ISO 3471/3449, SAE J 1040,
Apr 88/SAE J231)
Seat belts, retractable
(SAE J 386)
Seat, operator air suspension,
high back, headrest and
adjustable arm rests
Seat, passenger
Steering wheel, tilt/telescopic
Storage compartment
Sun blind
Tinted glass
Transmission visual display unit
Window protection grille, rear
Wiper and washer, front and
rear windows
GAUGES
Fuel Level
Hourmeter
Speedometer, with odometer
Tachometer, with hourmeter
Transmission oil temperature
Water temperature
INDICATOR LIGHTS
Direction indicators
Headlight high beam
Turn signals
AUDIBLE ALARMS
Brakes, tractor, low pressure
Brakes, trailer, low pressure
Engine Stop
Transmission stop
Steering, low pressure
WARNING LIGHTS
Alternator not charging

Optional Equipment
Body Up
Brake pressure balance
Engine maintenance
Front/rear brake pressures
Check engine
Fuel, low level
Secondary steering
Inter-axle diff locks "on"
Parking brake "on"
Steering pressure
Stop engine
Transmission "stop"
Warning lights test button
Audible warning of low brake
pressure
GENERAL
Air Filter, dual element with
restriction indicator
Articulation locking bar
Articulation locking bar and
oscillation lock pin
Battery master switch
Body prop
Brake splash guards
Diagnostic pressure test points
Downshift inhibitor
Engine hood, hinged
Engine underguard, hinged
Exhaust muffler
Fan, modulating
Horn, electronic 117db
Hydraulic filter restriction
indicator
Hydraulic oil cooler
Mudflaps front
Neutral start interlock
Nitrogen inflated tires
Rear light guards
Reverse alarm, audible
(SAE J994)
Security kit
Servo body hoist
Tow points, front and rear
Transmission oil cooler with
modulating fan
Transmission sump guard
LIGHTS
Headlamps, 4, halogen
Highlevel working lamps
Side, tail, stop, reverse &
hazard warning and direction
indicators

GENERAL
Auto lube system
Cold start kit
Fast fuel adapter
Fire extinguisher
First aid kit
Headlamp guards, hinged
Mirror, front mounted
Mirror, wide angle
Mirrors, heated
Mud flaps, in front of leading
rear wheels
Parking brake guard
Seat, heated
Tachograph

Television monitor, rear view

Tool kit, hand
Tires, 750/65 R25
BODY OPTIONS
Exhaust heating
Liner plates
Side extensions
Spillguard extensions
Tailgate, scissor-chain operated
Tailgate - underhinged
LIGHTS
Beacon, flashing
Fog, rear
Reverse, flashing
Working, rear-facing

Weights
Net Distribution
Front axle
Bogie axle, leading
Bogie axle, trailing

24,050 lbs (10,910 kg)

10,890 lbs (4,940 kg)
11,070 lbs (5,020 kg)

Vehicle, Net

46,010 lbs (20,870 kg)

Payload

50,710 lbs (23,000 kg)

Gross Distribution
Front axle

32,210 lbs (14,610 kg)

Bogie axle, leading

32,100 lbs (14,560 kg)

Bogie axle, trailing

32,410 lbs (14,700 kg)

Vehicle, Gross
Bare chassis
Body
Hoists, pair

96,720 lbs (43,870 kg)

37,345 lbs (16,940 kg)
7,495 lbs (3,400 kg)
1,170 lbs (530 kg)

Articulated Truck

TA25
Performance Data (Graphs Based On 2% Rolling Resistance)
GRADEABILITY
40

30

400

kgf x
1 000
40

300

30

kN

20

15

40

30

RETARDA TION

VEHICLE WEIGHT
140 lb x 1 000

50 60

40

30
lbf x
1 000

kg x 1 000

400

kgf x
1 000
40

300

30

200

20

150

15

kN

15

80 100

50 60

20

40

30

VEHICLE WEIGHT
140 lb x 1 000
kg x 1 000

50 60

80

80
Net VW

Gross VW

50

40

30

Exhaust Brake

Net VW

50

Gross VW

30

40

60

60
25

25

50

50
200

20

150

15

20

40

15
1L

12

100

10

80

10
9
8
7

20
8

15
60

50

6
3

10
40

30

3
5

6
5

20

TOTA L % RESISTANCE Rolling plus Grade

TRACTIVE EFFORT (RIMPULL)

40

1C

30

15

30
12

100

10

20
80

60

50

10
9
8
7

15

6
5

10

40

30

20

15

1.5

6
5

15

20

TOTA L % RESISTANCE Rolling minus Grade

lbf x
1 000

80 100

50 60

1.5
3

10

10

1.0
km/h 0
SPEED
mile/h 0

10
5

20
10

40

30
15

20

25

50
30

1.0
km/h 0
SPEED
mile/h 0

60
35

10
5

20
10

50

40

30
15

20

25

30

60
35

Instructions: From intersection of vehicle weight and percentage resistance line read across to determine maximum gear attainability and ten downward for speed.

Dimensions
19' 8"
(6 m)

65

16' 5"
(5 m)
16' 2"
(4.7 m)
11' 3"
(3.5 m)
11' 2"
(3.4 m)
8' 6"
(2.6 m)

9' 10"
(3 m)

7' 0"
(2.1 m)
1' 6"
(405 mm)
5' 3"
(1.6 m)
7' 2"
(2.2 m)
9' 6"
(3 m)

2' 3"
(725 mm)

7' 9"
(2.4 m)

Max.
Body 3' 8"
Depth (1.1 m)

4' 4"
(1.3 m)

9' 8"
(2.9 m)
32' 0"
(9.8 m)

5' 6"
(1.7 m)

4' 9"
(1.4 m)

8' 9"
(2.7 m)
9' 5"
(2.9 m)

45

For more information, product demonstration, or details on purchase, lease and rental
plans, please contact your local Terex Distributor.

Terex Construction Americas

8800 Rostin Road
Southaven, MS 38671
USA

TEL 662-393-1800
SALES 866-837-3923
PARTS & TECH SUPPORT 888-201-6008
FAX 662-393-1700
EMAIL [email protected]
WEB terexca.com

Effective date: August 15, 2006. For further information, please contact your local distributor or the Terex sales office listed. Product specifications are subject to change without notice or obligation. The photographs and drawings
in this brochure are for illustrative purposes only. Refer to the appropriate Operator's Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator's Manual when using our equipment
or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular product
and sale. Terex makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries and
all rights are reserved. "Terex" is a Registered Trademark of Terex Corporation in the USA and many other countries. Copyright 2006 Terex Corporation
TA25 .5K 1006A Part #109087