Scribd
Upload
230 views4 pages

GRI 4613 Data Sheet

The 4612 Curtain Door Switch Series from GRI solves problems with curtain door installations. It can be installed on either the left or right side and the probe can be inserted from the top or bottom for flexibility. The switch has an adjustable travel distance up to 3 inches and comes with a 3 foot armored cable and mounting hardware.

Uploaded by

JMAC Supply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
230 views4 pages

GRI 4613 Data Sheet

The 4612 Curtain Door Switch Series from GRI solves problems with curtain door installations. It can be installed on either the left or right side and the probe can be inserted from the top or bottom for flexibility. The switch has an adjustable travel distance up to 3 inches and comes with a 3 foot armored cable and mounting hardware.

Uploaded by

JMAC Supply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Home

Products

About GRI

Contact GRI

Where to Buy

Testimonials

What's New!

4612 Series Curtain Door Switch Sets


Up To 3" travel
Reversible Probe Assembly
Left or Right Installation
Install Probe Top or Bottom
3 Armored Cable Standard
Magnet Mounts in Door Channel
Mounting Hardware Included
G.R.I. has solved the curtain door installation problem with the 4612 Curtain
Door Series. The 4612 resolves the left or right installation problem plus allows
the installer to adapt the install dependant on the application. G.R.I.s unique
probe design allows the switch to be inserted either from the top of the switch
or the bottom allowing access determined by the application.

4612
Curtain Door Series

4612
Curtain Door Series

Product Specification PDF's

About PDF

MINI CURTAIN
DOOR SWITCH
4612 Curtain Door Series
Adjustable Travel

Reversible Probe Assembly

Left Or Right Installation

Install Probe Top Or Bottom

3 Armored Cable Standard


Magnet Mounts In Door Channel
Mounting Hardware Included

Application Notes:
G.R.I. has solved the curtain door installation problem with the 4612 Curtain Door Series. The
4612 resolves the left or right side installation problem and gives the installer the ability to be quite
clever with making this switch and magnet suitable for the installation . G.R.I.s unique probe design
allows the switch to be inserted either from the top of the switch or the bottom allowing access determined by the application.
Parts Notes:
Replacement nylon cable clamps .437 x .525 x .375 x .140 (GRI part number 7548) and screws are
socket set 1/4-20 x 3/8 knurled cup point (GRI part number 7704).
PART NUMBERS:
Up To 2 Gap

Closed Loop
4612

GEORGE RISK INDUSTRIES, INC.


G.R.I. PLAZA
KIMBALL, NE 69145
MADE IN U.S.A.

SPDT
4613
TOLL-FREE 1-800-445-5218
TOLL-FREE 1-800-523-1227
(308) 235-4645
FAX (308) 235-3561
E-MAIL: [email protected]
WEB SITE: www.grisk.com

MINI CURTAIN
DOOR SWITCH
GRI Tech Note For best performance and operation of this product, the magnet must be
positioned at one end or other of the switch. Do not position the magnet in the middle of
the switch.
INSTALLATION INSTRUCTIONS:
The GRI Mini Curtain Door Switch should be mounted as close to the edge of the curtain
door as possible. Mount the switch on the door rail channel. Pay close attention to the
operation of the contact and allow for adequate gap and travel for your particular installation.
Close the door. Temporarily mount the magnet with tape in one of the door indentations.
Now slowly roll the door up completely to make sure the magnet does not hinder the doors
operation in any way. Close the door while again checking for interference. Now you can
adjust the magnet for travel and gap. You can alter how much opening distance is required
to trigger the alarm by moving this powerful magnet closer to or further away from the
switch. This flexible installation technique solves a host of problems ranging from the new,
tightly tuned doors to loose fitting, worn or damaged doors. When the magnet is placed
properly, permanently mount the magnet by using the plastic clamps and screws that are
provided or use rivets.
Attach wires and test again by opening/closing the door. If cable guides are necessary GRI
suggests using the empty switch case for the 4612, part number C-4612.

DRILL AND TAP FOR


1/4"-20

1.750 2.500

.375

.736
.958

4612

Cable Guide
Preferred Installation

GRI products meet or exceed these minimum general specifications:


PART
NUMBER

4612
4613

LOOP
TYPE

CLOSED
OPEN/CLOSED

ELECTRICAL
CONFIG.

N/O
SPDT

REED
FORM

MAXIMUM
INITIAL CONTACT
RESISTANCE
()

MAXIMUM
CONTACT
RATING
(W)

MAXIMUM
SWITCHING
VOLTAGE
(VDC)

MAXIMUM
SWITCHING
CURRENT
(A)

A
C

0.150
0.140

10
5

160
175VDC

0.400
0.250

Warranty:
Lifetime warranty against workmanship, material and factory defects.
GEORGE RISK INDUSTRIES, INC.
G.R.I. PLAZA
KIMBALL, NE 69145
BA-178 Rev. I 4/05/2011

MADE IN U.S.A.

TOLL-FREE 1-800-445-5218
TOLL-FREE 1-800-523-1227
(308) 235-4645
FAX (308) 235-3561
E-MAIL: [email protected]
WEB SITE: www.grisk.com

You might also like