Demag Drives
Demag Drives
Demag Drives
37643-2
Contents
The modular system
Offset geared motors
Angular geared motors
Helical geared motors
Gearbox options
Cylindrical-rotor motors and options
Conical-rotor brake motors
Microspeed drives
Online-Tools
Drive Designer
CalDrive
Demag Shop
Page
45
6
7
8
9
1013
1417
1819
2021
22
23
38333-3
37179-16
Helical gearbox
Cylindrical-rotor motor
Intermediate stage
Angular gearbox
Brake
Offset gearbox
Our cylindrical-rotor brake motors not only feature different brake spring strengths, but also two different brake
sizes for each motor frame size, enabling you to specify
your drives with finely graded brake torques. KB slidingrotor brake motors are also available.
Microspeed drives are designed for special requirements. They make it possible to achieve large mechanical
speed ratios of up to 1:500 between the main and the
positioning speed.
Coupling connection
KB conical-rotor motors and Z cylindrical-rotor motors with a Demag
coupling shaft end are fitted with a
flange, coupling or coupling housing.
Since there is no oil present in the
coupling housing, gearboxes can be
fitted independent of the motor and
motors can be easily disassembled,
e.g. to transport the installation.
Helical gearbox
Angular gearbox
Coupling
Brake
Offset gearbox
39392
Gearbox
size
Output
torque (Nm)
3-stage
A10
130
8.3252.5
A20
205
6.2128.0
31.7123
A30
370
7.7871.9
82.4156
A40
660
8.7861.6
73.8256
A50
1150
8.6971.6
78.0218
A60
2100
8.9167.9
77.2297
A70
3700
9.2368.1
78.9267
A80
6600
9.8968.9
80.3281
A90
11500
10.269.7
76.3274
38224
Universal type
Foot-mounted type
Flange-mounted type
28927-6
39388
Gearbox size
Output torque
(Nm)
2-stage
3-stage
4-stage
W10
120
5.34100
W20
200
5.4590.1
97.1369
W30
330
3.7390.1
107369
W40
500
3.8790.8
99.6371
W50
800
4.9494.3
99.9386
W60
1350
12.695.1
113388
W70
2500
13.7102
113399
W80
4000
15.3113
126441
W90
7000
15.9111
126434
W100
12000
16.5113
121485
Universal type
Foot-mounted type
Foot-mounted type
Flange-mounted type
39381
Gearbox
size
Output torque
(Nm)
2-stage
3-stage
D11
90
2.8866.5
D21
130
2.8866.5
D31
200
3.2361.6
66.4253
D41
330
3.2358.6
49.5240
D50
550
2.7861.4
71.9251
D60
1000
6.4448.4
57.5197
D70
1800
6.8951.3
56.7201
D80
3200
7.0349.5
55.5192
D90
5800
7.4951.2
55.1220
38364-13
Foot-mounted type
Flange-mounted type
Optional features
Standard
Demag geared motors already offer you an extremely
large variety of possibilities with functions tailored to
meet a wide range of requirements.
39484-2
39484-10
Cylindrical-rotor motors
outputs up to 45 kW
39385
Output
(kW)
40 % / 40 % CDF
10
Designation
Output
(kW)
100 % CDF
Designation
ZBA = braked
ZNA = no brake
0.06 / 0.25
ZBF 63 A 8/2
0.18
ZBA/ZNA 63 B4
0.09 / 0.34
ZBF 71 A 8/2
0.25
ZBA/ZNA 71 A4
0.13 / 0.5
ZBF 80 A 8/2
0.37
ZBA/ZNA 71 B4
0.2 / 0.8
ZBF 90 B 8/2
0.55
ZBA/ZNA 80 A4
0.29 / 1.2
0.75
ZBA/ZNA 80 B4
0.46 / 1.9
1.1
ZBA/ZNA 90 A4
0.72 / 2.9
1.5
ZBA/ZNA 90 B4
0.88/ 3.5
2.2
ZBA/ZNA 100 B4
ZBA/ZNA 112 A4
5.5
7.5
ZBA/ZNA 132 B4
9.5
ZBA/ZNA 132 C4
11
15
ZBA/ZNA 160 B4
18.5
ZBA/ZNA 180 A4
22
ZBA/ZNA 180 B4
30
ZBA/ZNA 200 A4
37
ZBA/ZNA225 AL4
45
ZBA/ZNA 225 B4
37132-1
Brakes
Demag ZBcylindrical-rotor brake
motors are fitted with double-surface disk brakes which are springactivated when no voltage is applied.
Various control modules are available
for electrical brake release to provide
operating times in line with application requirements.
