FIAT

MULTIPLA

Bluetooth

TABLE OF CONTENTS
OVERVIEW .......................................................................................................................... 4
SYSTEM COMPONENTS ................................................................................................ 5
COMPATIBLE MOBILE PHONES .................................................................................. 5
ACTIVATING THE HANDS-FREE KIT ........................................................................ 6
PAIRING YOUR MOBILE PHONE AND THE HANDS-FREE KIT
FOR THE FIRST TIME ........................................................................................................ 6
PAIRING WITH OTHER ADDITIONAL PHONES .................................................. 6
CLEARING THE MEMORY .............................................................................................. 7
PAIRING PRIORITY .......................................................................................................... 7
COMMUNICATING .......................................................................................................... 7
ERICSSON/SONY ERICSSON PHONES .................................................................... 8
NOKIA 6310, 6310i, 6650, 7600, 8910 PHONES ...................................................... 10
NOKIA 3650, 3660, N-GAGE, AND SIEMENS SX11 PHONES............................ 11
TROUBLESHOOTING ...................................................................................................... 13

HANDS-FREE KIT WITH VOICE RECOGNITION

AND Bluetooth wireless technoogy

OVERVIEW

Bluetooth wireless technology enables wireless connection between

your mobile phone and the hands-free
kit installed on your car.
Communication is based on the
transmission of radio shortwaves, that
exchanges data and voice at a speed of
approx. 1 Mb/sec. within a range of
about 10 metres.
The radio frequency used by Bluetooth wireless technology is not subject to restrictions or limitations and
is free of charge.

The hands-free kit with voice recognition enables to make and receive
calls safely and securely under whatever driving condition without removing your hands from the steering
wheel as required by current regulation.

automatic storage of your telephone directory (only available with

Ericsson/SonyEricsson phones);

The system installed on your car offers you the following functions:

starting/answering/refusing calls
with voice command (according to
mobile phone type);

automatic mute of the car radio

during calls;
hands-free conversation;
conversation diffusion through car
speakers;
pairing of up to three mobile
phones with activation of one mobile
phone at a time (for connection priority see next pages);
voice recognition (according to
mobile phone type);

use of different telephone numbers

for each contact (e.g. home, work, cellular according to mobile phone type);

volume adjustment through phone

menu and through sound system volume controls (see the Sound System
manual);
confidential conversation mode,
to switch from hands-free mode to
phone mode (according to mobile
phone type);
echo and background noise reduction.

SYSTEM COMPONENTS
The hands-free kit consists of the following main components:
electronic control box
microphone
keypad
The electronic control box, located
in the dashboard, houses the Bluetooth wireless technology radio
transmitter, the signal processing microprocessor and the operating software.
The high-grade microphone housed
in the front roof lamp has been designed to guarantee optimum communication under whatever condition.

to redial the last number called;

to activate the confidential mode.

COMPATIBLE MOBILE
PHONES

Press button B-fig. 1:

to end the communication;
to refuse a call.

Compatible mobile phones are those

tabulated below:
Make

Press buttons A and B-fig. 1 simultaneously for at least 2 seconds for clearing the system
memory.
IMPORTANT Clearing the memory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

Ericsson

R520, T39m, T68m

Motorola

V500, V525, V600

270C, 280i

Nokia

Panasonic
Philips

The keypad fig. 1, located on the

panel housing the rear power window
controls, features two buttons, A and
B-fig. 1, to be used for controlling
every function of the hands-free kit.

Siemens
F0E0695m

Sony Ericsson

Press button A-fig. 1:

to activate voice recognition;
to answer a call or dual call;

Model

PDA/Smartphone

3650/3660,
6310, 6310i, 6600,
6650, 7600,
8910, 8910i, N-Gage,
X70
Fisio 820, Fisio 825
S55, S56, SX1
T68i, P800,
P900,T606/
T610/T630,
Z600/Z608
E200, XDA II

fig. 1

ACTIVATING THE HANDSFREE KIT

After first pairing, just turn the ignition key to MAR to activate the system. To pair your phone and the
hands-free kit after first pairing, get into the car with your phone on and the
Bluetooth function active.
PAIRING YOUR MOBILE
PHONE AND
THE HANDS-FREE KIT FOR
THE FIRST TIME
To pair your mobile phone with your
hands-free kit for the first time you
shall activate the Bluetooth function
on your phone as described on your
phone users guide. The corresponding icon is displayed on your phone
when the function is active.
When pairing for the first time, the
message Accoppiare lapparecchio
(pair kit) will be heard (the message will
always be in Italian since it is the default
language). Phone/hands-free kit pairing
procedure described in the phone
manual shall therefore be carried out
(follow the pairing instructions given
on your phone users guide).
6

