Synclok Ball Valve

2 Way Ball Valve Dimensions
2-Way Ball Valves

Sync-Lok SBV series - Three piece, 2-way valves are specially designed and ruggedly
manufactured for use in corrosive & hazardous conditions. Our valves are precision machined
for maximum durability & efficency to provide a high quality, low cost alternative in fluid &
gaseuos control systems to meet the demands of our customers. All valves are alailable in
high-grade stainless steel, carbon steel, brass & monel. End connections are available in M/F
threaded NPT, BSP, BSPT, ISO, DIN and JIS tapered ends.
Features / Benefits
A479-316 Construction-for corrosion resistance
Full or Reduced Bore - for excellent flow
3 Piece Design - for easy installation and maintenance
Anti-blow out, internally loaded stem - for safety
Floating Ball Design - for positive sealing and seat wearout
Low torque 90 actuation w/ stainless steel lever / phenolic handle - for smooth operation
Materials of Construction
Part No.
Size
Orifice
sbv-2-s-02-od
1/8 OD
78
50
sbv-2-s-02-ff
1/8 Female NPT
70
50
sbv-2-s-m04-od
4mm OD
78
50
Sr.
Description
Qty.
Material
BODY
A479-316/B16
sbv-2-s-04-od
1/4 OD
78
50
BALL
A479-316
sbv-2-s-04-ff
1/4 Female NPT
70
50
SEAL
PTFE / POM
sbv-2-s-m06-od
6mm OD
78
50
O RING
VITON / BUNA-N
sbv-2-s-05-od
5/16 OD
78
50
ADAPTERS
A479-316/B16
sbv-2-s-m08-od
8mm OD
78
50
SPINDLE
A479-316
O RING
VITON / BUNA-N
sbv-2-s-06-od
3/8 OD
85
50
HANDLE
PHENOLIC / SS LEVER
sbv-2-s-06-ff
3/8 Female NPT
72
50
LOCK PIN
A479-316
sbv-2-s-m10-od
10mm OD
85
50
10
GLAND NUT
A479-316/B16
sbv-2-s-08-od
1/2 OD
102
60
10
11
PANEL NUT
A479-316/B16
sbv-2-s-08-ff
1/2 Female NPT
85
60
10
12
NUT
A479-316/B16
sbv-2-s-m12-od
12mm OD
102
60
10
13
FERRULE SET
A479-316/B16
sbv-2-s-10-od
5/8 OD
97
63
10
sbv-2-s-m16-od
16mm OD
97
63
10
sbv-2-s-12-od
3/4 OD
115
60
16
sbv-2-s-12-ff
3/4 Female NPT
98
60
16
sbv-2-s-m20-od
20mm OD
115
60
16
sbv-2-s-16-od
1 OD
121
73
19
sbv-2-s-16-ff
1 Female NPT
115
70
19
sbv-2-s-m25-od
25mm OD
121
73
19
Threaded End Connections
Compression Tube End Connections
Pressure / Temperature Ratings

Seal Material
POM
PTFE
Temperature
0 C to 40 C
0 C to 80 C
Pressure Rating
6,000 psi to 10,000 psi
3,000 psi
Flow Coefficiency Cv.

1.0 to 1.6
Testing
Each valve is hydrostatically tested in accordance with MSS-SP-99. This procedure includes testing of the
body cavity. The hydrostatic test is performed with pure water or other liquids of similar or lower viscosity
@ 1.5 times the seat leakage and 1.1 times the maximum working pressure.
Each valve is also tested with Nitrogen Gas @ 1,000 PSI for seat, seal and shell leakage.
Other tests like vibration, temperature and helium are available upon request.
Valves that have not been actuated for a period of time may have a higher initial actuation
torque.
* All dimensions are in millimeters unless otherwise specified. Dimensions are for reference only, subject to change
* 300 Series Ball Valves are also available in angle pattern and 3-way switching model
WARNING: Inadequate care or improper utilization of the product can cause excessive damage to life and property. Sync-Lok products are at your liable use and the behest of the users
responsibility to check and analyze the product in which it is going to be inserted, so that the same functions properly and the relevant product is also very important for all safe guard and
also precautions to be taken before the user puts the product into service
3-Way Ball Valves

Sr.
1
2
3
4
5
6
7
8
9
10
11
Description
BODY
BALL
PACKING
O RING
ADAPTERS
SPINDLE
O RING
PANEL NUT
LOCK PIN
GLAND NUT
HANDLE
Qty.
1
1
2
2
2
1
1
1
1
1
1
Material
AISI 316 SS / CS
AISI 316 SS / CS
PTFE / POM
VITON / BUNA-N
AISI 316 SS / CS
AISI 316 SS / CS
VITON / BUNA-N
AISI 316 SS / CS
AISI 316 SS / CS
AISI 316 SS / CS
NYLON
Features:
SS 316 construction for corrosion resistance
Full or reduced bore for excellent flow
Flexible 3-piece design
Anti blow-out, internally loaded stem for safety
90 smooth action operation
PTFE/POM seats for ease of use and minimum maintanence
Pressure rating 6,000 psi
Material Options:
SS 316, Carbon Steel, Bronze, Hastalloy, Monel
Optional Kel-F, Polyaman & Peek packing available in high pressure valves
End Connections:
1/4 to 1 NPT, BSP, Male or Femalethreaded or 1/4, 3/8, 1/2 Sync-Lok single or twin ferrule
tube fitting ends
Tests:
Each valve is tested with Nitrogen @ 1,000 psi for seat & seal leakage with a leakage rate of 0.1
sec/min
Hydro tests performed with pure water @ 1.5 litres of the working pressure
All valves are 100% factory tested and complete traceability is available upon request
Valves can be supplied to meet current revision of NACE MR01-75 (Sour Gas Service)
Sync-Lok Locations
407 Newburg Avenue
Catonsville, MD 21228
410-869-3480 - Phone
410-869-3482 - Fax
[email protected] - E-Mail
6 Janice Street
Stanhope, NJ 07874
973-810-2773 - Phone
973-810-2774 - Fax

Synclok Ball Valve

Uploaded by

Copyright:

Available Formats

Synclok Ball Valve

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Synclok Ball Valve

Uploaded by

Copyright:

Available Formats

2 Way Ball Valve Dimensions

2-Way Ball Valves

1/8 Female NPT

1/4 Female NPT

3/8 Female NPT

1/2 Female NPT

3/4 Female NPT

Threaded End Connections

Compression Tube End Connections

Pressure / Temperature Ratings

Flow Coefficiency Cv.

3-Way Ball Valves

You might also like