Scribd Logo
Upload

Welcome to Scribd!

  • 90 views

    520 en

    Uploaded by

    thanhduong88
    The compact type 520 pressure transmitter is suitable for use with all types of refrigerants including ammonia. It has a compact, rugged construction with welded components and no elastomer seals. It offers a selection of electrical and pressure connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    520 en

    Uploaded by

    thanhduong88
    90 views7 pages
    The compact type 520 pressure transmitter is suitable for use with all types of refrigerants including ammonia. It has a compact, rugged construction with welded components and no elastomer seals. It offers a selection of electrical and pressure connections.

    Original Description:

    manual

    Original Title

    520_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The compact type 520 pressure transmitter is suitable for use with all types of refrigerants including ammonia. It has a compact, rugged construction with welded components and no elastomer seals. It offers a selection of electrical and pressure connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    90 views7 pages

    520 en

    Uploaded by

    thanhduong88
    The compact type 520 pressure transmitter is suitable for use with all types of refrigerants including ammonia. It has a compact, rugged construction with welded components and no elastomer seals. It offers a selection of electrical and pressure connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    Relative pressure

    transmitter type 520


    Pressure range
    0 ... 2.5 600 bar

    The compact type 520 pressure transmitter is based upon the


    Huba Control developed thick film technology where the pressure measuring cell is fully welded.
    This transmitter meets the high burst protection demands
    and is suitable for the use in all types of refrigerants inclusive
    ammonia.

    Compact, rugged construction


    Welded without sealing parts, no
    elastomer seals
    Saving time by quick cable mounting
    by the customer with swift connector
    Large selection of connections available.

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    1/7

    Technical overview
    Pressure range
    Relative

    0 ... 2.5

    Operating conditions
    Medium

    600 bar

    Liquids, gases and refrigerants (incl. ammonia)


    Medium
    -40 ... +135 C
    Ambient
    -30 ... +85 C
    Storage
    -50 ... +100 C
    0 ... 6 bar
    5 x FS
    10 ... 600 bar
    3 x FS (max. 1500 bar)
    0 ... 6 bar
    10 x FS
    10 ... 600 bar
    6 x FS (max. 2500 bar)

    Temperature
    Tolerable overload
    Repture pressure
    Materials
    Cover
    Plug accommodation
    Pressure connection
    Sensor

    Materials in contact with medium

    Stainless steel 1.4305 / AISI 303 (1.4404 / AISI 316L on request)


    Polyarylamide 50% GF VO
    Stainless steel 1.4305 / AISI 303 (1.4404 / AISI 316L on request)
    Stainless steel

    Electrical overview
    2 wire
    2 wire (Ex)

    3 wire

    Polarity reversal protection

    Output
    Power supply
    Load
    Current consumption
    voltage - 7 V
    4 ... 20 mA
    7 ... 33 VDC
    < supply
    [Ohm]
    < 23 mA
    0.02 A
    voltage - 10 V
    [Ohm]
    < 20 mA
    4 ... 20 mA
    10 ... 30 VDC
    < supply0.02
    A
    0 ... 5 V
    8 ... 33 VDC
    >10 kOhm / < 100 nF
    < 7 mA
    1 ... 6 V
    8 ... 33 VDC
    >10 kOhm / < 100 nF
    < 7 mA
    0 ... 10 V
    12 ... 33 VDC
    >10 kOhm / < 100 nF
    < 7 mA
    0 ... 10 V
    24 VAC 15%
    >10 kOhm / < 100 nF
    < 7 mA
    ratiom. 10 ... 90%
    5 VDC 10%
    >10 kOhm / < 100 nF
    < 7 mA
    Short circuit proof and protected against polarity reversal. Each connection is protected against crossover up to max. supply voltage.

    Protection class
    Protection class III
    Dynamic response
    Response time
    Load cycle

    < 2 ms, 1 ms typ.


