QuickVPN An OL-25680

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Application Note

Easy and Secure Remote Access with Cisco QuickVPN


With the widespread use of mobile technology and an increased reliability of wireless networks, more businesses can
separate work from place. It is now easy to connect from anywhere. The telecommuter can check email and back
up files, whether working from home or attending the kids soccer practice. The salesperson can retrieve the latest
presentations and submit updated proposals, whether staffing a trade show booth or visiting a customer site. The
business traveler can remain productive, whether sitting in a hotel room or waiting at an airport. As more small
businesses retain contractors to reduce overhead, they must extend secure connectivity beyond the walls of the
office.
To achieve these goals and protect your network, you need an encrypted Virtual Private Network (VPN). A VPN is a
communications tunnel between a remote workers computer and your network. Encryption and authentication
features prevent unauthorized entry and keep communications secure. The benefits are clear, but setting up a VPN
can be daunting because of confusing technical terminology and numerous configuration options. Cisco QuickVPN
provides an easy way to ensure secure remote access. As shown below, with Cisco QuickVPN installed on a
computer and a few simple settings configured on the router, an off-site user can securely access network resources
from anyplace with an Internet connection.

Key Benefits
Cisco QuickVPN provides a cost-effective and simple way to set up a VPN.

Free software. Cisco QuickVPN is available free of charge from Cisco.com.

Easy installation & setup. Your employees easily can install the QuickVPN client themselves. Optionally, you
can generate certificates that they can install for extra protection.

Simple management. Theres no need to configure VPN policies on the router. Typically the only requirement is
to create the user accounts. Some router models may require that you enable a remote access port.

2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 1 of 5

Application Note

Requirements
Cisco QuickVPN requires Windows computers, a compatible router, and Windows Firewall. For best performance,
ensure that the router and the users computers have the latest software at all times. Details are listed below.

A Windows operating system. Users can have Windows 7 (32-bit and 64-bit editions), Windows XP (32-bit), and
WIndows Vista (32-bit and 64-bit editions). QuickVPN is not available for the Mac.

A compatible router. Cisco QuickVPN is compatible with the following Cisco Small Business routers:

RV110W Wireless-N VPN Firewall


RV120W Wireless-N VPN Firewall
RV220W Wireless Network Security Firewall
RV016 16-port 10/100 VPN Router - Multi WAN
RV042 4-port 10/100 VPN Router - Dual WAN
RV082 8-port 10/100 VPN Router - Dual WAN
RVS4000 4-port Gigabit Security Router - VPN
SA520 Security Appliance
SA520W Security Appliance
SA540 Security Appliance
WRV200 Wireless-G VPN Router - RangeBooster
WRV210 Wireless-G VPN Router - RangeBooster
WRVS4400N Wireless-N Gigabit Security Router - VPN V2.0
WRVS4400N Wireless-N Gigabit Security Router - VPN V1.0 & V1.1
Note: To avoid address conflicts between the LAN settings of your router and VPN users routers, do not
configure your LAN with a common IP address range such as 192.168.1.x.

Administrative rights on the PC. The user must have administrative rights to use the Cisco QuickVPN software.

Windows Firewall. Because of the way that Windows handles IPsec service, Windows Firewall must be enabled
for QuickVPN to function properly. The user must uninstall third-party firewall software that conflicts with or
disables Windows Firewall.
Note: As a best practice, users should enable Windows Firewall (via the Control Panel) even if the network has a
router firewall. Doing so helps to block viruses from other computers on the LAN.

Cisco also recommends the following best practices:

Cisco QuickVPN updates. Install the latest software when setting up users computers. As a best practice,
ensure that users install Cisco QuickVPN updates as they become available.

Windows updates. As a best practice, enable Windows Automatic Updates to ensure that the computer is
updated with critical patches from Microsoft.
Note: For users with Windows XP, be aware of known issues with Service Pack 2. Install either Service Pack 3
(see http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE081E1555D4F3D4&displaylang=en) or a special patch that Microsoft has issued (see
http://support.microsoft.com/kb/889527/en-us).

