Scribd Logo
Upload

Welcome to Scribd!

  • 111 views

    UMTS Timers

    Uploaded by

    Waheed Ali Bangash
    This document describes various timers used in WCDMA/UMTS networks. It lists 17 timers (T300-T317) and provides details on what triggers each timer to start and stop, and what action is taken when it expires. The timers control procedures like connection establishment, cell updates, capability information exchange, and radio link monitoring in different RRC states including idle, cell/URA pch, cell fach, and connected mode.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    UMTS Timers

    Uploaded by

    Waheed Ali Bangash
    111 views2 pages
    This document describes various timers used in WCDMA/UMTS networks. It lists 17 timers (T300-T317) and provides details on what triggers each timer to start and stop, and what action is taken when it expires. The timers control procedures like connection establishment, cell updates, capability information exchange, and radio link monitoring in different RRC states including idle, cell/URA pch, cell fach, and connected mode.

    Original Description:

    UMTS Timer

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes various timers used in WCDMA/UMTS networks. It lists 17 timers (T300-T317) and provides details on what triggers each timer to start and stop, and what action is taken when it expires. The timers control procedures like connection establishment, cell updates, capability information exchange, and radio link monitoring in different RRC states including idle, cell/URA pch, cell fach, and connected mode.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    111 views2 pages

    UMTS Timers

    Uploaded by

    Waheed Ali Bangash
    This document describes various timers used in WCDMA/UMTS networks. It lists 17 timers (T300-T317) and provides details on what triggers each timer to start and stop, and what action is taken when it expires. The timers control procedures like connection establishment, cell updates, capability information exchange, and radio link monitoring in different RRC states including idle, cell/URA pch, cell fach, and connected mode.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    WCDMA/UMTS

    Timer
    T300

    T302

    T304

    T305

    T307

    T308

    T309

    T310

    T311

    T312

    T313

    T314

    T315

    Function when Start/Stop/at expiry


    >>Starts at the transmission of RRC CONNECTION REQ
    >>Stops at the receipt of RRC Connection setup
    >> At expiry, re-transmits RRC CONNECTION REQ if V300<=N300, ELSE go to
    IDLE Mode
    >> Starts at the transmission of Cell Update or URA Update
    >> Stops at the receipt of Cell Update Confirm or URA Update Confirm
    >> At expiry, re-transmits Cell Update/URA Update if V302<= N302 Else go to
    IDLE Mode
    >> Starts at the transmission of UE Capability Info
    >> Stops at the receipt of UE capability Information Confirm
    >> At Expiry, re-transmits UE capability information if V304<=N304, Else initiate a
    Cell Update proc
    >> Starts upon entering CELL_FACH/URA_PCH/CELL_PCH state. OR upon
    receipt of CELL Update Confirm/URA Update Confirm
    >> Stops upon entering another state
    >> At expiry, transmits CELL Update if T307 is not activated and UE detects "In
    Service Area" Otherwise If T307 is not active, initiate starting of timer T307
    >>Starts when timer T305 has been expired and UE detects the " Out of Service
    Area"
    >>Stops when UE detects "In Service Area"
    >>At Expiry it transit to the IDLE MODE
    >> Starts at the transmission of RRC Connection Release Complete
    >> Not Stopped
    >> At Expiry, transmits RRC connection Release Complete IF V308<=N308 ELSE
    GOTO IDLE MODE
    >>Starts upon receipt of Cell Change Order from UTRAN message
    >> Stops upon successful response to a CONNECTION ESTABLISHMENT
    REQUEST in a new CELL
    >> At Expiry, resumes the Connection to UTRAN network
    >> Starts upon transmission of PUSCH Capacity Request message
    >> Stops upon receipt of Physical Shared Channel Allocation
    >> At expiry transmits PUSCH Capacity Request if V310 <= N310 ELSE stops the
    procedure
    >> Starts upon reception of Physical Shared Channel Allocation ( When "PUSCH
    ALLOCATION" set to "PUSCH ALLOCATION pending")
    >> Stops upon receipt of Physical Shared Channel Allocation ( When "PUSCH
    allocation" set to "PUSCH allocation assignment")
    >> At Expiry, UE initiate a PUSCH CAPACITY REQUEST procedure
    >>Starts When UE starts to establish dedicated channel mode
    >>Stops When UE detects N312 "in sync" indication from Layer-1(PHY)
    >>Timer expires when criteria for physical channel establishment failure is fulfilled
    >>Timer Starts when UE detects consecutive N313 "out of sync" indication from
    Layer-1(PHY)
    >> Stops when UE detects consecutive N315 "in sync" indication from Layer1(PHY)
    >> Timer expires when the criteria for Radio Link failure is fulfilled
    >>Starts after the criteria for radio link failure have been fulfilled, and if radio
    bearers associated with T314 exists.
    >>Stops when the cell update procedure completes
    >>REFER 8.3.1.13 in 3GPP TS 25.331 Specification
    >>Starts after the criteria for radio link failure have been fulfilled, and if radio
    bearers associated with T315 exists.
    >> Stops when the cell update procedure completes
    >> REFER 8.3.1.14 in 3GPP TS 25.331 Specification

    T316

    T317

    >>Starts when UE detects "out of service area" in the URA_PCH or CELL_PCH


    state
    >>Stops when UE detects "in service area"
    >>At expiry, initiates cell update procedure if "in service area" is detected,
    OTHERWISE starts timer T317,
    transit to CELL_FACH state and initiate cell update procedure when the UE
    detects "in service area"
    >> Starts when timer T316 expires OR when in CELL_FACH state, UE detects "out
    of service area"
    >> Stops when UE detects "in service area"
    >> At Expiry, transits to IDLE MODE

    You might also like