    < 100 Hz

    Protection standard
    Connector DIN EN 175301-803, Braids
    Connector RAST 2.5
    Swift connector, Metri Pack, Connector M12x1

    IP 65
    IP 00
    IP 67

    Electrical connection
    Swift connector with or without cable 1.5 m (PVC spec.)
    Connector DIN EN 175301-803-A
    Connector DIN EN 175301-803-C (mini DIN)
    Metri Pack Serie 150
    Connector M12x1
    Braids
    Connector RAST 2.5 (3 wire only)
    Pressure connection
    Inside thread

    Outside thread

    7
    /16 - 20 UNF
    G
    7
    /16 - 20 UNF
    -18 NPT
    G
    R
    G
    G

    Schrader
    with O-Ring seal FPM spec. (-30 ... +135 C)

    sealed at back DIN 3852 form E with Profile seal ring in FPM spec. (-30 ... +135 C)
    DIN 2999
    sealed at back and manometer (combi) with Profile seal ring in FPM spec. (-30 ... +135 C)
    sealed at front

    Installation arrangement
    Unrestricted
    Tests / Admissions
    Electromagnetic compatibility
    Shock acc. IEC IEC 68-2-27
    Constant shock acc. IEC 68-2-29
    Vibration acc. IEC 68-2-6

    CE conformity acc. EN 61326-2-3


    100 g, 11 ms half sine wave, all 6 directions, free fall from 1 m on concrete (6x)
    40 g for 6 ms, 1000x all 3 directions
    20 g, 15 ... 2000 Hz, 15 ... 25 Hz with amplitude 15 mm, 1 Octave/min. all 3 directions, 50 constant load

    Protection against explosion


    Intrinsic safety "i" (with current output only)
    EC type examination certificate
    Connection to certified intrinsically safe resistive circuits with maximum values
    Effective internal inductance and capacitance for versions with plugs complying with EN 175301-803-A or M12x1

    Ex II 1/2 G Ex ia IIC T4 Ga/Gb


    Ex II 1/2 D Ex ia IIC T125C Da/Db
    SEV 10 ATEX 0145
    Ui = 30 VDC; Ii = 100 mA = Pi = 0.75 W
    Li = 0 nH; Ci = 0 nF

    Weight
    ~ 90 g
    Packaging (Please state on order)
    Single packaging in cardboard
    Multiple packaging in cardboard (25 pcs)

    2/7

    accessories integrated

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    Accuracy acc. to EN 60770-1


    Parameter

    Test conditions:

    Unit

    Characteristic line (at reference conditions)


    Resolution
    Thermal characteristic 2)

    1)

    % fs
    % fs
    % fs/10K

    25 C, 45% RH, power supply 24 VDC

    0.8
    0.1
    0.2

    Order code selection table in bar


    Pressure range

    3)

    Version
    Output / power supply

    Electrical connection 4)

    Pressure connection 6)

