2014 IC Sec 13 Limit Switches

Limit Switches
andSwitches
Safety
Position
and Safety
Introduction
Introduction
Overview
3SE5 23.,
3SE5 21.
3SF1 2.4
3SE5 24.,
3SF1 244
3SE5 13.,
3SE5 11.,
3SF1 114
3SE5 12.,
3SE5 16.
3SF1 124
Position switches, standard

Enclosure
Plastic
Metal
Dimensions (W x H x D) in mm
Degree of protection
12
Standards
IEC 60947-5-1
Approvals
Contact blocks
2 slow-action contacts
2 snap-action contacts
Short stroke
With 2 2 mm contact gap
With make-before-break
2 x (2 or 3 contacts)
Special features
LED status display
Increased corrosion protection
Explosion protection (ATEX)
ASIsafe integrated
Electrical specifications
Insulation voltage Ui
Conventional thermal current Ithe
Connections
Cable entry
M12 connector socket,
4-, 5- or 8-pole
Connector socket, 6-pole + PE
Actuators
Rounded plungers and roller plungers
Roller and angular roller levers
Spring rod
Twist levers and rod actuators
Fork lever
Hinge switches
40 78 38
IP66/IP67
3SE5 132,
3SE5 112,
3SF1 1.4
Safety hinge switches
50 53 33
IP66/IP67
3SE5 232,
3SE5 212,
3SF1 2.4
31 68 33
IP65,
IP66/IP67
Mounting and Operating
operating
points acc. to
points acc. to EN 50047
EN 50047
CE, UL, CSA, CCC
56 78 38
IP66/IP67
56 100 38 31 68 33 40 78 38
IP66/IP67
IP65,
IP66/IP67
IP66/IP67
Mounting and Operating
Operating
Mounting and Mounting and
operating
points acc. to points acc. to operating
operating
EN 50047
points acc. to points acc. to
EN 50041
EN 50047
EN 50041
CE, UL, CSA, CCC
CE, UL, CSA, CCC
1 NO + 1 NC, 2 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC, 2 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 1 NC, 2 NC
1 NO + 1 NC
1 NO + 2 NC, 2 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
400 V
6 A/10 A (3-/2-pole)
400 V
6 A/10 A (3-/2-pole)
400 V
6 A/10 A (3-/2-pole)
1 M20 1.5 2 M20 1.5 1 M20 1.5 3 M20 1.5 1 M20 1.5 1 M20 1.5 1 M20 1.5
Page
Complete units
13/10, 13/27 13/19
13/15, 13/31 13/35
13/39
13/102
Modular system
13/13, 13/29 13/21
13/17, 13/33 13/37
13/40

Ambient temperature 40 C
13/23, 13/42 13/23
13/26, 13/43 13/43
13/43

ASIsafe
on-line
on-line
on-line
on-line

on-line
ATEX
on-line
on-line
on-line
on-line
on-line
on-line
13/103
on-line
on-line
Available
Not available
13/4
12/2
Siemens IC 10 2012
Siemens Industry, Inc.

Industrial Controls Catalog
Position and Safety Switches

Limit Switches and Safety
Introduction
Introduction
3SE5 413,
3SE5 423
Enclosure
Plastic
Metal
Dimensions (W x H x D) in mm
Compact
design
3SE5 250
Open-type
3SE5 232,
3SE5 242,
3SF1 2.4
3SE5 112,
3SE5 122,
3SF1 1.4
Safety switches with

separate actuator
3SE5 322,
3SE5 312,
3SF1 3.4
3SE63
Safety switches with

solenoid interlocking
RFID safety
switch
30 .. ..,
40 .. ..
IP66/IP67
30 48.5 20 31 68 33,
50 53 33
IP10 or IP20
IP65,
IP66/IP67
Mounting and Mounting
operating
acc. to
EN 50047
40 78 38, 54 185 44
56 78 38
IP66/IP67
IP66/IP67
25 91 22
IP69K
Approvals
Contact blocks
Short stroke
With 2 2 mm contact gap
With make-before-break
Special features
LED status display
Increased corrosion protection
Explosion protection (ATEX)
ASIsafe integrated
Insulation voltage Ui
Conventional thermal current Ithe
Connections
Cable entry
CE, UL, CSA
CE, TV, UL, CSA, CCC
CE, TV, UL, CSA, CCC
Category 4
acc. to ISO 13849-1,
PL e acc. to
ISO 13849-1,
SIL 3 acc. to
IEC 61508
CE, TV
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
2 (1 NO + 2 NC)
400 V
10 A
400 V
6A
400 V
6A
400 V
6A
1 M20 1.5, 1 M20 1.5, 3 M20 1.5

2 M20 1.5 3 M20 1.5
M12 connector socket,

4-, 5- or 8-pole
Molded cables
AS-Interface
Actuators
Plungers, twist levers
Separate actuators
Page
Complete units
Modular system
ASIsafe
ATEX

13/46

13/47

Mounting
acc. to
EN 50041
EN 1088
12
Standards
IEC 60947-5-1

13/82

on-line
on-line

13/85

on-line
on-line

13/95

on-line

13/110
Available
Not available

Siemens IC 10 2012
13/5
12/3
Limit Switches
SIRIUS 3SE5 International Limit Switches

General Data
Overview
Position switches in the innovative SIRIUS 3SE5 series are modern in design, compact, modular and simple to connect.
Design
Enclosure sizes
Complete units
All enclosure versions have an integrated chlorinated rubber

diaphragm for high functional safety in cold and aggressive
environments.
Popular versions of the position switches in standard enclosures

are available as complete units.
The 3SE5 switches are available in five different enclosure sizes

with 2 or 3 contacts and with the XL enclosure:
Position switches with plastic and metal enclosures
Modular system
The 3SE5 series features a new modular system comprising different sizes of the basic switch and an actuator which must be
ordered separately. Thanks to the modular construction of the
switch the user can select the right solution for his application
from numerous versions and install it himself in a very short time.
The short delivery times of the modules enable fast replacement
and thus ensure high plant availability.
Open-type position switch IP20 or IP10

Plastic enclosures according to EN 50047 (31 mm wide),
IP65, 1 cable entry
Plastic enclosures (50 mm wide), IP66/IP67, 2 cable entries
Metal enclosures according to EN 50047, (31 mm wide),
IP66/IP67, 1 cable entry
Plastic and metal enclosures according to EN 50041 (40 mm
wide), IP66/IP67, 1 cable entry
Metal enclosures (56 mm wide), IP66/IP67, 3 cable entries
XL metal enclosures with 4 to 6 contacts, 56 mm wide, IP66/
IP67, 3 cable entriesEnclosure versions
Various basic switches can be selected for the 3SE5 series:
With contact blocks with two or three contacts (screw terminals) designed as slow-action or snap-action contacts; the
slow-action contacts also make-before-break
Optional LED status display
With mounted four or five-pole M12 connector socket
(available for the wide enclosures as an accessory for selfassembly)
With 6-pole connector socket + PE on the metal enclosures
With increased corrosion protection
Versions for operating temperature to -40 C
Metal enclosures for explosion protection (ATEX)
AS-Interface version with integrated ASIsafe electronics for
all enclosure designs
Actuator variants
All operating mechanisms can be rotate around the axis in increments of 22.5. The following actuator variants are available:
Standard, rounded and roller plungers

Spring rods
Fork levers with twist actuator
The actuator rollers are available with various materials and

diameters.
Examples of selection options in the modular system
Twist actuators for twist levers and rod actuators,

with setting of switching to right, left or right/left
(standard for all twist actuators except version for fork levers)
13/6

Limit Switches

General Data
Optional LED indicators
Mounting
LED indicators available for all enclosure sizes
Easy plug-in method for fast replacement of the actuator head
The enclosure versions can be supplied with an LED signaling

indicator (1 green + 1 yellow). This is the first time that optical signaling equipment is also available for small standard enclosures according to EN 50047. The LED signaling indicators
are available in all common voltages (24 V DC and 230 V AC).
(1) Open cover

(2) Actuate locking lever
(3) Replace the head (turnable by 16 x 22.5)
(4) Lock and close the cover
Additional contacts
Fast connection method
Exchangeable two and three-pole switching blocks for all enclosure sizes
For plastic enclosure with a width of 31 mm
The three-pole switching block (2 NC, 1 NO) in snap-action

and slow-action is regularly available for all enclosure forms. It
offers more switching through redundant shutdowns (2 NC contacts) with simultaneous signaling (1 NO contact). The same installation space is required as for a two-pole switching block.
These position switches can be wired quickly and easily as an

added customer benefit. The connecting cable is first connected to the terminals of the contact block and then guided
through a slit into the cable gland opening. The time saved
through this new connection method is approx. 20 to 25 %.
Contact reliability
The new contact blocks ensure an extremely high contact stability. This applies even when the devices are switching low voltages and currents, e. g. 1 mA at 5 V DC.
Positive opening q
The NC contacts of the switch are forced open mechanically,
positively-driven and reliably by the plunger. This is referred to
as "positive opening".

13/7
Limit Switches
SIRIUS
3SE5 Mechanical Position Switches

General
General Data
data
Safety position switches
Benefits
The 3SE5 position switches differ from the previous series

through the following new characteristics:
The modular design of the product range allows a number of
versions with a smaller number of bearing types for enclosures and operating mechanisms.
All actuators can be turned around the axis in increments of
22.5 (see picture on page 13/6).
Rounded and roller plungers according to EN 50041 with 3
mm overtravel (total travel 9mm) for greater tolerance when
switching
All enclosure sizes now also including the small enclosure
31 mm wide are optionally available with an LED signaling
indicator (see picture on page 13/7).
All enclosure versions have an integrated chlorinated rubber
diaphragm (high functional safety in cold and aggressive
environments).
All contact blocks are replaceable (see page 13/49).
The three-pole contact blocks are available for all enclosure
sizes (see picture on page 13/7).
Elements with 1NO + 2NC slow-action contacts with makebefore-break and 2NO + 1NC
The short-stroke contact block 1NO + 1NC improves the
precision of the switching operation through a reduced actuation path.
The contact block with 1NO + 1NC snap-action contacts
with 2x2mm contact opening is suitable for simultaneous disconnection and signaling, particularly in the elevator
industry
NEW: XL enclosures for accommodating two 2- or 3-pole
contact blocks
The plastic enclosure with a width of 31mm has simple and
fast wiring equipment which makes it possible to save from
approx. 20 to 25 % of the time when connecting (see picture
on page 13/7).
12
The ASIsafe electric component is integrated for the versions

with the AS-Interface connection (see on-line); an additional
adapter is not required.
For controls according to IEC 60204-1 or EN 60204-1 the devices can be used as a safety position switch. To secure position
switches against changes in their position, keyed techniques
must be employed on installation.
Safety circuits
IEC 60947-5-1 and EN 60947-5-1 require positive opening of the
NC contacts, i.e. for the purposes of personal safety, the assured
opening of NC contacts is expressly stipulated for the electrical
equipment of machines in all safety circuits and marked according to the IEC standard 60947-5-1 with the symbol q .
Category 2 according to ISO 13849-1 (EN 954-1) can be attained with 3SE5 position switches with q , and category 3 or 4
when using an additional position switch, if the corresponding
failsafe evaluation units are selected and correctly installed,
e.g. the 3TK28 safety relays or matching devices from the
ASIsafe, SIMATIC or SINUMERIK product ranges. The operating
mechanisms (actuators) must also be connected to the enclosure by keyed techniques. The corresponding operating mechanisms are marked in the catalog with q .
Contacts for each application
Snap-action contacts: NC and NO contacts switch simultaneously regardless of the actuating speed (vmin = 0.01 m/s)
and contact erosion.
Slow-action contacts: Difference in travel between
"NC contact opens" and "NO contact closes"; the switching
speed is the same as or proportional to the actuating speed
(vmin = 0.4 m/s).
Slow-action contacts with make-before-break: e.g. suitable for
adding a second function to a sequence control.
Operating mechanisms for each application
Standard, rounded and roller plungers
Operation in direction of the plunger axis or in case of roller
plunger with bar at right angles to the plunger axis
The roller plunger is recommended for lateral actuation and
relatively long overtravel.
Application

For actuators made of finely ground steel in the form of cams,
straight-edges (approach angle 30) or cam disks
With the standard position switches, mechanical positions of

moved machine parts are converted into electrical signals.
Through their modular and uniform design and large number of
versions, the devices can meet practically all requirements in industry.
Spring rod
Can be used for undefined actuations and changing starting
conditions
Starting from any direction is possible
Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. And many different actuator versions are available to
match the mechanical configuration of the moved machined
parts. Dimensions, fixing points and characteristics are largely in
accordance with the EN 50041 or EN 50047 standards.

For a high starting speed (v = 1.5 m/s)
Variety of starting options
Insensitive to oil, grinding dust and coarse-grained material
Adjustment of the lever in increments of 10.
Can be adjusted with left or right switching
The devices are suitable for use in any climate.

Standards
IEC 60947-5-1 or EN 60947-5-1.
Fork lever
Switchable in two directions
Latching actuator
For reciprocating movements
The protective measure of "total insulation" by the molded-plastic

enclosure is guaranteed by the use of molded-plastic screwglands.
13/8
12/6
Siemens IC 10 2012

Limit Switches

General Data
Options
On the following pages you will find selection tables for complete
units as well as components of the modular system.
Version with M12 connector socket or 6-pole + PE

Version with M12 connector socket and with 2 LEDs
For the plastic enclosures with a width of 31 and 50 mm the basic switches are designed as complete units with rounded
plunger (according to standard).
Complete units
Modular system
Online configurator
The difference between units is indicated in the selection and ordering data by gray backgrounds.
Using the modular system you can assemble switch variants
which are not available as complete units. Each complete unit
can also be supplied as a module.
A basic switch for the modular system comprises an enclosure
with a contact block and a cover. Among the basic switches the
following versions, for example, can be selected:
Basic enclosure with teflon plunger
Version with increased corrosion protection
Version with 2 LEDs
The online configurator helps you not only to select and order the
right position switch but also to create complete product documentation.
Product data sheets
Dimensional drawings
Operating travel diagrams
CAD data in 2D and 3D model images
Ordering data
Product photos
www.siemens.com/sirius/configurators
Complete units
To be ordered:
Ordering example
Required:
Position switch according to EN 50047 in a plastic enclosure
Contact block with slow-action contacts 1 NO + 1 NC
Angular roller lever, metal lever and plastic roller
Version
Complete units
Order No.
Complete units Enclosure width 31 mm

Angular roller levers
With metal lever and
plastic roller 13 mm
Slow-action contacts
1 NO + 1 NC
3SE5 232-0BF10
Modular system
Ordering example 1
Ordering example 2
Required:
Angular roller lever, metal lever and plastic roller
Required:
Twist lever, high-grade steel lever and plastic roller
To be ordered separately:
To be ordered separately:
Version
Modular system
Version
Order No.
Basic switches Enclosure width 31 mm

With teflon plunger
1 NO + 1 NC
Operating mechanisms

Metal lever,
plastic roller
Order No.

With teflon plunger
3SE5 232-0BC05
+
3SE5 000-0AF10
1 NO + 1 NC
Twist actuators
3SE5 232-0BC05
+
Twist actuators
Twist levers
High-grade steel lever,
plastic roller

Modular system
3SE5 000-0AK00
3SE5 000-0AA31
13/9
Limit Switches
SIRIUS 3SE5 Mechanical Position Switches

3SE5, plastic enclosures
Enclosure width 31 mm acc. to EN 50047

Selection and ordering data

Complete units
2 or 3 contacts Degree of protection IP65 Cable entry M20 1.51)
Contacts
DT Complete units
LEDs
Configurator
Order No.
Rounded
plungers
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
Snap-action contacts, integrated3)
1 NO + 1 NC
Snap-action contacts
Short stroke, integrated3)
1 NO + 1 NC
3SE5 232-0FC05
1 unit
2 2 mm contact gap
1 NO + 1 NC
3SE5 232-0GC05
1 unit
1 NO + 2 NC
3SE5 232-0KC05
1 unit
1 NO + 2 NC
1 unit
Slow-action contacts with makebefore-break
1 NO + 2 NC
3SE5 232-0MC05
1 unit
2 NO + 1 NC
3SE5 232-0PC05
1 unit
3SE5 232-0BC05-1CA0
1 unit
1 unit
1 unit
1 unit
3SE5 232-0CC05
3SE5 232-0HC05
3SE5 232-0LC05
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 232-0PC05-1CA0
1 unit
3SE5 234-0BC05-1AC4
1 unit
1 unit
1 unit
With M12 connector socket, 4-pole (250 V, 4 A)
3SE5 232-0CC05-1CA0
3SE5 232-0KC05-1CA0
3SE5 232-0LC05-1CA0
1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 234-0LC05-1AE0
1 unit
3SE5 232-1KC05
1 unit
1 unit
1 unit
With 2 LEDs, yellow/green
With 2 LEDs
3SE5 232-0BC05
With increased
corrosion
protection
PS*
Price per
PU
Complete units2) Enclosure width 31 mm

Rounded plungers, type B, acc. to EN 50047
With teflon plunger
PU
(UNIT,
SET, M)
3SE5 234-0HC05-1AC4
3SE5 234-0KC05-1AE0
1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 232-3LC05
1 unit
3SE5 234-1BC05-1AF3
1 unit
1 unit

and 2 LEDs
1 NO + 1 NC
24 V DC
1 NO + 1 NC
24 V DC
3SE5 232-1LC05
3SE5 232-3KC05
3SE5 234-1CC05-1AF3
For online configurator see www.siemens.com/sirius/configurators .

q Positive opening according to IEC 60947-5-1, Appendix K.
1) A cable gland with seal must be used with the quick-connect method.
2) Popular versions.
3) Subsequent replacement of contact blocks is not possible.
13/10
* You can order this quantity or a multiple thereof.
Illustrations are approximate
12
Version

Product Category: POSW
Siemens IC 10 2012
12/13
Limit Switches

Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Roller plunger
PS*
Price per
PU

Roller plungers, type C acc. to EN 50047
With plastic roller 10 mm
PU
(UNIT,
SET, M)
3SE5 232-0BD03
1 NO + 1 NC
1 unit
Integrated3)
1 NO + 1 NC
3SE5 232-0HD03
1 unit
1 NO + 1 NC
3SE5 232-0FD03
1 unit
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0KD03
1 NO + 2 NC
1 unit
3SE5 232-0LD03
1 unit
3SE5 232-0LD03-1AH0
1 unit
3SE5 234-0HD03-1AC4
1 unit
3SE5 232-0HD10
Actuator head rotated by 90


1 NO + 1 NC
Roller plungers with central fixing

1 NO + 1 NC
1 unit
1 NO + 2 NC
3SE5 232-0KD10
1 unit
3SE5 232-0BE10
1 unit
1 unit
1 unit
Roller plunger
with central fixing
Roller levers, type E acc. to EN 50047
With metal lever and plastic roller 13 mm
Roller lever
1 NO + 1 NC
1 NO + 1 NC
3SE5 232-0HE10
1 NO + 2 NC
A
B
1 NO + 2 NC
3SE5 232-0LE10
1 unit
3SE5 234-0HE10-1AC4
1 unit
3SE5 232-0BF10
1 unit
1 unit
1 unit
1 unit

1 NO + 1 NC
12

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0KE10
3SE5 232-0HF10
3SE5 232-0KF10
3SE5 232-0LF10
Angular roller
lever
1)
A cable gland with seal must be used with the quick-connect method.
Popular versions.
2)

12/14
Siemens IC 10 2012
13/11
Limit Switches



Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU
2)

Spring rods
Length 142.5 mm, with plastic plunger 50 mm

1 NO + 1 NC
3SE5 232-0HR01
1 unit
3SE5 234-0HR01-1AC4
1 unit
3SE5 232-0BK21
1 unit
1 unit
1 unit

1 NO + 1 NC
Twist levers, type A acc. to EN 50047
With metal lever 21 mm and plastic roller 19 mm

Spring rod
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0LK21
1 unit
3SE5 234-0HK21-1AC4
1 unit
1 NO + 1 NC
3SE5 232-0HK15
1 unit
1 NO + 1 NC
3SE5 232-0HK60
1 unit
3SE5 232-0BK50
1 unit
1 unit

1 NO + 1 NC

3SE5 232-0HK21
3SE5 232-0KK21
Twist lever
Twist levers, adjustable length
With metal lever with grid hole and


1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 232-0LK50
1 unit
1 NO + 1 NC
3SE5 234-0HK50-1AC4
1 unit
1 NO + 1 NC
3SE5 232-0HK80
1 unit
1 NO + 1 NC
3SE5 232-0HK82
1 unit
3SE5 234-0HK82-1AC4
1 unit
Twist lever,
adjustable length
3SE5 232-0HK50
With plastic rod, length 200 mm

1 NO + 1 NC
Rod actuator
1)
Popular versions.
2)
13/12
Note:
If the device you require is not available as a complete unit,
.
see Modular System, page 13/13.
12
Rod actuators
With aluminum rod, length 200 mm

Siemens IC 10 2012
12/15
Limit Switches

Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
Basic switch
3SE5 232-0BC05
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
3SE5 232-0FC05
1 unit
2 2 mm contact gap
1 NO + 1 NC
3SE5 232-0GC05
1 unit
1 NO + 2 NC
1 unit
1 NO + 2 NC
3SE5 232-0KC05
1 unit
1 NO + 2 NC
3SE5 232-0MC05
1 unit
2 NO + 1 NC
3SE5 232-0PC05
1 unit
3SE5 232-0BC05-1CA0
1 unit
1 unit
1 unit
1 unit
With increased corrosion protection4)
With increased
corrosion
protection
PS*
Price per
PU
Basic switches Enclosure width 31 mm (with rounded plunger2))

With teflon plunger
PU
(UNIT,
SET, M)
3SE5 232-0CC05
3SE5 232-0HC05
3SE5 232-0LC05
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 232-0PC05-1CA0
1 unit
3SE5 234-0BC05-1AC4
1 unit
1 unit
1 unit
3SE5 232-0CC05-1CA0
3SE5 232-0KC05-1CA0
3SE5 232-0LC05-1CA0
1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 234-0LC05-1AE0
1 unit
3SE5 232-1KC05
1 unit
1 unit
1 unit
3SE5 234-0HC05-1AC4
3SE5 234-0KC05-1AE0
With M12 socket

1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 232-3LC05
1 unit
3SE5 234-1BC05-1AF3
1 unit
1 unit
3SE5 232-1LC05
3SE5 232-3KC05
With 2 LEDs
12

and 2 LEDs
1 NO + 1 NC
24 V DC
1 NO + 1 NC
24 V DC
3SE5 234-1CC05-1AF3
With M12 socket

and 2 LEDs
q Positive opening according to IEC 60947-5-1, Appendix K, or
positively driven actuator, necessary in safety circuits.

2) For enclosures with widths of 31mm, the basic switch is a complete unit
with rounded plungers.
4) Use corresponding high-grade steel lever.
Note:
Selection aid see page 13/9.
1)

12/16
Siemens IC 10 2012
13/13
Limit Switches

Version

Diameter
DT Modular system
Order No.
mm
Price per
PU
PU
(UNIT,
SET, M)
PS*
3SE5 000-0AD03
Plastic rollers
10
q }
1 unit
High-grade steel rollers
10
q B
3SE5 000-0AD04
1 unit
Plastic rollers
10
q B
3SE5 000-0AD10
1 unit
10
q B
3SE5 000-0AD11
1 unit
3SE5 000-0AE10
1 unit
1 unit
1 unit
Roller plunger
With central fixing

Roller lever
Metal lever, plastic roller
13
q }
Metal lever, high-grade steel roller
13
q }
High-grade steel lever, plastic roller
13
q B
High-grade steel lever, high-grade steel roller
13
q B
3SE5 000-0AE13
1 unit
3SE5 000-0AF10
1 unit
1 unit
1 unit
Angular roller
lever
3SE5 000-0AE11
3SE5 000-0AE12
13
q }
13
q B
13
q A
13
q B
3SE5 000-0AF13
1 unit
Length 142.5 mm (spring 50 mm, plunger 50 mm)
1 unit
3SE5 000-0AR01
Length 76 mm (spring 23.5 mm, plunger 10 mm)
1 unit
3SE5 000-0AR04
1 unit
3SE5 000-0AR02
1 unit
q }
3SE5 000-0AK00
1 unit
q }
q B
3SE5 000-0AA21
3SE5 000-0AA22
3SE5 000-0AA23
3SE5 000-0AA25
3SE5 000-0AA31
3SE5 000-0AA32
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
19
q B
3SE5 000-0AA24
1 unit
19
19
50
50
19
19
q }
q B
3SE5 000-0AA60
3SE5 000-0AA61
3SE5 000-0AA67
3SE5 000-0AA68
3SE5 000-0AA62
3SE5 000-0AA63
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
19
19
30
50
50
19
19
A
B
B
B
B
B
B
3SE5 000-0AA50
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA57
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA53
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
6
6
6
}
B
}
3SE5 000-0AA80
3SE5 000-0AA81
3SE5 000-0AA82
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AF11
3SE5 000-0AF12
Spring rods
(for switches with snap-action contacts only)
High-grade steel plunger and spring:

Spring rod
Twist actuators
Twist actuators, plastic (without lever)

Switching right and/or left, adjustable
Levers for twist actuators
Twist actuator
Twist lever
Twist levers 21 mm, straight, type A acc. to EN 50047

19
19
Metal lever, roller with ball bearing
19
30
19
19
Twist levers 30 mm, straight1)
Twist levers, adjustable length, with grid hole

Metal lever, rubber roller
Twist lever, adjust- High-grade steel lever, plastic roller
able length
Rod actuator
Rod actuators
Aluminum rod, length 200 mm
Spring rod, length 200 mm
Plastic rod, length 200 mm
3SE5 000-0AR03
q B
q B
q B
q B
q }
q B
q B
q B
12
Plastic plunger and high-grade steel spring:
q Positively driven actuator, necessary in safety circuits.

1)
Can be clinch mounted (turned through 180, rear of lever).

13/14
Siemens IC 10 2012

12/17
Limit Switches


Complete units
2 or 3 contacts Degree of protection IP66/67 Cable entry M20 1.5
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Plain plunger
PS*
1 unit
1 unit
1 unit
1 unit
Price per
PU

Plain plungers
With high-grade steel plunger
PU
(UNIT,
SET, M)
3SE5 132-0BB01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 132-0PB01
1 unit
3SE5 132-0BC03
1 unit
1 unit
1 unit
1 unit
Rounded plungers, type B acc. to EN 50041
With plastic plunger
3SE5 132-0CB01
3SE5 132-0KB01
3SE5 132-0LB01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
Rounded plunger Slow-action contacts
2 NO + 1 NC
3SE5 132-0PC03
1 unit
3SE5 132-0BD05
1 unit
1 unit
1 unit
1 unit
3SE5 132-0CC03
3SE5 132-0KC03
3SE5 132-0LC03
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 132-0PD05
1 unit
3SE5 132-0BE05
1 unit
1 unit
1 unit
1 unit
Roller plunger
3SE5 132-0CD05
3SE5 132-0KD05
3SE5 132-0LD05
Roller levers

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 132-0PE05
1 unit
3SE5 132-0BF05
1 unit
1 unit
3SE5 132-0CE05
3SE5 132-0KE05
3SE5 132-0LE05
Roller lever
12

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 132-0LF05
1 unit
3SE5 132-0CR01
1 unit
1 unit
3SE5 132-0CF05
Angular roller
lever
Spring rods

1 NO + 1 NC
1 NO + 2 NC
3SE5 132-0LR01
Spring rod
1)
Popular versions.

Siemens IC 10 2012
12/18

13/15
Limit Switches


2 or 3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5

Version
Contacts
DT Complete units
LEDs
Configurator
Order No.

PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
Price per
PU
3SE5 132-0BJ01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 132-0PJ01
1 unit
3SE5 132-0CJ60
3SE5 132-0CJ01
3SE5 132-0KJ01
3SE5 132-0LJ01
Twist lever
With metal lever with grid hole and plastic roller 19 mm

1 NO + 1 NC
1 unit
1 NO + 2 NC
3SE5 132-0LJ60
1 unit
3SE5 132-0CJ50
Twist lever, adjustable length, with

grid hole
1 NO + 1 NC
1 unit
1 NO + 2 NC
3SE5 132-0LJ50
1 unit
1 NO + 1 NC
3SE5 132-0CJ80
1 unit
1 NO + 1 NC
3SE5 132-0CJ82
1 unit
Twist lever, adjustable length
Rod actuator
For online configurator see www.siemens.com/sirius/configurators.
1)
Popular versions.
13/16
Note:
12
Rod actuators, type D, acc. to EN 50041

Siemens IC 10 2012
12/19
Limit Switches

Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
1 unit
Price per
PU
With M20 1.5 connecting thread

1 NO + 1 NC
1 NO + 1 NC
Gold-plated contacts
Basic switch
3SE5 132-0CA00
3SE5 132-0CA00-1AC1
3SE5 132-0KA00
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 132-0MA00
1 unit
2 NO + 1 NC
3SE5 132-0PA00
1 unit
3SE5 132-0BA00-1CA0
1 unit
1 unit
1 unit
1 unit
With increased
corrosion
protection
3SE5 132-0BA00
3SE5 132-0LA00
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 132-0MA00-1CA0
1 unit
2 NO + 1 NC
3SE5 132-0PA00-1CA0
1 unit
3SE5 134-0BA00-1AC4
1 unit
1 unit
1 unit
3SE5 132-0CA00-1CA0
3SE5 132-0KA00-1CA0
3SE5 132-0LA00-1CA0
1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 134-0LA00-1AE0
1 unit
3SE5 132-1KA00
1 unit
1 unit
1 unit
1 unit
3SE5 134-0CA00-1AC4
3SE5 134-0KA00-1AE0
With M12 socket

1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 132-1LA00
3SE5 132-3KA00
3SE5 132-3LA00
With 2 LEDs

Use corresponding high-grade steel lever.
12
1)
Note:

12/20
Siemens IC 10 2012
13/17
Limit Switches


Version
DT Modular system
Diameter
Order No.
mm
Price per
PU
PU
(UNIT,
SET, M)
PS*
Plain plungers
High-grade steel plungers
10
q A
3SE5 000-0AB01
1 unit

Plastic plungers
10
q B
3SE5 000-0AC03
1 unit

Plastic plunger, plastic roller
Plastic plunger, high-grade steel roller
13
13
q B
q B
3SE5 000-0AD05
3SE5 000-0AD06
1
1
1 unit
1 unit
Roller levers
Metal lever with plastic roller, plastic base
22
q B
3SE5 000-0AE05
1 unit

22
q B
3SE5 000-0AF05
1 unit
B
B
B
3SE5 000-0AR01
3SE5 000-0AR03
3SE5 000-0AR04
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AR02
1 unit
q B
3SE5 000-0AJ00
1 unit
19
19
19
19
30
50
19
19
19
q }
q B
3SE5 000-0AA01
3SE5 000-0AA02
3SE5 000-0AA03
3SE5 000-0AA04
3SE5 000-0AA05
3SE5 000-0AA08
3SE5 000-0AA11
3SE5 000-0AA12
3SE5 000-0AA15
1
1
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
19
q B
3SE5 000-0AA24
30
q B
3SE5 000-0AA26
1
1
1 unit
1 unit
19
19
50
19
19
q B
q B
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit

3SE5 000-0AA60
3SE5 000-0AA61
3SE5 000-0AA68
3SE5 000-0AA62
3SE5 000-0AA63
19
19
30
50
19
19
A
B
B
B
B
B
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
Rod actuators, type D acc. to EN 50041

3SE5 000-0AA50
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA53
6
6
6
B
B
B
3SE5 000-0AA80
3SE5 000-0AA81
3SE5 000-0AA82
1
1
1
1 unit
1 unit
1 unit
Plain plunger
Plunger
Roller lever
Angular roller
lever
Twist actuators
Twist actuator
Twist lever

For twist levers and rod actuators,
switching right and/or left, adjustable
Twist levers, offset, type A acc. to EN 50041

Metal lever 27 mm, plastic roller
Metal lever 27 mm, high-grade steel roller
Metal lever 27 mm, roller with ball bearing
Metal lever 27 mm, 2 plastic rollers
Metal lever 27 mm, rubber roller
High-grade steel lever 27 mm, plastic roller
High-grade steel lever 27 mm, high-grade steel roller
q }
q B
q }
q B
q }
q B
q }

Twist lever, adjust- Metal lever, plastic roller
able length
Rod actuator

13/18
q B
q B
q B
1)
12
Spring rod
Spring rods (for switches with snap-action contacts only)

7
7
Siemens IC 10 2012

12/21
Limit Switches

Enclosure width 50 mm

Complete units
2 or 3 contacts Degree of protection IP66/IP67 Cable entry 2 (M20 1.5)
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Rounded plunger
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
3SE5 242-0FC05
1 unit
2 2 mm contact gap
1 NO + 1 NC
3SE5 242-0GC05
1 unit
1 NO + 2 NC
3SE5 242-0KC05
1 unit
1 NO + 2 NC
1 unit
1 NO + 2 NC
3SE5 242-0MC05
1 unit
2 NO + 1 NC
3SE5 242-0PC05
1 unit
3SE5 242-0BC05-1CA0
1 unit
1 unit
1 unit
1 unit
3SE5 242-0CC05
3SE5 242-0HC05
3SE5 242-0LC05
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 242-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 242-0PC05-1CA0
1 unit
3SE5 242-1KC05
1 unit
1 unit
1 unit
With 2 LEDs
3SE5 242-0BC05
With increased
corrosion
protection
PS*
Price per
PU

Rounded plungers
With teflon plunger
PU
(UNIT,
SET, M)
3SE5 242-0HC05-1CA0
3SE5 242-0KC05-1CA0
3SE5 242-0LC05-1CA0
1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 242-3LC05
1 unit
3SE5 242-0BD03
1 unit
1 unit
1 unit
3SE5 242-1LC05
3SE5 242-3KC05
Roller plungers

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 242-0HD03
3SE5 242-0LD03
Roller plunger
12

1)
2)
Popular versions.
Subsequent replacement of contact blocks is not possible.

12/22
Siemens IC 10 2012
13/19
Limit Switches



Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Roller lever
PS*
1 unit
1 unit
Price per
PU

Roller levers
PU
(UNIT,
SET, M)
3SE5 242-0BE10
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 242-0LE10
1 unit
3SE5 244-0LE10-1AE0
1 unit
3SE5 242-0BK21
1 unit
1 unit
With M12 connector socket, 4-pole right (250 V, 4 A)

2 NC
Twist levers
3SE5 242-0HE10
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 242-0LK21
1 unit
3SE5 242-0HK50
1 unit
3SE5 242-0HK21
Twist lever

1 NO + 1 NC

1)
Popular versions.
12
2)
Note:
13/20

Siemens IC 10 2012
12/23
Limit Switches

Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
Basic switches
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
3SE5 242-0FC05
1 unit
2 2 mm contact gap
1 NO + 1 NC
3SE5 242-0GC05
1 unit
1 NO + 2 NC
3SE5 242-0KC05
1 unit
1 NO + 2 NC
1 unit
1 NO + 2 NC
3SE5 242-0MC05
1 unit
2 NO + 1 NC
3SE5 242-0PC05
1 unit
3SE5 242-0BC05-1CA0
1 unit
1 unit
1 unit
3SE5 242-0CC05
3SE5 242-0HC05
3SE5 242-0LC05
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 242-0LC05-1CA0
1 unit
1 NO + 2 NC
3SE5 242-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 242-0PC05-1CA0
1 unit
3SE5 242-1KC05
1 unit
1 unit
1 unit
1 unit
PU
(UNIT,
SET, M)
PS*
With 2 LEDs
3SE5 242-0BC05
With increased
corrosion
protection
PS*
Price per
PU

With teflon plunger
PU
(UNIT,
SET, M)
1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC


For enclosures with widths of 50 mm, the basic switch is a complete unit
3SE5 242-0HC05-1CA0
3SE5 242-0KC05-1CA0
3SE5 242-1LC05
3SE5 242-3KC05
3SE5 242-3LC05
Note:
1)
12
Version
DT Modular system
Diameter
Order No.
mm
Price per
PU
3SE5 000-0AD03
Plastic rollers
10
q A
1 unit
10
q B
3SE5 000-0AD04
1 unit
Plastic rollers
10
q B
3SE5 000-0AD10
1 unit
10
q B
1 unit
Roller plungers
3SE5 000-0AD11
With central fixing


12/24
Siemens IC 10 2012
13/21
Limit Switches


Version
DT Modular system
Diameter
Order No.
mm
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
Price per
PU
Roller lever
13
q A
13
q B
13
q B
13
q B
3SE5 000-0AE13
1 unit
3SE5 000-0AF10
1 unit
1 unit
1 unit
Angular roller
lever
3SE5 000-0AE10

3SE5 000-0AE11
3SE5 000-0AE12
13
q A
13
q B
13
q A
13
q B
3SE5 000-0AF13
1 unit
3SE5 000-0AR01
1 unit
1 unit
3SE5 000-0AR04
1 unit
3SE5 000-0AR02
1 unit
q A
3SE5 000-0AK00
1 unit
3SE5 000-0AA21
1 unit
1 unit
1 unit
1 unit
1 unit
3SE5 000-0AF11
3SE5 000-0AF12
Spring rods
(for switches with snap-action contacts only)
Spring rod
Twist actuators

Twist actuator
Twist lever
Twist levers 21 mm, straight, type A acc. to EN 50047

19
q A
19
q B
19
q B
30
q B
19
q B
19
q B
3SE5 000-0AA32
1 unit
19
q B
3SE5 000-0AA24
30
q B
3SE5 000-0AA26
1
1
1 unit
1 unit
19
q B
3SE5 000-0AA60
1 unit
19
q B
1 unit
50
q B
1 unit
50
q B
1 unit
19
q B
1 unit
19
q B
3SE5 000-0AA63
1 unit
3SE5 000-0AA50
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit

Twist lever,
adjustable length Metal lever, rubber roller
Rod actuator
3SE5 000-0AA22
3SE5 000-0AA23
3SE5 000-0AA25
3SE5 000-0AA31
3SE5 000-0AA61
3SE5 000-0AA67
3SE5 000-0AA68
3SE5 000-0AA62
19
19
30
50
50
19
19
3SE5 000-0AA53
1 unit
3SE5 000-0AA80
1 unit
1 unit
1 unit
Rod actuators
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA57
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA81
3SE5 000-0AA82
12
3SE5 000-0AR03

1)
13/22
Siemens IC 10 2012

12/25
Limit Switches

Ambient temperature to 40 C

Complete units
2 or 3 contacts Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.

1 NO + 1 NC
PU
(UNIT,
SET, M)
PS*
PG
Price
per PU
3SE5 232-0CD10-1AJ0
1 unit
41K
3SE5 232-0CK31-1AJ0
1 unit
41K
3SE5 232-0CK62-1AJ0
Roller plunger
with central
fixing
With high-grade steel lever 21 mm and plastic roller 19 mm

1 NO + 1 NC
Twist lever
With high-grade steel lever with grid hole

and plastic roller 19 mm
1 NO + 1 NC
1 unit
41K
1 NO + 2 NC
3SE5 232-0LK62-1AJ0
1 unit
41K
3SE5 242-0HK21-1AJ0
1 unit
41K
3SE5 242-0HK62-1AJ0
1 unit
41K
Twist lever,
adjustable
length

Twist levers
Snap-action contacts, integrated2) 1 NO + 1 NC
12
With high-grade steel lever with grid hole and plastic roller
19 mm
Snap-action contacts, integrated2) 1 NO + 1 NC
Twist lever,
adjustable
length

Popular versions.
1)

12/26
Note:
see Modular System, see page 13/24.
13/23
Siemens IC 10 2012

Limit Switches


Modular system
2 or 3 contacts Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PS*
1 unit
1 unit
Price per
PU

With teflon plunger
PU
(UNIT,
SET, M)
3SE5 232-0CC05-1AJ0
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 232-0LC05-1AJ0
1 unit
3SE5 242-0BC05-1AJ0
1 unit
1 unit
3SE5 232-0KC05-1AJ0
Basic switch

With teflon plunger
1 NO + 1 NC
1 NO + 1 NC
3SE5 242-0HC05-1AJ0
Basic switch

For enclosures with widths of 31 and 50 mm, the basic switch is a complete unit with rounded plungers.
2)
Note:
12
1)
13/24

Siemens IC 10 2012
12/27
Limit Switches


Version
DT Modular system
Diameter
Order No.
mm
PU
(UNIT,
SET, M)
PS*
Price per
PU

10
q B
3SE5 000-0AD03-1AJ0
1 unit
13
q B
3SE5 000-0AE10-1AJ0
1 unit
13
q B
3SE5 000-0AE12-1AJ0
1 unit
13
q B
3SE5 000-0AF10-1AJ0
1 unit
13
q B
3SE5 000-0AF12-1AJ0
1 unit
q B
3SE5 000-0AK00-1AJ0
1 unit
3SE5 000-0AA21-1AJ0
Plastic rollers
Roller plunger
Roller lever
Angular roller
lever
Twist actuators

Twist actuator
Twist levers straight, 21 mm, type A acc. to EN 50047
Twist lever
19
q B
1 unit
19
q B
3SE5 000-0AA31-1AJ0
1 unit
19
q B
3SE5 000-0AA60-1AJ0
1 unit
19
q B
1 unit
3SE5 000-0AA62-1AJ0
Twist lever,
adjustable length
12

12/28
Siemens IC 10 2012
13/25
Limit Switches


Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
PU
(UNIT,
SET, M)
PS*
Price per
PU

1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 132-0CA00-1AJ0
3SE5 132-0KA00-1AJ0
3SE5 132-0LA00-1AJ0
Basic switch
Note:


Version
DT Modular system
Diameter
Order No.
mm
Price per
PU

Plastic plunger
10
q B
3SE5 000-0AC03-1AJ0
1 unit

Plastic plunger, plastic roller
13
q B
3SE5 000-0AD05-1AJ0
1 unit
Roller levers
22
q B
3SE5 000-0AE05-1AJ0
1 unit
q B
3SE5 000-0AJ00-1AJ0
1 unit
3SE5 000-0AA01-1AJ0
Rounded plunger
Roller plunger
Roller lever
Twist actuators

Twist lever, type A acc. to EN 50041

19
q B
1 unit
19
q B
3SE5 000-0AA11-1AJ0
1 unit
19
q B
3SE5 000-0AA60-1AJ0
1 unit
19
q B
1 unit
12
Twist actuator
Twist levers
3SE5 000-0AA62-1AJ0
Twist lever,
adjustable length
13/26

Siemens IC 10 2012
12/29
Limit Switches

3SE5, metal enclosures

Complete units
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
1 unit
1 unit
1 unit
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0MC05
1 unit
2 NO + 1 NC
3SE5 212-0PC05
1 unit
3SE5 212-0BC05-1CA0
1 unit
1 unit
1 unit
1 unit
3SE5 212-0CC05
3SE5 212-0KC05
3SE5 212-0LC05
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 212-0PC05-1CA0
1 unit
3SE5 214-0BC05-1AC5
1 unit
1 unit
1 unit
3SE5 212-0CC05-1CA0
3SE5 212-0KC05-1CA0
3SE5 212-0LC05-1CA0
1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 214-0LC05-1AE1
1 unit
3SE5 212-1KC05
1 unit
1 unit
1 unit
3SE5 214-0CC05-1AC5
3SE5 214-0KC05-1AE1
1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 212-3LC05
1 unit
3SE5 214-1BC05-1AF3

and 2 LEDs
3SE5 212-1LC05
3SE5 212-3KC05
1 NO + 1 NC
24 V DC
1 unit
1 NO + 1 NC
24 V DC
3SE5 214-1CC05-1AF3
1 unit
3SE5 212-0BB01
1 unit
1 unit
1 unit
Plain plungers
12
1 unit
Plain plunger
1 NO + 1 NC
1 NO + 1 NC
With 2 LEDs
3SE5 212-0BC05
Rounded plunger Snap-action contacts
With increased
corrosion
protection
PS*
Price per
PU

Rounded plungers, type B, acc. to EN 50047
With plunger
PU
(UNIT,
SET, M)
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0LB01
1 unit
3SE5 212-0BD03
1 unit
1 unit
1 unit
1 unit
3SE5 212-0CB01
3SE5 212-0KB01

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
Roller plunger
3SE5 212-0CD03
3SE5 212-0KD03
3SE5 212-0LD03

1)
Popular versions.

12/30
13/27
Siemens IC 10 2012

Limit Switches



Version
Contacts
DT Complete units
LEDs
Configurator
Order No.

PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
Price per
PU
3SE5 212-0BE10
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0LE10
1 unit
3SE5 212-0BF10
1 unit
1 unit
1 unit
3SE5 212-0CE10
3SE5 212-0KE10
Roller lever

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0LF10
1 unit
3SE5 212-0BK21
1 unit
1 unit
1 unit
3SE5 212-0CF10
3SE5 212-0KF10
Angular roller
lever

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0LK21
1 unit
3SE5 212-0CK60
1 unit
1 unit
3SE5 212-0CK21
3SE5 212-0KK21
Twist lever
With metal lever with grid hole and

1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0LK60
1 unit
3SE5 212-0BK50
1 unit
1 unit
1 unit

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
Twist lever, adjustSnap-action contacts

able length

Popular versions.
3SE5 212-0CK50
3SE5 212-0LK50
Note:
see Modular System, see page 13/29.
12
1)
3SE5 212-0KK60
13/28

Siemens IC 10 2012
12/31
Limit Switches


Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
Basic switch
3SE5 212-0BC05
1 unit
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0MC05
1 unit
2 NO + 1 NC
3SE5 212-0PC05
1 unit
3SE5 212-0BC05-1CA0
1 unit
1 unit
1 unit
1 unit
3SE5 212-0CC05
3SE5 212-0KC05
3SE5 212-0LC05
With increased
corrosion
protection
PS*
Price per
PU

With plunger
PU
(UNIT,
SET, M)
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0MC05-1CA0
1 unit
2 NO + 1 NC
3SE5 212-0PC05-1CA0
1 unit
3SE5 214-0BC05-1AC5
1 unit
1 unit
1 unit
3SE5 212-0CC05-1CA0
3SE5 212-0KC05-1CA0
3SE5 212-0LC05-1CA0

1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 214-0LC05-1AE1
1 unit
3SE5 212-1KC05
1 unit
1 unit
1 unit
3SE5 214-0CC05-1AC5
3SE5 214-0KC05-1AE1
With M12 socket

1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 212-3LC05
1 unit
3SE5 214-1BC05-1AF3
1 unit
1 unit
3SE5 212-1LC05
3SE5 212-3KC05
With 2 LEDs
and 2 LEDs
1 NO + 1 NC
24 V DC
1 NO + 1 NC
24 V DC
3SE5 214-1CC05-1AF3
12
With M12 socket

and 2 LEDs
Note:


For enclosures with widths of 31mm, the basic switch is a complete unit
1)
Version
DT Modular system
Diameter
Order No.
mm
PU
(UNIT,
Price per SET, M)
PU
PS*
Plain plungers
10
q A
3SE5 000-0AB01
1 unit
Plastic rollers
10
q A
3SE5 000-0AD03
1 unit
10
q B
1 unit

Plain plunger
Roller plunger
3SE5 000-0AD04

Industrial Controls Catalog Siemens IC 10 2012
12/32
13/29

Limit Switches

Version

DT Modular system
Diameter
Order No.
mm
Price per
PU
PU
(UNIT,
SET, M)
PS*
3SE5 000-0AD10
Plastic rollers
10
q B
1 unit
10
q B
3SE5 000-0AD11
1 unit
3SE5 000-0AE10
1 unit
1 unit
1 unit
Roller lever
13
q A
13
q B
13
q B
13
q B
3SE5 000-0AE13
1 unit
3SE5 000-0AF10
1 unit
1 unit
1 unit
Angular roller
lever
Spring rod
Twist actuators
13
q A
13
q B
13
q A
13
q B
3SE5 000-0AF13
1 unit
B
B
B
3SE5 000-0AR01
3SE5 000-0AR03
3SE5 000-0AR04
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AR02
1 unit
q A
3SE5 000-0AK00
1 unit
3SE5 000-0AA21
1 unit
1 unit
1 unit
1 unit
1 unit

7
7
Twist levers
Twist levers, straight, type A acc. to EN 50047
3SE5 000-0AF11
3SE5 000-0AF12
19
q A
19
q B
19
q B
30
q B
19
q B
High-grade steel lever 21 mm, high-grade steel roller 19
q B
3SE5 000-0AA32
1 unit
3SE5 000-0AA22
3SE5 000-0AA23
3SE5 000-0AA25
3SE5 000-0AA31
19
q B
1 unit
30
q B
3SE5 000-0AA24
3SE5 000-0AA26
1 unit
3SE5 000-0AA60
1 unit
1 unit
1 unit
1 unit
1 unit

19
q B
19
q B
50
q B
50
q B
19
q B
19
q B
3SE5 000-0AA63
1 unit
3SE5 000-0AA50
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
Twist lever, adjust- High-grade steel lever, plastic roller

able length
3SE5 000-0AA61
3SE5 000-0AA67
3SE5 000-0AA68
3SE5 000-0AA62
19
19
30
50
50
19
19
3SE5 000-0AA53
1 unit
3SE5 000-0AA80
1 unit
1 unit
1 unit
1 unit

Rod actuator
3SE5 000-0AE12

Twist actuator
3SE5 000-0AE11
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA57
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA81
3SE5 000-0AA82
3SE5 000-0AA83
12
With central fixing

1)
13/30
Siemens IC 10 2012

12/33
Limit Switches


Complete units
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Complete
PS*
1 unit
1 unit
1 unit
Price per
PU
units1)
Plain plungers
Plain plunger
PU
(UNIT,
SET, M)
3SE5 112-0BB01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0LB01
1 unit
3SE5 112-0BC02
1 unit
1 unit
1 unit
3SE5 112-0CB01
3SE5 112-0KB01
With high-grade steel plungers, with 3 mm overtravel

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0LC02
1 unit
3SE5 112-0BD02
1 unit
1 unit
1 unit
3SE5 112-0LD02
1 unit
3SE5 112-0CC02
3SE5 112-0KC02
Rounded plunger
With high-grade steel roller 13 mm, with 3 mm overtravel
Roller plunger
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
24 V DC
3SE5 114-1CD02-1AF3
1 unit
3SE5 112-0BE01
1 unit
1 unit
1 unit
With M12 connector socket, 5-pole (125 V, 4 A) and 2 LEDs

1 NO + 1 NC
Roller levers
3SE5 112-0CD02
3SE5 112-0KD02
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0LE01
1 unit
3SE5 112-0BF01
1 unit
1 unit
3SE5 112-0CE01
3SE5 112-0KE01
Roller lever
12

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 112-0LF01
1 unit
3SE5 112-0CR01
1 unit
3SE5 112-0CF01
Angular roller
lever
Spring rods

1 NO + 1 NC
Spring rod
1)
Popular versions.

Industrial Controls
Catalog Siemens IC 10 2012
12/34
13/31

Limit Switches



Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
1 unit
1 unit
1 unit
3SE5 112-0BH01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0LH01
1 unit
3SE5 114-0CH01-1AC5
1 unit
3SE5 114-1CH01-1AF3
1 unit
3SE5 112-0BH02

Twist lever
PS*
Price per
PU

PU
(UNIT,
SET, M)
1 NO + 1 NC

1 NO + 1 NC
24 V DC
With metal lever 27 mm and high-grade steel roller 19 mm

1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 unit
1 unit
3SE5 114-1CH02-1AF3
1 unit
3SE5 112-0CH24
1 unit
3SE5 112-0BH60
1 unit
1 unit

1 NO + 1 NC
3SE5 112-0KH01
3SE5 112-0CH02

3SE5 112-0CH01

1 NO + 1 NC
1 NO + 1 NC
Twist lever, adjust- Snap-action contacts

able length, with
grid hole
1 NO + 2 NC
3SE5 112-0LH60
1 unit
3SE5 112-0BH50
1 unit
1 unit

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 112-0LH50
1 unit
24 V DC
3SE5 114-1LH50-1AD4
1 unit
3SE5 112-0CH51
1 unit
3SE5 112-0CT11
1 unit

and 2 LEDs
1 NO + 2 NC
With metal lever and high-grade steel roller 19 mm

3SE5 112-0CH60
1 NO + 1 NC
3SE5 112-0CH50
Fork levers, latching
With metal lever and 2 plastic rollers 19 mm

1 NO + 1 NC
12
Fork lever
Rod actuators, type D, acc. to EN 50041

1 NO + 1 NC
3SE5 112-0CH80
1 unit
1 NO + 1 NC
3SE5 112-0CH82
1 unit

Rod actuator
1)
Popular versions.
13/32
Note:
Siemens IC 10 2012
12/35
Limit Switches


Modular system
Version
Contacts
DT Modular system
LEDs
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
1 unit
3SE5 112-0MA00
1 unit
Configurator
Order No.
Price per
PU

1 NO + 1 NC
1 NO + 1 NC
Gold-plated contacts
Basic switch
3SE5 112-0KA00
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 112-0PA00
1 unit
3SE5 112-0BA00-1CA0
1 unit
1 unit
1 unit
1 unit
3SE5 112-0LA00
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0MA00-1CA0
1 unit
2 NO + 1 NC
3SE5 112-0PA00-1CA0
1 unit
3SE5 114-0BA00-1AC5
1 unit
1 unit
1 unit
3SE5 112-0CA00-1CA0
3SE5 112-0KA00-1CA0
3SE5 112-0LA00-1CA0
1 NO + 1 NC
1 NO + 1 NC
2 NC
2 NC
3SE5 114-0LA00-1AE1
1 unit
3SE5 115-0KA00-1AD1
With connector socket, 6-pole + PE (250 V, 10 A)

1 NO + 2 NC
1 NO + 2 NC
1 NO + 1 NC
3SE5 114-0CA00-1AC5
3SE5 114-0KA00-1AE1
1 unit
3SE5 115-0LA00-1AD1
1 unit
3SE5 115-0CA00-1AD0
1 unit
3SE5 112-1KA00
1 unit
1 unit
1 unit

and quick-release device
With plug,
6-pole + PE
3SE5 112-0CA00-1AC1
1 NO + 2 NC
With M12 socket
3SE5 112-0CA00
With increased
corrosion
protection
3SE5 112-0BA00

1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 112-3LA00
1 unit
3SE5 114-1BA00-1AF3
3SE5 112-1LA00
3SE5 112-3KA00
With 2 LEDs
12

and 2 LEDs
1 NO + 1 NC
24 V DC
1 unit
1 NO + 1 NC
24 V DC
3SE5 114-1CA00-1AF3
1 unit
24 V DC
3SE5 114-1LA00-1AD4
1 unit
3SE5 115-1BA00-1AF2
1 unit
1 unit
1 unit

and 2 LEDs
With M12 socket
and 2 LEDs
1 NO + 2 NC
With connector socket, 6-pole + PE (10 A),

and 2 LEDs
1 NO + 1 NC
24 V DC
1 NO + 1 NC
24 V DC
2 NC
24 V DC
3SE5 115-1CA00-1AF2
3SE5 115-1LA00-1AD2
With socket,
6-pole + PE,
and 2 LEDs
1)


Industrial Controls Catalog Siemens IC 10 2012
12/36
Note:
Selection aid, see page 13/9.
13/33

Limit Switches


Version
DT Modular system
Diameter
Order No.
mm
Price per
PU
PU
(UNIT,
SET, M)
PS*
Plunger
Roller lever
Angular roller
lever
Spring
rod
Twist actuators
Twist actuator
Twist levers
Plain plungers
10
q A
3SE5 000-0AB01
1 unit

High-grade steel plungers, with 3 mm overtravel
10
q }
3SE5 000-0AC02
1 unit

High-grade steel roller, with 3 mm overtravel
13
q }
3SE5 000-0AD02
1 unit
Roller levers
22
22
22
22
q }
1
1
1
1
1 unit
1 unit
1 unit
1 unit

3SE5 000-0AE01
3SE5 000-0AE02
3SE5 000-0AE03
3SE5 000-0AE04
22
22
22
22
q }
q B
3SE5 000-0AF01
3SE5 000-0AF02
3SE5 000-0AF03
3SE5 000-0AF04
1
1
1
1
1 unit
1 unit
1 unit
1 unit
B
B
B
3SE5 000-0AR01
3SE5 000-0AR03
3SE5 000-0AR04
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AR02
1 unit
q A
3SE5 000-0AH00
1 unit
q }
3SE5 000-0AT10
1 unit
19
19
19
19
30
50
19
19
19
q A
q B
3SE5 000-0AA01
3SE5 000-0AA02
3SE5 000-0AA03
3SE5 000-0AA04
3SE5 000-0AA05
3SE5 000-0AA08
3SE5 000-0AA11
3SE5 000-0AA12
3SE5 000-0AA15
1
1
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
19
q B
3SE5 000-0AA24
1 unit
19
19
50
19
19
q B
q B
3SE5 000-0AA60
3SE5 000-0AA61
3SE5 000-0AA68
3SE5 000-0AA62
3SE5 000-0AA63
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
19
19
30
50
19
19
A
B
B
B
B
B
3SE5 000-0AA50
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA53
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
q }
q B
3SE5 000-0AT01
3SE5 000-0AT02
3SE5 000-0AT03
1
1
1
1 unit
1 unit
1 unit
B
B
B
3SE5 000-0AA80
3SE5 000-0AA81
3SE5 000-0AA82
1
1
1
1 unit
1 unit
1 unit
q }
q B
q B
q B
q B

7
7
Twist actuators, metal (without lever)
For fork levers, latching
Twist levers, offset, type A acc. to EN 50041

Metal lever 27 mm, 2 plastic rollers
Metal lever 27 mm, rubber roller
High-grade steel lever 27 mm, high-grade steel roller
q A
q B
q B
q B
q B
q B
q B

Twist lever, adjust- Metal lever, plastic roller
able length
Fork lever

q B
q B
q B
Fork levers (for switches with snap-action contacts only)

2 metal levers, 2 plastic rollers
19
2 metal levers, 2 high-grade steel rollers
19
2 high-grade steel levers, 2 plastic rollers
19
Rod actuator

13/34

q B
6
6
6
1)
12

Siemens IC 10 2012 Industrial
Controls Catalog
12/37
Limit Switches


Complete units
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
Plain plunger
3SE5 122-0BB01
1 unit
1 unit
1 unit
1 unit
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 122-0PB01
1 unit
3SE5 122-0BC02
1 unit
1 unit
1 unit
1 unit
Rounded plungers
Rounded plunger
PS*
Price per
PU

Plain plungers
PU
(UNIT,
SET, M)
3SE5 122-0CB01
3SE5 122-0KB01
3SE5 122-0LB01
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 122-0PC02
1 unit
3SE5 122-0BD02
1 unit
1 unit
1 unit
3SE5 122-0CC02
3SE5 122-0KC02
3SE5 122-0LC02
Roller plungers

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 122-0LD02
1 unit
3SE5 122-0BE01
1 unit
1 unit
1 unit
1 unit
3SE5 122-0CD02
3SE5 122-0KD02
Roller plunger
Roller levers
Roller lever
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 122-0PE01
1 unit
3SE5 122-0CE02
1 unit
3SE5 122-0BF01
1 unit
1 unit
1 unit

1 NO + 1 NC
12

1 NO + 1 NC
1 NO + 1 NC
2 NO + 1 NC
3SE5 122-0CE01
3SE5 122-0KE01
3SE5 122-0LE01
3SE5 122-0CF01
3SE5 122-0PF01
Angular roller
lever
1)
Popular versions.

12/38
Siemens IC 10 2012
13/35
Limit Switches



Version
Contacts
DT Complete units
LEDs
Configurator
Order No.