IMPORTANT When the use of

the hands-free kit with Bluetooth
wireless technology is not desired,
message Accoppiare lapparecchio
(pair kit) can be prevented from being
repeated by setting car radio channel
PHONE minimum volume (see Sound
System manual). Turn the sound system on to hear message Accoppiare
lapparecchio (pair kit).
During the pairing procedure
the message asking for the passcode will be displayed; enter
1234 as passcode and then confirm it.
Once this done, connection between
your phone and your hands-free kit
will take place automatically as soon
as the two devices are less than a few
meters apart. A beep will be heard,
indicating that connection is established. Here follows an example of first
pairing procedure for the most common mobile phones.

IMPORTANT The system operates only when the ignition key is

turned to MAR. Pairing procedure
shall be performed only the first time
you pair your phone and your handsfree kit. Should instruction Accoppiare lapparecchio (pair kit) not be
heard at first pairing, reset the system
by pressing simultaneously buttons Afig. 1 and B-fig. 1 on the keypad for
2 seconds at least.
PAIRING WITH OTHER
ADDITIONAL PHONES
If you decide to pair another phone,
you just have to follow the ordinary
pairing procedure described in the
previous paragraph, in this way you
can connect up to 3 mobile phones.
To pair other phones you shall reset
the system (any phone number stored
will be cleared).

CLEARING
THE MEMORY

COMMUNICATING

Press the green A-fig. 1 and red Bfig. 1 buttons simultaneously for at least
2 seconds for clearing the system memory.

Find below a description of the main

communication procedures valid for
almost all mobile phones.

IMPORTANT Clearing the memory will disconnect all stored phones, will
clear any phone number stored in the
system memory and will require to repeat the pairing phase.

Making a call manually:

PAIRING PRIORITY

the call will be switched automatically to hands-free mode (on certain

phone models, e.g. SIEMENS S55, button A-fig. 1 must be pressed to shift
the telephone call to hands-free
mode).

If 2 mobile phones at least are paired,

the first phone paired (in chronological order) will have highest priority.
This means that when getting into the
car with system active (key at MAR),
this will be the first phone to be
searched and, if present, to be connected. Should the priority phone not
be found, the system will then search
for the other phones.

dial the number on the mobile

phone keypad;
press directly the phone button to
start the call;

Making a call using the voice

recognition (after assigning a
voice tag to a phonebook
entry):
press button A-fig. 1 on the keypad;

wait for sound signal to be heard

and/or PHONE writing to appear on
sound system display;
pronounce the name of the person
you wish to call;
the system will repeat the name for
confirmation and then will start the
call;
if the name pronounced by the system is not the required one, press button B-fig. 1 on the keypad and repeat
the procedure.
Call through voice recognition is possible only if voice tags have been assigned to phonebook entries.
The hands-free kit recognises all
voice tags recorded on the phone thus
enabling to call with voice recognition
any voice tagged number.
It is however possible to store (according to mobile phone type) voice
tags directly in the hands-free kit memory but, in this case, the hands-free kit
will recognise just those voice tags.

IMPORTANT Voice prompts are

recognised by the system only if properly recorded, for this reason you have
to speak out naturally and clearly.
To obtain optimum operation,
please, comply with these recommendations:
close the doors and windows;
turn off your engine and ventilation
(key at MAR);
make the recording from the drivers seat;
if using long names (e.g.: John
Brown instead of John) notice that
the system will record a voice tag for
max. 2 seconds.
IMPORTANT Before using voice
prompts check that Bluetooth wireless technology, Voice recognition
and Wordspotting functions on
your phone are active (according to
mobile phone type). Voice recognition
performances are available and depending on mobile phone model used.

Answering a call:
press button A-fig. 1 on the keypad.
Refusing a call:
press button B-fig. 1 on the keypad.
Ending a call:
press button B-fig. 1 on the keypad.
To redial last number called:
press button A-fig. 1 on the keypad and keep it pressed up to redialling of the number.
Dual call (according to mobile
phone type):
press keypad button B-fig. 1 to
refuse the new call;
press keypad button A-fig. 1 once
to pick up the new call;
press button A-fig. 1 once again to
return to the first call;

to end the call, press button B-fig.