    Material
    Pressure range variation

    520.9 X X X X X X X X X X

    0 ... + 2.5 bar


    0 ... + 4 bar
    0 ... + 6 bar
    0 ... + 10 bar
    0 ... + 16 bar
    0 ... + 25 bar
    0 ... + 40 bar
    0 ... + 60 bar
    0 ... + 100 bar
    0 ... + 160 bar
    0 ... + 250 bar
    0 ... + 400 bar
    0 ... + 600 bar
    Not free of oil and grease, (cell welded)
    Free of oil and grease, (cell welded without sealing parts)
    0 ... 5 V
    7 ... 33 VDC
    1 6V
    8 33 VDC
    0 10 V
    12 33 VDC
    0 10 V
    24 VAC 15%
    Ratiom. 10 ... 90%
    5 VDC 10%
    4 20 mA
    7 33 VDC
    4 20 mA
    10 30 VDC
    Ex protection
    Swift connector
    Connector DIN EN 175301-803-A
    Connector DIN EN 175301-803-C (Mini DIN)
    Connector M12x1 5)
    2w: IN=1 / OUT=3 3w: IN=1 / OUT=4 / GND=3
    Connector M12x1 5)
    2w: IN=1 / OUT=4 3w: IN=1 / OUT=3 / GND=4
    Connector RAST 2.5
    Metri Pack Serie 150 5)
    Braids
    80 10 mm
    Braids
    290 10 mm
    Braids
    480 10 mm
    Braids
    730 10 mm
    Swift connector with cable 1.5 m
    7
    Inside thread
    /16 -20 UNF Schrader
    Inside thread
    G wiht O-Ring seal FPM spec. (-30 ... +135 C)
    7
    Outside thread
    /16 -20 UNF
    Outside thread
    -18 NPT
    Outside thread
    G sealed at back DIN 3852 form E
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    R acc. to DIN 2999
    Outside thread
    G sealed at back and manometer (combi)
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    G sealed at front
    Stainless steel 1.4305 / AISI 303 (Stainless steel 1.4404 / AISI 316L on request)
    Indicate W and state range on order (e.g.: W0... + 3bar/OUT0...5V)

    1
    1
    1
    3
    3
    3
    3
    4
    4
    4
    4
    5
    5

    4
    5
    7
    0
    1
    2
    3
    0
    1
    2
    3
    4
    5
    S
    S

    0
    1

    0
    0

    1
    6
    2
    8 1,2,6
    7
    3
    4 1,3
    0
    1
    2
    3
    M
    7 4
    5
    6
    7
    8
    9
    L
    0
    1
    2
    3

    0
    0
    0
    0

    4
    7

    0
    0

    8
    9

    0
    0
    N
    W

    Accessories
    Order number
    107359
    103510
    104244
    106975

    Swift connector
    Female connector DIN EN 175301-803-A with seal
    Female connector DIN EN 175301-803-C (mini DIN) with seal
    Female connector for connector M12x1

    1)
    5)

    2)
    incl. zero point, full scale, linearity, hysteresis and repeatability
    -15 ... 85 C
    For pressure ranges < 16 bar only possible if deareation through the cable is assured

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    3)
    6)

    Other pressure ranges on request


    Other pressure connections on request

    4)

    Delivery without female connector

    3/7

    Order code selection table in psi


    Pressure range

    1)

    Version
    Output / power supply

    Electrical connection 2)

    Pressure connection 4)

    Material
    Pressure range variation

    1)
    3)

    4/7

    520.9 X X X X X X X X X X

    0 ... + 30 psi
    0 ... + 60 psi
    0 ... + 100 psi
    0 ... + 200 psi
    0 ... + 300 psi
    0 ... + 500 psi
    0 ... + 750 psi
    0 ... + 1000 psi
    0 ... + 2000 psi
    0 ... + 3000 psi
    0 ... + 5000 psi
    0 ... + 7500 psi
    Not free of oil and grease, (cell Welded)
    Free of oil and grease, (cell Welded without sealing parts)
    0 ... 5 V
    7 ... 33 VDC
    1 6V
    8 33 VDC
    0 10 V
    12 33 VDC
    0 10 V
    24 VAC 15%
    Ratiom. 10 ... 90%
    5 VDC 10%
    4 20 mA
    7 33 VDC
    4 20 mA
    10 30 VDC
    Ex protection
    Swift connector
    Connector DIN EN 175301-803-A
    Connector DIN EN 175301-803-C (mini DIN)
    Connector M12x1 3)
    2w: IN=1 / OUT=3 3w: IN=1 / OUT=4 / GND=3
    Connector M12x1 3)
    2w: IN=1 / OUT=4 3w: IN=1 / OUT=3 / GND=4
    Connector RAST 2.5
    Metri Pack Serie 150 3)
    Braids
    80 10 mm
    Braids
    290 10 mm
    Braids
    480 10 mm
    Braids
    730 10 mm
    Swift connector with cable 1.5 m
    7
    Inside thread
    /16 -20 UNF Schrader
    Inside thread
    G wiht O-Ring seal FPM spec. (-30 ... +135 C)
    7
    Outside thread
    /16 -20 UNF
    Outside thread
    -18 NPT
    Outside thread
    G sealed at back DIN 3852 form E
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    R acc. to DIN 2999
    Outside thread
    G sealed at back and manometer (combi)
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    G sealed at front
    Stainless steel 1.4305 / AISI 303 (Stainless steel 1.4404 / AISI 316L on request)
    Indicate W and state range on order (e.g.: W0... + 400psi/OUT1...8V)