Spring rods

1 NO + 1 NC
PU
(UNIT,
SET, M)
PS*
Price per
PU
3SE5 122-0CR01
1 unit
3SE5 122-0BH01
1 unit
1 unit
1 unit
1 unit
Spring rod
Twist levers
Twist lever
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
2 NO + 1 NC
3SE5 122-0PH01
1 unit
3SE5 122-0CH02
With metal lever 27 mm and high-grade steel roller 19 mm
3SE5 122-0KH01
3SE5 122-0LH01
1 NO + 1 NC
1 unit
1 NO + 2 NC
3SE5 122-0LH02
1 unit
3SE5 122-0BH60
1 unit
1 unit

1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 122-0LH60
1 unit
3SE5 122-0BH50
1 unit
1 unit
3SE5 122-0CH01
3SE5 122-0CH60
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
3SE5 122-0LH50
1 unit
3SE5 122-0CT11
1 unit
3SE5 122-0CH50
Fork levers, latching
With metal lever and 2 plastic rollers 19 mm

1 NO + 1 NC
1 NO + 1 NC
3SE5 122-0CH80
1 unit
1 NO + 1 NC
3SE5 122-0CH82
1 unit
12
Fork lever
Rod actuators

Rod actuator
1)
Popular versions.
13/36
Note:
Siemens IC 10 2012
12/39
Limit Switches

Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
Price per
PU
With 3 x M20 x 1.5 connecting thread
Basic switch
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 122-0MA00
1 unit
2 NO + 1 NC
3SE5 122-0PA00
1 unit
3SE5 122-0BA00-1CA0
1 unit
1 unit
1 unit
1 unit
With increased
corrosion
protection
3SE5 122-0BA00
3SE5 122-0CA00
3SE5 122-0KA00
3SE5 122-0LA00
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 122-0MA00-1CA0
1 unit
2 NO + 1 NC
3SE5 122-0PA00-1CA0
1 unit
3SE5 122-1KA00
1 unit
1 unit
1 unit
1 unit
PU
(UNIT,
SET, M)
PS*

1 NO + 2 NC
24 V DC
1 NO + 2 NC
24 V DC
1 NO + 2 NC
230 V AC
1 NO + 2 NC
230 V AC
3SE5 122-0CA00-1CA0
3SE5 122-0KA00-1CA0
3SE5 122-0LA00-1CA0
3SE5 122-1LA00
3SE5 122-3KA00
3SE5 122-3LA00
With 2 LEDs
1)

Version
Note:
DT Modular system
Diameter
Order No.
mm
Price per
PU
12
Plain plungers
10
q A
3SE5 000-0AB01
1 unit

10
q B
3SE5 000-0AC02
1 unit

Rounded plunger,
roller plunger
Roller lever
Angular roller
lever
13
q B
3SE5 000-0AD02
1 unit
Roller levers
22
22
22
22
q A
3SE5 000-0AE01
3SE5 000-0AE02
3SE5 000-0AE03
3SE5 000-0AE04
1
1
1
1
1 unit
1 unit
1 unit
1 unit

22
22
22
22
q A
q B
3SE5 000-0AF01
3SE5 000-0AF02
3SE5 000-0AF03
3SE5 000-0AF04
1
1
1
1
1 unit
1 unit
1 unit
1 unit
B
B
B
3SE5 000-0AR01
3SE5 000-0AR03
3SE5 000-0AR04
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AR02
1 unit
q B
q B
q B
q B
q B

7
7
Spring rod

12/40
Siemens IC 10 2012
13/37

Limit Switches

Version

DT Modular system
Diameter
Order No.
mm
Twist actuators
Twist actuator

PU
(UNIT,
SET, M)
PS*
Price per
PU
q A
3SE5 000-0AH00
1 unit
q B
3SE5 000-0AT10
1 unit
q A
q B
3SE5 000-0AA01
3SE5 000-0AA02
3SE5 000-0AA03
3SE5 000-0AA04
3SE5 000-0AA05
3SE5 000-0AA07
3SE5 000-0AA08
3SE5 000-0AA11
3SE5 000-0AA12
1
1
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
19
q B
3SE5 000-0AA15
1 unit
3SE5 000-0AA24
Twist lever
q A
q B
q B
q B
q B
q B
q B
Twist levers 35 mm, offset

19
q B
1 unit
30
q B
1 unit
Twist levers, adjustable length,

with grid hole
3SE5 000-0AA26
19
19
50
50
19
19
q B
q B
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit

Twist lever, adjustMetal lever, plastic roller
able length
3SE5 000-0AA60
3SE5 000-0AA61
3SE5 000-0AA67
3SE5 000-0AA68
3SE5 000-0AA62
3SE5 000-0AA63
19
19
30
50
50
19
19
A
B
B
B
B
B
B
3SE5 000-0AA50
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA57
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA53
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
q B
q B
3SE5 000-0AT01
3SE5 000-0AT02
3SE5 000-0AT03
3SE5 000-0AT04
1
1
1
1
1 unit
1 unit
1 unit
1 unit
B
B
B
3SE5 000-0AA80
3SE5 000-0AA81
3SE5 000-0AA82
1
1
1
1 unit
1 unit
1 unit
Fork lever

19
19
19
2 high-grade steel levers, 2 high-grade steel rollers 19
q B
q B
q B
q B
q B
q B
6
6
6
12
Twist levers 27 mm, offset, type A acc. to EN 50041

19
19
19
Metal lever, 2 plastic rollers
19
30
50
50
19
19
Rod actuator
1)
13/38
Siemens IC 10 2012

12/41
Limit Switches

Metal enclosures
Enclosure width 56 mm, XL
Metal enclosures
Complete units
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
2 (1 NO + 1 NC)
PS*
Price per
PU
Complete units1) Enclosure width 56 mm, XL

Plain plungers
PU
(UNIT,
SET, M)
3SE5 162-0CB01
1 unit
3SE5 162-0EC02
1 unit
3SE5 162-0BD02
Plain plunger
Rounded plungers

Rounded plunger 2 mm travel difference
1 NO + 1 NC and
1 NO +2 NC
Roller plungers

2 (1 NO + 1 NC)
1 unit
2 (1 NO + 1 NC)
3SE5 162-0CD02
1 unit
3SE5 162-0BE01
Roller plunger
Roller levers

2 (1 NO + 1 NC)
1 unit
2 (1 NO + 1 NC)
3SE5 162-0CE01
1 unit
3SE5 162-0CE02
1 unit
3SE5 162-0CF01
1 unit
3SE5 162-0CH01
1 unit

Roller lever
2 (1 NO + 1 NC)

2 (1 NO + 1 NC)
Angular roller
lever
12
Twist levers

2 (1 NO + 1 NC)
Twist lever
1)
Popular versions.

12/42
Note:
Siemens IC 10 2012
13/39
Limit Switches

Metal enclosures
Metal enclosures
Modular system
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
Price per
PU
Basic switches Enclosure width 56 mm, XL

2 (1 NO + 1 NC)
2 (1 NO + 1 NC)
2 (1 NO + 2 NC)
3SE5 162-0DA00
1 unit
3SE5 162-0BA00-1CA0
1 unit
1 unit
1 unit
PU
(UNIT,
SET, M)
PS*

Basic switch
2 (1 NO + 1 NC)
2 (1 NO + 1 NC)
2 (1 NO + 2 NC)
3SE5 162-0CA00-1CA0
3SE5 162-0DA00-1CA0

Version
3SE5 162-0CA00
Note:

1)
3SE5 162-0BA00
DT Modular system
Diameter
Order No.
mm
Price per
PU
Plain plungers
10
q A
3SE5 000-0AB01
1 unit

10
q B
3SE5 000-0AC02
1 unit

13
q B
3SE5 000-0AD02
1 unit
Roller levers
22
22
22
22
q A
3SE5 000-0AE01
3SE5 000-0AE02
3SE5 000-0AE03
3SE5 000-0AE04
1
1
1
1
1 unit
1 unit
1 unit
1 unit

22
22
22
22
q A
q B
3SE5 000-0AF01
3SE5 000-0AF02
3SE5 000-0AF03
3SE5 000-0AF04
1
1
1
1
1 unit
1 unit
1 unit
1 unit
B
B
B
3SE5 000-0AR01
3SE5 000-0AR03
3SE5 000-0AR04
1
1
1
1 unit
1 unit
1 unit
3SE5 000-0AR02
1 unit
Plain plunger
Rounded plunger
Roller lever
Angular roller
lever
q B
q B
q B
q B
q B

7
7
Spring rod
12
Roller plunger
13/40

Siemens IC 10 2012
12/43
Limit Switches

Metal enclosures
Enclosure width 56mm and 56mm, XL
Metal enclosures
Version
DT Modular system
Diameter
Order No.
mm
Twist actuators
Twist actuator

PU
(UNIT,
SET, M)
PS*
Price per
PU
q A
3SE5 000-0AH00
1 unit
q B
3SE5 000-0AT10
1 unit
q A
q B
3SE5 000-0AA01
3SE5 000-0AA02
3SE5 000-0AA03
3SE5 000-0AA04
3SE5 000-0AA05
3SE5 000-0AA07
3SE5 000-0AA08
3SE5 000-0AA11
3SE5 000-0AA12
1
1
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
Twist lever
Twist levers 27 mm, offset, type A acc. to EN 50041

19
19
19
Metal lever, 2 plastic rollers
19
30
50
50
19
19
q A
q B
q B
q B
q B
q B
q B
Twist levers 35 mm, offset

19
q B
3SE5 000-0AA15
1 unit

19
30
q B
1
1
1 unit
1 unit
Twist levers, adjustable length,

with grid hole
3SE5 000-0AA24
3SE5 000-0AA26
19
19
50
50
19
19
q B
q B
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit

Twist lever, adjustMetal lever, plastic roller
able length
3SE5 000-0AA60
3SE5 000-0AA61
3SE5 000-0AA67
3SE5 000-0AA68
3SE5 000-0AA62
3SE5 000-0AA63
19
19
30
50
50
19
19
A
B
B
B
B
B
B
3SE5 000-0AA50
3SE5 000-0AA51
3SE5 000-0AA55
3SE5 000-0AA57
3SE5 000-0AA58
3SE5 000-0AA52
3SE5 000-0AA53
1
1
1
1
1
1
1
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
q B
3SE5 000-0AT01
3SE5 000-0AT02
3SE5 000-0AT03
3SE5 000-0AT04
1
1
1
1
1 unit
1 unit
1 unit
1 unit
3SE5 000-0AA80
3SE5 000-0AA81
3SE5 000-0AA82
3SE5 000-0AA83 2)
1
1
1
1
1 unit
1 unit
1 unit
1 unit
Fork lever

19
19
19
2 high-grade steel levers, 2 high-grade steel rollers 19
12

q B
q B
q B
q B
q B
q B
q B
q B
6
6
6
6
B
B
B
B
Rod actuator
1)
2)

For Enclosure width 56mm XL only.

12/44
Siemens IC 10 2012
13/41
Limit Switches



Modular system
Version
Contacts
DT Modular system
LEDs
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
PU
(UNIT,
SET, M)
PS*
Configurator
Order No.
Basic switches Enclosure width 31 mm (with rounded

With plunger
Price per
PU
plunger1))
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 212-0CC05-1AJ0
3SE5 212-0KC05-1AJ0
3SE5 212-0LC05-1AJ0
Basic switch
1)

For enclosures with widths of 31 mm, the basic switch is a complete unit
Version
Note:
DT Modular system
Diameter
Order No.
mm
Price per
PU

10
q B
3SE5 000-0AD03-1AJ0
1 unit
13
q B
3SE5 000-0AE10-1AJ0
1 unit
13
q B
3SE5 000-0AE12-1AJ0
1 unit
13
q B
3SE5 000-0AF10-1AJ0
1 unit
13
q B
3SE5 000-0AF12-1AJ0
1 unit
q B
3SE5 000-0AK00-1AJ0
1 unit
3SE5 000-0AA21-1AJ0
Plastic rollers
Roller plunger
Roller lever
Twist actuators

Twist actuator
12
Angular roller
lever
Twist lever straight, 21 mm, type A acc. to EN 50047

19
q B
1 unit
19
q B
3SE5 000-0AA31-1AJ0
1 unit
19
q B
3SE5 000-0AA60-1AJ0
1 unit
19
q B
1 unit
Twist lever
3SE5 000-0AA62-1AJ0
Twist lever,
adjustable length
13/42


Controls Catalog
Siemens IC 10 2012 Industrial
12/45
Limit Switches


Complete units
Version
Contacts
DT Complete units
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU


1 NO + 1 NC
3SE5 112-0CC02-1AJ0
1 unit
3SE5 112-0CH62-1AJ0
1 unit
Rounded plunger
With high-grade steel lever with grid hole

and plastic roller 19 mm
1 NO + 1 NC
Note:
see "Modular System".

q Positive opening according to IEC 60947-5-1, Appendix K or positively
driven actuator, necessary in safety circuits.
Modular system
2, 3 or 4 contacts Degree of protection IP66/IP67 Cable entry M20 1.5
Version
Contacts
DT Modular system
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
Price per
PU
3SE5 112-0CA00-1AJ0
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 112-0LA00-1AJ0
1 unit
3SE5 122-0CA00-1AJ0
1 unit
1 unit
3SE5 112-0KA00-1AJ0
12
Basic switch

1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
3SE5 122-0LA00-1AJ0
1 unit
3SE5 162-0BA00-1AJ0
1 unit
1 unit
3SE5 122-0KA00-1AJ0
Basic switch
Basic switches Enclosure width 56 mm, XL

2 (1 NO + 1 NC)
2 (1 NO + 1 NC)
3SE5 162-0CA00-1AJ0
Basic switch
q Positive opening according to IEC 60947-5-1, Appendix K or positively
driven actuator, necessary in safety circuits.

Industrial Controls
Catalog Siemens IC 10 2012
12/46
Note:
13/43

Limit Switches

Version

DT Modular system
Diameter
Order No.
mm
PU
(UNIT,
SET, M)
PS*
Price per
PU

10
q B
3SE5 000-0AC02-1AJ0
1 unit
10
q B
3SE5 000-0AD02-1AJ0
1 unit
13
q B
3SE5 000-0AE01-1AJ0
1 unit
13
q B
3SE5 000-0AE03-1AJ0
1 unit
13
q B
3SE5 000-0AF01-1AJ0
1 unit
13
q B
3SE5 000-0AF03-1AJ0
1 unit
q B
3SE5 000-0AH00-1AJ0
1 unit
3SE5 000-0AA01-1AJ0

Rounded plunger
Roller plunger
Roller levers
Roller lever
Angular roller
lever
Twist actuators

Twist actuator

19
q B
1 unit
19
q B
3SE5 000-0AA11-1AJ0
1 unit
19
q B
3SE5 000-0AA60-1AJ0
1 unit
19
q B
1 unit
Twist lever
3SE5 000-0AA62-1AJ0
12
Twist lever,
adjustable length
13/44
Siemens IC 10 2012

12/47
Limit Switches

Compact design

Compact design
Overview
Benefits
Very compact yet with the same rating as the 3SE51 standard
switches, for notable space savings in confined installation
conditions
Various actuator versions available
Actuator heads rotatable in increments of 90
Time is saved when mounting the fully assembled unit
With metal enclosure of degree of protection IP67, ideal for
use in rough industrial environments
Insensitive to electromagnetic interference
Compact design in width 30 mm
Particularly in harsh environments or on equipment with limited

space, the small 3SE5 4 position switches in compact design
with a depth of 16 mm and a weight of only 80 g (without cable)
are ideal. Above all the versions with molded cable can be
mounted in the most confined places.
3SE5 4 compact position switches are available in two different
widths as complete units:
The 3SE5 413 series complies with the EU standard and features a 30 mm wide enclosure with drilled holes at a distance
of 20 mm.
The 3SE5 423 series meets the requirements of the US market
and features a 40 mm wide enclosure with drilled holes at a
spacing of 25 mm.
Both the enclosure and the twist actuator are made of metal and
comply with the high IP67 degree of protection. Following actuators are available:
Rounded plungers
Rounded plungers with central fixing
Rounded plungers with external seal
Roller plungers
Roller plunger with central fixing
Twist levers
12
The contact block is designed with snap-action contacts

1 NO + 1 NC. The NC contact complies with the requirements for
positive opening acc. to IEC 60947-5-1.
Use in safety circuits up to Category 4 according to
EN ISO 13849-1.
Connection:
With molded cable, 2 m or 5 m long
With M12 connector socket

12/48
13/45
Siemens IC 10 2012
Limit Switches

Compact design

Compact design

2 snap-action contacts 1 NO + 1 NC Degree of protection IP67 With connecting cable or M12 connector socket
Operating mechanism
DT Configurator
Enclosure width
Order No.
mm
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
Price per
PU
Complete units Enclosure width 30 or 40 mm

Rounded plungers
Standard mounting
- With 2 m cable 5 x 0.75 mm2
3SE5 413-0CC20-1EA2
30
40
30
- With M12 connector socket
30
40
3SE5 423-0CC20-1EB1
1 unit
30
3SE5 413-0CC21-1EA2
1 unit
40
3SE5 423-0CC21-1EA2
1 unit
30
3SE5 413-0CC22-1EA2
1 unit
40
3SE5 423-0CC22-1EA2
1 unit
30
1 unit
3SE5 413-0CD20-1EA2
40
1 unit
30
1 unit
30
1 unit
40
3SE5 423-0CD20-1EB1
1 unit
30
3SE5 413-0CD21-1EA2
1 unit
40
3SE5 423-0CD21-1EA2
1 unit
30
3SE5 413-0CD23-1EA2
1 unit
30
3SE5 413-0CN20-1EA2
1 unit
40
1 unit
30
1 unit
30
1 unit
40
1 unit
Rounded plunger
3SE5 423-0CC20-1EA2
3SE5 413-0CC20-1EA5
3SE5 413-0CC20-1EB1
With central fixing M12 x 1

With central fixing

With external seal
With external seal

Roller plungers
Standard mounting
Roller plunger
3SE5 423-0CD20-1EA2
3SE5 413-0CD20-1EA5
3SE5 413-0CD20-1EB1
With central fixing M12 x 1

Actuator head rotated 90
12
With plug
With plug, enclosure

width 40 mm
Twist levers
Standard mounting
3SE5 423-0CN20-1EA2
3SE5 413-0CN20-1EA5
3SE5 413-0CN20-1EB1
3SE5 423-0CN20-1EB1
Twist lever
13/46
Siemens IC 10 2012

12/49
Limit Switches
Open-Type
3SE5, open-type design

Overview
Their compact design makes these switches particularly suitable for use in confined conditions. The fixing dimensions and
operating points are according to EN 50047.
The switches are equipped with two or three contacts in
slow-action or snap-action versions. The stroke is 6 mm.
The empty enclosure can be equipped with all switch block
versions (see page 13/49).
Open-type design

2 or 3 contacts Degree of protection IP20 (2 contacts), IP10 (3 contacts)
Version
DT Configurator
Contacts
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU
Plastic enclosures Enclosure width 30 mm

With teflon plunger, 6 mm
1 NO + 1 NC
1 NO + 1 NC
1 NO + 2 NC
1 NO + 2 NC
Slow-action contacts with make-before-break
1 NO + 2 NC
2 NO + 1 NC
Empty enclosures
without contact block
1 NO + 1 NC
1 NO + 1 NC
3SE5 250-0BC05
1 unit
3SE5 250-0CC05
1 unit
3SE5 250-0KC05
1 unit
1 unit
1 unit
3SE5 250-0PC05
1 unit
3SE5 250-0AC05
1 unit
3SE5 050-0BA00
1 unit
- Standard
3SE5 050-0CA00
1 unit
- 2 2 mm switching interval
1 unit
- Short stroke
1 unit
2 contacts
3SE5 250-0LC05
3SE5 250-0MC05
12
3 contacts
Empty enclosures
Contact blocks with 2 contacts
for open-type design1)
2 contacts
3SE5 050-0GA00
3SE5 050-0NA00

1) Contact blocks with 3 contacts
see page 13/49.

12/50
Siemens IC 10 2012
13/47
Limit Switches

Accessories
Version
DT Order No.
List
Price $
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Plug-in connections for M20 1.5 connecting threads
3SY3 136
3SY3 131
3SY3 127
3RX8 000
3SY3 134
Connector sockets (6-pole+PE), for M201.5 B

For max. 250 V, 10 A
With 0.75 mm2 connecting cable,
plastic, degree of protection IP65,
ambient temperature 40 to +90 C
3SY3 131
1 unit
102
0.030
Cable boxes (6-pole + PE)1)

A
With terminal compartment, can be preassembled, plastic, degree of protection IP65
3SY3 136
1 unit
102
0.065
Connector sockets (4-pole), M12,

for M20 1.5, fixed
For max 250 V, 4 A, Uimp = 2500 V
With four 0.25 mm2 connecting cables,
3SY3 127
1 unit
102
0.010
Cable boxes (4-pole), M12, with terminal

compartment, can be pre-assembled
3RX8 000-0CB45
1 unit
574
0.015
Angular cable boxes (4-pole), M12, with ter- A

minal compartment, can be pre-assembled
3RX8 000-0CC45
1 unit
574
0.015

for M20 1.5, fixed
For max 125 V, 4 A, Uimp = 1500 V
With five 0.25 mm2 connecting cables,
3SY3 128
1 unit
102
0.010
Cable boxes (5-pole), M12, with terminal

compartment, can be pre-assembled
3RX8 000-0CB55
1 unit
574
0.016
Angular cable boxes (5-pole), M12, with ter- A

minal compartment, can be pre-assembled
3RX8 000-0CC55
1 unit
574
0.016

for M20 1.5, fixed, metal version
For max 30 V, 2 A, Uimp = 800 V
With eight 0.25 mm2 connecting cables,
metal, degree of protection IP67,
3SY3 134
1 unit
102
0.025
Cable boxes (8-pole), M12

With 5 m PUR cable, 8 0.25 mm2, IP67
3RX8 000-0CB811GF0
1 unit
574
0.335
metal M16 x 1.5 to 1/2 NPT
3SX1997
1 unit
0.022
3SB3901-0CK
1 unit
0.011
3SX1998
1 unit
0.022
plastic M20 x 1.5 to 1/2 NPT
3SX9918
1 unit
0.012
plastic cable gland, M20 x 1.5
3SX9926
1 unit
0.010
3SX1999
1 unit
0.022
Adaptors for 3SE. (with M 16)

3SX1997
Adaptors for 3SE2 (with M 20)

plastic M20 x 1.5 wire gland
metal M20 x 1.5 to 1/2 NPT
3SX9918
3SX1998
3SX9918
3SX9926
Adaptors for 3SE. (with M 25)

metal M 25 x 1.5 to 1/2 NPT
3SX1999
1)
For wiring, a crimping tool is necessary,

max. conductor cross-section 1 mm2.
13/48
Product Category: LIMT

Limit Switches

Accessories and spare parts

Version
Color/
contacts
DT Order No.
PU
(UNIT,
SET, M)
PS*
Black
3SE5 000-0AC30
1 unit
3SE5 232-0AC05
1 unit
1 unit
1 unit
3SE5 242-0AC05-1CA0
1 unit
3SE5 212-0AC05
1 unit
1 unit
1 unit
1 unit
1 unit
Enclosure width 56 mm, XL1)
1 unit
3SE5 162-0AA00
1 unit
3SE5 000-0BA00
1 unit
- Standard
- Gold-plated contacts
3SE5 000-0CA00
1 unit
1 unit
- 2 2 mm switching interval
1 unit
- Short stroke
3SE5 000-0NA00
1 unit
3SE5 000-0KA00
1 unit
1 unit
Optional accessories for 3SE52
Protective caps, rubber,

for rounded plungers acc. to EN 50047,
3SE5 ...-..C05
Price per
PU
Spare parts for 3SE51, 3SE52
Empty enclosures, plastic
Turquoise
3SE5 232-0AC05-1CA0
3SE5 242-0AC05
Empty enclosures, metal
Turquoise
Contact blocks with 2 contacts2)
2 contacts
1 NO + 1 NC
1 NO + 1 NC
Contact blocks with 3 contacts
3 contacts
3SE5 112-0AA00
3SE5 112-0AA00-1CA0
3SE5 122-0AA00
3SE5 122-0AA00-1CA0
3SE5 000-0CA00-1AC1
3SE5 000-0GA00
1 NO + 2 NC
1 NO + 2 NC
Slow-action contacts with make-before- 1 NO + 2 NC

break
3SE5 000-0MA00
1 unit
3SE5 000-0PA00
1 unit
3SE5 060-0BA00
1 unit
1 unit
1 unit
2 NO + 1 NC
Contact blocks for enclosure XL1)
2 contacts
3SE5 212-0AC05-1CA0
1 NO + 1 NC
1 NO + 1 NC
Slow-action contacts with make-before- 1 NO + 2 NC

break
3SE5 000-0LA00
3SE5 060-0CA00
3SE5 060-0MA00
Positive opening according to IEC 60947-5-1, Appendix K.

q
12
1) Equip XL enclosures only with contact combinations according to pages

12/11, 12/42 and 12/43.
2) Unsuitable for open-type position switches; see page 13/47.

12/52
Siemens IC 10 2012
13/49
Limit Switches

Version

Rated voltage
LED
DT Order No.
Price per
PU
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
Spare parts for 3SE51, 3SE52
Covers for plastic enclosures, width 31 mm
Turquoise with LED
31 mm, turquoise with LED
230 AC
Yellow
Yellow with LED
24 DC
230 AC
3SE5 230-3AA00-1AG0
1 unit
24 DC
3SE5 130-1AA00
1 unit
230 AC
1 unit
Yellow
1 unit
Yellow with LED
24 DC
1 unit
230 AC
3SE5 130-3AA00-1AG0
1 unit
24 DC
3SE5 240-1AA00
1 unit
230 AC
1 unit
Yellow
1 unit
Yellow with LED
24 DC
1 unit
230 AC
3SE5 240-3AA00-1AG0
1 unit
24 DC
3SE5 210-1AA00
1 unit
230 AC
1 unit
Yellow
1 unit
Yellow with LED
24 DC
1 unit
230 AC
3SE5 210-3AA00-1AG0
1 unit
24 DC
3SE5 110-1AA00
1 unit
230 AC
1 unit
Yellow
1 unit
Yellow with LED
24 DC
1 unit
230 AC
3SE5 110-3AA00-1AG0
1 unit
24 DC
3SE5 120-1AA00
1 unit
230 AC
1 unit
Yellow
1 unit
Yellow with LED
24 DC
1 unit
230 AC
3SE5 120-3AA00-1AG0
1 unit
3SE5 160-0AA00-1AG0
1 unit

Turquoise with LED
40 mm, yellow with LED

Turquoise with LED
Covers for metal enclosures, width 31 mm

Turquoise with LED
3SE5 230-1AA00
24 DC

Turquoise with LED

Turquoise with LED
Covers for XL metal enclosures, width 56 mm
3SE5 230-0AA00-1AG0
3SE5 230-1AA00-1AG0
3SE5 130-3AA00
3SE5 130-0AA00-1AG0
3SE5 130-1AA00-1AG0
3SE5 240-3AA00
3SE5 240-0AA00-1AG0
3SE5 240-1AA00-1AG0
3SE5 210-3AA00
3SE5 210-0AA00-1AG0
3SE5 210-1AA00-1AG0
3SE5 110-3AA00
3SE5 110-0AA00-1AG0
3SE5 110-1AA00-1AG0
3SE5 120-3AA00
3SE5 120-0AA00-1AG0
3SE5 120-1AA00-1AG0
12
Yellow
3SE5 230-3AA00
13/50
Siemens IC 10 2012

12/53
Limit Switches
SIRIUS 3SE5 Mechanical Position
Switches

Technical
data
General data
Technical specifications
Type
3SE5 1.., 3SE5 2..
General data
Standards
3SE5 41.
IEC 60947-5-1, EN 60947-5-1
Rated insulation voltage Ui
Rated impulse withstand voltage Uimp
400
400
Class 3
Class 3
kV
Rated operational voltage Ue
400 V AC,
over 300 V AC
only for equal potential1)
300 AC
Conventional thermal current Ith
10
10
2-pole
3-pole
2-pole
Ie / AC-15
6
3
1.5
Ie / AC-15
6
6
3
Ie / DC-13
3
0.55
0.27
Ie / DC-13
3
0.55
0.27
Pollution degree acc. to IEC 60664-1
Rated operational current Ie
With alternating current 50/60 Hz

- At 24 V
- At 120 V
- At 240 V
A
A
A
Ie / AC-15
6
6
3
For direct current

- At 24 V
- At 125 V
- At 250 V
A
A
A
Ie / DC-13
3
0.55
0.27
Short-circuit protection2)
With DIAZED fuse links,
gG operational class
With miniature circuit breaker, Char. C
Mechanical endurance
Basic switches
With spring rod, 3SE5 ...-..R..
With fork lever 3SE5 1..-..T..
Electrical endurance
With 3RH.1, 3RT contactors in size S00, S0
For utilization category AC-15 when
switching off Ie / AC-15 at 240 V
With utilization category DC-12/DC-13
Rated data acc. to s, u and U.

Rated voltage
Uninterrupted current
Switching capacity
2)
30 106 operating cycles

0.1 106 operating cycles
6 000 operating cycles/h

mm
0.05
1
V
A
300
6
Heavy duty,
A 300 / B 300 / Q 300
A 300 / Q 300
For slow-action contacts 1 NO + 2 NC with make-before-break and

2 NO + 1 NC the following applies: over 250 V AC only equal potential
Without any welds according to IEC 60947-5-1.
Type
3SE5 23.
3SE5 13
3SE5 24.
3SE5 21.
3SE5 11.
50
Zinc diecasting GD Zn Al4 Cu1

31
40
56
Enclosure
Enclosure
Material
Width
mm
Degree of protection acc. to IEC 60529

Ambient temperature
During operation
In operation, switch with LEDs
Storage, transport
Ultramid A3X2G7
31
40
IP65
C
C
C
IP66/IP671)
25 ... +85
25 ... +70
40 ... +90
Mounting position
Any
Cable entry
1 (M20 1.5)
3SE5 12.,
3SE5 16.
3SE5 4..
3SE5 25.
30 / 40
30
IP67
IP20, IP10
12
1)

For direct current depending on the loading of the switch
Switching frequency
Switching accuracy
For repeated switching,
measured at the plunger of the contact block
With twist actuators
3SE5 42.
25 ... +85 25 ... +85
40 ... +90 40 ... +90
Connection
2 (M20 1 (M20 1.5)

1.5)
Conductor cross-sections2)
Solid
Finely stranded with end sleeve
mm
mm
2 x (0.5 ... 0.75), 1 (0.5 ... 1.5)

2 (0.5 ... 1.5)
Tightening torque, contact block
Nm
0.8 ... 1.0
Protective conductor connection inside enclosure
1)
2)
M3.5
3 (M20
1.5)
For twist actuators with spring rod and rod actuators: IP65/IP67.
For the maximum number of connectable conductors for the respective
contact block see operating instructions.