Designation
Size
Brake
torques
(Nm)
Small brake
ZBF 63 A
ZBF 71 B
B003
ZBF 90 B
ZBF 112 A
ZBF 132 A
ZBF 132 B
Size
Brake
torques
(Nm)
Designation
39380
Size
Large brake
0.92.5
B007
0.92.3
B020
1.75.6
B020
1.75.6
B050
3.213
B050
3.213
Size
Brake
torques
(Nm)
Large brake
ZBA 63 B
B003
0.92.3
B007
1.37.9
B007
1.37.9
B020
3.320
B020
3.320
B050
8.350
B050
8.350
B140
23140
B140
23140
B280
46280
B280
46280
B680
113680
B680
113680
ZBA 71 B
ZBA 80 A
ZBA 80 B
ZBA 90 A
B140
Brake
torques
(Nm)
Small brake
ZBA 71 A
ZBF 80 A
ZBF 100 A
8.837
ZBA 90 B
ZBA 100 A(L)
ZBA 100 B
ZBA 112 A
ZBA 132 A(L)
ZBA 132 B
ZBA 132 C
ZBA 160 A(L)
ZBA 160 B
ZBA 180 A
38105-2
ZBA 180 B
ZBA 200 A
ZBA 225 A(L)
ZBA 225 B
11
Optional features
Brake options
Manual brake release unit
with lock
no lock
Microswitch for
Function checks
Adjustment monitoring
Sealed/increased enclosure
Reduced-noise design
Various brake control modules
38350-6
12
39577-4
39584
39297
38770-1
13
39439
Reliable function
When the motor is switched on, the
conical stator and rotor design causes
the drive force to develop in the
radial and axial directions. In this
way, the rotor is pulled towards the
drive end together with the brake
disk, and the brake is released at the
same moment as the rotor begins
to turn.
14
39446
Drives for starting and stopping with short cycle times: KBA
37391-14
Output
(kW)
40 % CDF
Designation
0.48
KBA 71 A4
Brake torque
(Nm)
6.7
0.72
KBA 71 B4
8.7
1.05
KBA 80 A4
14.5
1.3
KBA 80 B4
17.5
1.65
KBA 90 A4
23
2.0
KBA 90 B4
29
2.4
KBA 100 A4
38
KBA 100 B4
48
3.6
KBA 112 B4 A
56
4.5
KBA 112 B4
68
KBA 125 B4 A
82
7.4
KBA 125 B4
94
9.6
KBA 140 B4 A
130
11.5
KBA 140 B4
166
20
KBA 160 B4
215
30
KBA 180 A4
335
40
KBA 200 B4
430
55
KBA 225 B4
610
15
Output
(kW)
40 % / 40% CDF
Designation
0.04 / 0.2
KBF 71 A 8/2
Brake torque
(Nm)
1.4
0.06 / 0.3
KBF 71 B 8/2
1.6
0.13 / 0.5
KBF 80 A 8/2
3.2
0.2 / 0.8
KBF 90 A 8/2
5.2
0.26 / 1.2
7.0
0.42 / 1.9
11.8
0.65 / 2.9
17
1.1 / 4.5
24.3
37401-7
16
Torque
(Nm)
100 % CDF
Designation
1.7
KBS 80 B12
2.6
KBS 90 B12
3.6
5.6
10
25631
17
FG microspeed drives
speed ratios up to 500:1
39389
FG 06
FG 08
FG 10
Main
motor
71
80
90
100
112
125
140
63
71
80
90 A
90 B
100
112
132
KB 71
KB 80
KB 90
KB 100
KB 112
KB 112
KB 125
KB 140
KB 160
KB 160
KB 180
KB 200
KB 225
= U or Z mounting arrangement
O = Z mounting arrangement
18
38345-5
Speed n
Main motor
19328
Startup
Operation
Braking
Time t
Microspeed operation
1 Main motor in braking position
2 Main motor coupling engaged
3 Microspeed motor in running position
19
37399-2
www.demag-drivedesigner.com
20
3D product geometries
Complete overview
the geared motor catalogue
Our approx. 500-page catalogue provides comprehensive
information on our three geared motor types helical,
angular and offset geared motors in combination with
cylindrical-rotor and conical-rotor motors. It also includes
selection tables relating to the various geared motor
types, structured according to output ratings. It also
provides you with technical data and details on the
options.
21
The basic characteristics and data of Demag geared motors and wheel blocks are included in CalDrive. Drives for
travel and hoist applications can be specified with ease.
The program suggests solutions for the combination of our
offset, angular and helical gearboxes with cylindrical or
conical-rotor motors. You can, of course, also determine
drive solutions for line-fed or frequency inverter systems.
Besides the technical data, you are also shown acceleration
and deceleration values in the result. You can request the
current version of the multi-lingual CalDrive calculation
program on CD-ROM free of charge at
www.drives.demagcranes.com.
22
www.demag-shop.com
Direct order
Shopping basket
23
www.demagcranes.com
24