Scribd
Upload
307 views1 page

Force Work Energy and Power

This document contains solutions to problems involving force, work, energy and power. The problems calculate average force from deceleration data, average braking force of a car, maximum speed down a slope given braking power limits, whether work is done on a lift moving at constant speed, how a girl increases her mechanical energy bouncing on a trampoline, and the reading on a scale in an accelerating lift and the energy used by the lift motor over time.

Uploaded by

ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
307 views1 page

Force Work Energy and Power

This document contains solutions to problems involving force, work, energy and power. The problems calculate average force from deceleration data, average braking force of a car, maximum speed down a slope given braking power limits, whether work is done on a lift moving at constant speed, how a girl increases her mechanical energy bouncing on a trampoline, and the reading on a scale in an accelerating lift and the energy used by the lift motor over time.

Uploaded by

ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Force, work, energy and power answers

-1

(Take g = 9.8 Nkg where needed)


1. A dummy is used in a test crash to test the suitability of a seat belt. If the dummy had a mass of 65 kg and it was brought to rest in a
distance of 65 cm from a velocity of 12 ms-1 calculate
(a) The mean deceleration during the crash, and
(b) The average force exerted on the dummy during the crash.
-2
(a) [110 ms ] (b) [7200N]
-1

2. A car travelling at 30 ms along a level road is brought to rest in a distance of 35 m by its brakes. If the car has a mass of 900 kg
calculate the average force exerted by the brakes
If the same car travels up a slope of 1 in 15 at a constant speed of 25 ms -1 what power does the engine develop if the total frictional
resistance is 120 N?
(a) [11570N] (b) [17700W]
3. What is the maximum speed at which an earth-mover of mass 250 000 kg can descend a slope of 1 in 10 if the brakes can dissipate
energy at a maximum rate of 2000 kW?
3
-1
Power = 2000x10 = 250000x9.8xv/10 therefore v = 8.16 ms
4. A lift is raised at a constant speed. Is the total work done on the lift positive, negative or zero?
5. A girl bounces on a trampoline getting higher and higher each time she bounces. How is she able to increase her total mechanical
energy?
6. A lift has a mass of 400 kg. A man of mass 70 kg stands on a weighing machine fixed to the floor of the lift. Four seconds after starting
from rest the lift has reached its maximum speed and has risen 5 m.
(a) What will be the reading on the weighing machine during the period of acceleration?
(b) How may it be decided whether the acceleration was uniform?
(c) How much energy will be used by the lift motor in (i) the first four seconds, (ii) the next four seconds?
(a) [729.75N] (b) [constant reading] (c) i [24498 J] ii [46060J]

Force, work, energy and power answers


-1

(Take g = 9.8 Nkg where needed)


1. A dummy is used in a test crash to test the suitability of a seat belt. If the dummy had a mass of 65 kg and it was brought to rest in a
-1
distance of 65 cm from a velocity of 12 ms calculate
(a) The mean deceleration during the crash, and
(b) The average force exerted on the dummy during the crash.
-2
(a) [110 ms ] (b) [7200N]
-1

2. A car travelling at 30 ms along a level road is brought to rest in a distance of 35 m by its brakes. If the car has a mass of 900 kg
calculate the average force exerted by the brakes
If the same car travels up a slope of 1 in 15 at a constant speed of 25 ms -1 what power does the engine develop if the total frictional
resistance is 120 N?
(b)[11570N] (b) [17700W]
3. What is the maximum speed at which an earth-mover of mass 250 000 kg can descend a slope of 1 in 10 if the brakes can dissipate
energy at a maximum rate of 2000 kW?
Power = 2000x103 = 250000x9.8xv/10 therefore v = 8.16 ms-1
4. A lift is raised at a constant speed. Is the total work done on the lift positive, negative or zero?
5. A girl bounces on a trampoline getting higher and higher each time she bounces. How is she able to increase her total mechanical
energy?
6. A lift has a mass of 400 kg. A man of mass 70 kg stands on a weighing machine fixed to the floor of the lift. Four seconds after starting
from rest the lift has reached its maximum speed and has risen 5 m.
(a) What will be the reading on the weighing machine during the period of acceleration?
(b) How may it be decided whether the acceleration was uniform?
(d) How much energy will be used by the lift motor in (i) the first four seconds, (ii) the next four seconds?
(a) [729.75N] (b) [constant reading] (c) i [24498 J] ii [46060J]

You might also like