13/51
Siemens IC 10 2012
12/7
Limit Switches

Enclosure widths 31 mm and 50 mm
Configuration
Actuation and operating travel (angle) for enclosure width 31 mm and 50 mm
Minimum force required

in direction of operation: 18 N
5,5
mm
1,5
1,0
1,3
3,0
3,0
5,5
5,5
-.HF10
mm
12,5
11,9
11,0
12,5
11,9
11,0
*
0
2,3
mm
mm
Short stroke
Operation by bar (standard)
Roller plungers
Lateral actuation
3SE5 2..-..D03, -..D04 3SE5 2..-..D10, -..D11 1 NO + 1 NC
30
14
0
21
13
Ident. No. 11
42,4
18
30
10
0
NSC0_00878
10
22
NSC0_00769
Central fixing
1 NO + 1 NC
NSC0_00837a
mm
3,4 4,0
4,8
13
21
Ident. No. 11
14
1 NO + 2 NC
3SE5 2..-.KD03, -.KD10
0
NSC0_00770
21 31 13
Ident. No. 12
NSC0_00768
3SE5 2..-.HD03, -.HD10
22
NSC0_00839a
21-22
31-32
13-14
mm
4,7
5,5
22
13
21
Ident. No. 11
NSC0_00838a
13-14
21-22
mm
2,8 3,6
4,6
NSC0_00841
13-14
21-22
mm 0,9 2,6
4,6
Short stroke
1 NO + 2 NC
3SE5 2..-.LD03
14 32 22
13 31 21
Ident. No. 12
3SE5 2..-.FC05 + head1)
1 NO + 1 NC
22 32 14
1)
14
21-22
13-14
vmax = 1 m/s
mm
Lateral actuation
3SE5 2..-.BD03
NSC0_00882
Form C
Contact closed
Contact open
NSC0_00767
vmax
Contact closed
Contact open
NSC0_00767
13,8
13,0
12,2
Switching interval 2 2 mm
NSC0_00768
Operating point acc. to EN 50047

(snap-action)
Operating point on return (snap-action)
Positive opening acc. to EN 60947-5-1
Direction of operation
Max. actuating speed
5,5
NSC0_00858a
13,2
7
mm
Switching interval 2 2 mm
NSC0_00843
NSC0_00858a
14,2
13,6
13,0
13-14
21-22
mm
vmax = 1 m/s
21-22
13-14
NSC0_00886
14,8
14,2
13,5
13-14
21-22
0,8
-.FC05 + head1) -.GC05 + head1) -.LF10
NSC0_00859a
-.KF10
13
30
8,5
Actuation along plunger axis
-.BF10
21-22
31-32
13-14
30,4
17
22,5
NSC0_00857a
mm
3,2
5,5
Short stroke
3SE5 2..-..F1.
2,2
3,0
5,5
NSC0_00834a
3,2
3,8
mm
0,5
NSC0_00860a
3,1
3,5
1,9
NSC0_00832a
2,6
NSC0_00831a
2,4
13-14
31-32
21-22
mm
NSC0_00836a
-.LC05
13-14
21-22
mm
-.GC05
13-14
21-22
-.FC05
13-14
31-32
21-22
-.CC05, -.HC05
-.KC05
1,0
7,7
NSC0_00767
NSC0_00770
-.BC05
mm
vmax = 1 m/s
13 31 21
Ident. No. 12
NSC0_00876
13
21
Ident. No. 11
NSC0_00835a
21 31 13
Ident. No. 12
1 NO + 2 NC
14 32 22
13-14
21-22
Rounded plungers, type B
3SE5 2..-..C05
21
13
Ident. No. 11
13-14
21-22
Contact closed
Contact open
1 NO + 1 NC
22
14
NSC0_00833a
vmax
1 NO + 2 NC
22 32 14
21-22
31-32
13-14
1 NO + 1 NC
22
14
NSC0_00769

(snap-action)
21-22
13-14
NSC0_00840a
13-14
31-32
21-22
mm
3,2 3,9
4,9
The basic switch and actuator headactuator head must be ordered separately.
13/52

Limit Switches

Configuration
Roller levers, type E
8,5
21
13
Ident. No. 11
14
21-22
13-14
mm
12,5 13,2 13,8
13
21
Ident. No. 11
14

3SE5 2..-.KE10
22 32 14
NSC0_00770
21 31 13
Ident. No. 12
Twist levers1), type A
mm
13,0 13,8 14,4
22
3SE5 2..-.BK21
14
13 31 21
Ident. No. 12
21
13
Ident. No. 11
NSC0_00865a
36
38 40
21-22
13-14
90
14
13
21
Ident. No. 11
3SE5 2..-.KK21
0
21 31 13
Ident. No. 12
NSC0_00770
22 32 14
Twist levers1), adjustable length
3SE5 2..-.BC05 + head2)
19
22
14
21
13
Ident. No. 11
NSC0_00865a
36
38 40
21-22
13-14
90
14
vmax = 1.5 m/s

Minimum torque
in direction of operation: 0.25 Nm
22 32 14
21 31 13
Ident. No. 12
NSC0_00770
Adjustment of the lever in increments of 10, maximum deflection 90.

NSC0_00867a
36 38 40
2)
21-22
31-32
13-14
90
mm
10,6 11,4 11,8
NSC0_00866a
34 36 38
13-14
21-22
90
NSC0_00926
*
7,5 22 44
13-14
21-22
90
34 36 44
NSC0_00868a
13-14
31-32
21-22
90
3SE5 2..-.HK60
22
13
21
Ident. No. 11
NSC0_00866a
34 36 38
13-14
21-22
90
NSC0_00926
*
7,5 22 44
13-14
21-22
90
Short stroke
3SE5 2..-.LC05 + head2)
1 NO + 2 NC
14 32 22
13 31 21
Ident. No. 12
3SE5 2..-.FC05 + head2)
22
13
21
Ident. No. 11
3SE5 2..-.KC05 + head2)
13-14
21-22
31-32
Deflection in direction of rotation

1 NO + 1 NC
14
1 NO + 2 NC
1)
13 31 21
Ident. No. 12
1 NO + 1 NC
NSC0_00889
44 ... 114
30
NSC0_00852a
3SE5 2..-.LK21
0
14 32 22

1 NO + 1 NC
NSC0_00769
3SE5 2..-..K6.
36 38 40
21-22
31-32
13-14
90
13
Short stroke
1 NO + 2 NC
NSC0_00867a
6,9
3SE5 2..-.FC05 + head2)
22
vmax = 1.5 m/s
1 NO + 2 NC
mm 2,3
3SE5 2..-.HK21
22
13
21
Ident. No. 11
14
Minimum torque
13-14
21-22
1 NO + 1 NC
NSC0_00842
1 NO + 1 NC
0
NSC0_00769
20,8
13
21-22
31-32
13-14
3SE5 2..-.LE10
14 32 22

1 NO + 1 NC
30
NSC0_00888
NSC0_00851a
13-14
21-22
mm 9,4 10,4 11,0
Short stroke
1 NO + 2 NC
NSC0_00850a
3SE5 2..-.FC05 + head2)
22
13
21
Ident. No. 11
1 NO + 2 NC
19
1 NO + 1 NC
vmax = 1 m/s
3SE5 2..-..K2.
3SE5 2..-.HE10
22
NSC0_00767
NSC0_00884
26,5
30
NSC0_00849a
NSC0_00768
14
NSC0_00767
14
1 NO + 1 NC
NSC0_00767
13
22
Lateral actuation
3SE5 2..-.BE10
NSC0_00767
14,7
Lateral actuation
1 NO + 1 NC
NSC0_00769
3SE5 2..-..E1.
Contact closed
Contact open
NSC0_00768
vmax
Contact closed
Contact open
NSC0_00767
NSC0_00767

(snap-action)
NSC0_00768
NSC0_00868a
34 36 44
13-14
31-32
21-22
90
The basic switch and actuator head must be ordered separately.
13/53
Limit Switches

19
22
14
30
21
13
Ident. No. 11
44 ... 114
3SE5 2..-.BK50
NSC0_00908
36 38

1 NO + 1 NC
13-14
21-22
90
14
13
21
Ident. No. 11
3SE5 2..-.KC05 + head2)
1 NO + 2 NC
xvmax = 1.5 m/s

Minimum torque
21 31 13
Ident. No. 12
NSC0_00770
22 32 14
Rod actuators1), type D
NSC0_00910
36 38
13-14
21-22
31-32
90
NSC0_00767
22
3SE5 2..-.BC05 + head2)
1 NO + 1 NC
14
113 ... 203
21
13
Ident. No. 11
0
NSC0_00769
22
NSC0_00908
36 38
13-14
21-22
90
14
13
21
Ident. No. 11
NSC0_00890
vmax = 1.5 m/s

Minimum torque
21 31 13
Ident. No. 12
NSC0_00770
22 32 14
36 38
13-14
21-22
31-32
90
NSC0_00911
34 36
13-14
21-22
31-32
90
NSC0_00909
34 36
13-14
21-22
90
NSC0_00927
7,5 22
13-14
21-22
90
3SE5 2..-.LC05 + head2)
1 NO + 2 NC
14 32 22
13 31 21
Ident. No. 12
Short stroke
Spring rods
NSC0_00911
34 36
13-14
21-22
31-32
90
Deflection of spring rod

1 NO + 1 NC
7
13
21
Ident. No. 11
242,3
142,3
NSC0_00891
22
1)
2)
15
NSC0_00844
13-14
21-22
2,5
3SE5 2..-.LC05 + head2)

NSC0_00874a
0
14 32 22
13 31 21
Ident. No. 12
13-14
21-22
7
Short stroke
1 NO + 2 NC
NSC0_00873a
NSC0_00768
0
vmax = 1 m/s
14
3SE5 2..-.FC05 + head2)
1 NO + 1 NC
13
21
Ident. No. 11
3SE5 2..-.HR01
22
75,8
14
NSC0_00767
The spring rods can be used only with snap-action

contacts.
NSC0_00767
3SE5 2..-..R0.
13/54
13-14
21-22
90
3SE5 2..-.FC05 + head2)
22
13
21
Ident. No. 11
7,5 22
3SE5 2..-.HK80, -.HK82
22
11
NSC0_00910
NSC0_00927

1 NO + 1 NC
14
3SE5 2..-.KC05 + head2)
1 NO + 1 NC
1 NO + 2 NC
13-14
21-22
90
3SE5 2..-.LK50
14 32 22
3SE5 2..-..K8.
34 36
Short stroke
1 NO + 2 NC
13 31 21
Ident. No. 12
NSC0_00909
NSC0_00768
NSC0_00928
14
3SE5 2..-.FC05 + head2)
1 NO + 1 NC
13
21
Ident. No. 11
3SE5 2..-.HK50
22
NSC0_00767
1 NO + 1 NC
NSC0_00769
3SE5 2..-..K5.
NSC0_00767
vmax
Contact closed
Contact open
NSC0_00767
Contact closed
Contact open
NSC0_00768
Operating point acc. to EN 50041/47

(snap-action)
13-14
31-32
21-22
7
15

Limit Switches

Configuration
21 31 13
Ident. No. 12
13
21
Ident. No. 11
13 31 21
Ident. No. 12
3SE5 1..-.BC02
3SE5 1..-.CC02
25,5
mm
mm
1,0
3,1
3,5
3,2
3,8
3SE5 112-..F0.
3SE5 1..-.BF01
0
40
3
R3
16,8
16,2
mm
vmax = 2.5 m/s
21-22
13-14
NSC0_00885
30
5,5
5,5
20,2
19,8
15,5
11
3,2
3SE5 1..-.KA00 + head1) 3SE5 1..-.CF01
NSC0_00861a
22
3SE5 1..-.LF01
NSC0_00862a
50,5
3,0
5,5
2,2
19,2
14,5
14,0
13,0
mm
mm
15,8
15,2
14,2
*
13-14
21-22
5,5
0,8
NSC0_00863a

mm
1,9
21-22
31-32
13-14
vmax = 1.5 m/s
NSC0_00832a
2,6
NSC0_00833a
2,4
NSC0_00831a
NSC0_00875
mm
3SE5 1..-.LC02
NSC0_00864a
21-22
31-32
13-14
10
3SE5 1..-.KC02
13-14
21-22
21-22
13-14
Rounded plungers, type B

3SE5 1..-..C02
NSC0_00768
21
13
Ident. No. 11
1 NO + 2 NC
14 32 22
NSC0_00834a
Contact closed
Contact open
1 NO + 1 NC
22
14
13-14
31-32
21-22
vmax
1 NO + 2 NC
22 32 14
mm
*
13-14
31-32
21-22
1 NO + 1 NC
22
14
NSC0_00767
NSC0_00770

(snap-action)
NSC0_00769

vmax
Roller plungers, type C

14
0
38,5
30
NSC0_00880
21
vmax = 1 m/s
13
1 NO + 1 NC
NSC0_00845a
mm
3,8 4,4 5,0
13
3SE5 1..-.CD02
22
21
NSC0_00846a
*
mm
3,3
13-14
21-22
4,1
5,0
Ident. No. 11
1 NO + 2 NC
3SE5 1..-.KD02
0
22 32 14
21 31 13
14
21-22
13-14
Ident. No. 11

Ident. No. 12
1)
Lateral actuation
3SE5 1..-.BD02
NSC0_00769
22
13
Contact closed
Contact open
Lateral actuation
1 NO + 1 NC
NSC0_00770
3SE5 1..-..D02
Contact closed
Contact open
NSC0_00767

(snap-action)
1 NO + 2 NC
NSC0_00847a
21-22
31-32
13-14
mm
5,4 6,0 6,8
14 32 22
13 31 21
NSC0_00768
3SE5 1..-.LD02
0
*
mm
NSC0_00848a
13-14
31-32
21-22
3,8 4,4 4,8
Ident. No. 12

13/55
Limit Switches

Configuration
(snap-action)
Roller levers
Lateral actuation
30
NSC0_00883
41
0
R2
11
21
13
1 NO + 2 NC
NSC0_00887
13
1 NO + 2 NC
NSC0_00855a
21-22
31-32
13-14
mm
11,1 11,9 12,4
3SE5 1..-.BH01
14
13
NSC0_00869a
30 32 34
21-22
13-14
90
3SE5 1..-.KH01
13
NSC0_00869a
NSC0_00770
30 32 34
21-22
13-14
90
Ident. No. 11
3SE5 1..-.KA00 + head2)
NSC0_00871a
0
NSC0_00770
22 32 14
21 31 13
9,1 9,7 10,6
13
3SE5 1..-.CH01
22
21
NSC0_00870a
*
20
32
40
13-14
21-22
90
3SE5 1..-.LH01
14 32 22
13 31 21
NSC0_00872a
20
32
40
13-14
31-32
21-22
90
14
13
3SE5 1..-.CH60
22
21
NSC0_00870a
*
20
32
40
13-14
21-22
90
Ident. No. 11
1 NO + 2 NC
NSC0_00889
14
1 NO + 1 NC
0
NSC0_00769
21
44 ... 114
30 32 34
21-22
31-32
13-14
90
3SE5 1..-.BH60
14
30
mm
13-14
31-32
21-22
22
NSC0_00856a
Ident. No. 12
1 NO + 1 NC
19
NSC0_00871a
Ident. No. 12

3SE5 1..-..H6.
13 31 21
1 NO + 2 NC
22 32 14
21 31 13
13-14
21-22
8,1 8,7 9,4
Ident. No. 11
1 NO + 2 NC
mm
3SE5 1..-.LE01
14 32 22
1 NO + 1 NC
0
NSC0_00769
21
NSC0_00854a
Ident. No. 12
Ident. No. 11
vmax = 1.5 m/s

Minimum torque
21
22
49,5
30
10,2 10,8 11,2
1 NO + 1 NC
19
mm
3SE5 1..-.CE01
22
21-22
13-14
3SE5 1..-.KE01
22 32 14
21 31 13
Ident. No. 12
14
Ident. No. 11
Twist levers1), type A

3SE5 1..-..H0.
NSC0_00853a
Ident. No. 11
vmax = 2.5 m/s

NSC0_00768
22
1 NO + 1 NC
NSC0_00767
19,8
14
NSC0_00769
22
Lateral actuation
3SE5 1..-.BE01
NSC0_00767
1 NO + 1 NC
NSC0_00770
3SE5 1..-..E0.
NSC0_00768
vmax
Contact closed
Contact open
NSC0_00767
Contact closed
Contact open
30 32 34
21-22
31-32
13-14
90
Ident. No. 12
1 NO + 2 NC
3SE5 1..-.LH60
0
14 32 22
13 31 21
NSC0_00768
20
32
NSC0_00872a
40
13-14
31-32
21-22
90
Ident. No. 12
vmax = 1.5 m/s

Minimum torque
Fork levers1)

1 NO + 1 NC
13/56
21
NSC0_00916
60
13-14
21-22
90
3SE5 1..-.LA00 + head2)
1 NO + 2 NC
14 32 22
vmax = 1.5 m/s

Minimum torque
1)
3SE5 1..-.CT11
22
Ident. No. 11
NSC0_00905
14
13
49,5
30
The fork levers can be used only with snap-action

contacts.
13 31 21
NSC0_00768
19
NSC0_00767
3SE5 1..-..T1.
NSC0_00917
55 60
13-14
21-22
31-32
90
Ident. No. 12
2)

Limit Switches

Operating point acc. to EN 50041/47

(snap-action)
vma

1 NO + 1 NC
19
22
14
30
44 ... 114
21
3SE5 1..-.BH50
13
NSC0_00769
3SE5 1..-..H5.
NSC0_00912
30 32
21-22
13-14
90
Ident. No. 11
3SE5 1..-.KA00 + head2)
NSC0_00914
0
NSC0_00770
22 32 14
NSC0_00928
14
13
3SE5 1..-.CH50, -.CH51
22
21
NSC0_00913
32
20
13-14
21-22
90
Ident. No. 11
1 NO + 2 NC
21 31 13

1 NO + 1 NC
NSC0_00767
Contact closed
Contact open
30 32
21-22
31-32
13-14
90
Ident. No. 12
1 NO + 2 NC
3SE5 1..-.LH50
0
14 32 22
13 31 21
NSC0_00768
Contact closed
Contact open
20
32
NSC0_00915
13-14
31-32
21-22
90
Ident. No. 12
0
vmax = 1.5 m/s
Minimum torque
Rod actuators1), type D
113 ... 203
13
NSC0_00912
30 32
21-22
13-14
90
Ident. No. 11
3SE5 1..-.KA00 + head2)
NSC0_00914
0
NSC0_00890
NSC0_00770
22 32 14
21 31 13
13
3SE5 1..-.CH80, -.CH82
22
21
NSC0_00913
32
20
13-14
21-22
90
Ident. No. 11
1 NO + 2 NC
11
14
NSC0_00767
21
14

1 NO + 1 NC
30 32
21-22
31-32
13-14
90
Ident. No. 12
3SE5 1..-.LA00 + head2)
1 NO + 2 NC
14 32 22
13 31 21
NSC0_00768
22
3SE5 1..-.BA00 + head2)
1 NO + 1 NC
NSC0_00769
3SE5 1..-..H8.
NSC0_00915
20
32
13-14
31-32
21-22
90
Ident. No. 12
0
vmax = 1.5 m/s
Minimum torque
Spring rods
Deflection of spring rod

1 NO + 1 NC
The spring rods can be used only with snap-action
contacts.
21
NSC0_00873a
13-14
21-22
7
15
14 32 22
NSC0_00891
13 31 21
NSC0_00768
242,3
142,3
3SE5 1..-.LA00 + head2)

NSC0_00874a
0
1 NO + 2 NC
13-14
31-32
21-22
7
15
Ident. No. 12
1)
2)

13
3SE5 1..-.CR01
Ident. No. 11
0
vmax = 1 m/s
22
75,8
14
NSC0_00767
3SE5 1..-..R0.
13/57
Limit Switches
SIRIUS
General data
Dimensions of the basic switches
5 22
7,7
12,5
NSC0_00752
6,9
4
60
78
NSC0_00907
4x5
33
5,4
6
40
15,3
37,3
5,5
100
NSC0_00754
M20x1,5
15,3
37,8
20
56
26
M20x1,5
M20x1,5
20
NSC0_00804a
60
78
78
40
12
16,3
30
0
16,3
16,3
30
5,4
M26x1,5
13,5
7,7
13,5
7,7
7,7
12,5
15,3
37,3
M20x1,5
XL enclosure, width 56 mm,

with M20 1.5 connecting thread
3SE5 162
Enclosure width 56 mm,

3SE5 122
Enclosure width 40 mm, EN 50041,

with 6-pole connector socket
3SE5 115
40,5
NSC0_00753a
5,5
22
NSC0_00939
15
16,3
30
30
40,5
5,3
6,9
13
5,3
53
40
42
50

3SE5 112, 3SE5 132
18,5
M20x1,5
M12x1
4,4
4
20
22
4x6

rear with fixing holes
3SE5 242

3SE5 242
4,3
5 22
4x6
7,7
12,5
33
4x5
7x3
NSC0_00906
15
M20x1,5
NSC0_00751
31
22
42,8
68
7x3
35,9
13
12,5
13
7,7
Contact block
(integrated)
20
22
Contact block
(replaceable)
13
4,3

with M12 connector socket
3SE5 234, 3SE5 212

rear with fixing holes
3SE5 232, 3SE5 212

3SE5 232, 3SE5 212
56
5,5
15,3
37
Operating mechanisms for basic switches,

see pages 13/59 and 13/60..
13/58
12/8

Siemens IC 10 2012
Limit Switches
SIRIUS 3SE5 Mechanical Position
Switches

General data
Operating mechanisms for enclosure width 31 mm and 50 mm

Roller plunger with central fixing
SW24
NSC0_00792a
24
13
0
34
24
Operating mechanism for enclosure width 40 mm and 56 mm

Plain plunger
Rounded plunger, type B acc. to EN 50041
37
Roller plunger, type C acc. to EN 50041

5
NSC0_00756
28,5
38,5
13
15,5
25,5
NSC0_00755
NSC0_00940
5,5
11,5
24
10
10
23
20,8
23
32
7,2
23,65
30
13
19
0
23
Twist lever, roller 30 mm
30
7,2
23,65
20,8
22,5
NSC0_00788
8,5
17
30,4
NSC0_00789a
13
4
R1
8,5
8,5
13
26,5
35,9
42,4
Angular roller lever
8,5
14,7
NSC0_00785
18
23
Roller lever, type E acc. to EN 50047
4,8
24
10
4,8
11,5
NSC0_00786
10
NSC0_00787
Roller plunger, type C acc. to EN 50047
23
0
23
Angular roller lever
50,5
13

39
49,5
24
13
12
NSC0_00761a
7,2
41
24
7,2
Twist lever, rubber roller 50 mm

39
50
50
23,65
27
7,2
44,4
13
NSC0_00766a
24
24
13
27
44,4
NSC0_00825a
24
0
40
23,65
27
13
24
24
24
7,2
23,65
NSC0_00765a
7,2
49,5
23,65

23
45
39
19
24
24
Fork lever, roller 19 mm
52,4
47
39
23,65
30
23,65
NSC0_00760a
11
23
27
13
NSC0_00820a
12,5
Twist lever, 2 rollers 19 mm

19
3
NSC0_00758
R3
43
39
19
24
12
11
22
0
NSC0_00757
R2
12
22
41
19,8
40
Roller lever
24
8,6
46,4
13/59
Siemens IC 10 2012
12/9
Limit Switches
SIRIUS
General data
Operating mechanisms for all enclosure widths
Twist lever, adjustable length,
roller 19 mm

with grid hole, roller 19 mm
19

roller 30 mm
19
7.2
30
7.2
7.2
12
24
24
12
Spring rod, length 142.5 mm
50
24
150
242.3
42.3
NSC0_00759
42.3
24
13
NSC0_00763
12
24
NSC0_00791
33.5
28.5
11
Spring rod, length 242.5 mm
50
142.3
113 ... 203

200
33
39
12
50
25.65
24
12
Rod actuator
13
8.6
124.5
16
24
33
39
124.5
25.65
NSC0_00827
13
24
NSC0_00826a
124.5
16
50
8.6
75 ... 129
75 ... 129
25.65
32
37

with grid hole, rubber roller 50 mm
50
7.2
13
NSC0_00793a
16
114.5
24

rubber roller 50 mm
50
24
12

roller 50 mm
32
37
24
13
NSC0_00819a
109
NSC0_00764a
44 ... 114
0
25.65
24
12
16
76 ... 129.5
24
32
37
25.65
24
109
21.5
29.8
38
45.3
53
60.7
68.4
76.1
83.8
91.5
13
13
NSC0_00762a
16
16
24
44 ... 114
32
37
25.65
55 ... 119
24
NSC0_00790
42.3
75.8
23.5
10
24
13/60
12/10

Siemens IC 10 2012
Limit Switches
SIRIUS 3SE5SIRIUS
Mechanical
Position
Switches
3SE5 International Limit Switches
General data
Circuit diagrams
Enclosure widths 31, 40, 50 and 56 mm
21 31 13
22 36 18
NSC0_00770
22 32 14
21 35 17
13
21
1 NO + 2 NC
3SE5 ...-.L...
1 NO + 2 NC with make-beforebreak, 3SE5 ...-.M...
1 NO + 2 NC
3SE5 ...-.K..., -.Q...
22
NSC0_00767
21 33 13
14
14 32 22
13 31 21
NSC0_00768
13
NSC0_00934
21
22 34 14
NSC0_00935
14
NSC0_00769
22
1 NO + 1 NC
3SE5 ...-.C..., -.F..., -.G..., -.H..., -.N...
2 NO + 1 NC
3SE5 ...-.P...
1 NO + 1 NC
3SE5 ...-.B..., -.R...
XL enclosures, width 56 mm
21 35 17
44
51
43
14
22
13
21
34
42
33
41
NSC0_00938
51 65 47
52
NSC0_00767
21 35 17
22 36 18
NSC0_00941
43
52 66 48
NSC0_00935
51
22 36 18
NSC0_00936
13
44
NSC0_00935
21
52
NSC0_00941
14
NSC0_00769
22
2 x (1 NO + 1 NC)
3SE5 162-0C...
For slow-action contacts

1 NO + 2 NC with make-beforebreak, 1 NO + 1 NC, 3SE5 162-0E...
2 x (1 NO + 2 NC) with makebefore-break, 3SE5 162-0D...
2 x (1 NO + 1 NC)
3SE5 162-0B...
3SE5 connector assignment

M12 connector socket, 4-pole
3SY3 127
2

3SY3 128
Connector sockets, 6-pole + PE

3SY3 131
PE
NSC0_00929
NSC0_00821

3SY3 134
2
3
4
NSC0_00822
2
7
8
6
5
4
NSC0_00823
Order No.
Connector
sockets
Contacts
LEDs
Connections
Type
Version
Version
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
PE
1 NO + 1 NC
21
22
13
14
1 NO + 1 NC
21
22
13
14
PE
2 NC
21
22
31
32
2 NC
21
22
31
32
PE
3SE5..4-1C...-1AF3 3SY3 128
1 NO + 1 NC
snap action
2 LEDs
21
22
13 /
LED gn
14 /
LED ye
Ground
LED
3SE5..4-1B...-1AF3 3SY3 128
1 NO + 1 NC
slow-action
2 LEDs
21
22
14 /
LED gn
13/
LED ye
Ground
LED
3SE5..4-1L...-1AD4 3SY3 134
1 NO + 2 NC
snap action
2 LEDs
21
22
13 /
LED gn
14 /
LED ye
31
32
Ground
LED
PE
3SE5..4-1K...-1AD4 3SY3 134
1 NO + 2 NC
slow-action
2 LEDs
21
22
14 /
LED gn
13/
LED ye
31
32
Ground
LED
PE
1 NO + 1 NC
21
22
13
14
1 NO + 2 NC
21
22
13
14
31
32
3SE5..5-.C...-1AF2 3SY3 131
1 NO + 1 NC
snap action
2 LEDs
21
22
13 /
LED gn
14 /
LED ye
Ground
LED
3SE5..5-.B...-1AF2 3SY3 131
1 NO + 1 NC
slow-action
2 LEDs
21
22
14 /
LED gn
13 /
LED ye
Ground
LED
3SE5..5-.L...-1AD2 3SY3 131
2 NC
snap-action
2 LEDs
21
22
31
32
13 /
LED gn
Ground
LED
3SE5..5-.K...-1AD2 3SY3 131
2 NC
slow-action
2 LEDs
21
22
31
32
14 /
LED gn
Ground
LED
3SE5..4-0....-1AC4 3SY3 127

3SE5..4-0....-1AC5 3SY3 128
3SE5..4-0....-1AE0 3SY3 127
3SE5..4-0....-1AE1 3SY3 128
Connector sockets, 6-pole + PE
3SE5..5-0....-1AD0 3SY3 131

3SE5..5-0....-1AD1 3SY3 131
gn Green
ye Yellow

Connected
Not available
13/61
Siemens IC 10 2012
12/11
12
M12 connector sockets (4-, 5- or 8-pole)
Limit Switches
3SE03 North American Limit Switches

General Information
Features
Modular plug-in
Features
UL Listed, CSA Certified.
UL File: E47512
All Metal Captive Screws.
Keyed, Four-Directional Head.
Steel-Reinforced Diaphragm
Seal Between Operational
Head And Switch Body.
Permanent Instructions for
Adjusting Operational Head.
Modular, Plug-In Housing
1.Heavy-Duty, Bifurcated,
Plug-In Prongs.
2.Ample Receptacle Wiring
Space with 1/2 - NPT
threaded conduit opening.
3.Stepped Terminals On
Single Pole; Deep Center
Trough On Double Pole.
NEMA Type 6P Submersible
1.Completely Sealed With
Epoxy.
2.SOOW-A Cable or Prewired
Receptacle With Pin
Connector.
3.Factory wired cable features
a 350 pound pullput
capacity.
Rotary heads are field
convertible CW, CCW, or both
without special tools.
Prewired receptacle
with pin connector
Design
Modular Plug-In Housing
These heavy duty plug-in limit
switches may be provided as
complete devices using a
composite catalog number; or,
separately as components;
operating head, plug-in module
and base receptacle.
Example:
Complete Switch:
3SE03-AR1
Single Pole, Double Throw
contacts with Side Rotary,
Momentary Head
Components
3SE03-SA
Single Pole, Double Throw
Plug-in Module
3SE03-DR1
Side Rotary Head,
Momentary
3SE03-RA
Standard, Single Pole
Receptacle, 1 NO + 1 NC
Since components may be
interchanged, operating heads,
plug-in modules and
receptacles may be combined
to satisfy most of your everyday
limit switch requirements. This
leads to less inventory with
greater flexibility.
Operating heads include side
rotary; plain and roller plunger;
and, wobble. A variety of levers
are available.
The zinc die-cast housing has an
epoxy finish to protect against
corrosion. All screws on the
module and head are captive.
Prewired cable
NEMA Type 6P Submersible