2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 2 of 5

Application Note

Limitations
Cisco QuickVPN is a good choice if you want to set up a secure VPN easily and quickly. However, you may have
additional requirements that would be better suited to another VPN solution. Consider the following points:

Cisco QuickVPN does not allow customization of settings. Because it is designed for quick and easy setup,
this solution does not offer the ability to specify the authentication and encryption settings.

Cisco QuickVPN is not a site-to-site solution. Cisco QuickVPN is specifically designed to allow remote users to
access resources on your network. It does not allow users at the main site to access resources at a remote site.

Cisco QuickVPN does not allow the use of network names. At your site, users may be accustomed to
accessing printers and other devices by using their assigned host names or by browsing the Windows Network
Neighborhood. However, NetBIOS, the program that makes this possible, is not available via Cisco QuickVPN.
You will need to provide your QuickVPN users with the IP addresses of the resources that they can access
remotely.

Note: If Cisco QuickVPN does not suit your requirements, most Cisco Small Business routers support other VPN
options such as IPsec and SSL VPN. Many models include a VPN setup wizard that simplifies the process of setting
up the VPN policies. After using the wizard, you can use the web-based configuration utility to customize the settings
for your business. For more information, refer to the documentation for your Cisco Small Business router.

Appendix A: How-To Information


HowtoSetUpYourRouterforQuickVPN
Typically the only requirement is to create the user accounts. Some router models may require the extra step of
enabling a remote access port. For details, refer to the routers administration guide.

HowtoInstallQuickVPNonaPC
1. GetthesoftwarefromCisco.com:
a. Gotowww.cisco.com/go/software.
b. EntertheroutersmodelnumberinthesearchboxandthenclickFind.
c. Inthelistoflinks,clickQuickVirtualPrivateNetwork(QVPN)Utility.
d. Followtheonscreeninstructionstodownloadthesoftware.SaveitonyourPC.
2. ExtracttheZipfile,andthendoubleclickSetup.exetoinstallthesoftware.

HowtoUseCiscoQuickVPN
1.

Double-click the Cisco QuickVPN software icon on your Desktop or System Tray, or go to Start > Programs
> Cisco Small Business > QuickVPN Client.

2.

Enter a new Profile Name or select a saved profile from the drop-down list. When creating a new profile,
enter the following information:

User Name: Enter the username provided by the administrator.

Password: Enter your password.


Note: The administrator will provide the password. After you connect, you can change your
password, if allowed by the administrator.

2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 3 of 5

Application Note

Server Address: Enter the IP address or domain name of the RV220W.


Port for QuickVPN: Enter the port number specified by the administrator, or keep the default setting,
Auto.

Use Remote DNS Server: Check this box to use the server to resolve domain names, or uncheck
this box to use your local network settings.

3.

To save this profile for future use, click Save.

4.

To begin your Cisco QuickVPN connection, click Connect. The connections progress is displayed:
Connecting, Provisioning, Activating Policy, and Verifying Network.

5.

After your QuickVPN connection is established, the Cisco QuickVPN tray icon turns green, and the Cisco
QuickVPN Status window appears. The window displays the IP address of the remote end of the VPN
tunnel, the time and date the VPN tunnel began, and the total length of time the VPN tunnel has been active.

The status window appears. You can now access network resources by using their IP addresses.

6.

To terminate the VPN tunnel, click Disconnect.


If allowed by the administrator, you can click Change Password to update your password. For information,
click Help.

2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 4 of 5

Application Note

Where to Go From Here


Support
Cisco Small Business Support

www.cisco.com/go/smallbizsupport

Community
Cisco Small Business Support and

www.cisco.com/go/smallbizhelp

Resources
Downloads and Documentation
Firmware

www.cisco.com/go/software
(Enter the model number to search. Then
choose to download the router firmware or
Cisco QuickVPN.)

Cisco Small Business Routers

www.cisco.com/go/smallbizrouters

Documentation

(See the Technical Documentation links.)

Cisco Small Business


Cisco Partner Central for Small Business

www.cisco.com/web/partners/sell/smb

(Partner Login Required)


Cisco Small Business Home

www.cisco.com/smb

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at
www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1005R)
2011 Cisco Systems, Inc. All rights reserved.
OL-25680-01

2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 5 of 5

You might also like