1 once.
IMPORTANT The second call can
be accepted or refused only if the
Avviso di chiamata (Call waiting)
function on your phone is active.
ERICSSON/SONY ERICSSON
PHONES
Assigning a voice tag to a name
From the Connectivity menu, select Accessories;
select the system menu;
select Phone book;
select List (the list of your phone
book entries will be displayed);
choose a name and select it;
you will hear the system prompt,
then you have to pronounce clearly
the name displayed towards the microphone located in the front roof
lamp;

 the system will repeat the name

and ask you to repeat it for confirmation.

You need to record keywords for

use with Wordspotting option, proceed as follows:

Repeat the procedure for each name

to be voice tagged.

from the Connectivity menu, select Accessories;

For proper recording of voice tags

comply with these recommendations:
make recording in quite place;
close the doors and windows;
turn off your engine, radio and ventilation;
speak out clearly and naturally towards the microphone.
Keywords
The hands-free kit has two preset
voice prompts (Telephone and
Hang up). Telephone is used to
call or answer a call (function of button A-fig. 1 on the keypad, whereas
Hang up is used to refuse or end a
call (function of button B-fig. 1).

select the system menu;

select Voice recognition;
select Keywords;
select the word to be recorded
(Telephone or Hang up);
you will hear the system prompt,
then you have to pronounce clearly
the name displayed towards the microphone located in the front roof
lamp;
the system will repeat the name
and ask you to repeat it for confirmation.

Making a call using the

Wordspotting option:
pronounce the keyword Telephone;
wait for the beep;
pronounce the name you wish to
call;
the system will repeat it for confirmation and then will start the call;
if the name pronounced by the system is not the one you desire, say
Hang up or press button B-fig. 1 on
the keypad and repeat the procedure.
Answering/refusing/ ending a
call using the Wordspotting
option:
IMPORTANT The Wordspotting option (for answering, refusing
or ending a call through voice
prompts) is variable and it depends on
the type of cellular phone being used.
For certain models it may therefore
be necessary to press first buttons Afig. 1 and B-fig. 1 and then pronounce the Wordspotting required
to answer, to refuse or to end a call.

 to answer a call say Telephone;

Clearing the system memory

to hang up say Hang up;

to refuse a call say Hang up.

Press and hold simultaneously both

buttons A-fig. 1 and B-fig. 1 on the
keypad;

Copying the phone book to

hands-free kit system memory

reset will be announced by the system.

Bluetooth wireless technology enables to copy the cellular phone book

to the hands-free kit system memory.

IMPORTANT Clearing the memory will disconnect all stored phones,

will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

IMPORTANT You can only copy

the entries stored in phone memory,
therefore before copying your phone
book to the system memory, you are
recommended to transfer all entries
from the SIM card to the phone memory.
Copying the phone book:
from the Connectivity menu, select Accessories;
select the system menu;
the system will start data transfer
and display a message on the phone;
at the end of operation another
message will be displayed.

10

Adjusting the volume

Use the keys of the handset to adjust
the volume of the conversation.
NOKIA 6310, 6310i, 6650,
7600, 8910 PHONES
IMPORTANT After getting into
the car and turning the ignition key to
MAR, your phone should ask you
whether to establish the connection.
If you want to, you can disable this
function. To do that, go into the phone

menu and select the Bluetooth

wireless technology option and then
View paired devices; when the system name is displayed select Options and then Request conn. Authorisation.
Storing names
To assign a voice tag to a name, access your phone book, find the desired
name and click in sequence on Details, Options and Add voice tag.
The following message is displayed
Press Start then speak after the
tone. Then press Start and say the
name.
To remove the voice tag for any
name, access your phone book and
click in sequence on Details, Options and Voice tag.
By clicking Change you can rerecord over the voice tag.
By clicking Erase you will delete the
voice tag recording.

Communicating
Making a call
manually
Use the phone keypad to dial the
number. Your call will be connected
automatically in hands-free mode. Keypad buttons A-fig. 1 and B-fig. 1 are
the tools for making and receiving calls.
Making a call using the voice
recognition
Press button A-fig. 1 on the keypad
and wait for the tone. Then say the
name of the person you want to call.
To redial last number called
Press button A-fig. 1 on the keypad
and keep it pressed up to redialling of
the number.
Answering a call
Press button A-fig. 1 on the keypad.