These heavy duty prewired,
factory sealed switches meet the
demanding enclosure
requirements of UL (NEMA) Type
3, 4, 4X, 6P, 12, and 13. They are
intended for wet environments
where the integrity of the
threaded conduit and switch
body seals must be assured.
The switch body cavity including
threaded conduit entry is
completely sealed with epoxy.
An 8 foot, 5 or 9 conductor
SOOW-A cable; or 5 or 9 pin
prewired receptacle with pin
connector is provided as
standard.
Switches are provided as
complete devices using
composite catalog numbers; or,
separately as components;
operating head and switch body.
UL (NEMA) Type 6P switches are
designed to provide a degree of
protection against the entry of
water during prolonged
submersion at limited depths
(tested with a 6 foot head of
water for 24 hours).
Both the Modular Plug-in and the
(NEMA) Type 6P Submersible
styles provide 60 Amp make and
6 Amp break120V AC and 10
Amp continuous current for 120,
240, 480 and 600V AC. The
circuit contact configuration
depends on the device selected
and the application criteria.
Switches are available with
momentary or maintained
operating heads; and, single
pole, double pole or center
neutral (modular, plug-in only)
contact configurations.
3SE03 limit switches offer a new
standard of reliability and quality
in automatic control circuits
under heavy duty applications.
Plug-in module and

receptacle are keyed.
13/62

Limit Switches

Modular, plug-in and
NEMA type 6P submersible
Technical data
Type
Modular, Plug-in and NEMA Type 6P Submersible
Mechanical life
Side rotary: 13 x 106 make-break operations minimum

All others: 10 x 106 make-break operations minimum
Single Pole: 1 x 106 operations typical at full load
Double Pole: 1 x 105 operations typical at full load
Electrical life
8 x 103 make-break operations per hour (maximum)

Side operated: 0.0012 in. (modular, plug-in housing)
Side rotary: 0.0014 in. (modular plug-in). Top operated: 0.0003 in. (modular, plug-in housing)
1/2 in.-NPT, Prewired Cable or Prewired Receptacle with Pin Connector
Switching frequency
Operating point accuracy
Cable entry
Without Cable: 10 to +121C, 14 to 250F

With Cable: 10 to +105C, 14 to 221F
NEMA Type 1, 3, 3S, 4, 4X, 6, 6P, 13; IP67
Ambient temperature
2212 AWG (modular, plug-in housing), single or stranded wire

5 or 9 conductor, 16 AWG yellow jacketed type SOOW-A cable (prewired cable)
5 or 9 pin, 0.87 in. (22 mm) diameter receptacle (prewired receptacle with pin connector)
Any position
Switch body screws: 2530 lb-in.
Operating head screws: 1418 lb-in.
Conductor size
Mounting
Tightening Torque
NEMA rating
DC,
NEMA R300
AC,
NEMA A600
Maximum current at
125V
250V
120V
240V
480V
600V
Make
Break
0.22A
0.22A
0.11A
0.11A
60A
6A
30A
3A
15A
1.5A
12A
1.2A
Max. volt-ampere
Make
Break
28VA
28VA
28VA
28VA
7200VA
720VA
7200VA
720VA
7200VA
720VA
7200VA
720VA
Rated thermal current

Rated operating voltage
DC, 1A
DC, 300V
AC, 10A
AC, 600V
Operating temperature 1) 2)
Operation
Temperature rating
Temperature range
Type
Return
Momentary CW only
1
Side rotary )
or CCW only
Center neutral
Momentary CW or CCW
Side rotary
Maintained
2
Side plunger
Momentary
Two-sided plunger
Maintained
Roller side plunger4)
Momentary
Top plunger
Momentary
3
Top roller plunger4)
Momentary
Wobble head
Momentary
1) Temperature ranges below
3) For CW only or CCW only
operation, upper temperature
+32F (0C) are based on
limit increases to 250F
absence of freezing moisture
(121C) without cable, and
or water.
221F (105C) with pre-wired
2) For temperature rating of
cable.
specific switch, refer to page
4) Roller direction can be
13/70, Operating Heads.
converted in the field.
3

Without cable
With cable
10F to 200F
-12C to 94C
10F to 200F
-12C to 94C
14F to 200F
-10C to 94C
14F to 200F
-10C to 94C
14F to 250F
-10C to 121C
14F to 221F
-10C to 105C
13/63
Limit Switches

Modular, plug-in metal housing
Complete switches without lever - threaded cable entry:
Plug-In module type
Standard single pole

1 NO + 1 NC
(3SE03-SA)
Standard double pole

2 NO + 2 NC
(3SE03-SB)
Single pole
(3SE03-RA)
Double pole
(3SE03-RB)
Receptacle type
surface mount
Operating head type

Standard momentary
(3SE03-DR1)
Side rotary
CW and CCW operation
convertible to CW only
or CCW only
Plain side plunger

Roller side plunger
Two-sided plunger
Plain top plunger
Roller top plunger
Wobble head (without lever)
Composite catalog number consisting of

head, module and receptacle
Catalog
Catalog
List Price $
DT
DT
1 unit
Number
Number
}
3SE03-AR1
3SE03-BR1
Standard maintained
(3SE03-DM1)
3SE03-AM1
3SE03-BM1
Low torqued momentary

(3SE03-DL1)
3SE03-AL1
Momentary
(3SE03-DS1)
3SE03-AS1
Momentary
(3SE03-DS3)
3SE03-AS3
3SE03-BS3
3SE03-AH1
3SE03-BH1
3SE03-AT1
3SE03-BT1
Maintained
(3SE03-DH1)
Momentary
(3SE03-DT1)
Momentary
(3SE03-DT3)
Momentary
(3SE03-DW1)
List Price $
1 unit
3SE03-BL1
3SE03-BS1
3SE03-AT3
3SE03-BT3
3SE03-AW1
3SE03-BW1
Center neutral
Double pole
2 NO + 2 NC
(3SE03-SN)
Plug-In module type
Center neutral
(3SE03-RB)
Receptacle type
surface mount
CW
CCW
Composite catalog number

consisting of head, module and receptacle
Operating head type
Side rotary
(momentary)
5 pretravel to operate contacts.
13/64
DT
Center
(3SE03-DN1)
Neutral
(3SE03-DN2)
}
}
Catalog Number
3SE03-NN1
3SE03-NN2
List Price $
1 unit
15 pretravel to operate contacts.

Limit Switches

NEMAtype 6P submersible, prewired cable
Complete switches without lever - prewired cable:
Switch body typeprewired cable with 8 foot cable
Single pole
1 NO + 1 NC
(3SE03-SA6P)
Double pole
2 NO + 2 NC
(3SE03-SB6P)
Cable color code

1 - White
2 - Black
3 - Red
4 - Orange
5 - Green
Cable color code

1 - White
6 - Pink
2 - Black
7 - Yellow
3 - Red
8 - Blue
4 - Orange
9 - Green
5 - Brown
Composite catalog number consisting of head and switch body

Operating head type
DT
Standard momentary
(3SE03-DR1)
Side rotary
convertible to CW only or CCW
only
Plain side plunger

Roller side plunger
Two-sided plunger
Plain top plunger
Roller top plunger

Catalog
Number
List Price $ Catalog

1 unit
Number
3SE03-AR16P
3SE03-BR16P
Standard maintained
(3SE03-DM1)
3SE03-AM16P
3SE03-BM16P

(3SE03-DL1)
3SE03-AL16P
3SE03-BL16P
Momentary
(3SE03-DS1)
3SE03-AS16P
3SE03-BS16P
Momentary
(3SE03-DS3)
3SE03-AS36P
3SE03-BS36P
Maintained
(3SE03-DH1)
3SE03-AH16P
Not available
Momentary
(3SE03-DT1)
3SE03-AT16P
3SE03-BT16P
Momentary
(3SE03-DT3)
3SE03-AT36P
3SE03-BT36P
Momentary
(3SE03-DW1)
3SE03-AW16P
3SE03-BW16P
List Price $
1 unit
13/65
Limit Switches

NEMAtype 6P submersible,
prewired receptacle
Complete switches without lever - prewired receptacle with pin connector:
Single pole
1 NO + 1 NC
(3SE03-SA6PC)
Switch Body Typeprewired receptacle with pin

connector
Double pole
2 NO + 2 NC
(3SE03-SB6PC)
Composite catalog number consisting of head and switch body

Operating head type
DT
Standard momentary
(3SE03-DR1)
Side rotary
convertible to CW only or CCW
only
Plain side plunger

Roller side plunger
Two-sided plunger
Plain top plunger
Roller top plunger
13/66
Catalog
Number
List Price $ Catalog

1 unit
Number
3SE03-AR16PC
3SE03-BR16PC
Standard maintained
(3SE03-DM1)
3SE03-AM16PC
3SE03-BM16PC

(3SE03-DL1)
3SE03-AL16PC
3SE03-BL16PC
Momentary
(3SE03-DS1)
3SE03-AS16PC
3SE03-BS16PC
Momentary
(3SE03-DS3)
3SE03-AS36PC
3SE03-BS36PC
Maintained
(3SE03-DH1)
3SE03-AH16PC
Not available
Momentary
(3SE03-DT1)
3SE03-AT16PC
3SE03-BT16PC
Momentary
(3SE03-DT3)
3SE03-AT36PC
3SE03-BT36PC
Momentary
(3SE03-DW1)
3SE03-AW16PC
3SE03-BW16PC
List Price $
1 unit

Limit Switches

Components:
Plug-in module
Plug-in
module
List Price $
Catalog Number 1 unit
DT
Standard single pole 1 NO + 1 NC
3SE03-SA
Standard double pole 2 NO + 2 NC
3SE03-SB
Center neutral 2 NO + 2 NC
3SE03-SN
List Price $
Catalog Number 1 unit
Receptacle for plug-in module

Receptacle
3SE03-RA
Single pole 1 NO + 1 NC (5 terminals)
3SE03-RB
Single pole 2 NO + 2 NC (9 terminals)
Switch body_NEMA type 6P submersible:

Prewired cable 8 foot length
Prewired
cable
Switch body
DT
}
Single pole 1 NO + 1 NC
Prewired
receptacle
Catalog
Number
List Price $
1 unit
Prewired receptacle with pin

connector
Catalog
List Price $
Number
1 unit
DT
3SE03-SA6P
3SE03-SB6P
3SE03-SA6PC
3SE03-SB6PC
Operating heads :
Nominal operating data

Total
travel
Minimum Operating
Operating Release return
temp
Pretravel force
position force
range
Standard momentary
90
3 lb-in.
4.5 oz-in.
3SE03-DR1
90
15
1.5 lb-in.
2.5 oz-in.
3SE03-DL1
Standard maintained
90
50
3 lb-in.
50
3SE03-DM1
Plain side
plunger
Momentary
0.25 in. 0.065 in.
4 lbs
0.03 in.
8 oz.
3SE03-DS1
Roller side
plunger
Momentary
0.25 in. 0.065 in.
4 lbs
0.03 in.
8 oz.
3SE03-DS3
Two-sided
plunger
Maintained
0.32 in. 0.2 in.
5 lbs
0.13 in.
5 lbs
3SE03-DH1
Plain top
plunger
Momentary
0.28 in. 0.04 in.
4 lbs
0.02 in.
8 oz.
3SE03-DT1
Roller top
plunger
Momentary
0.28 in. 0.04 in.
4 lbs
0.02 in.
8 oz.
3SE03-DT3
Wobble
head
Momentary
15
10
2 lb-in.
2.4 oz-in.
3SE03-DW1
Center
neutral
Momentary
90
1.8 lb-in.
2.5 oz-in.
90
15
1.8 lb-in.
2.5 oz-in.
}
}
3SE03-DN1
Operating head type

Side rotary
For use with 3SE03-DN1, -DN2 operating heads and

3SE03-RB receptacle only.
For use with modular, Plug-in and NEMA Type 6P.

Refer to Operating Temperature, Catalog page 13/118

for Temperature Ranges.
Without Operating Levers.
CW and CCW operation. Convertible to CW or CCW operation only.
DT
Catalog
Number
List
Price $
1 unit
3SE03-DN2
ConvertibleHorizontal to Vertical.
Requires Lever.
For use with 3SE03-SN plug-in module only.
13/67
Limit Switches

Modular, plug-in metal housing
Levers for plug-in and non-plug-in versionsmost widely used
Length
Roller
mounted on Roller
side of lever material
Roller
face
Roller
diameter width
Max required
return torque
(oz-in.)
1.5 (38)
Front
Nylatron
0.75 (19)
0.31 (8)
0.53
Roller crank 1.5 (38)

lever
1.5 (38)
Front
Cast aluminum 0.75 (19)
0.31 (8)
1.10
Back
Cast aluminum 0.75 (19)
0.31 (8)
1.10
Fork lever
1.5 (38)
Back / back
Nylatron
0.75 (19)
0.31
Adjustable
radius
lever
13.5 (2589) Front
Nylatron
0.75 (19)
13.5 (2589) Front
Metal
0.75 (19)
Rod lever
9 (229)
Stainless steel
Adjustable
spring rod
12.125 (308)
Description
Flexible loop 6 (152)

lever
Levers
DT
List
Price $
1 unit
Catalog
Number
3SX03-KL200
}
}
}
3SX03-KL355
3SX03-KL204
0.31 (8)
1.90
3.40
}
}
3SX03-KL201
0.31 (8)
7.00
3SX03-KL220
Nylon
3.50
3SX03-KL556
Nylatron
0.40
3SX03-KL142
3SX03-KW2
3SX03-KW4
Rod
Nylon
Coil spring
Coil spring
3SX03-KL579
3SX03-KL538
For plunger
actuated
switches
wobble
actuators
Levers for plug-in and non-plug-in versions:

Roller
Operator
Standard lever
Length
Type
Diameter
0.87 (22)
Metal
0.75 (19)
0.31 (8)
0.62
1.37 (35)
Metal
0.75 (19)
0.31 (8)
0.95
0.75 (19)
0.69 (17)
1.00 (25)
0.25 (6)
0.92
0.77
0.32
1.50 (38)
Nylatron
Ball bearing
Without roller
Nylatron
Nylatron
Metal
Ball bearing
0.75 (19)
0.75 (19)
0.75 (19)
0.69 (17)
0.31 (8)
1.00 (25)
0.31 (8)
0.25 (6)
0.71
1.45
1.5
1.1
Nylatron
Nylatron
Nylatron
Metal
Ball bearing
0.75 (19)
0.75 (19)
1.5 (38)
0.75 (19)
0.69 (17)
0.31 (8)
1.00 (25)
0.28 (7)
0.31 (8)
0.25 (6)
1.0
1.8
1.4
2.0
1.5
Nylatron
Nylatron
Nylatron
Metal
Ball bearing
0.75 (19)
0.75 (19)
1.5 (38)
0.75 (19)
0.69 (17)
0.31 (8)
1.00 (25)
0.28 (7)
0.31 (8)
0.25 (6)
1.3
2.3
1.8
2.5
1.8
}
}
}
}
2.00 (51)
250 (64)
Cast aluminum
3.00 (76)
All dimensions shown in inches and (millimeters).

For reference purposes only. Not to be used for design or construction purposes.
Roller lever: Length from the operating shaft axis to the
roller axis.
All other: Length from the operating shaft axis to the tip.
13/68
Catalog Number
Max required
return torque
Face (width) (oz-in.)
Stainless
steel
}
}
_
_
_
_
}
}
_
_
_
_
_
_
_
CautionWhen selecting lever, required return torque

should not exceed minimum return torque in operating
head.
Cap screw accommodates 3/64 inch Allen wrench.
By re-assembling lever minimum can be reduced another 0.50 (13).
DT
Cast
aluminum
List
Price $
1 unit
3SX03-KL39
3SX03-KL40
3SX03-KL337
3SX03-KL531
3SX03-KL32
3SX03-KL546
3SX03-KL572
3SX03-KL549
3SX03-KL552
3SX03-KL547
3SX03-KL573
3SX03-KL575
3SX03-KL550
3SX03-KL553
3SX03-KL548
3SX03-KL574
3SX03-KL576
3SX03-KL551
3SX03-KL554
Applies when lever extended to maximum dimension.

See dimensions page 13/76.

Limit Switches

Levers for plug-in and non-plug-in versionsmost widely used
Length
Inches (mm)
Type
Min.
Catalog Number
required
Diameter Face width return torque
Stainless Cast
In. (mm) in. (mm)
steel
aluminum
oz-in
DT
1.50 (38)
Nylatron
0.75 (19)
0.31 (8)
0.53
Nylatron
1.5 (38)
0.28 (7)
0.96
Ball bearing
0.69 (17)
0.25 (6)
0.77
Nylatron
0.75 (19)
0.31 (8)
0.65
Metal
0.75 (19)
0.31 (8)
1.20
Ball bearing
0.69 (17)
0.25 (6)
0.90
1.50 (38)
Nylatron
0.75 (19)
0.31 (8)
0.65
outboard roller
Metal
0.75 (19)
0.31 (8)
1.20
Ball bearing
0.69 (17)
0.25 (6)
0.90
Nylatron
0.75 (19)
1 (25)
1.10
Bantam lever 0.69 (18)
Metal
0.88 (22)
0.19 (5)
0.45
Precision
adjustment
Nylatron
0.75 (19)
0.31 (8)
0.65
Metal
0.75 (19)
0.31 (8)
1.20
Ball bearing
0.69 (17)
0.25 (6)
0.90
3SX03-KL535
13.75 (2595)
Nylatron
0.75 (19)
0.5 (13)
1.90
3SX03-KL599
13.75 (2595)
Nylatron
0.75 (19)
1 (25)
3.10
1.623.75 (4195)
Nylatron
1.5 (38)
0.28 (7)
2.50
3SX03-KL443
0.503.75 (1395)
Large nylatron 4 (102)
0.11 (3)
4.50
}
}
13.75 (2595)
Ball bearing
0.69 (17)
0.25 (6)
2.50
0.503.75 (1395)
Without roller
1.20
Fork lever _
both rollers
one side
1.50 (38)
Nylatron
0.75 (19)
1 (25)
Metal
0.75 (19)
0.31 (8)
Ball bearing
0.69 (17)
0.25 (6)
Fork lever _
both rollers
outside, one
side
1.50 (38)
Nylatron
0.75 (19)
Metal
0.75 (19)
Ball bearing
0.69 (17)
Roller
Operator
List
Price $
1 unit
Roller levers
Cast aluminum
Stainless steel
Roller on
reverse side
Offset lever
1.50 (38)
(Inboard roller Inboard roller
shown)
1.50 (38)
Adjustable
roller
}
}
3SX03-KL310
3SX03-KL536
3SX03-KL580
3SX03-KL24 _
3SX03-KL25 _
3SX03-KL26 _
3SX03-KL27 _
3SX03-KL28 _
3SX03-KL29 _
3SX03-KL30 _
3SX03-KL532
3SX03-KL340
3SX03-KL465
3SX03-KL537
3SX03-KL598
3SX03-KL539
3SX03-KL31
3SX03-KL543
3SX03-KL545
0.31 (8)
3SX03-KL203
0.31 (8)
3SX03-KL541
0.25 (6)
3SX03-KL542
3SX03-KL544
Levers for plug-in and non-plug-in versions:

Length
Inches (mm)
Description
Inches (mm)
Min. required
return force
oz-in.
Adjustable rod
5.50 (140) Max.

5.50 (140) Max.
8.75 (222) Max
12 (305) Max.
_
_
Nylon Rod0.19 (5) Dia.

Metal Rod0.12 (3) Dia.
Metal Rod (Square)0.12 (3) Max.
Steel (Formable) Rod0.12 (3) Dia.
Clamp Only0.19 (5) Hole
Clamp Only0.12 (3) Hole
0.40
0.92
2.20
5.00
_
_
Spring rod
11.62 (295)
Metal rod
2.80
Adjustable wire
12.12 (308)
max.
Nylon covered wire
1.50
3SX03-KL533
Adjustable wide roller 3.9 (99)

lever
0.75 (19) Dia. Nylatron Roller
4.50
3SX03-KL37
Stainless steel rod
Rod diameter - 0.06 (2)
3SX03-KW3
Operator
DT
}
}
}
}
}
Catalog
Number
List
Price $
1 unit
3SX03-KL399
3SX03-KL202
3SX03-KL581
3SX03-KL226
3SX03-KL35
3SX03-KL36
3SX03-KL421
0.19 (30) Dia. Rod
Wobble head operators

See dimensions page 13/76
Length from operating shaft axis to the roller axis.

Maximum dimensions, precision adjustable to lesser
dimensions.
By re-assembling lever minimum can be reduced by 1/2 in.

Applies when lever extended to maximum dimension.

CautionWhen selecting lever, required return torque should
not exceed minimum return force in operating head.
All dimensions shown in inches and

(millimeters). For reference purposes
only. Not to be used for design or
construction purposes.
13/69
Limit Switches

Wiring diagrams
Single Pole
1 NO - 1 NC
Cable color code

1 - White 6 - Pink
2 - Black 7 - Yellow
3 - Red
8 - Blue
4 - Orange 9 - Green
5 - Brown
Pre-wired cable
Double Pole
1 NO - 1 NC
Modular, plug-in and prewired cable

Red/Blk 1
5 Wht/Blk
Grn/Blk 2
6 Red
Orange 3
7 Black
Blue 4
8 White
7
2
5
8 9
4
Green
Gnd
Prewired receptacle with pin connector
Typical connector cable (supplied by user)

Manufacturers part number
Daniel
Woodhead
Brad Harrison
Cooper
Crouse-Hinds
Molex
(Industrial Interface)
Lumberg USA
3
6
12
9 Pin connector cable
105000A01F030
105000A01F060
105000A01F120
5000111-3_
5000111-4_
5000111-5_
14541
14542
14544
RK50-77/1M
RK50-77/2M
RK50-77/4M
3
6
12
309000A01F030
309000A01F060
309000A01F120
X8990-3
X8990-4
X8990-5
_
_
_
_
_
_
Cable length
ft.
5 Pin connector cable
13/70

Limit Switches

Dimension drawings
Plain side plunger
Roller side plunger
Two side plungers
Plain top plunger
Roller top plunger
Rotary lever operators

Dimensions
Catalog
Number
Dimensions
E
Catalog
Number
3SX03-KL200 1.50
0.44 0.20
(11.2) (5.1)
0.24
(6.1)
3SX03-KL554 3.00
3SX03-KL355 1.50
0.44 0.20
(11.2) (5.1)
0.24
(6.1)
3SX03-KL572 2.00
0.75 0.32
(38.1) (19.0) (8.1)
0.18
(4.6)
0.75 1.00 0.42

0.90
(50.8) (19.0) (25.4) (10.7) (22.9
0.90
(22.9
0.75 1.00 0.44 0.90 0.90 3SX03-KL573 2.50 0.75 1.00 0.42
0.90
(38.1) (19.0) (25.4) (11.2) (22.9) (22.9)
(63.5) (19.0) (25.4) (10.7) (22.9
0.90
(22.9
3SX03-KL377 1.50
3SX03-KL531 1.50
0.44 0.12
(11.2) (3.0)
0.18
(4.6)
3SX03-KL574 3.00
3SX03-KL546 2.00
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
3SX03-KL575 2.50
0.42
0.18
(10.7) (4.6)
0.24
(6.1)
3SX03-KL547 2.50
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
3SX03-KL576 3.00
0.42
0.18
(10.7) (4.6)
0.24
(6.1)
3SX03-KL548 3.00
0.75 0.32
(76.2) (19.0) (8.1)
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
With rollers on reverse side
3SX03-KL549 2.00 0.75 0.32

(50.8) (19.0) (8.1)
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
3SX03-KL310 1.50
0.44
0.34
(11.2) (8.6)
0.38
((9.7)
3SX03-KL550 2.50
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
3SX03-KL536 1.50
0.44
0.30
(11.2) (7.6)
0.38
((9.7)
3SX03-KL551 3.00
0.42 0.20
(10.7) (5.1)
0.24
(6.1)
3SX03-KL579 1.50
0.44
0.34
(11.2) (8.6)
0.38
((9.7)
3SX03-KL552 2.00
0.42 0.12
(10.7) (3.0)
0.18
(4.6)
3SX03-KL580 1.50
0.44
0.25
(11.2) (6.4)
0.31
(7.9)
3SX03-KL553 2.50
0.42 0.12
(10.7) (3.0)
0.18
(4.6)
0.688 0.25
(38.1) (17.5) (6.4)
0.75 0.32
(50.8) (19.0) (8.1)
0.75 0.32
(63.5) (19.0) (8.1)
0.75 0.32
(63.5) (19.0) (8.1)
0.75 0.32
(76.2) (19.0) (8.1)
0.688 0.25
(50.8) (17.5) (6.4)
0.688 0.25
(63.5) (17.5) (6.4)
All dimensions shown in inches and (millimeters). For reference purpose only. Not to be used
for design or construction purposes.

0.42
0.12
(10.7) (3.0)
0.75 0.32
(38.1) (19.0) (8.1)
0.688 0.25
(76.2) (17.5 (6.4)
0.75 1.00 0.42

0.90
(76.2) (19.0) (25.4) (10.7) (22.9
1.50 0.29
(63.5) (38.1) (7.4)
1.50 0.29
(76.2) (38.1) (7.4)
0.75 0.32
(38.1) (19.0) (8.1)
1.50 0.28
(38.1) (38.1) (7.1)
0.75 0.32
(38.1) (19.0) (8.1)
0.688 0.25
(38.1) (17.5 (6.4)
0.90
(22.9
Can accommodate both U.S. 1.16 (29.4) x 2.34 (59.5) and DIN 1.18 (30.0) x
2.36 (60.0) mounting dimensions.
13/71
Limit Switches

Dimension drawings
Fork lever, one roller inside,

one roller outside
Offset roller levers

Catalog
Number
Dimensions
A
Catalog
Number
Outboard roller
3SX03-KL27
0.75 (19)
0.32 (8) 0.03 (1)
3SX03-KL28
0.75 (19)
0.32 (8) 0.03 (1)
3SX03-KL29
0.69 (18)
0.25 (6) 0.04 (1)
3SX03-KL30
0.75 (19)
1.0 (25) _
3SX03-KL24
0.75 (19)
0.32 (8) 0.03 (1)
3SX03-KL25
0.75 (19)
0.32 (8) 0.03 (1)
3SX03-KL26
0.69 (18)
0.25 (6) 0.04 (1)
Fork lever - Both rollers on one side
Dimensions
A
Dimensions
Catalog
Number
3SX03-KL203
0.75 0.32 0.16 0.20 0.73 0.77

(19) (8)
(4)
(5)
(19) (20)
3SX03-KL204
0.75
(19)
0.32
(8)
0.16
(4)
0.20
(5)
3SX03-KL541
0.75 0.32 0.16 0.20 0.73 0.77

(19) (8)
(4)
(5)
(19) (20)
3SX03-KL543
0.75
(19)
1.0
(25)
0.86
(22)
0.86
(22)
3SX03-KL542
0.69 0.25 0.08 0.14 0.64 0.70

(18) (6)
(2)
(4)
(16) (18)
3SX03-KL544
0.75
(19)
0.32
(8)
0.16
(4)
0.20
(5)
3SX03-KL545
0.69
(18)
0.25
(6)
0.08
(2)
0.1
(3)
Inboard roller
Bantam roller lever
Precision adjustment roller lever
Ad j u s t a b l e r o l l e r l e v e r
Dimensions
B
Dimensions
Catalog Number
3SX03-KL340
0.69 (18) 0.75 (19) 0.32 (8)
3SX03-KL465
3SX03-KL535
Catalog Number
0.48 (12) 0.24 (6)
0.28 (7)
3SX03-KL201
0.75 (19)
0.32 (8)
0.29 (7)
0.33 (8)
0.69 (18) 0.75 (19) 0.32 (8)
0.48 (12) 0.24 (6)
0.28 (7)
3SX03-KL443
1.5 (38)
0.29 (7)
0.26 (7)
0.32 (8)
0.69 (18) 0.69 (18) 0.25 (6)
0.48 (12) 0.16 (4)
0.22 (6)
3SX03-KL537
0.75 (19)
0.32 (8)
0.29 (7)
0.33 (8)
3SX03-KL538
0.69 (18)
0.25 (6)
0.21 (5)
0.27 (7)
3SX03-KL539
0.69 (18)
0.25 (6)
0.21 (5)
0.27 (7)
3SX03-KL598
0.39 (10)
0.11 (3)
0.11 (3)
0.19 (5)
3SX03-KL599
0.75 (19)
0.5 (13)
0.46 (12)
0.47 (12)
All dimensions shown in inches and (millimeters). For

reference purposes only. Not to be used for design or
13/72

Limit Switches

Dimension drawings
Nylon Spring Rod Actuator
3SX03-KL556
Nylon Covered Wire Actuator

3SX03-KL533
Stainless Steel Spring Actuator

3SX03-KL421
Adjustable Rod Actuator
Adjustable rod actuators

Adjustable Wire Roller Actuator
3SX03-KL37
Wobble head
with nylon head
3SE03-DW1
3SX03-KW2
Nylatron Loop Actuator

3SX03-KL142
Wobble head
with coil spring
3SE03-DW1
3SX03-KW4
Dimensions
Catalog
Number
Material
3SX03-KL202
Steel-Round
5.50
(140)
0.120
(3)
3SX03-KL581
Steel-Square
8.75
(222)
0.125
(3)
3SX03-KL399
Nylon
5.50
(140)
0.190
(5)
3SX03-KL220
Stainless Steel
9.00
(229)
0.190
(5)
3SX03-KL226
Plated Steel
12.0
(305)
)0.120
(3)
Wobble head
with stainless steel rod
3SE03-DW1
3SX03-KW3
All dimensions shown in inches and (millimeters). For

reference purposes only. Not to be used for design or

13/73
Limit Switches

3SE03 Metal enclosure
Description
Features
1/2" Conduit Entrance
Application
NEMA 1 Enclosed Aluminum

Die Cast Housing
NEMA A600, R300 Contacts
These switches are designed for

accurate repeatability. Their
compact size makes them ideal
for use in space-restricted
areas.
Screw Terminals
Booted versions for added
protection
Overall dimensions
UL Recognized
CSA Certified
INO/INC Snap-action
contacts (form c)
Specifications
DT
Plunger actuator
OF Max. - 8.82 - 12.3 oz.
(250 - 350 g)
RF Min. 4.02 oz. (114 g)
PT Max. - 0.016 in. (0.4 mm)
OT Min. - 0.217 in. (5.5 mm)
MD Max. - 0.002 in. (0.05 mm)
OP - 1.504 in. (38.2 mm)
Typical applications include

overhead, folding and elevator
doors, sliding gates and other
automated equipment.
Catalog
Number
3SE03 - EB05
OF Max. - 28.22 oz. (800 g)

RF Min. 8.46 oz. (240 g)
PT Max. - 0.079 in. (2.0 mm)
OT Min. - 0.197 in. (5.0 mm)
MD Max. - 0.004 in. (0.1 mm)
OP - 1.803 in. (45.8 mm)
3SE03 - EB06
OF Max. - 20.1 oz. (570 g)

RF Min. 6.0 oz. (170 g)
PT Max. - 0.157 in. (4.0 mm)
OT Min. - 0.236 in. (6.0 mm)
MD Max. - 0.016 in. (0.4 mm)
3SE03 - EB32
OF Max. - 22.57 oz. (640 g)

RF Min. 8.11 oz. (230 g)
PT Max. - 0.197 in. (5.0 mm)
OT Min. - 0.236 in. (6.0 mm)
MD Max. - 0.016 in. (0.4 mm)
3SE03 - EB33
List Price $
1 unit
Booted plunger
Roller lever
Booted roller lever
OF = Operating Force
RF = Return Force
PT = Pretravel
OT = Operating Travel
MD = Movement Differential
OP = Operating Position
13/74

Limit Switches

3SE03 Metal enclosure
Dimension drawings
Overall dimensions
Specifications
DT
Catalog Number
Roller plunger
OF Max. - 9.92 - 12.3 oz.
(250 - 350 g)
RF Min. 4.02 oz. (114 g)
PT Max. - 0.02 in. (0.5 mm)
OT Min. - 0.142 in. (3.6 mm)
MD Max. - 0.002 in. (0.05 mm)
OP - 1.957 in. (49.7 mm)
3SE03 - EB07
3SE03 - EB08
List Price $
1 unit
Booted roller plunger

OF Max. - 17.64 oz. (500 g)
RF Min. 3.53 oz. (100 g)
PT Max. - 0.039 in. (1.0 mm)
OT Min. - 0.138 in. (3.5 mm)
MD Max. - 0.006 in. (0.12 mm)
OP - 1.957 in. (49.7 mm)
Technical data
Mechanical Life
Electrical Life
Operating Speed
Cable Entry
3,000,000 operations maximum

500,000 operations minimum
0.01 m/second to 1m/second
1/2" NPT
Temperature Range
-15 to 80 (5 to 176F)
Mounting
Any Position
Degree of Protection NEMA 1

NEMA Rating
A600, R300
Non-Inductive Load (A)

Rated Voltage (V)1)2) Resistive load Lamp load
NO
NC-NO
125 VAC
15
3
250 VAC
500 VAC
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
NC
Inductive load (A)

Inductive load Motor load
NC-NO
NO
NC
1.5
15
2.5
15
2.5
1.25
15
1.5
1.5
0.75
2.5
1.5
0.75
15
1.5
15
2.5
15
1.5
10
2.5
6 (2)
1.5
2.5
0.4
0.4
0.4
0.05
0.05
0.05
0.2
0.2
0.2
0.03
0.03
0.03
Inrush current (A)

NO
NC
30 maximum 15 maximum
1) Inductive load has power

factor of 0.04 minimum (AC)
and a time of 7m/second (DC)
2) Lamp load has an inrush
current of 6 times steady-state
current.