    Other pressure ranges on request


    For pressure ranges < 16 bar only possible if deareation through the cable is assured

    2)
    4)

    B
    B
    B
    C
    C
    C
    D
    D
    D
    D
    E
    E

    4
    5
    7
    1
    2
    3
    0
    1
    2
    3
    4
    5
    S
    S

    0
    1

    0
    0

    1
    6
    2
    8 1,2,6
    7
    3
    4 1,3
    0
    1
    2
    3
    M
    7 4
    5
    6
    7
    8
    9
    L
    0
    1
    2
    3

    0
    0
    0
    0

    4
    7

    0
    0

    8
    9

    0
    0
    N
    W

    Delivery without female connector


    Other pressure connections on request

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    Order code selection table in MPa


    Pressure range

    1)

    Version
    Output / power supply

    Electrical connection 2)

    Pressure connection 4)

    Material
    Pressure range variation

    1)
    3)

    520.9 X X X X X X X X X X

    0 ... + 0.25 MPa


    0 ... + 0.4 MPa
    0 ... + 0.6 MPa
    0 ... +
    1 MPa
    0 ... + 1.6 MPa
    0 ... + 2.5 MPa
    0 ... +
    4 MPa
    0 ... +
    6 MPa
    0 ... + 10 MPa
    0 ... + 16 MPa
    0 ... + 25 MPa
    0 ... + 40 MPa
    0 ... + 60 MPa
    Not free of oil and grease, (cell welded)
    Free of oil and grease, (cell welded without sealing parts)
    0 ... 5 V
    7 ... 33 VDC
    1 6V
    8 33 VDC
    0 10 V
    12 33 VDC
    0 10 V
    24 VAC 15%
    Ratiom. 10 ... 90%
    5 VDC 10%
    4 20 mA
    7 33 VDC
    4 20 mA
    10 30 VDC
    Ex protection
    Swift connector
    Connector DIN EN 175301-803-A
    Connector DIN EN 175301-803-C (mini DIN)
    Connector M12x1 3)
    2w: IN=1 / OUT=3 3w: IN=1 / OUT=4 / GND=3
    Connector M12x1 3)
    2w: IN=1 / OUT=4 3w: IN=1 / OUT=3 / GND=4
    Connector RAST 2.5
    Metri Pack Serie 150 3)
    Braids
    80 10 mm
    Braids
    290 10 mm
    Braids
    480 10 mm
    Braids
    730 10 mm
    Swift connector with cable 1.5 m
    7
    Inside thread
    /16 -20 UNF Schrader
    Inside thread
    G wiht O-Ring seal FPM spec. (-30 ... +135 C)
    7
    Outside thread
    /16 -20 UNF
    Outside thread
    -18 NPT
    Outside thread
    G sealed at back DIN 3852 form E
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    R acc. to DIN 2999
    Outside thread
    G sealed at back and manometer (combi)
    with Profile seal ring in FPM spec. (-30 ... +135 C)
    Outside thread
    G sealed at front
    Stainless steel 1.4305 / AISI 303 (Stainless steel 1.4404 / AISI 316L on request)
    Indicate W and state range on order (e.g.: W0... + 0.5MPa/OUT1...8V)

    Other pressure ranges on request


    For pressure ranges < 16 bar only possible if deareation through the cable is assured

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    2)
    4)

