Scribd
Upload
7K views2 pages

MMI 3G Firmware Emergency

This document provides instructions for performing an emergency update of the MMI 3G system. It involves 11 steps: 1) switching on the MMI 3G, 2) accessing the green menu, 3) changing system settings, 4) inserting an update SD card, 5) selecting the emergency update option, 6) waiting for the update to complete automatically through multiple cycles, 7) verifying the new software version, and 8) optionally installing map updates.

Uploaded by

s
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7K views2 pages

MMI 3G Firmware Emergency

This document provides instructions for performing an emergency update of the MMI 3G system. It involves 11 steps: 1) switching on the MMI 3G, 2) accessing the green menu, 3) changing system settings, 4) inserting an update SD card, 5) selecting the emergency update option, 6) waiting for the update to complete automatically through multiple cycles, 7) verifying the new software version, and 8) optionally installing map updates.

Uploaded by

s
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MMI 3G Emergency Update

Version 1.2 Q1 2014 (by KG)


Step Instructions
1.
Switch on the MMI 3G.
2.
Enter the green menu (First press Setup and then CAR and hold both buttons down
simultaneously for approx. five seconds until the display changes.)

3.
Green menu comes up

4.
Go to System Internal and change to ROW and press return

5.
Go to SWDL and tick Ignore region and variant and press return

6.

Insert the firmware update I have sent you into the MMI unit slot SD1.

7.

Go to System and press emergencyupdate, and then press Yes.

8.

MMI will now reboot and enter EmergencyUpdate screen:

Please Note: The deletion and programming processes are performed several times, until all
components of the MMI have been updated. Wait until the programming process is finished
and the system automatically restarts. Your input is not necessary, the flash tool will begin
deleting all the existing flash information in this step.
9.

Once the above step is completed the programming screen will appear:

Please note: No input is necessary from you, the update tool will perform everything
automatically.
10.

Once the MMI emergency update is completed, you will need to enter engineering menu to
verify the version of your MMI, to do this first press Setup and then Return and hold both
buttons down simultaneously for approx. five seconds until the display changes.

Note: You can quit the software download process at any time by simultaneously pressing
and holding the Tone and Back buttons for more than five seconds.
11.

If the update completed successfully then you should now proceed with map installation.

You might also like