Refusing a call
Press button B-fig. 1 on the keypad.
Dual call
Press the keypad button B-fig. 1
to refuse the new call.
Press the keypad button A-fig. 1
once to communicate with new caller.
Press button A-fig. 1 once again to
return to your first caller.
Press button B-fig. 1 once to end
the communication.
Adjusting the volume
Use the keys of the handset to adjust
the volume of the conversation.
Conversation in confidential
mode
Press the keypad button Afig. 1 briefly to switch the conversation to hands-free or handset mode.

Clearing the memory

Press and hold pressed simultaneously both buttons A-fig. 1 and B-fig.
1 on the keypad.
IMPORTANT Clearing the memory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.
NOKIA 3650, 3660, N-GAGE,
6600 AND SIEMENS SX1
PHONES
IMPORTANT After getting into
the car and turning the ignition key to
MAR, your phone should ask you
whether to establish the connection.
If you want to, you can disable this
function. To do that, go into the phone
menu and select the Bluetooth option and then Linked equipment; select the system name, Options and
then Def. as authorised.

It is also possible to activate the

confidential mode directly from the
telephone set: see telephone set manual.

11

IMPORTANT You can select the

required hands-free kit system settings
from the accessories menu.

Dual call:

Communicating

press keypad button A-fig. 1 once

to communicate with new caller;

Answering a call:

press button A-fig. 1 once again to

return to your first caller;

press button A-fig. 1 on the keypad.

Refusing a call:
press button B-fig. 1 on the keypad.
To redial last number called:
press button A-fig. 1 on the keypad and keep it pressed up to redialling
of the number.

press keypad button B-fig. 1 to

refuse the new call;

press button B-fig. 1 once to end

the communication.
Conversation in confidential
mode
Press button A-fig. 1 briefly to
switch the conversation to hands-free
or handset mode.
It is also possible to activate the
confidential mode directly from the
telephone set: see telephone set manual.
Auto answer
From your phone, display the Main
menu and select Tools.
Then select:
Settings for Nokia 3650, 6600
and Siemens SX1 telephones;

12

Tools for Nokia N-GAGE telephones.

Select in sequence Settings, Accessories and Handsfree.
Select in sequence Automatic answer, Options, Change, On
and confirm with OK.
Adjusting the volume
Use the keys of the handset to adjust
the volume of the conversation.
Clearing the memory
Press and hold pressed simultaneously both buttons A-fig. 1 and B-fig.
1 on the keypad.
IMPORTANT Clearing the memory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

TROUBLESHOOTING
PROBLEM
The system is not working
The system says that the Bluetooth wireless
technology is not detected
Your telephone does not detect the hands-free kit

Your telephone is not detected

The person you are calling complains of the bad
sound quality during communication
The person you are calling complains of an echo
during communication
You cannot hear the voice of the person
you are calling
No connection after entering
the passcode 1234
Your telephone is detected too slowly
when switched on
When making a call with voice recognition
the system says that the name
you desire is not voice tagged
Dual call failing
Certain phone book entries are not copied
in the system memory
The system does not recognise voice prompts

SOLUTION
Check that the ignition key is turned to MAR
Switch off your telephone and then switch it back on again (if the hands-free kit is not
operating)
Switch off your telephone and then switch it back on again
Check that the connection of the Bluetooth wireless technology of your telephone is
enabled (refer to the manual of your phone, if necessary)
Repeat the connection phase
Make sure that you are speaking clearly and according to microphone direction
Lower the volume on the mobile phone. Also lower the volume of car radio channel
PHONE, if necessary (see Sound System manual)
Adjust the volume on the mobile phone. Also check the volume of car radio channel
PHONE, if necessary (see Sound System manual)
Go back to the main menu and repeat the pairing procedure
Set user priority (refer to paragraph Pairing priority)
Check that the required name is voice tagged
Repeat the name clearly towards the microphone
Check that the Avviso di chiamata (Call waiting) option on your phone is enabled
Check that these entries are present in the phone book and not only in the

SIM card memory

Check that Bluetooth wireless technology, Voice recognition and Wordspotting
options on your phone are enabled

IMPORTANT System checks and repairs, if required, shall only be performed by Fiat Dealership.

13

NOTES

ENGLISH

Fiat Auto S.p.A.

After Sales - Post Vendita - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Print no. 603.46.602 - II/2005 - 1st Edition