13/75
Mechanical Safety
3SE7 Cable-Operated Switches

General Information
Application
Cable-operated switches are
used for monitoring or for EMERGENCY-STOP facilities on particularly endangered system
sections. They are available with
metal enclosures.
Principle of operation
The switch contacts of the cableoperated switches and the conveyor belt unbalance protection
devices are positive opening.
3SE7 1.0 / 3SE7 310

Molded plastic / metal enclosure
As the effective range of a cableoperated switch is limited by the
length of the pull-wire, large systems can also be protected.
Cable-operated switches (requiring pulling at both ends) and

conveyor belt unbalance trackers are used primarily for
monitoring very long belt systems.
Specifications
Switches with latching for implementation in EMERGENCYSTOP equipment correspond to
the EN 418 standard.
Cable-operated switches with

one-side operation are held in
free position by the pre-tension
force on the turnbuckle.
In the 3SE7 140, -150 and -160

cable-operated switches, both
switching contacts are available for cable-break/cable pull
signaling. The NO contact is
used, for example, for signaling purposes.
For switches with latching, with a

pretensioned cable, the locking
must be deactivated beforehand
in order to return the switch to its
free position.
Technical data
Type
Standards
Certifications
Electrical design
Electrical loading
3SE7 120
3SE7 150
3SE7 140
3SE7 141
IEC 60947-5-1, EN 60947-5-1; IEC 60204-1, EN 60204-1; EN ISO 13850
UL / CSA
Contacts electrically isolated from each other
3SE7 160
at AC-15
minimum
AC 400 V, 6A
AC/DC 24 V, 10 mA
6 A (Slow acting)
> 1 x 106 operating cycles
Fine silver
By pulling or breaking of a rope (cable)
10 m
25 m
AC 250 V, 2A
AC 400 V, 6A
50 m
75 m 1)
2 x 50 m
2.5 m
5m
5m
5m
IP67
1P65
3x(M20x1.5)
2x(M25x1.5)
Short circuit protection

Contact material
Actuation
Rope length, maximum
Spacing between rope
supports, maximum
3m
Enclosure
Cover
acc. To IEC 60529
GDAL alloy, coated (color), dark black RAL 9005

Shock-resistant thermoplastic
Ambient temperature
Mounting
Mounting space
Cable entry
-25C to +70C
Designed for M 5
30 mm and 40 mm
2x(M20x1.5)
Type of connection
M3.5 screw connection; Self-lifting pressure plate terminals
IP65
2x(M20x1.5)
1x(M16x1.5)
3SE7 310
Travel diagrams
3SE7 120-2DD01
3SE7 140-1.F00
3SE7 141-1EG10
3SE7 140-1.D0.
Central position
Central position
Central position
Central position
3SE7 120-1BF00, 3SE7 150-1BF00
3SE7 160-1AE, 3SE7 310-1AE
3SE7 150-1.D00, 3SE7 150-2DD00
13
14
21
22
21-22
13-14
NSC0_006 45
mm
10
Wire tension
Interlock
NSC0_00294a
Central
position
Central position
Central position
Interlock
0
Wire break
Central position
1) 75 m cable length possible provided the ambient temperature range is strictly observed, otherwise, 50 m.
13/76

MechanicalSwitches
Safety
3SE7, 3SF2 Cable-Operated
SIRIUS 3SE7 Cable-Operated Switches

Selection
3SE7 metal enclosures

Version
Wire
length
Contacts
DT Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
Cable-operated switches
Metal enclosures, IP65

(cover made of molded plastic)
10
Without latching, only cable pull

monitoring
1 NO + 1 NC
3SE7 120-2DD01
1 unit
With latching and button reset
2 NC
1 unit
3SE7 120-1BF00
1 NO + 2 NC
3SE7 120-1BH00
1 unit
3SE7 150-2DD00
1 unit
1 unit
1 unit
1 unit
- With yellow lid
3SE7 120-1BH00
(cover made of molded plastic),
with alignment window
25
Without latching
1 NO + 1 NC
1 NO + 1 NC
2 NC
1 NO + 2 NC
1 NO + 1 NC
3SE7 150-1CD00
1 unit
3SE7 150-2DD04
- With yellow lid

With latching and key unlatching
3SE7 150-1BD00
3SE7 150-1BF00
3SE7 150-1BH00
3SE7 150-1BD00
3SE7 150-1BH00
with alignment window,
with LED, red, 24 V DC
25
Without latching
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
2 NC
In addition with LED, red, 24 V DC
1 NO + 1 NC
With latching and key unlatching
1 NO + 1 NC
1 NO + 3 NC
2 NO + 2 NC
1 NO + 1 NC
2 NO + 2 NC
1 unit
3SE7 150-1BD04
1 unit
3SE7 140-1BD00
1 unit
1 unit
1 unit
3SE7 140-1CD00
1 unit
3SE7 141-1EG10
1 unit
3SE7 160-1AE00
1 unit
1 unit
1 unit
3SE7 150-1BD04
(cover made of molded plastic)
50
3SE7 140-1B.00

with EMERGENCY-STOP mushroom,
with rotate-to-unlatch mechanism
75

with actuation on both sides
2 75
3SE7 140-1BF00
3SE7 140-1BD04

3SE7 160-1BD00
3SE7 160-1AE04
3SE7 160-1AE00

Industrial Controls
Catalog
* You can
order this quantity or a multiple thereof.
13/77
Product Category: SFTY
Siemens IC 10 2012
13/101
13
3SE7 141-1EG10
Mechanical
Safety
3SE7,
3SF2 Cable-Operated
Switches

Selection
3SE7 metal enclosures
Version
Contacts
DT Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
Conveyor belt unbalance trackers
2 NO + 2 NC
2 NO + 2 NC
3SE7 310-1AE00
3SE7 310-1AE04
3SE7 310-1AE00
Accessories
Configuration of the cable-operated switches
Short lengths of wire up to 25 m
Wire clamp,
simplex,
oval,
4 mm
3SE7 941-1AC
Wire clamp,
simplex,
oval,
4 mm
3SE7 941-1AC
Wire eye, 4 mm
3SE7 930-1AC
Wire eye, 4 mm
3SE7 930-1AC
Wire,
Wire clamp,
simplex,
4 mm
oval,
3SE7 910
4 mm
3SE7 941-1AC
Turnbuckle
M6 x 60
3SE7 950-1AB
Eyebolt
M8
3SE7 920-1AB
Wire clamp,
simplex,
oval,
4 mm
3SE7 941-1AC
Eyebolt
M8
3SE7 9201AB
NSC0_00288d
SIRIUS
cable-operated
switch
3SE7 120
3SE7 150
Wire eye, 4 mm
3SE7 930-1AC
Wire eye, 4 mm
3SE7 930-1AC
Long lengths of wire up to 50 m
Wire clamp,
simplex,
oval,
4 mm
3SE7 941-1AC
Wire eye, 4 mm
3SE7 930-1AD
Wire clamp,
Wire clamp,
Turnbuckle
simplex,
simplex,
M6 x 60
oval,
oval,
3SE7 950-1AB
4 mm
4 mm
3SE7
3SE7 941-1AC
941-1AC
Wire eye, 4 mm
Wire eye, 4 mm
3SE7 930-1AD
3SE7 930-1AD
Use of a tension spring is essential for lengths of wire
Wire,
4 mm
3SE7 910
Wire clamp,
Tension spring
simplex,
35 N
oval,
3SE7 931-1AD
4 mm
3SE7 941-1AC
Wire roller, rotatable

3SE7 921-1AC
Eyebolt
M10
3SE7 9201AC
Wire eye, 4 mm
3SE7 930-1AD
NSC0_00289f
SIRIUS
cable-operated
switch
3SE7 140
25 m.
Pulling from both sides up to 2 x 75 m
Tension spring
up to 2 x 50 m:
3SE7 931-1AD
up to 2 x 75 m:
3SE7 931-1AE
Eyebolt M10
3SE7 920-1AC
Wire
Wire clamp, Wire clamp,
Turnbuckle
simplex,oval, M6 x 60
clamp,
simplex,
4 mm
oval,
3SE7 950-1AB simplex,
3SE7 941-1AC
oval, 4 mm
4 mm
3SE7
3SE7 941941-1AC
1AC
3SE7 921-1AC
3SE7 921-1AC
Wire eye, 4 mm
3SE7 930-1AD
SIGUARD
cable-operated
switch
3SE7 160
Wire eye, 4 mm
3SE7 930-1AD
Wire
Wire
Tension spring
clamp,
clamp,
up to 2 x 50 m:
simplex,
simplex, 3SE7 931-1AD
oval,
oval,
up to 2 x 75 m:
4 mm
4 mm
3SE7 931-1AE
3SE7
3SE7
941-1AC
941-1AC
Wire rollers, rotatable
3SE7 921-1AC
Wire eye, 4 mm
3SE7 930-1AD
Use of a tension spring is essential for lengths of wire 25 m.
NSC0_00499e
13
Wire, 4 mm
3SE7 910
Note:
Large temperature fluctuations require corresponding compensation springs. For reliable connection the PVC sheath must be
13/78
13/102
Siemens IC 10 2012
removed from the clamping area of the steel trip-wire.

Wire supports must be used at the recommended intervals.
Catalog

Controls
Illustrations areIndustrial
approximate
MechanicalSwitches
Safety
3SE7, 3SF2 Cable-Operated

3SE7 metalAccessories
enclosures
Version
Trip-wire with fixing
Steel wires, with red plastic sheath,

4 mm1)
Wire length/
diameter
DT Order No.
Price per
PU
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
3SE7 910-3AA
10 m
15 m
20 m
50 m
3SE7 910-3AH
1 unit
Oval
2 4 mm
3SE7 941-1AC
1 unit
Simplex (1 set = 4 units)
2 4 mm
3SE7 943-1AC
4 units
Duplex (1 set = 4 units)
2 4 mm
3SE7 944-1AC
4 units
Single (1 set = 4 units)
2 4 mm
3SE7 942-1AA
4 units
3SE7 931-1AB
1 unit
1 unit
3SE7 931-1AE
1 unit
Wire clamps, galvanized white
3SE7 910-3AB
3SE7 910-3AC
Tension springs (zinc-plated)

to maintain the counter tension
13 N
35 N, for trip-wires up to 50 m
> 35 N, for trip-wires up to 2 75 m
Wire rollers for changing the direction of the wire, 4 mm

rotatable
3SE7 921-1AC
1 unit
Fixtures for the wire rollers

(incl. fixing nuts)
3SE7 921-1AA
1 unit
3SE7 930-1AD
4 units
Including M8 nut
A
}
3SE7 920-1AB
Including M10 nut
Wire eyes for changes in wire direction and

improved power transmission at the fixing points
(1 set = 4 units)
4 mm
Eyebolts for fixing the wire
Turnbuckles for precise adjustment of the pretension
1)
1 unit
3SE7 920-1AC
1 unit
3SE7 950-1AB
M6 x 60
1 unit
M6 x 110
3SE7 950-1AD
1 unit
LED lamps, red

24 V DC
25 mm diameter;
for M20 x 1.5 connection
3SX3 235
1 unit
13
Spare parts
3SE7 931-1AD
Diameter including casing; the diameter of the steel wire is 3.2 mm.

Industrial Controls
Catalog
* You can
order this quantity or a multiple thereof.
13/79
Siemens IC 10 2012
13/103
3SE Mechanical Safety
Cable-Operated Switches
Dimension drawings
Metal enclosure
3SE7 120-2DD.., 3SE7 150-2DD..

without latching
Metal enclosure
3SE7 140-1B...
with latching and button reset
Metal enclosure
3SE7 120-1B..., 3SE7 150-1B...

3SE7 140-1ECD.
with latching and key reset
3SE7 150-1CD..
with latching and key reset
3SE7 141-1EG10.
with EMERGENCY STOP and Lockout release
3SE7 160-1AE..
3SE7 310-1AE.. conveyor belt unbalance protection device

13/80

Mechanical Safety
SIRIUS 3SE5, 3SE2 Mechanical Safety Switches
3SE5 Interlock Switches
With Separate Actuator
General data
General data
Overview
Position switches with separate actuator are used where the position of doors, covers or protective grills must be monitored for
safety reasons.
3SE5 position switches with separate actuator have the same
enclosures as the standard switches (modular system).
Operation
The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 90. The
switches can also be approached from above.
The twist actuators of the 3SE2 243 and 3SE2 257 switches
with special enclosures cannot be changed. The switches can
be approached from the two broad sides and from above.
The actuators are not included in the scope of supply of the
position switch and must be ordered separately from various
versions to suit the application (see page 13/86).
The actuator is encoded. Simple overruling by hand or auxiliary
devices is impossible.
Radius actuators
The position switches with radius actuators are particularly suitable for rotatable protective devices. The movable actuation key
allows even small radii to be approached. Damage to the switch
and the actuator due to inaccurate approach is prevented.
Locking devices
A high-grade steel blocking insert for attaching up to eight padlocks is available for even more safety (see page 13/86).
Position switches with head for separate actuator
Design
Enclosure sizes
12
The 3SE5 switches are available in various enclosure sizes:

Plastic enclosures according to EN 50047, 31 mm wide, IP65,
1 cable entry
Metal enclosures according to EN 50047, 31 mm wide,
Plastic and metal enclosures according to EN 50041, 40 mm
wide, IP66/IP67, 1 cable entry
Plastic enclosures, 50 mm wide, IP66/IP67, 2 cable entries
Metal enclosures, 56 mm wide, IP66/IP67, 3 cable entries
Also available is a switch in the 3SE2 series which has arisen in
this form according to general market requirements:
Molded-plastic enclosures outside of the standards, enclosure
width 52 mm, IP67
Enclosure versions
Various basic versions can be selected for the enclosures of the
3SE5 series:
Available with two- or three-pole contact blocks designed as
slow-action contacts
Optional LED status display
With mounted four- or five-pole M12 connector socket
(available for the wide enclosures as an accessory for selfassembly)
With 6-pole connector socket + PE on the metal enclosures
Similarly with a combination of connector socket and LED
indicators
(see online)
AS-Interface version with integrated ASIsafe electronics for all
enclosure designs (see online)
Blocking insert with padlock
Dust protection
A rubber cap to protect the twist actuator from contamination is
available for operation in dusty environments (see page 13/86).
Contact reliability
The new contact blocks ensure an extremely high contact
stability. This applies even when the devices are switching low
voltages and currents, e.g. 1 mA at 5 V DC.
Positive opening q
The NC contacts of the switch are forced open mechanically,
positively-driven and reliably by the plunger. This is referred to as
positive opening.
For a description of the basic switches, see page 13/6.

12/54
Siemens IC 10 2012
13/81
Limit Switches
SIRIUS 3SE5 Interlock Switches

with separate actuator
Complete units
2 or 3 contacts 5 directions of approach Degree of protection IP65 or IP66/IP67 Cable entry M20 1.5
Version1)
Contacts
DT Complete units
LEDs
Order No.
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
List
Price $
per PU
kg
Enclosure width 31 mm to EN 50047

5 directions of approach
3SE5 232-0RV40
1 NO + 1 NC --
1 unit
102
0.150
1 NO + 2 NC --
3SE5 232-0QV40
1 unit
102
0.155
3SE5 232-0QV40-1AA1
1 unit
102
0.150
3SE5 234-0RV40-1AC4
With increased minimum pull-out force 30 N

1 NO + 1 NC --
With separate
actuator
1 NO + 1 NC --
1 unit
102
0.165
1 NO + 2 NC --
3SE5 234-0QV40-1AE0
1 unit
102
0.170
3SE5 232-1RV40
With M12 socket

1 NO + 1 NC 24 V DC
1 unit
102
0.155
1 NO + 1 NC 230 V AC
3SE5 232-3RV40
1 unit
102
0.110
1 NO + 1 NC 24 V DC
3SE5 234-1RV40-1AF3
1 unit
102
0.175
1 NO + 2 NC --
3SE5 242-0QV40
1 unit
102
0.110
3SE5 242-0RV40-1AA1
1 unit
102
0.110
3SE5 242-1QV40
1 unit
102
0.120
1 unit
102
0.120

and 2 LEDs
With 2 LEDs

1 NO + 1 NC --
With separate
actuator
1 NO + 2 NC 24 V DC
1 NO + 2 NC 230 V AC
3SE5 242-3QV40
With 2 LEDs
q Positive opening according to IEC 6094751, Appendix K.
For 1/2 NPT adaptors and cable glands, see page 13/48.
1) Supplied without actuator. Please order separately (see page 13/86).
13/82

Mechanical Safety


Complete units
2 or 3 contacts 5 directions of approach Degree of protection IP66/IP67 Cable entry M20 1.5
Version1)
Contacts
DT Complete units
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU

1 NO + 2 NC
3SE5 132-0QV20
1 unit
1 NO + 2 NC
24 V DC
3SE5 132-1QV20
1 unit
1 NO + 2 NC
230 V AC
1 unit
With separate
actuator
3SE5 132-3QV20
With 2 LEDs

12

12/60
Siemens IC 10 2012
13/83
Limit Switches SIRIUS 3SE5, 3SE2 Mechanical Safety Switches



Complete units
Version1)
Contacts
DT Complete units
LEDs
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU

3SE5 212-0RV40
1 NO + 1 NC
1 unit
1 NO + 2 NC
3SE5 212-0QV40
1 unit
1 NO + 1 NC
24 V DC
3SE5 212-1RV40
1 unit
1 NO + 1 NC
230 V AC
1 unit
With separate
actuator
3SE5 212-3RV40
With 2 LEDs

12
13/84
Siemens IC 10 2012

12/61
Mechanical Safety

Complete units
Version1)
Contacts
DT Complete units
LEDs
Order No.
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
List
Price $
per PU
kg
Enclosure width 40 mm to EN 50041

1 NO + 2 NC --
3SE5 112-0QV10
1 unit
102
0.360
3SE5 112-0QV10-1AA7
1 unit
102
0.360
3SE5 114-0RV10-1AC5

1 NO + 2 NC --
With separate
actuator
1 NO + 1 NC --
1 unit
102
0.360
2 NC
3SE5 114-0QV10-1AE1
1 unit
102
0.360
3SE5 115-0QV10-1AD1
1 unit
102
0.380
3SE5 112-1QV10
--

1 NO + 2 NC --
With M12 socket

1 NO + 2 NC 24 V DC
1 unit
102
0.370
1 NO + 2 NC 230 V AC
3SE5 112-3QV10
1 unit
102
0.370
3SE5 114-1RV10-1AF3
1 unit
102
0.360
1 NO + 1 NC 24 V DC
3SE5 115-1RV10-1AF2
1 unit
102
0.380
1 NO + 2 NC --
3SE5 122-0QV10
1 unit
102
0.360
3SE5 122-0QV10-1AA7
1 unit
102
0.360
3SE5 122-1QV10
1 unit
102
0.370
1 unit
102
0.370

and 2 LEDs
With 2 LEDs
1 NO + 1 NC 24 V DC
With connector socket, 6-pole + PE (10 A)

and 2 LEDs

1 NO + 2 NC --
With separate
actuator
1 NO + 2 NC 24 V DC
1 NO + 2 NC 230 V AC
3SE5 122-3QV10
With 2 LEDs

13/85
Limit Switches

3SE5, metal and plastic enclosures
Accessories
Version
DT Order No.
List
Price $
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Actuators for 3SE5

Standard actuators,
length 75.6 mm
3SE5 000-0AV01
1 unit
102
0.040
With vertical fixing,

length 53 mm
3SE5 000-0AV02
1 unit
102
0.070
With transverse fixing,

length 47 mm
3SE5 000-0AV03
1 unit
102
0.070
3SE5 000-0AV04
3SE5 000-0AV01
3SE5 000-0AV02
3SE5 000-0AV03
Radius actuators,
length 51 mm
3SE5 000-0AV06
Direction of approach from the left
1 unit
102
0.070
Direction of approach from the right
3SE5 000-0AV06
1 unit
102
0.070
Universal radius actuators,

length 77 mm
3SE5 000-0AV05
1 unit
102
0.090
Length 67 mm
3SE5 000-0AV07-1AK2
1 unit
102
0.120
Length 77 mm
3SE5 000-0AV07
1 unit
102
0.090
3SE5 000-0AV08-1AA2
1 unit
102
0.010
3SE5 000-0AV08-1AA3
1 unit
102
0.065
Connector sockets (4-pole), M12, fixed

for M20 1.5
For max. 250 V, 4 A
3SY3 127
1 unit
102
0.010

With terminal compartment, can be preassembled
3RX8 000-0CB45
1 unit
574
0.015
Angular cable boxes (4-pole), M12

With terminal compartment, can be preassembled
3RX8 000-0CC45
1 unit
574
0.015

for M20 1.5
For max. 125 V, 4 A
3SY3 128
1 unit
102
0.010

With terminal compartm., can be pre-assembled
3RX8 000-0CB55
1 unit
574
0.016

3RX8 000-0CC55
1 unit
574
0.016
Cable glands M20 1.5

Plastic
3SX9 926
1 unit
102
0.010
3SE5 000-0AV05
Universal radius actuators, heavy-duty
3SE5 000-0AV07
Protective caps made of black rubber for the

actuator head, to protect the actuator openings
from contamination
3SE5 000-0AV08-1AA2
Not to be used for 3SE5 2.. plastic enclosures.

Blocking inserts, high-grade steel, for actuator
head, for up to 8 padlocks
3SE5 000-0AV08-1AA3
Connections for 3SE5, 3SE2
3SY3 127
3SX9 926
13/86
3RX8 000

Mechanical Safety
3SE2 Interlock Switches


1 contact 3 contacts Moving double-break contacts 1)2)
Actuation
DT
Enclo- Length
sure
of acwidth tuator
3SE. position switches
3SE. position switches
with 3 slow-action contacts
with 1 slow-action contact
6 mm stroke
Ident. No. 12
acc. to EN 50 013
Order No.
mm
mm
List
Price $
1 unit
Wght.
appr
ox.
6 mm stroke
Wght. Ident. No. 01
appro acc. to EN 50 013
x.
Order No.
kg
List
Price $
1 unit
kg
Molded plastic enclosure IP 67

3SE2 243-0XX Top and side entry1)
M20 x 1.5 connecting thread
Extraction force 5 N
52
52
With automatic ejection
52
3SE2 243-0XX40
3SE2 243-0XX
0.140
0.140
3SE2 257-6XX40
3SE2 257-6XX
0.120
0.120
3SE2 243-0XX30
0.140
3SE2 257-6XX30
0.120
3SE2 243-0XX48
0.140
3SE2 257-6XX48
0.140
M16 x 1.5 connecting thread

52
52
With automatic ejection
52
3SE2 243-0XX18
Actuators
Standard actuator
(rmin. = 150 mm)
28
Radius actuator
(universal)
(rmin. = 45 mm)
33
Ball catch
(up to 100 N)
28
Actuator with dust

protector and slit cover
(1 set)
34
Radius actuator
82
Accessories
Slit cover only for 3SX3234
(1 set = 3 units)
0.140
3SE2 243-0XX38
0.140
3SX3 218
0.020
3SX3 228
0.025
3SX3 217
0.035
3SX3 234
0.035
3SX3 256
0.020
3SX3 233
0.005
3SE2 257-6XX18
3SE2 257-6XX38
0.140
0.140
For operation, operating speed and travel, see Page 13/92.
Positive opening acc. to IEC 60 947-5-1,

Appendix K, and DIN VDE 0660 Part 200.

1) Supplied without actuator.
2) For conduit thread adaptors, see page 13/48.
13/87
Limit Switches SIRIUS 3SE5, 3SE2 Mechanical Safety Switches
Technical data
General data
Benefits
accordance with EN 50041 or EN 50047 standards. The devices

are suitable for use in any climate.
The 3SE5 position switches with separate actuator differ from the
previous series through the following new characteristics:
All enclosure sizes with increased corrosion protection
All enclosure sizes are optionally available with a LED signaling indicator.
The three-pole contact block 1 NO + 2 NC is available for all
enclosure sizes.
The plastic enclosure has simple and fast wiring equipment
which makes it possible to save from approx. 20 to 25 % of the
time when connecting.
with the AS-Interface connection (see online);
an adapter is not required.
Standards
Application
Position switches with separate actuator are used where the position of doors, covers or protective grills must be monitored for
safety reasons.
The position switch can only be operated with the matching
coded actuator. Simple overruling by hand or auxiliary devices
is impossible.
Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. Dimensions, fixing points of the enclosure are in
IEC 60947-5-1 or EN 60947-5-1.

Safety circuits
equipment of machines in all safety circuits and marked according to the IEC standard 60947-5-1 with the symbol q.
Category 3 according to ISO 13849-1 (EN 954-1) can be attained with a position switch with a separate actuator if the corresponding failsafe evaluation units are selected and correctly
installed, e.g. the 3TK28 safety relays or matching units from the
ASIsafe, SIMATIC or SINUMERIK product ranges.
Category 4 can be achieved when using an additional position
switch.
Type
3SE5 1..-..V.., 3SE5 2..-..V..
General data
Standards
3SE2 257-.XX..
3SE2 243-.XX..
IEC 60947-5-1, EN 60947-5-1
kV
400 AC;
over 300 V AC
only equal potential
500 AC;
over 380 V AC
only equal potential
10
400
500
Class 3
Class 3
2-pole
3-pole
1-pole
Ie / AC-15
6
3
1.5
Ie / AC-12
10
10
10
10
10
Ie / AC-15
10
10
6
4
3
3-pole
Ie / AC-12
10
10
10
10
10
Ie / AC-15
10
10
4
4
3

- At 24 V
- At 120 V
- At 240 V
- At 400 V
- At 500 V
A
A
A
A
A
Ie / AC-15
6
6
3
For direct current

- At 24 V
- At 125 V
- At 250 V
A
A
A
Ie / DC-13
3
0.55
0.27
Ie / DC-13
3
0.55
0.27
Ie / DC-12
10
Ie / DC-13
10
Ie / DC-12
10
Ie / DC-13
10
A
A
A
4
1
0.5
1
0.4
0.2
4
1
0.5
1
0.4
0.2
- At 110 V
- At 220 V
- At 440 V
12
gG operational class
With fuse links, quick
10
For utilization category AC-15 when

switching off Ie / AC-15 at 240 V
Switching frequency
Minimum pull-out force for positive opening
> 1 106 operating cycles


N
20
10
30
13/88

Siemens IC 10 2012
12/55
Mechanical Safety

3SE5 with separate actuator
Metal and plastic enclosures
Configuration
Operation and operating travel of actuators
Operation by a separate actuator
Nominal travel
Terminal designation acc.

to EN 50013
Contact closed
Contact open
Actuator in actuator head: NC is closed
Separate actuators
Standard actuators
1 NO + 1 NC
Axial and lateral actuation (4 90)
22
90
< 2 mm
21
14
13
Lateral actuation
Axial actuation
3SE5 ...-.RV..
1,7 2,5
mm
2,4 **
3SE5 ...-.RV..
NSC0_00921
30
NSC0_00920
vmax
Contact blocks

NSC0_00769
13-14
21-22 **
30
Ident. No. 11
NSC0_00892
Minimum force required in operating direction 30 N

(on retraction)
21 31 13
Ident. No. 12
NSC0_00770
90
1,7 2,5
mm
2,4 **
13-14
3SE5 ...-.QV..
NSC0_00923
30
NSC0_00922
3SE5 ...-.QV..
22 32 14
13-14
21-22 **
31-32 **
30
2,5
2,4
1,7
mm
**
13-14
1 NO + 2 NC
**
** 21-22
** 31-32
< 2 mm
90
** 21-22
2,5
2,4
1,7
mm
90
Radius actuators (all directions of approach)

Example: direction of approach from the left
NSC0_00893
For connector assignment, see page 13/61.