    G
    G
    G
    H
    H
    H
    H
    K
    K
    K
    K
    L
    L

    4
    5
    7
    0
    1
    2
    3
    0
    1
    2
    3
    4
    5
    S
    S

    0
    1

    0
    0

    1
    6
    2
    8 1,2,6
    7
    3
    4 1,3
    0
    1
    2
    3
    M
    7 4
    5
    6
    7
    8
    9
    L
    0
    1
    2
    3

    0
    0
    0
    0

    4
    7

    0
    0

    8
    9

    0
    0
    N
    W

    Delivery without female connector


    Other pressure connections on request

    5/7

    Dimensions in mm / Electrical connections


    3 wire

    2 wire
    Connector DIN EN
    175301-803-C
    1)

    1)

    1 (IN) 2 (OUT)

    1 (IN) 2 (OUT) 3 (GND)

    brown

    brown
    Swift connector

    white

    green

    green

    1 (IN) 2 (OUT)

    1 (IN) 2 (GND) 3 (OUT)

    Connector DIN EN
    175301-803-A

    1)

    1)

    1 (IN) 2 (OUT)

    1 (IN) 2 (OUT) 3 (GND)

    1 (IN) 3 (OUT)

    1 (IN) 4 (OUT) 3 (GND)

    1 (IN) 4 (OUT)

    1 (IN) 3 (OUT) 4 (GND)

    B (IN) A (OUT)

    B (IN) C (OUT) A (GND)

    G 1/4 inside

    Connector M12x1

    Metri Pack

    Inside thread
    7/16 -20 UNF
    Schrader
    Connector RAST 2.5

    Braids

    red

    red
    black

    blue

    blue

    Device design with explosion protection: 4 ... 20 mA


    The grounding connection is conductively connected to
    the transmitter housing.

    1)

    6/7

    Connector DIN
    EN 175301-803-A (Ex)

    Connector M12x1 (Ex)

    1 (IN) 2 (OUT)

    1 (IN) 3 (OUT) 4 ( )

    Not connected with transmitter housing

    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    Huba Control AG
    Headquarters Schweiz
    Industriestrasse 17
    5436 Wrenlos
    Telefon +41 (0) 56 436 82 00
    Telefax +41 (0) 56 436 82 82
    [email protected]

    Huba Control AG
    Niederlassung Deutschland
    Schlattgrabenstrasse 24
    72141 Walddorfhslach
    Telefon +49 (0) 7127 23 93 00
    Telefax +49 (0) 7127 23 93 20
    [email protected]

    Huba Control SA
    Succursale France
    Rue Lavoisier
    Technople Forbach-Sud
    57602 Forbach Cedex
    Tlphone +33 (0) 387 847 300
    Tlcopieur +33 (0) 387 847 301
    [email protected]

    Huba Control AG
    Vestiging Nederland
    Hamseweg 20A
    3828 AD Hoogland
    Telefoon +31 (0) 33 433 03 66
    Telefax +31 (0) 33 433 03 77
    [email protected]

    Huba Control AG
    Branch Office United Kingdom
    Unit 3 Network Point, Range Road
    Witney Oxfordshire OX29 0YD
    Phone +44 (0) 1993 776667
    Fax
    +44 (0) 1993 776671
    [email protected]

    Huba Control AG
    Rep. Office Singapore
    No. 16 Ayer Rajah Crescent Witney
    #06-06B Tempco Technominium
    139965 Singapore
    Phone +65 (0) 61 004 822
    Fax
    +65 (0) 63 994 822
    [email protected]

    Huba Control AG
    Rep. Office China
    CBC Building, 49A Wuyi Road
    Shanghai 200050
    Phone +86 (0) 21 511 808 21
    Fax
    +86 (0) 21 515 520 99
    [email protected]

    www.hubacontrol.com
    Huba Control type 520 - Technical data subject to change - Edition 02/2012A

    7/7

    You might also like