13/89
Limit Switches

Complete units
3SE5 23.-.QV40, 3SE5 23.-.RV40
25
3SE5 24.-.QV40, 3SE5 24.-.RV40
42
40
25
32,7
13
13
12,5
3SE5 11.--.QV10, 3SE5 11.-.RV10
53
NSC0_00795
12,5
M20x1,5
5,5
50
33
15
33
3SE5 12.-.QV10, 3SE5 12.-.RV10
32
20,6
32
36,5
13,5
36,5
20,6
12,5
32
32
18,5 4,4
NSC0_00794
68
20
22
15
M20x1,5
31
36
20,6
20,6
4,3
20
22
32,7
36
4,3
16,3
6
16,3
5,4
M20x1,5
30
40,5
NSC0_00797
M20x1,5
20
NSC0_00796a
5,3
78
60
78
40
56
15,3
37,3
5,5
15,3
37,8
Actuators
3SE5 000-0AV01
standard actuator
3SE5 000-0AV02
actuator with vertical fixing
3SE5 000-0AV03
actuator with horizontal fixing
4,5
4,5
NSC0_00781
18
75,6
15
31
0
53
4,5
3SE5 000-0AV04
radius actuator, approach from left
9,6
0
47
40
58
18
NSC0_00779
31
40
NSC0_00780
20
31
58
3SE5 000-0AV06
radius actuator approach from right
5,5
9,6
NSC0_00782a
22
40
50
31
68
51,1
31
0
NSC0_00784
4,5
28
13/90
68
NSC0_00783
51,1
31
30
22
3SE5 000-0AV05
universal radius actuator
4,5
28
77
40
39,5
50
40
50

Mechanical Safety

15
27,7
15
46
77
G_NSC0_00930
3SE5 000-0AV07
universal radius actuator, heavy duty
50
29
5,5
40
60
15
60
15
27,7
30
G_NSC0_00931

13/91
Limit Switches

Plastic enclosures
Configuration
Contact blocks
vmax
Terminal designation
acc. to EN 50013

Minimum force required in operating direction on retraction
Nominal travel
Radius actuation:
for all directions of approach
Contact closed
Contact open
Actuator in actuator head:
NC is closed
Separate actuators
Standard and radius actuators
Lateral actuation
Axial and lateral actuation
1 NC
3SE2 257.XX..
0
*)
50
R min 1
2,3
5,5
30 N
or
5N
8
11-12
NSC0_00275a
mm
22
3SE3 243: 90 mm
3SE3 257: 75 mm
Ident. No. 01
1 NO + 2 NC
3SE2 243.XX..
0
2,3
5,2 5,5
30 N
or
5N
8
13-14
21-22
31-32
mm
NSC0_00274a
NSC0_00273a
Ident. No. 12
30
*) Radius actuator: R min > 38 mm.
7
11
5,5
27
3SX3 217
actuator with ball locating
4,8
90
56
40
NSC0_00380c
14 8
13/92
2,8
9
13
52
30
5,5
for M 5 tapping screw
2,5
6,5
27
NSC0_00382a
25,5
20,5
15
M20/M16
15,5
5,5
15,7
10
30
9
13
28,5
20,5
2
15,5
M20/M16
52
16
27
29
18
2
8
29
18
5,5
75
2,5
6,5
28
56
40
25,5
20,5
2,8
16
27
40
3SX3 228
universal radius actuator
40
28
for M5
tapping screw
NSC0_00383b
56
5,5
3SE2 257, lateral and front-end actuation
NSC0_00381a
3SE2 243, lateral and front-end actuation,

with 3SX3 218 standard actuator

Mechanical Safety

3SE5 / 3SE2 with solenoid locking
General data
Overview
The position switches with solenoid interlocking are exceptional,
technically safe devices which restrict and prevent an unforeseen or intentional opening of protective doors, protective grilles
or other covers as long as a dangerous situation is present
(i. e. follow-on motion of the shutdown machine).
Locking devices
A high-grade steel locking device for attaching up to eight padlocks is available for even more safety (see page 13/97).
Dust protection
A rubber cap to protect the actuator head from contamination is
available for operation in dusty environments (see page 13/97).
Solenoid interlocking
There are two versions for locking the actuator:
Spring-actuated lock (closed-circuit principle) with various release mechanisms
Magnetic field lock (open-circuit principle)
The spring-actuated switch is equipped with an auxiliary release
for emergency situations or setup mode. Available as options:
Escape release or
Emergency release
Contact blocks
The safety position switches with solenoid interlocking are comprised of a switch part with electromechanical interlock and a
mechanical actuator which has to be ordered separately.
They are rugged protective devices that enable the greatest
possible safety for man and machine.
The position switches with solenoid interlocking have one contact block each for:
Monitoring the actuator or the position of the protective door
Monitoring the position of the solenoid
The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 1088.
Optical signaling equipment
The position switches with solenoid interlocking are offered in

plastic or metal enclosures.
Dimensions (W H D):
3SE5 3: 54 mm 185 mm 43.5 mm,
3SE2 8: 90 mm 100 mm (+ head 41.3 mm) 45 mm.
The signaling device indicates the switch position of the lock

and the protective device optically by means of 2 LEDs on the
front.
Operation
Protective device Interlock
The actuator head is included in the scope of supply. For actuation from four directions it can be adjusted through 4 x 90. The
3SE5 3 switches can also be approached from above.
The actuators are not included in the scope of supply of the

position switch and must be ordered separately from a choice
of six versions to suit the application (see page 13/97).
The position switches with solenoid interlocking are available

with an optional optical signaling device.
Display
Closed
Released
1)
Closed
Closed
2)
Open
Open
1)
Meaning
2)
Actuator free
to be pulled
Actuator
locked
Actuator
pulled
Actuation data:
Maximum actuating speed vmax = 1.5 m/s
Minimum actuating speed vmin = 0.4 mm/s
Minimum force in the direction of actuation Fmin = 30 N
Note:
The voltage of the LEDs at the monitored contacts must be the
same as the operational voltage of the solenoid (same potential).
The actuator is encoded. Simple overruling by hand or auxiliary

devices is impossible.
1)
Yellow LED.
2)
Green LED.
Radius actuators
The position switches with radius actuators are particularly suitable for rotatable protective devices. The movable actuation key
allows even small radii to be approached. Damage to the switch
and the actuator due to inaccurate approach is prevented.

13/93
Limit Switches

General data
Benefits
The new generation of 3SE5 3 position switches offers:
More safety through higher locking forces:
- 1300 N with plastic enclosure
- 2600 N with metal enclosure
Various release mechanisms: lock release, escape release
and emergency release
Two contact blocks each with three contacts as standard
equipment, hence fewer versions needed
Same dimensions for all enclosure variants:
Plastic, metal or with integrated ASIsafe
An extensive range of actuators
An optional LED status display 24 V DC, 115 V AC or
230 V AC for all switch variants
There are two versions of locking:

Spring-actuated lock (closed-circuit principle)
In the standard version, the position switch locks by means of
spring force and releases by means of electromagnetic force.
In the case of voltage failure, it reliably prevents the protective
device from opening when machine parts are still moving.
The switch is equipped with an auxiliary release for emergency
situations or setup mode.
An auxiliary release which can be secured with a lock to prevent misuse is available as a version.
Application
The position switches with solenoid interlocking are exceptional,
technically safe devices which restrict and prevent an unforeseen or intentional opening of protective doors, protective grilles
or other covers as long as a dangerous situation is present
(i.e. follow-on motion of the shutdown machine).
The safety position switches with solenoid interlocking have the
following functions:
Enabling the machine or process with closed and locked protective device
Locking the machine or process with opened protective device
Position monitoring of the protective device and solenoid
Standards
The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Devices).
The mechanical design of the switch corresponds to the requirements of the failsafe principle according to EN 1088.
Approvals
The switches are approved for use with locking devices according to EN 1088 and EN 292, Parts 1 and 2.
Auxiliary release
Auxiliary release with lock
The new 3SE5 3 position switches are also available with an escape release or an emergency release.
Personnel working inside the hazard zone can use the escape
release feature to manually release the interlock without tools
from the escape side (hazardous area side) so that they can
exit the hazard area. An intentional act (in this case pulling the
gray actuator) is required to release the locking mechanism
and restore the normal operating state.
The emergency release enables someone in an emergency situation to manually release the interlock without tools from the
access side (outside the hazardous area). Releasing the lock
and restoring the normal operating state must require effort
which is comparable to repair activity, in this case disassembly
of the red actuator and resetting the mechanical lock.
3SE5 3 position switches with solenoid interlocking bear the VDE

test mark for tested according to GS-ET19 (Test Principles of the
German Trade Association for Locking Devices with Electromagnetic Interlocks).
The 3SE2 8 metal-enclosed position switches with solenoid interlocking have been awarded a test certificate from the BIA
(Berufsgenossenschaftliches Institut fr Arbeitssicherheit).
Category 3 according to ISO 13849-1 (EN 954-1) can be attained with a position switch with solenoid interlocking if the corresponding failsafe evaluation units are selected and correctly
installed, e. g. the 3TK28 safety relays or matching units from the
ASIsafe, SIMATIC or SINUMERIK product ranges.
Category 4 can be achieved when using an additional position
switch.
They are approved according to UL 508, UL 50 and UL 746-C.
Solenoid interlocking
The separate actuator operates in a similar way to the coding of
a key and protects against manipulation. It transmits the locking
force to the protective device and helps to monitor its position.
13/94
Escape release from the front
Emergency release from the back
Magnetic field lock (open-circuit principle)

The second version offers locking by means of electromagnetic force and release by means of spring force. This version
has an advantage when it is necessary to quickly access the
machine after a power failure occurs, or in the case of very
short overtravel times.

Mechanical Safety

with locking force up to 1200 N
6 slow-action contacts 5 directions of approach Cable entry 3 M20 1.5 Degree of protection IP66/IP67
Locking force 1300 N (1000 N according to GS-ET 19)
Interlock1)
LEDs
DT Complete units
Position monitoring:
Actuators:
1 NO + 2 NC
Solenoid:
1 NO + 2 NC
Solenoid
Rated operational voltage
Order No.
1300 N locking force Enclosure width 54 mm

Spring-actuated locks
With auxiliary release
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
With escape release

-from the front and
emergeny release from back
24 DC
q B
For ambiant temperature -up to to 40 C
24 DC
With escape release

from the back
and auxiliary release
from the front
--
24 DC
--
115 AC
--
3SE5 312-0SD2.
With lock
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price $
per PU
3SE5 322-0SD21
kg
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
3SE5 322-3SD23
1 unit
102
0.590
3SE5 322-0SE21
1 unit
102
0.745
1 unit
102
0.745
1 unit
102
0.745
1 unit
102
0.745
1 unit
102
0.745
3SE5 322-3SE23
1 unit
102
0.745
3SE5 322-0SF21
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
1 unit
102
0.590
3SE5 322-3SF23
1 unit
102
0.590
3SE5 322-0SL21
1 unit
102
0.590
3SE5 322-0SL21-1AJ0
1 unit
102
0.590
3SE5 322-0SG21
1 unit
102
0.590
1 unit
102
0.590
230 AC
1 unit
102
0.590
Yellow/Green
24 DC
1 unit
102
0.590
Yellow/Green
115 AC
1 unit
102
0.590
Yellow/Green
230 AC
3SE5 322-3SG23
1 unit
102
0.590
--
24 DC
3SE5 322-0SH21
1 unit
102
0.745
24 DC
3SE5 322-0SJ21
1 unit
102
0.745
115 AC
1 unit
102
0.745
230 AC
1 unit
102
0.745
24 DC
1 unit
102
0.745
Yellow/Green
115 AC
1 unit
102
0.745
Yellow/Green
230 AC
3SE5 322-3SJ23
1 unit
102
0.745
--
24 DC
3SE5 322-0SB21
1 unit
102
0.590
--
115 AC
1 unit
102
0.590
--
230 AC
1 unit
102
0.590
Yellow/Green
24 DC
1 unit
102
0.590
Yellow/Green
115 AC
1 unit
102
0.590
Yellow/Green
230 AC
1 unit
102
0.590
3SE5 322-0SD22
3SE5 322-0SD23
3SE5 322-1SD21
3SE5 322-2SD22
3SE5 322-0SE22
3SE5 322-0SE23
3SE5 322-1SE21
3SE5 322-2SE22
3SE5 312-0SE2.
With escape release
from the front
3SE5 312-0SF2.
3SE5 312-0SG2.
With escape release
from the back
with lock from the front
3SE5 312-0SJ2.
With emergency release -from the back

-and auxiliary release
-from the front
Yellow/Green
Magnetic field locks
3SE5 312-0SB2.
3SE5 322-0SF22
3SE5 322-0SF23
3SE5 322-1SF21
3SE5 322-2SF22
3SE5 322-0SG22
3SE5 322-0SG23
3SE5 322-1SG21
3SE5 322-2SG22
3SE5 322-0SJ22
3SE5 322-0SJ23
3SE5 322-1SJ21
3SE5 322-2SJ22
3SE5 322-0SB22
3SE5 322-0SB23
3SE5 322-1SB21
3SE5 322-2SB22
3SE5 322-3SB23

13/95
Limit Switches

with locking force up to 2000 N
6 slow-action contacts 5 directions of approach Cable entry 3 M20 1.5 Degree of protection IP66/IP67
Locking force 2600 N (2000 N according to GS-ET 19)
Interlock1)
LEDs
DT Complete units
Position monitoring:
Actuators:
1 NO + 2 NC
Solenoid:
1 NO + 2 NC
Solenoid
Rated operational voltage
Order No.
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price $
per PU
kg
2600 N locking force Enclosure width 54 mm

Spring-actuated locks
3SE5 312-0SD1.
With lock
3SE5 312-0SE1.
With escape release
from the front
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
--
115 AC
--
230 AC
48 AC/DC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
--
115 AC
--
230 AC
Yellow/Green
24 DC
Yellow/Green
115 AC
Yellow/Green
230 AC
--
24 DC
24 DC
115 AC
3SE5 312-0SD11
1 unit
102
1.030
1 unit
102
1.030
1 unit
102
1.030
1 unit
102
1.040
1 unit
102
1.040
3SE5 312-3SD13
1 unit
102
1.040
3SE5 312-0SE11
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
3SE5 312-3SE13
1 unit
102
1.180
3SE5 312-0SF11
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
1 unit
102
1.180
3SE5 312-3SF13
1 unit
102
1.180
3SE5 312-0SG11
1 unit
102
1.175
1 unit
102
1.175
1 unit
102
1.175
1 unit
102
1.180
1 unit
102
1.180
3SE5 312-3SG13
1 unit
102
1.180
3SE5 312-0SH11
1 unit
102
1.180
3SE5 312-0SJ11
1 unit
102
1.180
1 unit
102
1.180
230 AC
1 unit
102
1.180
24 DC
1 unit
102
1.180
Yellow/Green
115 AC
1 unit
102
1.180
Yellow/Green
230 AC
3SE5 312-3SJ13
1 unit
102
1.180
--
24 DC
3SE5 312-0SB11
1 unit
102
1.030
--
115 AC
1 unit
102
1.030
--
230 AC
1 unit
102
1.030
Yellow/Green
24 DC
1 unit
102
1.040
Yellow/Green
115 AC
1 unit
102
1.040
Yellow/Green
230 AC
1 unit
102
1.040
3SE5 312-0SD12
3SE5 312-0SD13
3SE5 312-1SD11
3SE5 312-2SD12
3SE5 312-0SE12
3SE5 312-0SE13
3SE5 312-0SE14
3SE5 312-1SE11
3SE5 312-2SE12
3SE5 312-0SF12
3SE5 312-0SF13
3SE5 312-1SF11
3SE5 312-2SF12
3SE5 312-0SF1.
With escape release
from the back
from the front
3SE5 312-0SG12
3SE5 312-0SG13
3SE5 312-1SG11
3SE5 312-2SG12
3SE5 312-0SG1.
With escape release
from the back
with lock from the front
With emergency release -from the back

-and auxiliary release
-from the front
Yellow/Green
3SE5 312-0SJ12
3SE5 312-0SJ13
3SE5 312-1SJ11
3SE5 312-2SJ12
3SE5 312-0SJ1.
Magnetic field locks
3SE5 312-0SB12
3SE5 312-0SB13
3SE5 312-1SB11
3SE5 312-2SB12
3SE5 312-3SB13
3SE5 312-0SB1.
13/96

Mechanical Safety

3SE5, metal and plastic enclosures
Accessories
Version
DT Order No.
List
Price $
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Actuators for 3SE5 1)

Standard actuators,
length 75.6 mm
3SE5 000-0AV01
1 unit
102
0.040
With vertical fixing,

length 53 mm
3SE5 000-0AV02
1 unit
102
0.070
With transverse fixing,

length 47 mm
3SE5 000-0AV03
1 unit
102
0.070
3SE5 000-0AV04
3SE5 000-0AV01
3SE5 000-0AV02
3SE5 000-0AV03
Radius actuators,
length 51 mm
3SE5 000-0AV04
Direction of approach from the left
1 unit
102
0.070
Direction of approach from the right
3SE5 000-0AV06
1 unit
102
0.070
Universal radius actuators,

Length 77 mm
Length 77 mm, tab rotated 90
3SE5 000-0AV05
1 unit
102
0.090
3SE5 000-0AV05-1AA6
1 unit
102
0.090
Length 67 mm
3SE5 000-0AV07-1AK2
1 unit
102
0.120
Length 77 mm
3SE5 000-0AV07
1 unit
102
0.090
Protective caps made of black rubber for the

actuator head, to protect the actuator openings
from contamination
3SE5 000-0AV08-1AA2
1 unit
102
0.010
Blocking inserts, high-grade steel, for actuator

head, for up to 8 padlocks
3SE5 000-0AV08-1AA3
1 unit
102
0.065

for M20 1.5
For max. 250 V, 4 A
3SY3 127
1 unit
102
0.010
Cable boxes (4-pole), M12, non-adjustable

With terminal compartment, can be
pre-assembled
3RX8 000-0CB45
1 unit
574
0.015

With terminal compartment, can be
pre-assembled
3RX8 000-0CC45
1 unit
574
0.015
Connector sockets (5-pole), M12

for M20 1.5
For max. 125 V, 4 A
3SY3 128
1 unit
102
0.010

3RX8 000-0CB55
1 unit
574
0.016

3RX8 000-0CC55
1 unit
574
0.016
Cable glands M20 1.5

Plastic
3SX9 926
1 unit
102
0.010
3SE5 000-0AV05
Universal radius actuators, heavy-duty
3SE5 000-0AV07
3SE5 000-0AV08-1AA2
3SE5 000-0AV08-1AA3
Connections for 3SE5, 3SE2
3SY3 127
3SX9 926
3RX8 000
1) See page 13/90 for dimensions drawings.

13/97
Limit Switches

Type
3SE5 322
3SE5 312
3SE2 83, 3SE2 84
General data
IEC 60947-5-1, EN 60947-5-1
Standards
Degree of pollution acc. to EN 60664-1

250
Class 3
kV

DC
24
24
AC 50/60 Hz
230
110 ... 130
10
A
A
A
Ie /AC-15 or B300
6
3
1.5
Ie /AC-12
10
10
10
Ie /AC-15
4
4
4
Ie /DC-13 or Q300
3
--0.55
-0.27
Ie /DC-12
10
5
2.5
-1
--
Ie /DC-13
3
1.5
0.7
-0.3
--
230

- At 24 V
- A t 120 V
- A t 230 V
For direct current
- At 24 V
- At 60 V
- At 110 V
- A t 125 V
- At 220 V
- A t 250 V
A
A
Magnet
Locking force, max.
1300
2600
1820
Locking force acc. to GS-ET 19
1000
2000
1400
Power consumption at Uc
3.5
5.2

operational class gG
--
10
0.5
--
With 3RH11, 3RT10 16 to 3RT10 26 contactors
For AC-15 utilization category
1 105 operating cycles,

when interrupting Ie /AC-15 at 230 V
0.5 106 operating cycles,

when interrupting Ie /AC-15 at 230 V
For DC-13 utilization category
With DC current the contact endurance depends not only on the breaking current but also on the
voltage, the circuit inductance and the speed of switching.
No generally valid information can be given.
Switching frequency
With 3RH11, 3RT10 16 to 3RT10 26 contactors
Shock resistance acc. to IEC 60068-2-27
30 g/11 ms
Type
3SE5 322
3SE5 312
3SE2 83, 3SE2 84
Enclosure material
Ultramid A3X2G7
Zinc diecasting GD Zn Al4 Cu1
Aluminum (GD - AlSi 12)
Degree of protection acc. to EN 60529
IP66/IP67
IP67
Characteristic quick
--
Enclosure
Ambient temperature
During operation
25 ... +60
30 ... +70
During storage, transport
40 ... +80
--
Any
Mounting position
Connection
M 20 1.5
Cable entry
M 20 1.5
Conductor cross-sections
Solid
mm 1 (0.5 ... 1.5)
Finely stranded with end sleeve
mm 2 (0.5 ... 0.75)
Protective conductor connection

Inside enclosure
1)
--
2 2.5
2 1.5
M3.5
Without any welds according to IEC 60947-5-1.
13/98

Mechanical Safety

3SE5 with solenoid locking
Schematics
3SE5
Monitoring the actuator:
Monitoring the solenoid:
11 21
33
Slow-action contacts 1 NO + 2 NC
42 52 64
NSC0_00279a
12 22 34
41 51
63
NSC0_00349a
Slow-action contacts 1 NO + 2 NC
Configuration
1 NO + 2 NC
Axial and lateral actuation (4 90)
12 22 34
90
< 2 mm
11 21
33
Ident. No. 12
90
90
Lateral actuation
Axial actuation
3SE5 3..-.S...
3SE5 3..-.S...
1,7 2,5
mm
2,4 **
NSC0_00925
30
NSC0_00924
Standard actuators
90
Contact closed
Contact open
Actuator in actuator head: NC is closed
Separate actuators with solenoid interlocking
< 2 mm
Nominal travel
Terminal designation acc.

to EN 50013
11-12 **
21-22 **
33-34
30
2,5
2,4
1,7
mm
**
** 11-12
** 21-22
33-34
vmax
Contact blocks

NSC0_00279a
NSC0_00892
Minimum force required in operating direction 30 N

(on retraction)
Radius actuators (all directions of approach)
Example: Direction of approach from the left
NSC0_00893
For connector socket assignment, see page 13/61.

13/99
Limit Switches

3SE5 with solenoid locking
Spring-actuated lock, with auxiliary release
3SE5 322-.SD2., 3SE5 322-.SG2., 3SE5 322-.SJ2.,
3SE5 312-.SD1., 3SE5 312-.SG1., 3SE5 312-.SJ1.,
Spring-actuated lock, with auxiliary release with lock

3SE5 322-.SE2.,
3SE5 312-.SE1.
39,1
2,9
39,1
2,9
32
30
40
19,3
33
19,3
33
25,1
25,1
32
18,9
30
40
5,3
18,9
5,3
31
21,5
NSC0_00771
21,5
40
54
16,3
43,8
94
5,5
31
Spring-actuated lock, with escape release

3SE5 322-.SF2.,
3SE5 312-.SF1.
40
54
16,3
43,8
5,5
87
Magnetic field lock

3SE5 322-.SB2.,
3SE5 312-.SB1.
39,1
2,9
39,1
2,9
32
18,9
30
40
135,3
5,3
5,5
16,3
43,8
16,3
43,8
31
94
NSC0_00774
21,5
NSC0_00773
21,5
40
54
18,9
M20x1,5
M20x1,5
31
159
30
31
5,3
135,3
159
30
40
19,3
33
19,3
33
25,1
25,1
32
NSC0_00772
M20x1,5
M20x1,5
31
135,3
159
30
135,3
159
62,1
40
54
5,5
The plastic
knock-out
openings
behind
the the
plasticenclosures
enclosureshave
have
knock-out
openings
behind
connecting
thread;they
theyare
are
delivered
therefore
without
connecting thread;
delivered
therefore
without
protective
caps.
protective caps.
For actuators
For
actuatorssee
seepage
page13/90.
13/92.
13/100

Mechanical Safety
SIRIUS 3SE5 Hinge Switches
Hinge Switches
General data
General data
Overview
Benefits
3SE5 hinge switches have the same enclosures as the standard

switches (modular system).
The 3SE5 hinge switches differ from the previous series through
the following new characteristics:
All actuators can be turned around the axis in increments of
22.5 (see picture on page 13/6).
The new three-pole contact block 1 NO + 2 NC is available
for all enclosure sizes (see picture on page 13/7).
The plastic enclosure with a width of 31 mm has simple and
fast wiring equipment which makes it possible to save from
approx. 20 to 25 % of the time when connecting (see picture
on page 13/7).
with the AS-Interface connection (see online); an additional
adapter is not required.
Application
Hinge switches
Design
Enclosure sizes
The 3SE5 switches are available as complete units in two enclosure sizes:
Plastic enclosures according to EN 50047, 31 mm wide, IP65,
1 cable entry
Metal enclosures according to EN 50047, 31 mm wide,
Plastic and metal enclosures according to EN 50041, 40 mm
wide, IP66/IP67, 1 cable entry
Enclosure versions
Various basic versions can be selected for the enclosures:
Available with two or three-pole contact blocks designed as
snap-action contacts
(see online)
AS-Interface version with integrated ASIsafe electronics for all
enclosure designs (see online)
For a description of the basic switches, see page 13/6.
12
Operating mechanism
The hinge switches are provided for mounting on hinges. The
actuator head is included in the scope of supply. There are two
versions:
Operating mechanism with hollow shaft, inner diameter 8 mm,
outer 12 mm
Operating mechanism with solid shaft, diameter 10 mm

12/72
The hinge switches are used in those areas where the position of
swiveling protective devices such as doors or flaps must be
monitored. With these switches, the position of the doors and
hinge switches is converted into electric signals. The switches
allow shutdown and signaling without delay in the event of a
small opening angle through the snap-action contacts with an
operating angle of 10.
Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the best contact blocks suited for the particular purpose. Dimensions and fixing points of the enclosures are in
accordance with EN 50041 or EN 50047 standards.
The devices are suitable for use in any climate.
Standards
IEC 60947-5-1 or EN 60947-5-1.
Safety circuits
equipment of machines in all safety circuits and marked according to IEC 60947-5-1 with the symbol q.
Category 4 according to EN 954-1 can be attained with the 3SE5
hinge switches with q if the corresponding failsafe evaluation
units are selected and correctly installed, e.g. the 3TK28 safety
relays or matching devices from the ASIsafe, SIMATIC or
SINUMERIK product ranges.
13/101
Siemens IC 10 2012
Mechanical
SIRIUS 3SE5,Safety
3SE2 Mechanical Safety Switches
SIRIUS
3SE5 Hinge Switches
Hinge Switches
Enclosure width 31 mm / 40 mm
Complete units
2 or 3 contacts Degree of protection IP65 (31 mm) or IP67/IP68 (40 mm) Cable entry M20 1.5
Version
DT Complete units
Configurator
Order No.
PU
(UNIT,
SET, M)
PS*
Price per
PU
Plastic enclosures Enclosure width 31 mm acc. to EN 50047

With hollow shaft
3SE5 232-0HU21
Operating angle 10
1 NO + 1 NC
1 unit
Operating angle 10
1 NO + 2 NC
3SE5 232-0LU21
1 unit
Operating angle 10
1 NO + 1 NC
3SE5 232-0HU22
1 unit
Operating angle 10
1 NO + 2 NC
3SE5 232-0LU22
1 unit
1 NO + 2 NC
3SE5 132-0LU21
1 unit
1 NO + 2 NC
3SE5 132-0LU22
1 unit
PU
(UNIT,
SET, M)
PS*
With hollow shaft

With solid shaft
With solid shaft
Plastic enclosures Enclosure width 40 mm acc. to EN 50041

With hollow shaft
Operating angle 10
With hollow shaft

With solid shaft
Operating angle 10
12
With solid shaft

Spare parts
Version
Actuator heads
DT Order No.
With hollow shaft

Operating angle 10
Price per
PU
3SE5 000-0AU21
1 unit
3SE5 000-0AU22
1 unit
With hollow shaft

With solid shaft
Operating angle 10
With solid shaft
Note:
The respective actuators are included in the scope of supply for
the complete units.
13/102
12/74
Siemens IC 10 2012

Catalog

Industrial
Controls
Illustrations are
approximate
Mechanical
Safety
SIRIUS 3SE5, 3SE2 Mechanical
Safety Switches
SIRIUS 3SE5Hinge
HingeSwitches
Switches

Enclosure
width 31 mm / 40 mm

Complete units
3 contacts Degree of protection IP66/IP67 Cable entry M20 1.5

Version
DT
Complete units
PU (UNIT,
SET, M)
Configurator
Order No.
Price per
PU
Metal enclosures Enclosure width 31 mm acc. to EN 50047

With hollow shaft
Operating angle 10
1 NO + 2 NC
3SE5 212-0LU21
1 NO + 2 NC
3SE5 212-0LU22
1 NO + 2 NC
3SE5 112-0LU21
1 NO + 2 NC
3SE5 112-0LU22
With hollow shaft

With solid shaft
Operating angle 10
With solid shaft
Metal enclosures Enclosure width 40 mm acc. to EN 50041

With hollow shaft
Operating angle 10
With hollow shaft

With solid shaft
Operating angle 10
Spare parts
Actuator heads
Version
DT Order No.
With hollow shaft

Operating angle 10
Price per
PU
PU
(UNIT,
SET, M)
PS*
3SE5 000-0AU21
1 unit
3SE5 000-0AU22
1 unit
With hollow shaft

With solid shaft
Operating angle 10
With solid shaft
Note:
The respective actuators are included in the scope of supply for
the complete units.
Industrial Controls
Catalog
Illustrations
are approximate
13/103
Siemens IC 10 2012
12/75
12
With solid shaft
Mechanical Safety
3SE2 Hinge Switches

with integrated hinge
Overview
Benefits
The 3SE2 283 hinge switches are particularly suitable for use in
doors and flaps of machines that must be closed to ensure the
safety of operating personnel. Their thin profile and compact design allow them to be directly mounted on a hinged protective
cover and the stable frame.
Easy mounting through use of versions with integrated hinge

Versions with small operating angle of 4
Protection against personal injury provided by positively
driven NC contacts according to IEC 60947-5-1
Simultaneous shutdown and reporting by 1 NO + 2 NC
contacts

3 contacts Degree of protection IP65 Cable entry 2 (M20 1.5)
Version
Slow-action
contacts
DT Complete units
Order No.
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
List
Price $
per PU
kg
Plastic enclosures with integrated hinge

With mounted hinges
(delivered with additional
hinge and fixing
accessories)
Slow-action
contacts
Aluminum hinge
3SE2 283
- Operating angle 4
1 NO + 2 NC
3SE2 283-0GA43
1 unit
102
0.425
- Operating angle 4
3 NC
3SE2 283-6GA43
1 unit
102
0.425
- Operating angle 8
1 NO + 2 NC
3SE2 283-0GA53
1 unit
102
0.420
- Operating angle 8
3 NC
3SE2 283-6GA53
1 unit
102
0.420
- Operating angle 4
1 NO + 2 NC
3SE2 283-0GA44
1 unit
102
0.800
- Operating angle 4
3 NC
3SE2 283-6GA44
1 unit
102
0.800
High-grade steel hinge
Accessories/spare parts
Version
DT Order No.
List
Price $
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Accessories
Additional hinges
(delivered with fixing accessories)
Made of aluminum
3SX3 225
1 unit
102
0.160
Made of high-grade steel
3SX3 231
1 unit
102
0.330
3SX3 225
For
glands,
see
page
13/42
For1/2''
1/2NPT
NPTadaptors
adaptorsand
andcable
cable
glands,
see
page
13/48.
13/104

Mechanical Safety
SIRIUS 3SE5 Hinge Switches

3SE5, plastic and metal enclosures
Configuration
Contact blocks and operating travel of actuators
Nominal travel
acc. to EN 50013
Hinge switches
1 NO + 1 NC
21
1 NO + 2 NC
NSC0_00918
NSC0_00767
13
**
10
Nominal travel
acc. to EN 50013
3SE5 ...-0HU2.
22
14
Contact blocks
Contact closed
Contact open
13-14
21-22 **
20
Ident. No. 11
13 31 21
3SE5 ..-0LU2.
14 32 22
NSC0_00919
NSC0_00768
Contact blocks
**
10
13-14
21-22 **
31-32 **
20
Ident. No. 12
83,5
7
NSC0_00811
NSC0_00812
68
68
20
22
2,9
M3
15
M20x1,5
31
33
87,3
12,5
24
56,6
51,6
43,6
16,3
16,3
M3
2,9

M20x1,5
5,3
NSC0_00813a
5,3
30
40,5
15,3
37,3
M20x1,5
NSC0_00814a
60
78
60
78
51,6
30
40,5
33
with solid shaft
3SE5 122-0.U22, 3SE5 132-0.U22
12
with hollow shaft
3SE5 112-0.U21, 3SE5 132-0.U21
15
M20x1,5
12,5
24
31
10
50
12,5
13
7
13
12,5
20
22
24
4,3
24
4,3
52,8
47,8
39,8
10
with solid shaft
3SE5 212-0.U22, 3SE5 232-0.U22
12
with hollow shaft
3SE5 212-0.U21, 3SE5 232-0.U21
15,3
37,3
13/105
Mechanical Safety
3SE2 Hinge Switches

with integrated hinge
Overview
The hinge switches are used for monitoring and protecting

hinged protective devices such as doors and flaps.
250
2.5
At AC-15, 120 V
4.2
At AC-15, 250 V
At DC-13, 24 V
Type
Characteristics
Special design, with 2 M20 1.5 connecting thread
Degree of protection IP65
3 contacts
Operating angle of 4 or 8
3SE2 283
> 5 V/1 mA
Min. make-break capacity
Design
Short-circuit protection
Operational class gG
The 3SE2 283 hinge switch has an integrated electromechanical

contact block that is actuated when the hinged protective cover
is opened. If the cover is opened by 4 or 8, the NC contact is
positively opened by a direct (not spring-action) mechanism.
These positively driven contacts guarantee interruption of the
electric circuit and stopping of the machine. The NO contact is
closed when the cover is moved by 13.5.
> 1 106 operating cycles
Switching frequency
1200 operating cycles/hour
Positive opening
2 mm after opening point
Enclosure material
Plastic
IP65
C
Ambient temperature
25 ... +65
Shock resistance
30 g/18 ms
Resistance to vibrations
20 g /10 ... 200 Hz
Cable entry
2 (M20 1.5)
Screw terminals
0.5 ... 1.5 mm2/AWG 15
Configuration
Contact blocks and operating travel of actuators (operating angle 4)
Contact blocks
Nominal travel
acc. to EN 50013
Contact blocks
Contact closed
Contact open
Hinge switches
1 NO + 2 NC
Nominal travel
acc. to EN 50013
3SE2 283-0GA4.
0
NSC0_00614a
Ident. No. 12
3 NC
3SE2 283-6GA4.
13,5
11-12
21-22
33-34
13
NSC0_00615a
11-12
21-22
31-32
13,5
Ident. No. 03
3SE2 283-.GA.3 hinge switch with hinge
13/106
3SX3 225 additional hinge

Mechanical
Safety
SIRIUS 3SE6 Non-Contact
Safety Switches
SIRIUS 3SE6 RFID Non-Contact Safety Switches

RFID
General
data
3SE63 RFID safety
switches
Overview
Note:
Keep metal parts and cuttings away from the vicinity of the
switch
Minimum distance between two switches 100 mm
Coding
Family coded
These safety switches are delivered ready to use, i.e. no programming is necessary.
Individually coded, programmable once
The assignment of safety switch and actuator thus created is irreversible.
The actuator is programmed simply by routine during startup,
thus permanently preventing any form of tampering by means of
a replacement actuator.
3SE63 RFID contactless safety switches meet the highest safety

requirements, SIL3 or Cat. 4, for monitoring the positions of movable protective devices.
An RFID safety switch consists of a coded RFID switch with an
8-pole M12 connector plug and an identical RFID actuator.
The switch is available in several versions:
Family coded with M12 plug or with additional 18 N magnetic
catch as an option
Individually coded, programmable once, with M12 plug or
with additional 18 N magnetic catch as an option
Individually coded, programmable more than once (an unlimited number of times), with M12 plug or version with additional
18 N magnetic catch
The actuator is therefore available in two versions:
Standard
With 18 N magnetic catch
The magnetic catch keeps doors and hinge switches closed
with permanent magnets.
Optional accessories
Covers for sealing mounting holes, also suitable for tamperproofing screw fixings
Spacers (approx. 3 mm high) to facilitate cleaning under the
installation surface when using pressure washers, for example
Mounting and maintenance
Reduction in the number of versions, because
switches can be mounted on right or left sides
the actuator can be mounted on all sides
Quick and easy mounting by thanks to universal mounting holes
Standard gauge/holes for 3SE6 magnetically operated switch
Fine adjustment thanks to slotted holes
Little adjustment or maintenance required
Threshold indication by LED on the switch for quick and easy
adjustment during installation and maintenance
Molded switch allows it to be used as an end stop for small
and medium-sized doors

Individually coded, programmable several times

The procedure for programming a new actuator can be repeated
an unlimited number of times. When a new actuator is programmed the previous code becomes invalid. A protected coding process allows new actuators to be programmed for service
purposes.
After this, a ten-minute lockout provides enhanced tamper protection. The green LED flashes until the lockout time has ended
and the new actuator has been detected. If the operational voltage is interrupted during this time, the ten-minute guard time is
restarted.
Programming procedure for individual coding
1. Apply operational voltage to safety sensor
2. Move actuator into detecting range:
red LED lights up, yellow LED flashes (1 Hz)
3. After 10 s it changes to a shorter flashing frequency (3 Hz). In
this state switch off operational voltage.
4. After the next time the operational voltage is switched on, the
actuator is detected again to activate the programmed actuator
code. The activated code is thus stored permanently.
Diagnostics
The RFID safety switch indicates its operating state including
faults by means of the LED indicator in the switch and the shortcircuit resistant diagnostic output. The signals can then be used
for central displays or non-safety-related control tasks.
There are two diagnostics functions:
Crossover monitoring
Open-circuit monitoring
External voltage monitoring
Ambient temperature too high
Wrong or defective actuator
Switching interval threshold identification with LED indication
The signal combination "diagnostics output switched off" and
"safety outputs still switched on" can be used to move the machine into a controlled stop position.
Any crossover or a fault that is not currently compromising the
safe operation of a safety switch results in the disconnection of
the safety channels after a 30 minute delay. However, the diagnostics output switches off instantaneously.
13/107
Siemens IC 10 2012
12/105
12
Non-contact RFID safety switches

with maximum tamper resistance
Mechanical
Safety
SIRIUS
3SE6
Non-Contact Safety Switches
SIRIUS 3SE6 RFID Non-Contact Safety Switches
RFID
General data
3SE63 RFID safety switches
Mode of operation of the diagnostics LEDs
The safety switch indicates not only its operating state, but also
faults by means of LEDs in three colors at the ends of the RFID
switch.
The green LED indicates readiness for operation when the
control supply voltage is connected.
The yellow LED indicates that there is an actuator in detecting
range. If the actuator is in the switching interval threshold, this
is indicated by flashing. This flashing can be used to identify
a change in the distance between sensor and actuator at an
early stage (e.g. as a result of the sagging of a protective
door). The installation should be tested before the distance increases further, the safety outputs switch off and the machine
stops.
The red LED indicates the individual causes of the fault by
means of defined flashing frequencies.
Benefits
Maximum tamper resistance by means of individual coding of
switches and actuators at the highest safety level
Plastic enclosure with integrated connector
2 electronic short-circuit proof safety outputs, each 250 mA
Integrated crossover, open circuit and external voltage monitoring, with series circuit as far as the control cabinet
Safety and diagnostics signals can be connected in series
Series connection of safety circuits in Cat. 4 / PL e / SIL 3
LED status indication including switching interval threshold indication for quick and easy adjustment during installation and
maintenance
Short-circuit proof conventional diagnostics output
Optional version with magnetic catch for interlocking hatches
or small doors even when de-energized
Highly rugged thanks to the use of tested enclosure materials,

resistant to aggressive cleaning products, with a degree of
protection of up to IP69K
Fine adjustment thanks to slotted holes
Little adjustment or maintenance required
Molded switch allows it to be used as an end stop for small
and medium-sized doors
Application
RFID contactless safety switches are designed for use in safety
circuits, and are used to monitor the positions of movable protective devices. They monitor the positions of rotating, laterally
sliding or removable protective devices using the coded electronic actuator.
Their high degree of protection (IP69K) and the use of cleaning
product-resistant materials means that these switches are optimized for use under extreme environmental conditions.
Their electronic operating principle makes these switches ideal
for metalworking machinery.
The switches have a larger switching interval and switching displacement than mechanical switches, improve the mounting tolerance of the protective door, and offer a wide range of diagnostics options.
The RFID switches can be connected to all standard evaluation
units, e. g. a PLC, 3TK28 safety evaluation units (in which the
built-in crossover monitoring function can be deactivated), or the
3RK3 modular safety system.
The following safety categories can be achieved in safety circuits:
Category 4 according to EN ISO 13849-1 (EN 954-1)
PL e according to EN ISO 13849-1
SIL 3 according to IEC 61508
Type
3SE6 3
Type
Standards
IEC 60947-5-3,
IEC 61508,
EN ISO 13849-1
Input voltage
V DC 24 15/+10 %
Power consumption per input
mA
General data
Enclosure material
Fiber-glass
strengthened thermoplast, self-extinguishing
12
Safety inputs X1/X2
Safety outputs OSSD1/OSSD2
Max. rated operational current Ie
IP69K
Rated operational current Ie/DC-12/DC-13

at Ue
Ambient temperature
3SE6 3
Inputs/outputs
5
p operation
0.25
0.25
<1
-25 ... +70
Voltage drop Ue
During operation
Switching frequency
Hz
During storage, transport
-25 ... +85
Response time, max.
ms
100
30 g/11 ms
Risk time, max.
ms
200
10 ... 55 Hz
amplitude 1 mm
Recovery, max.
Shock resistance
Vibration resistance
800
100
Rated conditional short-circuit current

(PELV acc. to IEC 60204-1)
32
3
V DC 24 15/+10 %
Protection class
0.6
mA
0.5
No-load supply current I0
mA
35
12/106
Rated operational current Ie/DC-12/DC-13

at Ue
p operation
A
0.05
0.05
Voltage drop Ue
<2
Operational current
mA
150
Conductor capacity, max.
nF
50
III
13/108
Max. rated operational current Ie2 max
II
Overvoltage category
Smallest operational current Im
Diagnostics ouput

Siemens IC 10 2012
Mechanical Safety
SIRIUS
3SE6
Non-Contact
Safety Switches
SIRIUS 3SE6 RFID Non-Contact
Safety Switches
RFID
Technical data
Directions of approach and switching interval
Connector assignment
The side area permits a maximum height offset of the switch and
actuator of 8 mm (e.g. mounting tolerance or due to sagging of
the protective door). The transverse offset also equals max.
8 mm.
max. 18 mm
S ar
7
2
max. 8 mm
S ao
IC10_00090
Pin 1: A1 rated operational voltage 24 V DC

Pin 2: X1 safety input 24 V DC
Pin 3: A2 grounding
Pin 4: OSSD1 safety output
Pin 5: OUT conventional diagnostics output
Pin 6: X2 safety input 24 V DC
Pin 7: OSSD2 safety output
Pin 8: Not used
RFID switches
3SE6 315
IC01_00086
22
6,2
4,5
S ao < 10 mm
OSSD1 /
OSSD2
1
2 mm
IC01_00088
S ar > 16 mm
S OFF
78
74
S n = 12 mm
A-A
Sn
S ON
S OFF
S
18,5
Switching interval: output signal with hysteresis
M 12 x 1
25
RFID actuator
3SE6 310
A-A
4,5
x > S ar > 16 mm
U (OSSD1/
OSSD2)
IC01_00089
24 V
22
25
12
91
78
IC01_00087
6,2
0
< 200 ms
Switching interval: Output signal
13/109

Siemens IC 10 2012
12/107
Mechanical
SIRIUS
3SE6 Safety
Non-Contact Safety Switches
SIRIUS
RFID 3SE6 RFID Non-Contact Safety Switches
Selection
With M12 connector, 8-pole
Version/coding
Latching / length
DT Order No.
Price per
PU
PU
(UNIT,
SET, M)
PS*
1 unit
1 unit
1 unit
1 unit
1 unit
3SE6 315-1BB03
1 unit
3SE6 310-0BC01
Rectangular safety switches 91 mm x 25 mm

RFID safety switches
None
Individually coded,
programmable several times
None
Individually coded,
programmable once
None
Family coded
3SE6 315-0BB01
3SE6 315-1BB01
3SE6 315-0BB02
3SE6 315-1BB02
3SE6 315-0BB03
3SE6 315
RFID actuators
Standard
None
1 unit
3SE6 310-1BC01
1 unit
3SX5 600-1G
1 unit
3SX5 601-2GA03
1 unit
1 unit
1 unit
3SE6 310
Optional accessories
Covers and spacers

One pack (1 unit) contains 8 covers and 4 spacers
3SX5 600-1G
Connecting cables, 8-pole,
with 1 straight M12 socket
Rated voltage 30 V
Rated current 2 A
Length 3 m
Length 5 m
Length 10 m
3SX5 601-2GA05
3SX5 601-2GA10
3SX5 601-2GA
12
For monitoring units see Chapter 14, "Industrial Communication"
13/110
12/108
Siemens IC 10 2012

Catalog
Industrial
Controls
* You can order this quantity or a multiple
thereof.
Mechanical
Safety
SIRIUS 3SE6 Non-Contact
Safety Switches
3SE6 Magnetic Monitoring Systems

Magnet
General
data
3SE6 6, 3SE6 7 magnetically operated
switches
5,5
Overview
5,5
5
4
0_0
1
2
3
4
NSC
063
7a
Switching magnets and contact blocks
Enabling range (example)
A magnetically operated switch is comprised of a coded switching magnet and a contact block (sensor unit). Evaluation requires a safety relay or connection to a bus system.
The device has six current-sourcing semiconductor outputs

(Y1 ... Y6) which signal the state of the connected protective
devices.
3SE6 806 safety relays
The 3SE6 806 safety relay has two floating enabling circuits (safe
circuits) as NO contact circuits and one floating signaling circuit
as a NC circuit. The number of enabling circuits can be increased by adding one or more 3TK28 30 expansion modules.
Up to six protective devices (sensors) can be connected to the

safety relay.
Application
SIRIUS 3SE6 magnetically operated switches are designed for
mounting on movable protective guards (hoods, hinge switches,
doors, etc.). Evaluation can be performed by means of a safety
relay or through connection to a bus system.
The 3SE6 6 non-contact, magnetically operated safety switches
stand out due to their enclosed design with degree of protection
IP67. They are particularly suitable therefore for areas exposed
to contamination, cleaning or disinfecting.
A magnetic monitoring system comprises one or more magnetically operated switches and an evaluation unit, e.g. a safety relay. When contact blocks 1 NO + 1 NC are used the 3SE6 806
safety relay provides a high degree of protection against manipulation and can be installed in safety circuits up to Category 3
according to ISO 13849-1 (EN 954-1).
Combination of monitoring units and magnetically operated switches

Magnetically operated switches (contact block + switching magnet)
Achievable category
(EN 954-1)/
Performance level
3SE6 605-1BA 3SE6 605-2BA 3SE6 605-3BA 3SE6 604-2BA 3SE6 606-3BA (EN ISO 13849-1)
3SE6 704-1BA 3SE6 704-2BA 3SE6 704-3BA 3SE6 704-2BA 3SE6 704-3BA
1 NO + 1 NC
2 NC
1 NO + 2 NC
Relay outputs
SIRIUS safety relays,
6-fold
3SE6 806-2CD00
SIRIUS safety relays
3TK28 20
3TK28 26
Cat. 3
Cat. 4/e
Cat. 4/e
3TK28 40
3TK28 41, 3TK28 42, 3TK28 45
Cat. 3/d
Cat. 4/e

with contactor relay
3TK28 50, 3TK28 51, 3TK28 52

3TK28 53
ASIsafe compact
safety modules
3RK1 205, 3RK1 405
Solid-state outputs
Cat. 3/d
Cat. 4/e
Cat. 4
SIMATIC S7-31xF-2 DP SM 326 F, 24 DI, 24 V DC,

or
SM 326 F, 8 DI, NAMUR
SIMATIC ET 200M
Cat. 4
SIMATIC ET 200S
PROFIsafe
4/8 F-DI / 3 F-DO, 24 V DC

4/8 F DI, 24 V DC
Cat. 3
Cat. 4
SIMATIC ET 200eco
4/8 F DI, 24 V DC
SIMATIC ET 200pro
8/16 F-DI, 24 V DC,

4/8 F-DI / 4 F-DO 2 A, 24 V DC,
F-Switch
Modular Safety System 3RK3
12
Monitoring units
Cat. 4
Cat. 4
Cat. 4/e
Suitable magnetically operated switch

13/111
Siemens IC 10 2012
12/103
Mechanical Safety

Selection
3SE6

Design
Size
San ... Sab
mm
mm
Contacts
DT
Round sensor unit. IP67

3SE6 704-1BA
3SE6 605-1BA
Switching
magnet
(coded)
5 to 15
1 NO + 1 NC
Switch block with M 30

M12, 4-pole
male
receptacle1)
5 to 15
1 NO + 1 NC
3SE6 605-3BA,
3SE6 704-3BA
Switching
magnet
(coded)
25 88
Switch block with 25 88

1 m cable
5 to 15
Switch block with 25 88

M8 male
receptacle
5 to 15
3SE6 605-1BA02
0.130
3SE6 704-2BA
0.027
3SE6 605-2BA
0.165
1 NO + 1 NC
2 NC
0.165
3SE6 605-2BA01
0.040
3SE6 604-2BA01
0.130
3SE6 704-3BA
0.014
25 x 33
4 to 14
1 NO + 1 NC
3SE6 605-3BA
0.151
with 3 m cable
25 x 33
4 to 14
1 NO + 2 NC
3SE6 606-3BA
0.151
Spacer
for rectangular
sensor unit
25 88
3SX3 260
0.015
Spacer
for rectangular
sensor unit
25 33
3SX3 261
0.010
Rated control
supply voltage
Width
DC V
mm
Enable circuits/ Max. number

signal. circuits of connectable
sensors
Monitoring units
3SE6 806-2CD00
3SE6 604-2BA
Switch block
with 3 m cable
Accessories
3SX3 261
kg
0.166
Switching
25 x 33
magnet (coded)
3SX3 260
1 unit
3SE6 605-1BA
1 NO + 1 NC
2 NC
Weight
approx.
0.035
Rectangular sensor unit. IP67

3SE6 605-2BA,
3SE6 704-2BA
List
Price $
3SE6 704-1BA
M 30
Switch block with M 30

3 m cable
Order No.
24
2 NO / 1 NC
Order No.
3SE6 806-2CD00
List
Price $
Weight
approx.
1 unit
kg
0.200
1 NO + 1 NC
1) Pin 1 (S21) + Pin 2 (S22) = Normally Closed; Pin 3 (S13) + Pin 4 (S14) = Normally Open
Typical 4-pole Female Plugs with black 5 meter cable include: 3RX1542 (right-angle) or 3RX1513 (straight plug).
13/112

Mechanical Safety

General data
Magnet Switch Monitoring Unit
Magnet Switches
Type
3SE6 60.-1BA
3SE6 60.-2BA
3SE6 60.-3BA
Type
Form
M30,
25 mm x 88 mm
25 mm x 33 mm
Rated control supply voltage Uc
DC 24 V
3W
Standards
Sensing type
Rated voltage
Rated current
Performance
Max. switching frequency
DIN EN 50947-5-3 3)
DC 24 V
Rated power
(without signal outputs Y1 ... Y6)
400 mA
100 mA
Maximum load current
10 VA/W
1W
Signaling circuit Y1 ... Y6

Signaling circuit 31, 32
20 mA
2A
Inputs
6 sensors (1 NO or 1 NC)
5 Hz
Degree of protection acc. to IEC

60529
IP67
4 ... 14 mm
Fiber-glass strengthened with glass fiber
Operating
Storage
25 to +70 C
25 to +70 C
Shock resistance
10 g/11ms
Receptacle, male
Cable length (max for connecting

to monitoring unit)
Outputs
6 signaling outputs
1 relay output
2 enabling circuits
Response time
Permissible ambient temperature
Conductor
EN ISO 13849-1, EN 1088
AC/DC 100 V, 120 V
5 ... 15 mm
Vibration resistance
3SE6 806-2CD00
Rated control supply voltage tolerance 0.85 ... 1.2 x Us
Magnetic
Max. sensing distance San ... Sab

Housing material
Standards
10 ... 55 Hz, 1 mm amplitude

Cable LiYY 4 x 0.25 mm2
3 m length
M12, M8
1000 m
100 m
Automatic start
Manual start
150 ms typical
25 ms typical
Release time
20 ms max.
Recovery time
Degree of protection to IEC 60529
350 ms
IP20
Switching capacity 1)
Release circuits (13, 14 and 23, 24)

Continuous current, Ith
6A
AC-15 @ 203 V
DC-13
- 24 V
- 115 V
- 230 V
6A
Rated operational current, Ie 2)

6A
0.2 A
0.1 A
Short circuit protection

Fuse type
Duty class
- gL(gC)
- Quick response
Permissible ambient temperature, Tu
Operating
Storage
1) Utilization category per DIN VDE

0660, Part 200, IEC 60947-5-1
2) With all release circuits loaded

DIAZED
6A
10 A
25 to +45 C
25 to +70 C
3) In combination with monitoring unit

or AS-Interface.
13/113
Mechanical Safety

3SE6
Dimension drawings
Round sensor units
Switch block 3SE6 605-1BA02
Coded switching magnet 3SE6 704-1BA
SW 36
M12x1
M30x1,5
36,2
31,6
5
1,5
48,2
NSC0_00664
Switch block 3SE6 605-1BA
Rectangular sensor units

Switch block
3SE6 60.-2BA0.
Switch block
3SE7 704-2BA
3SX3 260 spacer
3,5
1,5
25
4,5
NSC0_00669
78
88
0,5
3
13
Switching magnet without lead
Coded switching magnet

3SE6 704-3BA
3SX3 261 spacer
Monitoring unit
Magnet Switch Monitor 3SE6 806-2CD00
120
105
45
7,5
100
90
86
60
88
NSC0_00666
13/114

Mechanical Safety

Technical data
Circuit diagrams
Connection example
Single Channel Control, Manual Start, Category 3 to EN ISO 13849-1
Six Channel Control. Automatic Start, Category 3 to EN ISO 13849-1
Terminal Assignments
Power
Sensors
A1+, L+
A2-, LS11, S12
S11, S22
S31, S32
S31, S42
S51, S52
S51, S62
Sensors
(Cont.)
Us
24 V DC
Channel 1, NC contact
Outputs
3SE6 604-2BA magnetically operated switch with 3TK28

safety relay, Category 4 to EN ISO 13849-1
S73, S74
S83, S84
S93, S94
13, 14
23, 24
31, 32
Y1 to Y6
Channel 1+2, NO contact (parallel)

Release circuit 1 (safety NO contact)
Release circuit 2 (safety NO contact)
Floating signaling circuit
Status of Channels 1 through 6
3SE6 604-2BA magnetically operated switch on AS-Interface

Safety at Work, safe K45F or K60F compact module, Category 4
to EN ISO 13849-1
L+
BU/S12
BK/S11
A1
Y11 Y12 Y32
Y34
Switch block connection

BK 11
WH 21
Y35 Y21 Y22

WH/S21
BN/S22
A2
14
K1
24
12 BU
22 BN
NSC0_00640a
K2
M
NSC0_00638a
The specified switching position refers to the basic position

when the cover, flap etc. is closed.

Abbrevitions for color designation of the connecting leads

acc. to IEC 60757:
BK = black
BL = blue
BN = brown
WH = white
13/115
Mechanical Safety
3SB3 Two-Hand Control

Selection
Application
Two-hand operation consoles
are required for use with machines and systems that have
hazardous areas, in order to direct both hands of the operator
to one position.
Operation consoles are primarily

used on presses, stamping machines, printing presses and paper converting machines, in the
chemical industry and in the
rubber and plastics industries.
Specifications
Two-hand operation consoles
fulfill the requirements laid down
in DIN 24 980 and EN 574.
The plastic version can be retrofitted with up to 8 command

points, in line with the customers
requirements. The surface of the
console has premachined
breaking points for this purpose.
Installation
Construction
Equipment
All consoles are pre-equipped
with SIGNUM 3SB3 control devices. The metal version is also
available as an unequipped
empty enclosure.
The two-hand operation consoles can be mounted either on

the stand available or directly on
the machine by means of the
holes in the rear panel.
Principle of operation
The control command is given
by pressing the two operating elements simultaneously (within
0.5 s of each other) and must be

maintained for as long as a hazard exists.

Design
DT
Order No.
List
Price $
Weight
approx.
1 unit
kg
SIGUARD two-hand operation console
3SB38 63-4BB
Degree of protection IP 65, acc. to DIN 24 980 (EN 574),

Standard equipment with 2 black operating elements
(mushroom button 3SB30 00-1GA11, 40 mm, 1 NO + 1
NC) and a red EMERGENCY-STOP mushroom button 3SB30
00-1HA20, latching 40 mm, 2 NC
Metal version
3SB38 63-4BB
- with standard equipment
3SB39 010AQ
4.800
- with standard equipment and 4 additional holes for control

devices 22.5 mm
3SB38 63-4BA
4.800
- empty enclosure, unequipped
3SB38 63-4BC
4.800
3SB38 63-1BB3
2.300
3SB39 01-0AQ3
4.500
Plastic version
- with standard equipment and predeterminated
breaking points for 8 further command points 22.5 mm
- with cable inlet holes for metric screwed cable glands
Stand for SIGUARD two-hand operation consoles
with cable inlet holes for metric screwed cable glands
Dimension drawings
3SB38 63-4 operator panel with metal enclosure
3SB39 01-0AQ stand

137
410
469
185
11,5
130
220
NSD0_01408
Note:
Also available with AS-Interface connection, contact your local Siemens
representative.
13/116


2014 IC Sec 13 Limit Switches

Uploaded by

Copyright:

Available Formats

2014 IC Sec 13 Limit Switches

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2014 IC Sec 13 Limit Switches

Uploaded by

Copyright:

Available Formats

Limit Switches

Position switches, standard

Safety hinge switches

Siemens Industry, Inc.

Position and Safety Switches

Safety switches with

Safety switches with

CE, UL, CSA

CE, TV, UL, CSA, CCC

CE, TV, UL, CSA, CCC

1 M20 1.5, 1 M20 1.5, 3 M20 1.5

M12 connector socket,

Siemens Industry, Inc.

SIRIUS 3SE5 International Limit Switches

All enclosure versions have an integrated chlorinated rubber

Popular versions of the position switches in standard enclosures

The 3SE5 switches are available in five different enclosure sizes

Position switches with plastic and metal enclosures

Open-type position switch IP20 or IP10

Standard, rounded and roller plungers

The actuator rollers are available with various materials and

Examples of selection options in the modular system

Twist actuators for twist levers and rod actuators,

Siemens Industry, Inc.

SIRIUS 3SE5 International Limit Switches

Optional LED indicators

LED indicators available for all enclosure sizes

Easy plug-in method for fast replacement of the actuator head

The enclosure versions can be supplied with an LED signaling

(1) Open cover

Fast connection method

For plastic enclosure with a width of 31 mm

The three-pole switching block (2 NC, 1 NO) in snap-action

These position switches can be wired quickly and easily as an

Siemens Industry, Inc.

SIRIUS 3SE5 International Limit Switches

Safety position switches

The 3SE5 position switches differ from the previous series

The ASIsafe electric component is integrated for the versions

Roller and angular roller levers

With the standard position switches, mechanical positions of

Twist levers and rod actuators

The devices are suitable for use in any climate.

The protective measure of "total insulation" by the molded-plastic

Siemens Industry, Inc.

SIRIUS 3SE5 International Limit Switches

Version with M12 connector socket or 6-pole + PE

Complete units Enclosure width 31 mm

Basic switches Enclosure width 31 mm

Angular roller levers

Basic switches Enclosure width 31 mm

Siemens Industry, Inc.

SIRIUS 3SE5 Mechanical Position Switches

SIRIUS 3SE5 International Limit Switches

3SE5, plastic enclosures

Selection and ordering data

Snap-action contacts, integrated3)

Slow-action contacts with makebefore-break

Slow-action contacts with makebefore-break